After watching you guys for several years, i honestly expected to see the jetboat in your pool for the"floating test"🤣 I'm pretty sure, if it wasn't that heavy you guys would have done it! Keep it up boys!
@@rileymannion5301 sure! Can't way for it😅. Also the could do an water2air intercooler setup like they were doing the coolant for the enigne. Should work right? Its of course not the best way but they're the boostedboiz right?😀
Imagine how nice and cold an air to water intercooler will keep those charge temps! Endless supply of cold water and you already have a built in water pump.
@@dailying3049 are you implying that kids like lil tuner engines? Why would wanting to see an actual fast boat be a boomer thing? You could squeeze a v driven V8 in that easy & it would be a fuckin rocket ship lol. Not only is it sad to use a 4cyl, but also making it jet drive??? Do you know how inefficient jet drives are, or?....
Awesome too see how excited you both got while driving. Bet it feels great building something from scratch and seeing it perform so well. Great job Boosted Boiz.
The fact that you let Wyatt do the first drive shows how much you guys got each other's back! You two are amazing and what you guys do is hella motivational! Keep up the amazing work fellas! 👏
It's not that serious. Do you always get overly emotional over random sh*t? I can't imagine what it was like after you watched brave heart. You probably dressed up as Mel Gibson and rescued feral cats.
Kyle, after seeing the humble beginnings of the boostedboiz channel, you've made it quite far in such a short time. Congrats on all of your success. I cant wait to see what you decide to wrap this boat in... HONDA POWER jetboat wrap??? easy win
I personally think a supercharger would be better than a turbo in that thing considering you don’t need much boost and instant torque is what you want in a boat.
Dude, absolutely. Just check out ANY even tiny bit fast boat.... supercharged. Change the old saying a little..."Turbos are nice, but I'd rather be BLOWN.... especially in your more performance oriented marine application..." Now that's gotcher double entender, nerd-speak ending, AND logic one cannot ignore!!!
Absolutely a supercharger would be the way to go, but cost wise it’s gonna be a turbo. They probably already have everything they need sitting in a box somewhere lol. Either way I’m pumped for it.
Once you get that trim set up and tuned you’ll be close to 55 mph. I believe it will take a little load off the engine once trimmed out as well. Bout had a heart attack when I seen it without a turbski though. Gonna be silly with a turbo! Nice work!!
i don't know if 10 mph is going to happen with just tabbing the boat... i get 5 from mine ... especially considering there is more weight to be added in the boat (which all in the comments have not commented about in their guesstimates).... it will gain speed but also remember boyz that also adds rpm to the motor ... back to the extra weight ... seats, poly bottom, mounts for seats, sound bar (cause it has to have one lol ... and amps prob a 10 which i see room for).. then a suggestion, foam filler (for floatation and in case the thing does get a hole)... also didn't see bilge pump (boys that is a must) ... and cause FL sun is nightmare sometimes, a bimini top (which will slow it down but will feel like AC underneath it)... Boyz also don't forget to register and put a real engine kill system ... USCG mandatory item ... like that found on your jet skis cause a kill switch will still get you fined ...
@@xblackaquamanx8070 stay tuned then. He was pushing water so bad i don’t see a problem. Yep more weight…engine wasn’t even tuned. Get that front end out of the water and that’s gonna cut the drag in half. It really doesn’t matter. As long as they are having a good time.
consider rerouting the exhaust through the back of the transom just at the waterline that would help keep the noise down , like the bigger jet boat do they still sound very nice and you could have a conversation with out having to yell too loud
These jet boats are such good content. Fun custom builds, super fun with relatively low horsepower, and people enjoying their days on the water. Love it!
I grew up jet boating with my old man. They're just like hot rods with all the different combos people put in them. And not having to worry about any kind of gear box or trans makes them really fun to just concentrate in the engine and the impeller sizing, that's it.
Make sure your vtec is set to turn on below the OEM temp, 135F i think, if you're going to continue to run it just warm all the time. That thing is dope.
@@ericnelson6982 if they are running it in the salt water the thermostat will rust away pretty quickly I’m sure there could be a better option that’ll last longer
I'd put a nice tiny turbo on it so it spools up faster and gets power earlier. I think it would drive a shitload better if it had more power off the bottom. Anyways that's just my $0.02 cents. Cheers boys!
