I'm litterly at your heels with everything you have been replacing and cleaning, having same exact issues, thanks for your videos, they have really helped me, I did a wheel bearing and will be doing inner outer rods and lower ball joints, hopefully I do good
Haven't seen u recently, (and I hope all is well!!!!) but I needed this one today Big Time and I just want to say....Great Vid!! Detailed and Simple!! Thank You!!👍😎
I appreciate the comment Been busy all over Life has been interesting I’m good thanks for asking. This is some of what I’m been doing Make $700 in less than 2 hours with your car! ruclips.net/video/b_XksJHeCPg/видео.html
Love your videos. Have you ever considered upgrading your headlights to halo projectors? It took years off my nitro, now I break necks when peeps turn heads as I drive by!
It’s something to look into Thank you for the comment and watching Soon I gotta redo the front suspension. Then replace trans filter. And get 2 front tires with 4 new tpms. I also think the muffler needs replacing. Still got a lot of maintenance to catch up before doing mods. I really wanted do a stereo upgrade too.
Im having an issue with my nitro, no codes or anything. It stalls out and dies randomly at stoplight but starts right back up and drives well. It does this rarely. Any ideas of what the problem might be ?
Replaced a few parts like crank sensor, etc Then tipm Tipm replacement dodge nitro fix 4 demon possesed suv ruclips.net/video/kuTMOqvcRfU/видео.html Then just bought a Chevy Equinox that’s the real fix
If I don’t remove the tb could I just spray some tb cleaner on towel and try to clean it that way(engine off?) or could I spray some tb cleaner on the tb itself?
You should be able to clean it with a cloth Just be careful not to try to move the throttle plate by hand with the engine off it could damage or throw off the alignment of the throttle.
I think my issue is with fuel delivery I have a non start issue as well as a low, "hiccupy" idle. Thinking about replacing the fuel pump do you think that's a good idea? I also have the red lightning bolt but only before I start the car once it's running it disappears
Do a fuel pressure test before replacing pump. Red lighting bolt maybe issue with throttle body? Check the connector to make sure it’s plugged in good and tight
Autel MaxiAP AP200 Obd2 Scanner Bluetooth Auto OBDII Diagnostic Scan Tool for ios & Android, Full System Car Check Engine Light Code Reader with 25 Service Functions www.amazon.com/dp/B07QD4GZW4/ref=cm_sw_r_cp_api_i_V61S2GZT0YTT04E2W65H Reads everything even tpms sensors
Yes mine. Would rarely do it from time to time. Like maybe once a month for me. Let me explain what I did so far not sure which was or if is the fix. Although it hasn’t happened in a while. I first bought a second key from eBay that was uncut because I only had one key and wanted a spare. Then I went to the locksmith and had them cut the key for like $3. They did Not program the key. Then I replaced the ignition switch. Then replaced the ignition cylinder. I still want to replace the ignition actuator. Then what I did off camera was take the old keyfob and the new keyfob apart. I swapped the circuit board from the old key and placed it inside the new cut key. Then installed a new battery. Then I put the new circuit board in the old keyfob. The. Old circuit board works good so far in the new cut key. And I like having the spare it runs the suv for 5 secs then cuts off. I like using it after servicing important things like the trans filter if gives me a chance to kinda break in the new parts. Not saying it’s correct it’s just what I’ve been doing.
Funny enough well not really it just did that weird cranking thing again. Just one time and hasnt done it since. I'm going order a rebuilt tipm where it has the relays already replaced. I'm thinking thats the issue. I found a good company that will rent the tipm for a few days to test out the issue. I'll know pretty quick if I erase all the bcm codes and if the engine runs better. Im attributing that rough idle to a bad tipm or cloggged muffler??
