How to Service a Magnaclean Pro 2 & Keep Your Central Heating System Clean - a DIY Guide
HTML-код
- Опубликовано: 12 июн 2020
- In today's video I will be servicing my Magnaclean filter and explaining what other steps you need to take to keep your central heating system clean.
You can buy me a coffee here www.buymeacoffee.com/charlied... or become a monthly member to unlock Discord forum membership, exclusive content and automatic entry into my FREE Monthly Giveaway. Thank you SO SO much!!
🛠Charlie DIYte Amazon Tool Store www.amazon.co.uk/shop/charlie... - all my tried, tested and much loved DIY tools are now in one place on-line.
Today's Toolkit UK
- Magnaclean Professional 2 Chemical pack geni.us/dIW1 (Amazon)
- The original Magnaclean which doesn't have the quick release trigger or internal sheath geni.us/iQ9Vtqm (Amazon)
Magnaclean Professional 2 - Installation and Servicing Manual bit.ly/37rbftx
Plumberparts Magnacleanse Video bit.ly/37rXLhf
* The Amazon links above are affiliate links. It doesn't cost you anything to click on them but I do earn a small commission if you do.
And here's the legal bit I have to state: As an Amazon Associate I earn from qualifying purchases.
SUBSCRIBE - you can subscribe to my Channel here:
/ charliediyte
LET'S CONNECT!
Charlie DIYte
-- Email: charliediyte@gmail.com
-- / charliediyte
-- charliediyte.co.uk/
-- / charliediyte
-- / charliediyte
#magnaclean #adey #filter 
Хобби
This is easily one of the best Magnaclean service videos on RUclips Charlie! shown & explained in a clear concise manner you even showed how to service the lid seal properly & silicon grease which is NOT clearly shown on some other videos on RUclipsBy so-called ‘professionals’. Well done top marks!
New sub very recently (noob wanting to make a wardrobe case and garage storage) and as a result bought my circular saw today. A YT tip which I'm sure you know anyway but as well as encouraging comments, you could also add a poll within the video to gauge people's interest in "would you like to see a video on this" or whatever which they can action there and then as they watch it. it not only helps you with content and feedback but also, the YT algorithm sees it as additional "engagement" so bonus points in terms of becoming more recommended. And a thumb down to the algorithm is exactly the same as the thumb up they hold the same value. As a viewer to videos I'll always do a poll as it makes me feel like the person I'm watching cares about what I think. Thanks again, I'm so glad I found this channel, I'm off to continue ploughing through your backlog and remind myself what I need to screw stuff into bricks.
Good to hear from you mate, and thanks so much for subscribing 👍 To be totally honest I hadn't really appreciated that you could run poll cards in videos, but it looks like they were discontinued after 10 June 2020 as apparently it was a feature people didn't use very often (probably because, like me, most creators didn't know about them!) As you plough through my backlog, please accept my apologies for the cheesy music that blighted all my early videos. All part of the learning curve, but the music was a big error! If you need any advice, or in fact, if there are any videos you think you'd find useful, drop me a line at charliediyte@gmail.com, as I get so many comments, yours can quickly get buried. Thanks again for the comment.
@@CharlieDIYte hey.....I like 'terrible music' so my parents used to tell me! That's such a lovely response thank you. And now I've learned polls are not happening anymore. I liked them! I'll be sticking around for sure!
Thanks, didn't even know I had one of these, cleaned it out for the first time in the 5 years I've lived here and had less sludge than your 6 months. Also really useful as I had just changed a radiator and was trying to work out the best way to add inhibitor!
Yey - great work! Reminds me I've got to add inhibitor to my system after a few drain downs.
Thanks for the love Charlie! ❤️
You're very welcome mate - love your vids! 👊
@@CharlieDIYte Yeah man yours are wicked too! Should get together for a 'collab' thingy...beer perhaps? Let me know and we'll DM or something.
@@plumberparts Definitely. Happy to drop by plumberparts HQ or your local pub if it's open by then! I'll drop you a line. If you see this comment, you can also ping me an email at charliediyte@gmail.com, to get things started.
@@CharlieDIYte This needs to happen.
Get a room
Very informative video! We had one of these installed last week.
An enjoyable clear tutorial. Very interesting to me as I am about to service my magnaclean, which I suspect hasn't been cleaned since it was fitted with the new boiler 7 years ago.
Thanks buddy. Appreciate the comment and glad you found it useful. 👊
Your videos are always helpful, informative, and pitched at just the right level. Thanks.
incredibly useful - thanks
You're welcome. Thanks for the comment. 👍
Yes! Love this. Absolutely do the plumbing video, love your videos. Hope you are safe and well at this time.