It's great watching the Boiz work getting better and better. I've worked and played on and around boats my whole life ( I'm an old dude). the way you boiz handle yourself impressed me ( maybe the seats, but I've been there). Respect the water don't fear it and you will have a great time.
Nice work guys, job well done. Those little boats are really nicely designed. 46 m.p.h. is pretty decent considering you weren’t able to trim it up or anything. It’ll be great to see what a turbo will do for speed, maybe get 60 m.p.h. out of her would be pretty awesome. 👍👍🇨🇦
So cool that you guys had such a good test rip in the jet boat. Keep up with the progress so you guys can enjoy this thing as much as possible for the rest of the summer.
@@boostedboiz Top shelf editing right there, son. You kept her booty out of that shot like a pro. lol That boat is gonna rip. Please be careful. You think a hydro-locked engine is bad news, wait till you hydro-lock your lungs. Be super safe on the water. Cars don't sink, boats do.
Supercharge it. Turbo you have to worry about oil feed and drain lines. I simple supercharger will be great. Plus it's different from your usual turbo stuff
@@Rx_Lee something like a jackson racing/eaton/magnuson unit sure, but a centrifugal that doesn't mount directly to the engine wouldn't have to be k24 specific, something like a rotrex c30-94 or a vortech v5, you'd just need a bracket and belt and then bring your own charge piping
Love it! If the coolant is running that cool, check to make sure you don't have any coolant temp corrections being applied...sometimes they are being made all the way up to 130-140 degrees. Keep it up!
You should do water injection into the exhaust so you dont cook the fuel cell. When you go Turbo, you could do liquid intercooled too since you have all that cold water around
@@erichenderson8425 Not as much as you would think, if it is steam you are referring too. 90% of freshwater boats have water cooled manifolds. It actually doesn’t steam much at all because the cool lake water is able to keep the exhaust at a very reasonable temp.
Congrats y'all, a lot of work went into this build and I'm so happy you had a successful test outing. This things going to be absolutely insane when you've got her how you want her Version 1.0...
imagine hearing vtech kicking in lol. prob cant because of how a boat works but just imagine :D. very awesome jet boat cant wait to see the project evolve
Man, this was so freaking cool. All I could think about was ol girl falling and getting her hair wrapped up in a pulley, but besides that this build has perfectly captured the vibes that I got watching my first boostedbois video when y’all flew to Florida with engine parts in suitcases and fully built the Integra
Need to add a water loop in there to let the engine get up to proper temp, and only pull in cool water when needed, as if pulling from a radiator. The super cool water constantly is not helping it at all and likley throwing some warmup stuff into the ECU calibrations.
Looks like a ton of fun.. congrats on getting it where it is... I might suggest putting the exhaust below the swim deck. Where it idles under water to muffle the sound..one other thing I would do Is instead of hand throttle do a pedal like James' drag boat mounted to the floor. But all around great job 👏 👍
Been waiting on this boat! Make sure to get a hard plastic skid like Cleetus and them have. I’m ready to see a 600hp jet boat and you blow past everyone else with a jet stream lol
Gotta get those trips in with Cleetus and crew sooner rather than later! Looks awesome and it's going to be stupid fast from the views of that test! Keep it up!
I leave my sand trap open all the time so it's continually dumping the sand and debris out the back of the boat. If you have enough flow so she doesn't over heat it will save you some time dumping your sand trap all the time if you run shallow sandy areas. Lookin good.
The biggest battle with jet boats is not over temp it’s getting them up to operation temperature. Normally a valve is plumbed in close to driver to controll water flow to engine so the proper temp can be reached. Depending on lake water temp and how your driving it will determine the adjustment.
You ever have that moment while watching a video where you realize "dam they have came a long way, I've been watching them for years" etc. Went from watching Kyle mess around in a Honda Civic to picking up speed boat exhaust in a porsche lol my dude made it 💪🏽
Man I’m so excited to see the K-BOAT (possible name maybe) ripping on the water, I was starting to think it wasn’t gonna hit the water this summer! I’m definitely looking forward to seeing you turbo and modify it, give it and Wyatt’s diesel truck their own mini series too, thanks for the awesome and ever changing content Kyle ~ the editing and overall quality of the videos is incredible these days as well!