Mine does that once in a while, got used to it, noticed when I press the key into ignition, it turns on with no issues, it may be the key it self, I first thought it was starter but starter is fine
Hello, Is it okay to open factory installed throttle body for cleaning ; my Jeep Liberty KK 2010 is getting ETC Light so is that because of bad throttle body??? Shall I replace with new or clean the old one and check? Inputs will be much appreciated! Thank you
After performing a computer check , it showed up with a fault code P0430 Catalyst System Efficiency Below Threshold Bank 2 Maybe the issue is the catalytic converter and not the throttle body. Confused 🤔
If my nitro is still havi g a rough idle and etc..should I just get my throttle body reprogrammed? I also heard it's ok to manually push open the butterfly valve on a electronic throttle body.but only after it's not energized.
Do you have any check engine light on? I would only reprogram throttle if you replaced it or had the red lighting bolt warning light show on the dash to see if that would fix it before replacing the throttle body. I’m not a mechanic but there are plenty of things that could cause a rough idle. Like a coil pack that needs replacement and a good mechanic that could look at the live data could find the issue. 1st run diagnostic from obd2 scanner 2nd. Look at live data if no codes are present (Mine still has an intermittent rough idle. I’m thinking of replacing tipm then coil packs)
I'm litterly at your heels with everything you have been replacing and cleaning, having same exact issues, thanks for your videos, they have really helped me, I did a wheel bearing and will be doing inner outer rods and lower ball joints, hopefully I do good
Yeah I’m about to buy a Chevy 😆
I Prolly should have bought a bette maintained nitro
Haven't seen u recently, (and I hope all is well!!!!) but I needed this one today Big Time and I just want to say....Great Vid!! Detailed and Simple!! Thank You!!👍😎
I appreciate the comment
Been busy all over
Life has been interesting
I’m good thanks for asking.
This is some of what I’m been doing
Make $700 in less than 2 hours with your car!
ruclips.net/video/b_XksJHeCPg/видео.html
Love your videos. Have you ever considered upgrading your headlights to halo projectors? It took years off my nitro, now I break necks when peeps turn heads as I drive by!
It’s something to look into
Thank you for the comment and watching
Soon I gotta redo the front suspension. Then replace trans filter. And get 2 front tires with 4 new tpms. I also think the muffler needs replacing. Still got a lot of maintenance to catch up before doing mods. I really wanted do a stereo upgrade too.
Im having an issue with my nitro, no codes or anything. It stalls out and dies randomly at stoplight but starts right back up and drives well. It does this rarely. Any ideas of what the problem might be ?
Im having the same problem with the idle. What did you do to fix it ? What was the main cause ?
Replaced a few parts like crank sensor, etc
Then tipm
Tipm replacement dodge nitro fix 4 demon possesed suv
ruclips.net/video/kuTMOqvcRfU/видео.html
Then just bought a Chevy Equinox that’s the real fix
If I don’t remove the tb could I just spray some tb cleaner on towel and try to clean it that way(engine off?) or could I spray some tb cleaner on the tb itself?
You should be able to clean it with a cloth
Just be careful not to try to move the throttle plate by hand with the engine off it could damage or throw off the alignment of the throttle.
I think my issue is with fuel delivery I have a non start issue as well as a low, "hiccupy" idle. Thinking about replacing the fuel pump do you think that's a good idea? I also have the red lightning bolt but only before I start the car once it's running it disappears
Do a fuel pressure test before replacing pump.
Red lighting bolt maybe issue with throttle body? Check the connector to make sure it’s plugged in good and tight
good job buddy nice video thanks
Thanks for watching still working on my low idle issue. Just taking things one step at a time to figure it out.
My 07 makes like humming noise?
Is it the throttle?
Try a mechanics stethoscope
Use it to pinpoint the noise.
Click to purchase amzn.to/3Ndbn69
Sounds coming from there any idea what could be? Also white smoke coming put from exhaust?
Thanks so much .
Your welcome
Mine has the same issue sitting at work. I just wanna take a sledgehammer to that piece of crap, Dodge really crapped out a big turd with that one.
What issue are u having?