Thanks David. I'll add it to the list 😉
I've had one of these but the earlier version that used plastic threads on metal compression fittings. Consequently it was a pain to seal and after a few years became a pain to service as the seals kept breaking from the force of removing the service cap until I was left with no thread on the plastic body of the unit to attach to the metal fittings boiler side. So I just bypassed it. It took some metal filings out when I was able to use it the first few years, but not an enormous amount.
Cheers, Ian, Birmingham
First rate presentation; excellent content and very well delivered. Thanks
Great video! I’ve seen a few other comments saying the same, we already had one on our system but I had no idea it was serviceable. I’ll tackle this tomorrow now and give it a dose of inhibitor too. Fabulous content, and really invaluable to people like me.
Charlie run the install video please.
Ok, I'll add it to the list 😉
Nice to see you again!
I got interested in trying one of this filters. I have just a mesh filter in the circuit that only catch midsize particles. ( but is veryyyy cheap 😂)
There is also another type of filter that is filled with safe chemicals which reduces the dissolved calcium salts. I have been using this type for about 3 years. Calcium salts dissolved in water(generally but not scientifically referred to as TDS) create most problems in small boilers. These boilers have thin heat converter pipes inside and when the water is heated, solid calcium salt builds up and clogges the pipes.
Thanks Charlie , I found that very very useful . 👍🏽👍🏽
All the videos from Charlie now watched these past 2-3 weeks while I've been ripping out and patching up dado rails with easyfill 60...this particular video gave me confidence to have a peek at my worcester bosch magnet filter myself. It was serviced in December and was apparently very clean. Wasn't a lie, it was clean as a whistle now in June, the water inside was crystal clear, apparently a sign of a good quality power flush. I can cross one worry off my list.
How strange! I was thinking to myself this week - I must clean the filter on the boiler and now you’ve posted a video on it. Cheers!!
Thanks, Dan. Perfect time to do it as well!
I would find the added video useful as I enjoy all the hard work you put in to making these videos. Also the the fact that I learn a lot from them adds to it all as well. So please keep up the hard work and please add the installation video. Cheers mate.
Thanks Daniel. I really appreciate that - and your recognition that it's hard work putting them together 👍 I'll add it to the list.
great video Charlie and just the prompt I needed. I had been putting off doing this task as I couldn't quite remember the process described by the plumber. Wish I could upload the pic of the black gunk, now removed. Many thanks for another truly useful & informative web video. :)
Thanks, Paul. Satisfying, isn't it!
ive cleaned my magnaclean for last for last 3 years then added inhibertor this year the magnaclean was spotless infect i checked to see if it was still magnectic ! well worth having
Great to see a new video.. Please keep them coming 👍 👍 👍
Very informative, great video thanks👍
what a Good filter, I Will be Filtering 1 or 2
brilliant video. Where do you drain their magnetised water?
Great video. I'm in the market for one of these. I'd also like to see your installation video. Thanks for posting.
Thanks CG. Yes, and it's the perfect time of year to be installing it. I'll add the install video to the list. Suffice to say if you know how to drain down your system that's the only tricky bit (unless yours already has isolation valves). You just need a pipe cutter and some spanners and away you go.
God bless! Perfect video Charlie I've just cleaned my filter after watching your video! We bought our place 4 years ago and it was always there just under our boiler! I knew it was a filter of some sort but I've never thought you have to clean it ! Anyhow now all done to my surprise it was quite clean ! Again thanks for the informative video!
So glad to hear you find out useful. That's great news. Means you've got a squeeky clean system. I always think it speaks fathoms about your predecessors that they had a Magnaclean installed. Shows they cared about this sort of stuff and were on top of maintenance.
Would love to see how you installed that filter , Charlie great videos as of Always great work mate keep it up👍👍
Thanks Ryan! Yes, I'll definitely run the video. Thanks for getting in touch.
Very interesting video. Also it would be great if you could do the extra video you mentioned! Great content!
Thanks 👍
Nicely done good video, good job Charlie
Thanks 👊
Thanks Charlie. Please can you show the video of the magna clean install. Great vid
Yes, I think I'll run this, but it won't be straight away as I've got one or two things in the pipeline.
Thanks for sharing, great information.
You're welcome 👍🏻
Thanks a lot for the great video. We have installed it 4 months ago and when we open the filter, it's quite clean. Is that normal?