Would be interesting to put a coolant/water pressure sensor on the engine and see when you the boat is at speed does the pressure of the coolant/water increase. edit: Just saw in the video you guys already thought of the pressure sensor
The faster the jet pump impeller spins the more engine water pressure the pump will make. They already did the best thing by over sizing the water outlet to relieve all the pressure
you can tell from the video towards the end the boat is trimmed too low. once they get that and the poly on I wouldn't be surprised if they pick up 10mph or more. My brother has a 18 foot I/O boat wtih a 5.3 truck motor in it. when he gets on plane there is about 12-18 inches of the hull in the water. significantly less drag that way.
I dunno why but i love this build. Lol. I would definitely do a knee high "firewall" between the seats and the engine and a pass through muffler. Looks like a blast to rip though.
Bro you gotta slap a tiny turbo on it. Quick spooly boi. With the fab work you guys are pulling off, you should easily be able to fit that and still get the seats over it.
All the right tools at ur disposal and he is cutting the unsafest way with a razor blade and no handle. I love it. That's as real as it gets for anybody. Lol. Screw walking 20ft for the right razor blade. U guys are so fricken awesome.
RUclips captions are on point - When Kyle jumps the starter @22:55 and the engine fires up the closed captions simply state "[Music]" while the engine purrs.
If you turbo it, you might want to invest into some boat trim tabs. They have automatic ones, but they will hopefully prevent the boat from flipping backwards which for a small boat and plenty of acceleration can. This will keep the boat on plane or try to at best because nothing is perfect. lol stay safe and have fun
I like the safety commitment with everyone in pfd cleetus dose so many boat videos without any life saving devices worn. That's honestly a basic legal boat safety requirement. I won't even take my kayak out on a calm lake without my pfd on for safety.
Авто/Мото
Kyle is my hero. Just sending the jet boat like 34% complete. Respect.
You must be new here. Kyle would send a 34% complete rocket into orbit with his ass duct taped to the nose cone.
I’m surprised they didn’t use a jump box to start it
They do have a history of half assing shit together. Glad to see them righting the project up before ripping
It’s called test and tune 😜
Boostedboiz style
After watching you guys for several years, i honestly expected to see the jetboat in your pool for the"floating test"🤣
I'm pretty sure, if it wasn't that heavy you guys would have done it! Keep it up boys!
Also, 44mp/h is around 38knots. Of course it's just a "small boat" but thats pretty fast actually.
@@swealer it'll be even faster when it gets turbo'd
It has been in the pool before. lol
@@rileymannion5301 sure! Can't way for it😅. Also the could do an water2air intercooler setup like they were doing the coolant for the enigne. Should work right? Its of course not the best way but they're the boostedboiz right?😀
@@swealer if it goes ~50mph at 5500rpm, once turbo'd and doing max RPM for the jet (think it was 8500RPM?) it should go ~80mph. assuming its linear.
Imagine how nice and cold an air to water intercooler will keep those charge temps! Endless supply of cold water and you already have a built in water pump.
Imagine how much better it would be with a V8 & v-drive. Weak 4cyl combined with a jet. Nerd ish.
@@ChrisTopher-ek6rr bruh
@@ChrisTopher-ek6rr sound like a boomer
@@dailying3049 are you implying that kids like lil tuner engines? Why would wanting to see an actual fast boat be a boomer thing? You could squeeze a v driven V8 in that easy & it would be a fuckin rocket ship lol. Not only is it sad to use a 4cyl, but also making it jet drive??? Do you know how inefficient jet drives are, or?....
@@ChrisTopher-ek6rr because that's not what he did and he's not going to. Its unique . No need to hate on it. There are plenty of v8 jet boats
Awesome too see how excited you both got while driving. Bet it feels great building something from scratch and seeing it perform so well. Great job Boosted Boiz.
The fact that you let Wyatt do the first drive shows how much you guys got each other's back! You two are amazing and what you guys do is hella motivational! Keep up the amazing work fellas! 👏
I thought this same thing. For him to let him drive first is sooo dope.
Or he didn't wanna risk himself
@@JoseFlores-kq6es yeah. and he was not on the jet boat too
When does V tech kick ? Great job peoples
It's not that serious. Do you always get overly emotional over random sh*t? I can't imagine what it was like after you watched brave heart. You probably dressed up as Mel Gibson and rescued feral cats.
It wouldn't be a Boosted Boiz test drive without something sketchy about it lol I loved the foldable chairs idea
Kyle burning his ass on a folding chair really tied everything together 😂
100000% twisted tea wrap this so it goes with Cleeters and James 🤣
Out of all the RUclipsr Jetboat builds, this one is my favorite. Good job guys!
