Learn The Best Way To Clean Your Throttle Body-Why Pay Hundreds When You Can Do It For Free
HTML-код
- Опубликовано: 24 май 2016
- I show you how to remove and clean your electronic and cable throttle body. I cleaned my car throttle body and boy did it make a difference. My car had a rough idle and was hesitating bad. The hesitation has stopped and now my car is running very smoothly again. I feel like I gained more horsepower. I had an OBD2 code p0300 random misfire that went away after the cleaning.
Create Your own stories raw.film/?ref=charlesbooker
Treat Oxman to a bottle of water paypal.me/oxmanagain?locale.x...
Autel Code Reader Diaglink ( amzn.to/2xtX9r9
CRC throttle body cleaner amzn.to/2hAsT3i
In the video, I show how to clean an electronic throttle body on my Cadillac STS and Cadillac Escalade. I use throttle body and air-intake cleaner from CRC to cut through the built-up carbon on both.
For best results take your car throttle off the intake manifold and disconnect from the wire harness. Then spray CRC throttle body cleaner on the throttle in a well-ventilated area while wiping with a clean towel. Repeat until you have a clean shine.
If your car is shifting funny you might want to change the TPS ( Throttle position sensor) and if your car is idling high or low you might want to change the IAC (Idle air control valve)
In this video, I'm going to show you the best way to clean your throttle body. Throttle bodies are dirtiest near the throttle tip, and this is where the air fuel mixture passes through. By cleaning your throttle body, you'll achieve a smooth idle and reduce gas and emissions.
This is a simple but effective way to clean your throttle body, and it will save you a lot of money in the long run. So don't wait, learn the best way to clean your throttle body today!
In this video, we're going to teach you the best way to clean your throttle body. Throttle body problems are common and can often be solved for free with a little know-how.
If your throttle body is giving you trouble, then this video is for you! We're going to teach you the best way to clean your throttle body and solve the problem for free. By the end of this video, you'll know how to clean your throttle body and keep your engine running smooth and idle!
In this video, we're going to show you a quick and easy way to clean your throttle body. Throttle body cleaning is a common maintenance task that can help improve your car's idle quality and performance.
Don't spend hundreds of dollars on throttle body cleaning services when you can do it yourself for free! In this video, we'll teach you how to clean your throttle body in just a few minutes using simple and easy steps. So watch and learn, and start enjoying improved idle quality and performance in your car today!
#cleaningathrottle #throttlebody #morempgs
Music by:
West Coast Trip by Gunnar Olsen
Volcano Trap
Show your Love by Otis McDonald
Park Bench by Gunnar Olsen
Not for nothing by Otis McDonald
Move out by MK2 
Хобби
Heres a link to throttle body and injector cleaners so it will save you from buying a new throttle body. amzn.to/2u2drou
There is this guy on RUclips cleaning the throttle body with the car running and spray directly into the throttle body there is a little hole just before the throttle body opening so he could stick that red tip in it and just spray while the car is running and spray through the intake and he says it cleans the valves
Thank you
L320 rrs o2 sensor replacement vids?
Will cleaning wipe away the check engine light? Thanks for the help!
@@mattsalazar9402 it all depends on what code popped up on your dash. This has turned off my light before and poured in injection cleaners has turned it off before. Just depends on what is causing your check engine light. But this is pretty much free and easy. Thanks for watching.
'06 rrs. Opened back end and saw hardened carbon ring around the inside of the tube where the plate sits. After cleaning, no more idle fluctuations. Your instructions are wonderful. Thanks.
100% better than other videos that I have seen on cleaning throttle bodies ... Great job ... 👏👍
Thanks, had check engine and red lightning light on in my 2014 dodge avenger. Couldn't get above 2k rpm and was worried, few bucks and 30mins of my time and it's working right again! Beats paying $500+ at a repair shop!
I like the way you do these , thorough and complete , nice work
My jaguar was running and idling really bad. Cleaning the throttle body fixed the problem. Thank you.