Amazing information 😍
Thanks 👍
Good informative piece. Since we have been in this house for 2 years, I guess that my filter will be in dire need of a service. I was actually brought here looking for info on magnetic feedwater conditioners. I am sorry to say, that I did not know the function of this component in my system.
Thanks Alan. Glad you found it useful when though it wasn't what you were looking for! It might not be too clogged up - depends how well the system has been flushed and inhibited in the past.
@@CharlieDIYte It was not too clogged, there was a small black oxide build up. Good inhibitor dosing by the look of it. The whole device was stained with red rust though. The only problem was that the chamber would not release from the inline piece. That did not hamper the clean, but it was very firmly stuck. Thanks again in any case, system is clean and tidy again.
Thanks, very helpful.
You're welcome!
For big houses can multiple magnacleans be installed at different points, say 2 (1 return 1 flow) just before the boiler and another 2 (1 return 1 flow) halfway along the flow and return pipe?
Brilliant video the best one on RUclips
Thanks buddy. I appreciate that 👍
Hi. I have a question 🤔.
The scale filter. Should it be connected to the hot pipe. Or the cold pipe. 🥶.. ? Your video explains everything nice and clear. THANKS.
It's connected to the central heating system which runs the radiators. It's a continuous pipe goes from the boiler through all the radiators and then back into the boiler and you install it on the (return) pipe that goes back into the boiler.
Have an early one of these . After a few years the isolating valve were rock solid and couldn't be operated. Prob a good idea to exercise them in future...
Good point 👍
Was wondering why you looked so familiar, then I realised that I'd watched your carpet cleaner review :) I'm now thinking about George or a Bissell on the basis of that review! This was even better! Hope you venture into heat pump territory one day as would be great to know your thoughts on that in future. Thanks for sharing quality content!
Thanks buddy 👍 So my father in law borrowed that Vax and immediately broke it (he is heavy handed but it serves to illustrate what rubbish it is). He snapped a small piece of plastic off that keeps the vacuum standing upright, so now it just flops over every time you stop using it, unless you lean it against the wall. I'd say hands down George for most spot cleaning jobs, but for whole carpets possibly the Bissell. Trawl down through the comments to my video as there are some great recommendations. For plumbing vids, James at Plumberparts is awesome (knows much more about plumbing than I do). ruclips.net/user/plumberparts
Really good. thank you.
You're welcome. Thanks for the comment👍
Great video. I would like to see the install video too please. Thanks
Thanks! Yes, I'll be running that one at some point. Just got a few videos to get out first!
Can a boiler run with the magnaclean valves shut off? Mines leaking a lot of water unfortunately.
Hi Charlie, great video, can you install this to a oil fired system?
I don't see why not. Any system where water is circulating round needs one of these.
I haven't serviced my central heating for at least 10 years. I was worried before, but am terrified now! 😧 It's September and I'm in Northern Scotland, so I need to get onto it pronto! 😬
Good plan. Systems tends to fail when they're under most pressure - in the coldest months so now's a good time to sort it. 👍
Do I need to take any special pre-cautions with a pressurised system? Should I de-pressurise first? I know my system contains an inhibitor and I am concerned that I will dilute it by de and re - pressurising
It depends on what you're doing Ben. If you're just cleaning the filter, you can top up the pressure after, but it won't reduce the pressure much or substantially dilute the amount of inhibitor you've got in there.
Have you ever used the magna clean to add cleaner or inhibitor into your system? Thinking of doing it on mine as I have a serious sludge problem.
Yes Chris. Dosing your system is one of the best uses for this. You can't quite fit a whole container in though - thought I'd mention this as I've over filled mine once or twice!
Hi Charlie. Another awesome vid, thank you so much for hard work on these.
Do you think there's any benefit to using this on a system that's 5 years old, on a new build? The system was installed with Sentinel inhibitor and after a partial flush about two years ago during a boiler service, I topped up the inhibitor using the Sentinel Rapid Dose kit via the fill loop.
Thanks. Yes, all new heating systems should have these installed ideally, as you'll get some debris even with the inhibitor, and the added benefit is that you've then got easy access for testing inhibitor levels and adding more if required. Remember, my system was effectively new too, albeit 10 years old now.
Hi Fqlynx,
As a heating engineer I agree that one of these are an absolute must. All new boilers being installed now will say in the installation manual that a magnetic filter should be installed. Each boiler manufacturer will have their preferred filter brand or they will even insist on their own brand of filter. If your installer don't install the correct one, it may even invalidate the manufacturer's extended warranty.
This just shows how important the manufacturers feel these are.
Older systems can definitely do with a filter.
@@CharlieDIYte Nice one Charlie.