I can’t wait to see this jet boat run with Cleetus !!!!
Dont think the dew boat will get fixed til after Leroy is done. But gives kyle more time to get this one buttoned up and tuned
"It didn't even sink." Thank you, Wyatt, lmao. So glad he's part of the team. Boat's lookin' great, boiz!
The rollers on the jetski are legit 1230 production crew level, nice work boiz
Kyle, after seeing the humble beginnings of the boostedboiz channel, you've made it quite far in such a short time. Congrats on all of your success. I cant wait to see what you decide to wrap this boat in... HONDA POWER jetboat wrap??? easy win
Something tells me this will end up with a twisted tea wrap to match a couple of his friends 😉
Short time? My dudes been grinding for a decade 😂
P
P
P
I personally think a supercharger would be better than a turbo in that thing considering you don’t need much boost and instant torque is what you want in a boat.
Dude, absolutely. Just check out ANY even tiny bit fast boat.... supercharged. Change the old saying a little..."Turbos are nice, but I'd rather be BLOWN.... especially in your more performance oriented marine application..." Now that's gotcher double entender, nerd-speak ending, AND logic one cannot ignore!!!
Absolutely a supercharger would be the way to go, but cost wise it’s gonna be a turbo. They probably already have everything they need sitting in a box somewhere lol. Either way I’m pumped for it.
NA power!
for it to fit under the engine cover they have with the seats in it. it has to be turbo the super charger would be to tall.
There is so much load on the engine in the water, boost will be instant with any reasonable sized turbo on a k series
Congratulations on the first test rip. I can't wait to see this thing completed and eventually with a turbo.
Boostedboiz NEON T-shirt wrap this bad boy!! My favorite T! High visibility for those wet shenanigans!!
Once you get that trim set up and tuned you’ll be close to 55 mph. I believe it will take a little load off the engine once trimmed out as well. Bout had a heart attack when I seen it without a turbski though. Gonna be silly with a turbo! Nice work!!
i don't know if 10 mph is going to happen with just tabbing the boat... i get 5 from mine ... especially considering there is more weight to be added in the boat (which all in the comments have not commented about in their guesstimates).... it will gain speed but also remember boyz that also adds rpm to the motor ... back to the extra weight ... seats, poly bottom, mounts for seats, sound bar (cause it has to have one lol ... and amps prob a 10 which i see room for).. then a suggestion, foam filler (for floatation and in case the thing does get a hole)... also didn't see bilge pump (boys that is a must) ... and cause FL sun is nightmare sometimes, a bimini top (which will slow it down but will feel like AC underneath it)... Boyz also don't forget to register and put a real engine kill system ... USCG mandatory item ... like that found on your jet skis cause a kill switch will still get you fined ...
@@xblackaquamanx8070 stay tuned then. He was pushing water so bad i don’t see a problem. Yep more weight…engine wasn’t even tuned. Get that front end out of the water and that’s gonna cut the drag in half. It really doesn’t matter. As long as they are having a good time.
@@xblackaquamanx8070 they still need to tune and add a turbo even if 50mph was max speed thats still plenty for a mini boat
@@toxicflicks1928 that hinda engine is around the equivalent of a honda 150 or 200
@@Wabeeninc with a tune, 200. They came factory with that much
This is one of the most anticipated builds in the mini jet groups. Glad to see it making some progress 🤘
The Simp group
This thing will be so narsty once they turbo it, get the trim adjustment operational and get some decent seats bolted into it
Awesome video that's how test drives should be on some nice chairs 🤘
Hahahahaha the lawn chairs and starts the boat with a wire on the battery 😂 boostedboiz vibes right there 😂👌🏼
consider rerouting the exhaust through the back of the transom just at the waterline that would help keep the noise down , like the bigger jet boat do they still sound very nice and you could have a conversation with out having to yell too loud
yeah that exhaust is temp, they still have the rear seats to get fitted.
No matter, they'll just do the old spinning muffler.
I agree 👍
They are going to have an turbo on it
I live the commitment to "I'll turbo it eventually, and just running a turbo manifold na"
I give him a week lol
So awesome!! Had to feel great out on the water in folding chairs too 😂
The world is a better place with one less pair of pit vipers 😂 the boat is rowdy!! Love it
These jet boats are such good content. Fun custom builds, super fun with relatively low horsepower, and people enjoying their days on the water. Love it!
