Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
@@1989hainoki Good point! He really should be more conscious of personal safety if he wants to endure! Wearing out and damaging one's body through heavy work, or dangerous procedures is very real. It doesn't need to be a catastrophic accident, but damage that builds over time. Cheers!
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!! Yet another awesome video my friend! God bless you ❤❤❤
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :( Best wishes!
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
Nice boat Mr Ho. My first time watching your channel - and now a subscriber. Excellent job on the build , truly a man of many talents Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something - Well done again Mr Ho .... I'm off to watch some more of your videos... ☘️
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on RUclips asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so, favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
So much knowledge, from motors, fiberglass and electronics, I'm sure to only name a few. You should be so proud to have all this skill that you can teach and pass down to your children. Wish I had your knowledge and the skills to bring it all together. You should be very proud! Thank you for showing us what you can do! Great Job Sir.!
Why do so many of you commend these builders for their skills, when their doing things either improperly or the hard way? There were several steps they did which were unnecessary. Some were done late or at the incorrect time. Some other details were done completely incorrect. While others just seamed like they hadn't thought out the process. If your intent is to just say, "Wow, that's a cool boat", then I agree. They have plenty of drive and I suspect they'd be open to learning more efficient and effective ways to go about their trade. Their actual practice and implementation of said skills, however, is not impressive.
@@bensprink9943 First of all, Vietnam is not a third world country. That's not an excuse when you do steps out of order. It's not an excuse to smash an oil seal or bearing into place, either. It was obvious that a lathe was available, but wasn't used for several steps. The propshaft is not straight, but could've been. I could go on and none of it is excused by your comment.
Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Jf
wont be able to see in a couple of years if he keeps using his hand as a welding mask
@@1989hainoki Good point! He really should be more conscious of personal safety if he wants to endure! Wearing out and damaging one's body through heavy work, or dangerous procedures is very real. It doesn't need to be a catastrophic accident, but damage that builds over time. Cheers!
One of the best youtubers around, Mr Ho never ceases to amaze !!! Can't wait for the next video, more please ;-)
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
This is impressive to say the least! Sounds like a absolute beast!
I built boats for 20yrs still to this day we use fuck all tools a grinder, sandpaper, orbit sander, drill and thats about it.
@damianmurray1792 hats off to u man! That's freekin awesome! Very cool skill/ knowledge to have..
This guy is a mechanical genius.
Minimal? Drill press, lathe, arc welder, plasma cutter …
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's all you do is comment
😊
Good! Hi
Очень долго не было Вашего видео 😱. Ещё раз скажу, Вы гений. Очень интересно смотреть Ваши работы. Однозначно супер 👍👍👍
Well, not a genius, just a bored man with a lot of money
You just became my first non-English speaking channel subscription! Great work!
U did what us regular people wish we could! Good for u brother!
Hi Mr Ho! I'm new fan from Spain.
Just want to say that your work is awesome!!! 👏🏻👏🏻👏🏻
We are waiting for the next surprise
Amazing project and skill. You are very talented and your video build was excellent. Great job and thanks for sharing.
Recently bought my self a medium mini speed boat and watching this is just fascinating, beautiful work
This guy should have aleast 1Million subscribers by now.
Awesome work 👍👍
These builds never get old
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
You should make the seating how they sit in f1 cars then produce a bunch of them and sponsors a race, it might catch the right eyes
U know ur thing
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Việt Nam rất tự hào vì có một người tài giói sáng chế như bác
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Did you see how he molded the hull? Impressive.
Love it brother I always look forward to your project. Keep it 👍
That is absolutely awesome. If I had the money I would fund you to build custom mini boats like that.
My friend you are definitely blessed.
Looks to be very fast , at least 70!to 75 mph !!!
So awesome this bad ass powerboat
You guys are the best builders
That's pretty cool Mr Ho. The smile on your face after the last run, says it all 👍😊
บารมีที่ขลบ9
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!!
Yet another awesome video my friend!
God bless you ❤❤❤
Can I tell you how awesome your work is when I clearly have not finished the video?
W O W!!!! That is Awesome! That looks like it is seriously fun and seriously fast! Well done Sir, Well Done!