Mine was bought from the auction so I didn’t know the history of the suv plus it was from up north
What is the OBD2 scanner you have, I'm trying to get one that works with Nitro
Autel MaxiAP AP200 Obd2 Scanner Bluetooth Auto OBDII Diagnostic Scan Tool for ios & Android, Full System Car Check Engine Light Code Reader with 25 Service Functions www.amazon.com/dp/B07QD4GZW4/ref=cm_sw_r_cp_api_i_V61S2GZT0YTT04E2W65H
Reads everything even tpms sensors
I have a 2008 as well and some days when I go to crank it it keeps cranking. Does your 08 do the same as well?
Yes mine. Would rarely do it from time to time. Like maybe once a month for me. Let me explain what I did so far not sure which was or if is the fix. Although it hasn’t happened in a while. I first bought a second key from eBay that was uncut because I only had one key and wanted a spare. Then I went to the locksmith and had them cut the key for like $3. They did Not program the key. Then I replaced the ignition switch. Then replaced the ignition cylinder. I still want to replace the ignition actuator. Then what I did off camera was take the old keyfob and the new keyfob apart. I swapped the circuit board from the old key and placed it inside the new cut key. Then installed a new battery. Then I put the new circuit board in the old keyfob. The. Old circuit board works good so far in the new cut key. And I like having the spare it runs the suv for 5 secs then cuts off. I like using it after servicing important things like the trans filter if gives me a chance to kinda break in the new parts. Not saying it’s correct it’s just what I’ve been doing.
Funny enough well not really it just did that weird cranking thing again. Just one time and hasnt done it since. I'm going order a rebuilt tipm where it has the relays already replaced. I'm thinking thats the issue. I found a good company that will rent the tipm for a few days to test out the issue. I'll know pretty quick if I erase all the bcm codes and if the engine runs better. Im attributing that rough idle to a bad tipm or cloggged muffler??
I have the same with the same vehicle
Mine does that once in a while, got used to it, noticed when I press the key into ignition, it turns on with no issues, it may be the key it self, I first thought it was starter but starter is fine
Try this first
How to clean corrosion off battery terminals. Fix for starting issue 2008 Dodge Nitro
ruclips.net/video/H3VVo0dbToQ/видео.html
Hello,
Is it okay to open factory installed throttle body for cleaning ; my Jeep Liberty KK 2010 is getting ETC Light so is that because of bad throttle body???
Shall I replace with new or clean the old one and check?
Inputs will be much appreciated!
Thank you
May need to replace throttle body and calibrate.
@@aricwithautoreplay Okay I'll do that , Thanks 🙏
After performing a computer check , it showed up with a fault code P0430 Catalyst System Efficiency Below Threshold Bank 2
Maybe the issue is the catalytic converter and not the throttle body.
Confused 🤔
Do u know where is fuel filter located ?
According to nitroforumz.com
“It's built into the fuel pump, inside the gas tank.”
@@aricwithautoreplay Great idea Dodge ! Don't put it in the fuel line with a screen in front of it! Oh no! That would be to easy!
If my nitro is still havi g a rough idle and etc..should I just get my throttle body reprogrammed? I also heard it's ok to manually push open the butterfly valve on a electronic throttle body.but only after it's not energized.
Do you have any check engine light on? I would only reprogram throttle if you replaced it or had the red lighting bolt warning light show on the dash to see if that would fix it before replacing the throttle body. I’m not a mechanic but there are plenty of things that could cause a rough idle. Like a coil pack that needs replacement and a good mechanic that could look at the live data could find the issue.
1st run diagnostic from obd2 scanner
2nd. Look at live data if no codes are present
(Mine still has an intermittent rough idle. I’m thinking of replacing tipm then coil packs)
How did it idel afterwards
Ok
It idled better after I replaced the tipm
Brother be looking like tiger wood's lil brother
Thanks for the comment. Just need to work on the money that he has
Literally a video of how to fail at removing a sensor. 😂
Thanks for watching