I grew up jet boating with my old man. They're just like hot rods with all the different combos people put in them. And not having to worry about any kind of gear box or trans makes them really fun to just concentrate in the engine and the impeller sizing, that's it.
Make sure your vtec is set to turn on below the OEM temp, 135F i think, if you're going to continue to run it just warm all the time. That thing is dope.
I think they may need a thermostat to keep the engine at a constant good temp. to take away one unnecessary variable.
@@ericnelson6982 Oh I thought it had one in it, yea that'll do er.
@@ericnelson6982 if they are running it in the salt water the thermostat will rust away pretty quickly I’m sure there could be a better option that’ll last longer
It'll run hotter with the engine cover on there
It's on a fuel tech. I'll assume vtec just switches over at certain rpm, no minium temp.
I'd put a nice tiny turbo on it so it spools up faster and gets power earlier. I think it would drive a shitload better if it had more power off the bottom. Anyways that's just my $0.02 cents. Cheers boys!
Of course theyre gonna boost it!
27:53
add 2.4 kw baery hybred reduc full usea more rabe
100 % boating is about torque not hp
@@patmathew5757 Finally someone who gets it. 👍
Hell yeah! Wyatt was so stoked. He fits the Floridian salt life so well. I'm so happy for you boiz 🤙
It's great watching the Boiz work getting better and better. I've worked and played on and around boats my whole life ( I'm an old dude). the way you boiz handle yourself impressed me ( maybe the seats, but I've been there). Respect the water don't fear it and you will have a great time.
Word up
Maybe lower vtec to 4600 try and get some more power in before it hits that Celing
Lots of smiles per gallon with that thing. Nice job!
Also being a jet boat owner and enthusiast, I’ve been waiting for this day. Good job boys
K swapped jet boat!
46mph n/a with no nozzle adjustment? Sweet ride! Great test run guys! Can't wait to see more of this Beast!
This is my favorite build so far can't wait for final product
Nice work guys, job well done. Those little boats are really nicely designed. 46 m.p.h. is pretty decent considering you weren’t able to trim it up or anything. It’ll be great to see what a turbo will do for speed, maybe get 60 m.p.h. out of her would be pretty awesome. 👍👍🇨🇦
So cool that you guys had such a good test rip in the jet boat.
Keep up with the progress so you guys can enjoy this thing as much as possible for the rest of the summer.
Lmao at 30:02 that look that Kyle gives, "oh crap there goes my hat"
Great job 👍
Best thing about it...
Kyle can't miss 3rd on it 😜
Right the eff ON!!
Can't wait to see that thing rip with a turbo...
That boat will be SCARY fast...
Crazy how far this channel has came. OG sub since the fender roll vid
as a longmont native, its nice to see how far you guys have come. genuinely proud, boys.
🤟🏼
I'm a bongmont native also lol I feel the same way! Proud of you boiz...
@@boostedboiz Top shelf editing right there, son. You kept her booty out of that shot like a pro. lol That boat is gonna rip. Please be careful. You think a hydro-locked engine is bad news, wait till you hydro-lock your lungs. Be super safe on the water. Cars don't sink, boats do.
As a Tampa Bay native, who moved to Morrison CO for 14 years and then came back, welcome to your new home, boys!
Supercharge it. Turbo you have to worry about oil feed and drain lines. I simple supercharger will be great. Plus it's different from your usual turbo stuff
Yeah but a supercharger for a K24 isn't cheap, while a Turbo is very cheap.
@@Rx_Lee something like a jackson racing/eaton/magnuson unit sure, but a centrifugal that doesn't mount directly to the engine wouldn't have to be k24 specific, something like a rotrex c30-94 or a vortech v5, you'd just need a bracket and belt and then bring your own charge piping
Expensive af even on used superchargers...1/4the price to go turbo. I do get the pros of supercharging though.
They have the manifolds already so a dirt cheap ebay turbo on 10lbs makes way more sense to do.
@@ergopropterhoc and with a centrifugal s/c you have to worry about oil lines, reservoir, filters, coolers etc as well so may as well go turbo 🤣
Love it! If the coolant is running that cool, check to make sure you don't have any coolant temp corrections being applied...sometimes they are being made all the way up to 130-140 degrees. Keep it up!
Sounds like they should turbo it with a water-to-water intercooler setup, because they've got plenty of cold water to play with.
Congrats bros the boat is sick and I'm glad to see the complete project. Semi complete.