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
A beautful craft, awesome work as always!
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :(
Best wishes!
Came here to say the same thing!
Giởi từ cơ khí tới phần máy.. Gia công thân thuyền.. hoàn thiện, ÐI dây cũng gọn gàng 👍👍👍
Just EPIC . You're a professional car , boat , bike or whatever you get your hands on . 💯❤️👍🙌
Amazing, so much skill!
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
Rryryrrrryitryrrgfuuy
How much to buy one ???
❤😮
😮❤
Nice boat Mr Ho.
My first time watching your channel - and now a subscriber.
Excellent job on the build , truly a man of many talents
Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something -
Well done again Mr Ho .... I'm off to watch some more of your videos...
☘️
Glad to see you are still at it Mr Ho! You will always be one of my hero’s. Another great job Sir!
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
Kinda nice when they just build and don't have to talk about losing the shop every five minutes
Sometimes to make things perfectly we take a hassle when we can make things easier.
That's what because they make things for business an justify the price with the effort,but when it's a personal project,it can be done simpler.
He's got pretty well calibrated eyeballs
saya dari indonesia sangat suka konten ini , boleh saya bertanya itu memakai mesin bekas apa ya tuan Ho 🙏
Always impressive to see the little speed monsters you craft!
Man that looks fun!! Great build!!
I'm just gunna put it out there mechanically inclined isn't he word for this this is some of the best videos on RUclips asmr type stuff but that's just a piece you and the other people that do these videos like this is super impressive ik your not the only one I'm really complementing all the fellas and women that do this knowing even us Americans or whoever can't understand the language or read the comments sometimes but yet we can understand what goes on by actions to whom it may concern please continue these types of videos I also feel yall creators are not getting the credit yall deserve I appreciate these for sure thank yall
J'attends toujours avec impatience les nouvelles vidéos ! Beau travail (comme d'habitude)! Merci beaucoup ! 🤗 👏👏👏
Nice build Ho.👍🏻
You know your good when you make that all look so easy
All this work with a welder, handtools and a metal lathe.
That jump out of the water launch is amazing!! Well done sir!!!
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
How long did it take to type all those little symbols in your comment, respect
😊
@@beemerkon there are non english keyboards
@@GhulamAli-kj3tx 4
please ty❤đ
wow! As a tool maker, I am super impressed! Skills 100%
Amazing I enjoy watching people build something from many different parts.
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
You are certainly a fabrication and mechanical genius as well as a highly skilled and knowledgeable Craftsman! Brilliant!
Can you imagine how much stronger it would run with proper expansion chambers?
It would be sick. Good job my man .
Or if he port matched that exhaust, Jesus Christ that was rough
@@BikingVikingHH yes and pipes it would scream, I dedicated 17yrs to the high performance 2 stroke industry and enjoyed every day of it.
Mr Ho, you sir are truely talented man! Thanks for sharing and bringing a smile to my day!
As always Mr. Ho another great video you are a gifted person. Keep it up and God bless.
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so,
favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
That’s amazing, I want to buy one, how much?
Wow! That was absolutely amazing! Wish I had your skills.
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
I was missing you Mr Ho! Excellent build, congratulations!
This guy is second to none. Brilliant in everything he does. First class work.
That boat rips! Congrats on the build, she's marvelous!
You are amazingly skilled in every way ! Awesome work. Please keep on going !!!
He’s back! You make it all look so easy. Super inspiring stuff. Gotta turbocharge one of these engines!
Классная работа, Поздравляю, Молодец! 👍🏻😊
Its always fun watching him work with the fiberglass and finishing since its the stuff i do at work.
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
My thoughts are to have wood stringers for rigidity and also to bolt the motor mounts to
Anh mải là đỉnh cao vược ngoài mong đợi ❤
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
Amazing speed boat👍
...мне 64 года -- Удивлён!!!
Парнишка Гений и и руки его растут не из задницы😊😊😊.
Обалденный вариант, молодчага🤝🤝🤝 так держать себя всегда✌✌✌✌✌
Очень интересно получилось! Классно, без лишних слов, всё по делу! Удачи и процветания вам в вашем хобби!