Akram Rabah you're welcome and thanks for watching.
I watched a couple videos how to do this, then cleaned mine yesterday. today your video popped up and I gave it a look. I wish I saw your video before I cleaned mine. no one ever mentions the intake manifold. great video from someone who just cleaned their throttle body.
Paul Kolazinski just make sure that you change your pcv to prevent blow by and keep air filter in great shape, use lots of good fuel injector cleaner to prevent clogged injector wich will fualt out your plugs creating smog/carbon build up again!!!
Great video. I have to completely clean my throttle body on a 1995 Lincoln Town Car that has 175,000 miles. This is exactly the help I needed. Thanks!
Thanks for watching.
Helpful video. Good explanation, visuals, lighting, etc (background music messing with my hearing and listening to you though). Very well done and helpful. Thanks.
Excellent video and instruction. Thanks bro. Did this before putting on a CAI!
This is the video that really helped me learn about cleaning throttle body. Thanks !!
You gave me EXACTLY WHAT I NEEDED TO KNOW??? YOU ARE WONDERFUL!! THANK YOU!!!!
Great video! I tried cleaning the throtle body yesterday and gave up because I opened up the wrong side ( air filter housing side) it didn't look like a throtle body was in there plus it was getting dark outside. Before taking my car to the dealership I came across your video and now I'm more confident about doing the job myself. You saved me hundreds!!! Thank you!!
You're welcome thanks for watching and I'm very impressed that you tackle this yourself.
Thanks for the video. I own an 06 sts with the northstar engine and I appreciate all the vids pertaining to your cadillac. Very helpful.
hey no problem and thanks for watching by the way nice car haha
Gillion Downer northstar sucks balls yo
Any head gaskets blown yet with that Northstar?
Thanks for the tips. Watched the video, cleaned the tb and now there's no more hesitation. Smooth as silk.
I'm glad I could help and give yourself a pat on the back because you just saved about a $100. Thanks for watching.
The music wasn't too bad, but a little distracting. Plus there were birds, which I liked.
Mann 🤣🤣🤣
Good thing you removed the TB off the second vehicle. Worth the effort. Thanks for posting this video!
So glad I saw this before spending $200 on a new part! Thank you!
great video, you explain it very well. With all due respect I would like to add: be sure to cover the intake hole after you remove the throttle body, if you drop anything down into the engine, ie screw driver, nut, bolt, etc. you will have to get a knew engine or take your engine totally apart to retrieve said item. Again, great video, well done.
I like your statement & your DIY attitude. Glowing Cleaning!!! Happy New Year.
I have a 91 Chrysler LeBaron with a 3.0L Mitsubishi engine. The Idle air control module is bad, so I ordered a replacement. The car is in good shape but has a lot of miles on it so I decided to do the whole job and clean everything. Your video is aces! Since my throttle body is mechanical, I'll remove it like you did to clean it. I suspect when I'm finished the car will idle and accelerate a whole lot better. Thank you for your help. It is most appreciated. Stay well in this terrible virus situation.
Thanks for the video. My suv has an electronic throttle body and I didn’t realize there was a difference. Also I’m glad you’re wearing gloves and a mask. You don’t want to breath the fumes and the cleaner can be absorbed through the skin. I worked in a shop for many years and a lot of techs just don’t want to take the time. Thanks again!
Thanks for your comment and thanks for watching.
agreed, though in all fairness, a surgical mask does nothing for aerosol/fumes and vapours (or viruses for that matter). You would need to wear a respirator to block such fumes. It does help with larger particles , dust , etc. Great video!
I know I'm 6 years too late,but what a great video,you are very good at explaining things,top work man 👍👍.
Great video! I like preventing! Rather then masking!! Air filter, plugs!!! And lots of fuel injector cleaner to prevent clogged injector! Those three if bad equal carbon build all over! I use Lucas fuel injector cleaner and laquar thinner to keep things clean!