You should do water injection into the exhaust so you dont cook the fuel cell.
When you go Turbo, you could do liquid intercooled too since you have all that cold water around
It sounds awesome too!
Water with a hot exhaust is going to plume smoke 🤣
@@erichenderson8425 Not as much as you would think, if it is steam you are referring too. 90% of freshwater boats have water cooled manifolds. It actually doesn’t steam
much at all because the cool lake water is able to keep the exhaust at a very reasonable temp.
@@erichenderson8425 The water and exhaust don't mix until they exit. Boat exhaust manifolds have water jackets just like and engine block.
Truee
Glad you guys are testing in true Boostedboiz fashion.
Not TRUE Boostedboiz fashion…..it has a battery and not a jump pack
Looks like a solid build! Glad you guys got it happening. a lot of work to put these together!
Congrats y'all, a lot of work went into this build and I'm so happy you had a successful test outing.
This things going to be absolutely insane when you've got her how you want her Version 1.0...
imagine hearing vtech kicking in lol. prob cant because of how a boat works but just imagine :D. very awesome jet boat cant wait to see the project evolve
So what you're saying is single lobe it, so its always in VTech? Brilliant!!!!
It probably wouldn’t hurt to lower engagement to 3/4k, i dont even think it’s hitting vtec yet
@@bubbabrown6917 5,100 I believe is the normal cut in. if so, they are right on the edge.
@@dustyc324 that’s probably another 3/4 mph if not more
Hell yeah! I'm so proud of how far you guys have come. I freakin love this project! I can't wait to see if boosted!
What a machine ! Can’t wait for the finished product 🤟
Keep at it lads .
Man, this was so freaking cool. All I could think about was ol girl falling and getting her hair wrapped up in a pulley, but besides that this build has perfectly captured the vibes that I got watching my first boostedbois video when y’all flew to Florida with engine parts in suitcases and fully built the Integra
Needs the turbo asap
The k boat is a solid ripper awesome job fellas!!
Nice work guys. Good that you're staying safe.
This whole video sends vibes.
Y'all are loving life rn and it makes me happy to see that.
Need to add a water loop in there to let the engine get up to proper temp, and only pull in cool water when needed, as if pulling from a radiator. The super cool water constantly is not helping it at all and likley throwing some warmup stuff into the ECU calibrations.
you are 💯 correct. this needs a heat exchanger
More jetboat content 🤩 cant wait to see this thing spinning a GT30 , 400-500hp
byyvdear 300 suncers
Looks like a ton of fun.. congrats on getting it where it is... I might suggest putting the exhaust below the swim deck. Where it idles under water to muffle the sound..one other thing I would do Is instead of hand throttle do a pedal like James' drag boat mounted to the floor. But all around great job 👏 👍
Been waiting on this boat! Make sure to get a hard plastic skid like Cleetus and them have. I’m ready to see a 600hp jet boat and you blow past everyone else with a jet stream lol
buy picnic biart 2 375 hp disel jets 750 hp
Gotta get those trips in with Cleetus and crew sooner rather than later!
Looks awesome and it's going to be stupid fast from the views of that test!
Keep it up!
Those folding chairs had me rolling! Classic Boosted Boiz!
The lawn chair is a vibe
Those seats are top-notch! love it sending the jet boat when it is half completed! something my spare part ass would be doing too!
Amazing work as always, you and Wyatt are a hell of a team 👍💪🇺🇸🤙
I was expecting to see it in the swimming pool! 😅 Great guess on the top speed.
I leave my sand trap open all the time so it's continually dumping the sand and debris out the back of the boat. If you have enough flow so she doesn't over heat it will save you some time dumping your sand trap all the time if you run shallow sandy areas. Lookin good.
The biggest battle with jet boats is not over temp it’s getting them up to operation temperature. Normally a valve is plumbed in close to driver to controll water flow to engine so the proper temp can be reached. Depending on lake water temp and how your driving it will determine the adjustment.
Ese Motor K24 a Sido todo un éxito para HONDA 😮🤟🏻
dude this thing is gonna be so fast once it's boosted
“Gotta start a boat building service”
“I think I’m good”
😂😂
You ever have that moment while watching a video where you realize "dam they have came a long way, I've been watching them for years" etc. Went from watching Kyle mess around in a Honda Civic to picking up speed boat exhaust in a porsche lol my dude made it 💪🏽
We always run 2 bilge pumps in our jetboats here in NZ, for obvious reasons, it would be smart to put some in.