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
Mr. Ho, Bạn thật tài giỏi, ai rủng rỉnh tiền thì mua thuyền chứ ra ngoài tự đóng một chiếc mà không biết hướng dẫn thì sao? Tuyệt vời
Chất luôn! Việt Nam vẫn có những người nông dân giỏi
Man this is awesome! I've always wanted to build a mini boat like this
Super nice, I think you could sell these as fast as you can build them Great job
Mr. Ho is so cool!!! Wish my parents were like that!😃
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
Pure engineering art. Love it!😍
Классный аппарат получился!👍🏻
Kênh như này lẽ ra phải được vinh danh lên đài truyền hình quốc gia 🇻🇳👍
you are very talented sir a job well done.
Great job. I'd like to see expansion chambers on each cylinder for your exhaust. You'd get crazy mid and top end pull. 28:34
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
Keep it up Mr.Ho, one day you Will have your own factory..😊
Замечательно 👍, молодцы 👏 моделисты конструкторы 👍👍👍👍👍👍👍🙏💯💯💯
Quá tải giỏi 👍👍👍⭐️⭐️⭐️. Con làm đi xuất khẩu qua Campuchia và thái lan. Là con giàu!!!
Chúc mừng con ❤❤❤
THAT is crazy….. for all the right reasons! Great build! :)
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
Your boats are getting more and more professional looking every time! That boat is very quick!!!
it's a pleasure watching you do what you do
Love your builds. You're a youtube treasure bud!
Amazing build. Only comment I have is I would have laid up several more layers of fiberglass and put in some additional wood in key stress areas
Stringers
@@LifenSantaBarbara Yup
Far out, round 2 made a huge difference!! Nice job guys!!
Absolutely amazing engineering I hope you teach your skills to others.
I don't know when I first realized that you guys totally knew what you were doing! I'm enjoying this the boat really looks great!
So much knowledge, from motors, fiberglass and electronics,
I'm sure to only name a few.
You should be so proud to have all this skill that you can teach and pass down to your children.
Wish I had your knowledge and the skills to bring it all together.
You should be very proud!
Thank you for showing us what you can do!
Great Job Sir.!
Proud of your hard work. Please keep inventing, hope your kids learn from your hard work.
Great video and super boat. Great to see a no nonsense approach to building excellent boats.
Great boat Mr Ho
Would like to see a video of how you made your dock, or Jetty. That looks great
Нереально крутое видео! Светлая голова и золотые руки! 👍
That thing looks like it would be a blast. Only missing one thing. Needs a couple of fishing pole holders😅
Kênh càng ngày càng làm giỏi !
Đồ làm vỏ ca nô đã có khuôn Composit khá chuyên nghiệp !
I'm always impressed by the innovation in these tiny homemade boats
#were3eeeeeeeeeeeeeeeeeeeeeeeeeeeee333eeeee33eeeeeeeeee3😊¢333³🎉were3e3
yygyyy
Why do so many of you commend these builders for their skills, when their doing things either improperly or the hard way? There were several steps they did which were unnecessary. Some were done late or at the incorrect time. Some other details were done completely incorrect. While others just seamed like they hadn't thought out the process.
If your intent is to just say, "Wow, that's a cool boat", then I agree. They have plenty of drive and I suspect they'd be open to learning more efficient and effective ways to go about their trade. Their actual practice and implementation of said skills, however, is not impressive.
@@tomb816 because it's a third world country and they make due with what they have.
@@bensprink9943 First of all, Vietnam is not a third world country. That's not an excuse when you do steps out of order. It's not an excuse to smash an oil seal or bearing into place, either. It was obvious that a lathe was available, but wasn't used for several steps. The propshaft is not straight, but could've been. I could go on and none of it is excused by your comment.
Класс, мужик ты гений,!!!
I absolutely love this design, reminds me very much of the aesthetic of a Homeworld ship :D
I’m 😊so 😊😊
😊😊😊😊😊😊😊😊p😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
I’m 😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
Damn man, I'm impressed as hell. You have some very high level skills. What a great little boat.
Amazing as always Mr. Ho! Well done!