Great vidio,no B.S.,just the straight dope! Thank you for your effort.
Great job explaining this! Thanks!
Thanks for the video. You’re a great instructor.
Great details. Very nice. Now to figure out the throttle relearn process without a bi directional code reader. Thanks again!
Excellent info man! Thanks. I picked up a can of cleaner at noon today. Will use it this weekend.
Thank you for watching and let me know how it goes.
Very good video...I watched a few others that really didn't show or tell what you did...Thanks 👍👍
Thanks for the illustration, great job.
Great video... I'm getting a can of CRC and cleaning my 3 vehicles throttle bodies... thank you for the awesome video.
Thank you a million for your tuition it helped a lot I've been through different mechanic all 4 of them didn't quite exactly solve the problem in my Audie each one of em they made me buy unnecessary car parts for no reason whatsoever but since I've tried your methods there's a huge change on my car✅👍
thanks dear very nice video despite the music greetings from your followers in Kuwait
Great job and details on the cleaning of the throttle body. I gotta clean or replace mine on an 2005 Chevrolet Uplander, never have messed with these electronic engines much but thanks to you and the video i think i can handle this job.
You're welcome and thanks for watching.
You ARE the man.....Great video, great explanation, great hi-res pics. I will do this and MAF cleaning on my 2004 Ford F-150, 4-1L to try to get rid of my check engine light so I can pass inspection. Thanks again. Be well.
Thanks and I appreciate your comment. Have a good day.
Man you saved me from taking this car to the dealer my c5, I did exactly what you said do and it worked,you saved me time and MONEY (Thank you)
I'm glad to help out a fellow Cadillac owner. Thanks for letting me know.
Got a check engine light? Want to learn how to check it out yourself? Watch this to learn how to use a scan tool!
www.youtube.com/watch?v=pN4Kn...
Really well made video, you explained everything well and you could see everything you were doing. That must have took some time to put together. Very much appreciated! Great job! Thank you!
Great video. Thanks for the tips. I'm going to try this on my truck today!
Thanks for watching and let me know the results.
I'm researching how to clean my throttle body right. I appreciate the detail you went into. I'll try not to go crazy with the cleaner and thanks to you I'll make sure I clean the edge, which I haven't heard explicitly on other videos. I am thinking maybe I should take it off after watching the second throttle body cleaning. I'll need to do a bit more research about my exact vehicle to see what all might be involved with that.
Very easy to understand video! Thank you for sharing this info!
I'm doing this to my car on the weekend and this video was a great help 👍👍
Let me know the outcome. Thanks for watching. You have a nice day.
Very good video young man Thank You Joe
This has ton of info, thanks for making a detailed video to such an extent
You're welcome, and I appreciate you for watching.
Great video,so easy to understand!! 👍 ...and I was so busy listening to you I didnt even notice any music!! I'm amazed some complained!
Thank you.
Great demonstration and explanation..
Awesome video. Great information. Thank you for sharing.
Thanks for sharing. I have the lighting bolt on my 2017 Jeep Patriot. I hate that there are so many place around Chattanooga, TN that rips off women when we take our car in to get fix. I am depress cause there is no tell what kind of quote I will get to fix my problem . After watching this video, it seems rather simple. I just do not have the confident to do it myself. Wish I was married to a mechanic.
Great video! I liked that you show both styles! Thanks for sharing, subbed.
Thanks for the tips and examples bro!
You doing very good job 👍👍👍👍
Very nice video 👌👌👌👌👌
Very good teaching very good Teacher
Thank you so much for Teaching
Man, You are my hero! Many MANY thanks for your advice.... You just save my day! Hello from Montreal Canada! Have a nice one Brother!
tomitomtom You're welcome and I'm glad the video helped you and your dad out. Thanks for watching.
Good video man! Very thorough!