They already made clear they were...
niope
That thing is going to be superbad with a lil turbski. Be damn proud Boiz, them things aren't a small purchase much less to go BoostedBoiz style.💯👍
y’all should an under water exhaust. they sound freaking rowdy.
it also needs a turbo. we all want to see it 😂
Glad to see you including your GF on your vlogs.👍
Man I’m so excited to see the K-BOAT (possible name maybe) ripping on the water, I was starting to think it wasn’t gonna hit the water this summer! I’m definitely looking forward to seeing you turbo and modify it, give it and Wyatt’s diesel truck their own mini series too, thanks for the awesome and ever changing content Kyle ~ the editing and overall quality of the videos is incredible these days as well!
Kei-boat lol it's so little
Split header with dual exhaust pipes would be sick
And sound terrible
@@Vanadinit3 yeah not really, 9k rpm ripping it would sound pretty cool.
@@Vanadinit3 it sounded great the last start up video they had with two exhausts
It sounded so beastly on the TT exhaust.
Iv been on this channel for years since Charlie was around..I'm happy for Kyle with his come up he worked hard.
Very nice project guys ! Lots of work and grateful rewards !
Would be interesting to put a coolant/water pressure sensor on the engine and see when you the boat is at speed does the pressure of the coolant/water increase.
edit: Just saw in the video you guys already thought of the pressure sensor
The faster the jet pump impeller spins the more engine water pressure the pump will make. They already did the best thing by over sizing the water outlet to relieve all the pressure
you can tell from the video towards the end the boat is trimmed too low. once they get that and the poly on I wouldn't be surprised if they pick up 10mph or more. My brother has a 18 foot I/O boat wtih a 5.3 truck motor in it. when he gets on plane there is about 12-18 inches of the hull in the water. significantly less drag that way.
bíy whaler 18 range v 8 jet drive
Small cabinn crusers draft
Love the boat content so happy to see y’all so exited on the water
I dunno why but i love this build. Lol. I would definitely do a knee high "firewall" between the seats and the engine and a pass through muffler. Looks like a blast to rip though.
Looks good 👍 now all you need is a nice Size turbo and you’re ready for more power 😂
A boat this small I wouldn’t want much more power.
Bro you gotta slap a tiny turbo on it. Quick spooly boi. With the fab work you guys are pulling off, you should easily be able to fit that and still get the seats over it.
To bad there no room to put it between the two rear seats. So you could see the turbo inlet.
@@pyrocl0 Yeah that would be cool but also a hazard at the same time
All the right tools at ur disposal and he is cutting the unsafest way with a razor blade and no handle. I love it. That's as real as it gets for anybody. Lol. Screw walking 20ft for the right razor blade. U guys are so fricken awesome.
RUclips captions are on point - When Kyle jumps the starter @22:55 and the engine fires up the closed captions simply state "[Music]" while the engine purrs.
Yall have to race the boat against grind hard plumbing co.'s snowmobile jet boat theyre building
If you turbo it, you might want to invest into some boat trim tabs. They have automatic ones, but they will hopefully prevent the boat from flipping backwards which for a small boat and plenty of acceleration can. This will keep the boat on plane or try to at best because nothing is perfect. lol stay safe and have fun
Finally a project where Kyle doesn't have to worry about missing 3rd;) Stoked to see it up and running.
Awesome to see this going in the water! Worth the 8 month wait! Turbo this is going to be insane!
Been WAITING😂🤞🏽
Badass. Congrats guys. Man idk I think a supercharger on this thing would be badass. 🤷♂️ and different
You mean like all the other supercharged jet boats?!?
LSA is a common jet boat engine.
@@Zach-ju5vi I'm sure they're not at all common in jetstream boats.. 🤷
You guys make a great team, congrats on the boat! Now a merch drop for the new boat tshirt!!
Not Kyle drifting his jet boat with no seats 🤣❤️
I like the safety commitment with everyone in pfd cleetus dose so many boat videos without any life saving devices worn. That's honestly a basic legal boat safety requirement. I won't even take my kayak out on a calm lake without my pfd on for safety.
Of course you won’t
See if Cleet has some old SXSseats for that deal
I anticipate this boat becoming a priority project now that you’ve got a taste of it lol
I have no idea why I felt all the excitement you guys had...Awesome build awesome video..