When I'm already enjoying the video and than at 7:17 I see the ole "Vortec" and like it that much more because the vehicle I'm researching this for is a '95 Chevy Pickup! 😎 Great Video! 👍🤟
one of the best videos I seen thanks! I have a cadillac 2004 cts and my car for some reason didn't acellarate at all my throttle cost 220$ I clean the outside and it works but I will clean the inside to get better performance
Thanks for watching, I appreciate the nice comment. I'm glad the video helped. Thanks again
Good thing I learned to do maintenance on my first car besides oil and filters. While changing my oil sometimes I'll check the throttle body while it drains and do a quick cleaning if needed with shop towels from autozone and the cleaner is awesome, some shop while they did my AC i asked them how much and service was like $120 lmao, I saved more money doing work myself that I can do thank god.
Thanks for posting.
Real Nice job! Thank you for sharing
Thank You Kind Sir for making this video. Very helpful, I have a v70 2001 volvo wagon
You're welcome and thanks for watching.
We got a Ford Figo 2011,and the light comes on at times,so I'll be following your instructions and will give feedback..
Great videos 👍🏻
Great detail really informative!!!!
Good job man, I'm gonna do mine today. Thanks
Todd Barlow You're welcome, thanks for watching.
Great video/instruction.
That (Lip) up in there is a Butterfly to us oldschool machines a Blade to the new school computer button pushes. Good video and the removal cleaning will work wonders CRC throttle body and Mass Air Flow sensor cleaner is my choice.
Great video. Thanks
I would like to expand on what you said about "you can snap your finger" if you leave the throttle body pugged into the vehicle, it could energize in "ice break mode" if it does this it will close driven by the reduction gears and it could cut your finger severely. Your video is spot on, I just want others to know the danger for leaving it in circuit. Thanks!
I thank you for adding your comment.
Good Job Brother!!! I did it to a 91 Sentra w a GA16DE AND WOWEEEE 180,000 miles...it ran like NEW!!! But the guy I got it from had put the cheapest A-zone wires on it...I am still amazed it ran good enough to pass smugg...after I got the correct 7mm Wires on it...ohhhh man...night n day...now it runs...heehee... awsome...
Great Video keep up the good work. The only thing I would have done different is pull that red rubber seal out before spraying the cleaner just in case.
excellent work
Useful clip. Thank you
Great video! Keep it going.
Thaks bro, thats help me in my LR3. Blessings
Thank you. Great video
thanks for the tips....im going to try this on my ford ranger....thanks again...this is well worth watching....
I appreciate your time and enjoy working on your truck, it's very rewarding to do stuff on your own.
Roy Dineen...Yes I did it for my Ranger and it solved all crazy idling problems I was having...👍
great video. Thumbs up for sure. Thanks for posting.
Well presented thanks.
Nice vid amigo. Thx for sharing.
Great Video !
Fixed my hard starting issue thanks
Thanks for the video great job!!
Great video. Thanks for posting!
You're welcome, thanks for watching.
Very good video. Thank you.
Great video! THANK YOU VERY MUCH.
great video, my man!
Excellent video.
Thank you for taking me back too school
Great video
Thank You! Great & thorough video!
Thank you.
Nice video, thank you for the knowledge!
You're welcome and thanks for watching, I appreciate your comment.
On my Dodge Journey you have to recalibrate the TB using a scan tool.
Excellent video,👍👍👍🇨🇦
great job thanks
Thanks, will help for sure.
I'm glad the video help you and thanks for watching.
Thank you so much. Yesterday Firestone told me it will cost $511.21 to replace mine!
I'm glad I was able to save you a little bit of money.
Just a tip, using ACF-50 on your electrical sensors, does wonders for protection. They only use that product on airline jets, most likely the military also.
Great post, Oxmanagain.
Thank you.
Thanks, nice video!
Great video thx
Thanks for the video is very helpful!
Thanks for your comment.
Damn good job and easy procedural video.
Thanks
I appreciate you watching.