@@ChristianBHough Did not know this, thank you. Will ask Atag which system they recommend.
@@ChristianBHough Thanks so much for the comment. Every comment feed needs pros like your good self chipping in as it adds so much value. 👍
Thanks for this, I have the same unit which is due for a clean. The only problem is the chap who installed it took the spanner with him! Is it possible to tighten by hand? My grips aren't quite wide enough...
What an idiot - why would he do that?! You can buy them reasonably cheaply bit.ly/3bJ4B5a or on eBay for under a tenner. 👍
@@CharlieDIYte Thanks Charlie. I was able to loosen and tighten the top by hand in the end.
I cannot remove the lid on the Magnaclean unit. I have the correct spanner but it won't budge. Any ideas?
Can the magnaclean be used on a 22mm incoming cold water pipe into the house? Could be useful for cleaning the fresh water, not sure how this would effect the drinking water.
You would want a water filter not a Magaclean, because the magnet on the Magnaclean is designed to filter out magnetite, which comes from radiators. You don't get this in drinking water, which should have come into the house through blue plastic mains water pipe.
@@CharlieDIYte What water filter would I use?
I've just tried to service and water has just come from everywhere around the magnaclean mine hasnt got the drain at the bottom. . Please help!
How did you top the system up with the water that you lost?
It's a good opportunity to pour in some inhibitor, but failing that you simply screw the cap back in and then open the valves and open the bleed valve until water squirts out - then you know it's full. You just have to remember then to top up the pressure if you've got a pressurised system.
Do I need it for a complete new central heating system?
Yes you do, because the magnetite forms in new pipes as well as old. It's considered good practice to install one of these on all new central heating systems.
@@CharlieDIYte I'm tight on cash and plan to sell in the next 5-7 years. Is it still worth it?
Without one am I breaking the entire system or does the magnetic material just accumulate in the pump? If I service every year do I need one?
would be great if you coild do a video on how to fill and Repressurise a sealed system
OK. A few people have asked me to do the install video, so I'll add that to the list as it includes the process of re-pressurising.
@@CharlieDIYte Nice one Charlie any idea when? iv just ticked my bell icon lol cheers buddy...stay safe
I'd also like to see that video from the DIY aspect and not the professional plumber aspect, have a great day, Sir
Instal vid would be good
Thanks. I've added it to the list!
Hi Charlie. Apologies if this is already covered in the video or comments but what would you say to someone who didn't feel confident enough to install it themselves? I've done basic plumbing stuff in the past but not sure I'd fancy doing this one. I'm thinking I might get our local gas engineer to fit it. For them it's likely quite a quick and easy job and hence wouldn't be very costly. Then we then use it to clear out the system and service the device from then on. It's the thought of draining then cutting those pipes and fitting that I'm not sure I'm up for. Did you ever release the install video. I'll take a look at some install vids first. Have you heard what heating engineers think of the MagnaClean? Cheers Charlie 👍
Hi Neil, that's fair enough and I've a few friends that take your approach. Yes, get someone in to install it for you. The heating engineers and plumbers all think Magnacleans are fantastic. Definitely get one installed - it's a peace of mind thing. Depending on the size of your system you might need the larger one (as a friend of mine did).
@@CharlieDIYte Thanks Charlie. Sounds like a plan. We don't have a big house. It's a three bed semi, with small rooms, 9 rads and a tenth in a small conservatory that never really gets used above the frost setting on the TRV. I'll definitely see about getting one fitted. I noticed 'PlumberParts' did a great vid on the 'MagnaCleanse' contrasting it with the risks of pressurising during a full 'power flush' setup. Am I right in thinking you could effectively do the initial 'cleaning' process with just the MagnaClean? I suppose you would have to leave the cleaner in for a few weeks, use an SDS drill on the rads and then drain the whole system, refill and then add the inhibitor? I guess I'll ask the MagnaClean folks, and our engineer. Cheers Charlie!
@@neil9505 Yes you can do a huge amount yourself - that's exactly what you'd do and if you were able to agitate the radiators, even better! For example here, every time I've done some plumbing work upstairs I've pretty much drained down the whole of the upstairs. And when I installed the Magnaclean, I took the opportunity to drain the downstairs too - not so easy as some radiators were on their own loop back up to the circuit upstairs so had to be drained individually - whereas In able to pretty much drain the whole of the upstairs from a drain off on one of the radiator downstairs. If you do this you're effectively flushing the system - or removing a lot of sludge from it at any rate. The Magnaclean comes with a pot of system cleaner which has to be flushed out 28 days after adding it. Then the inhibitor goes in and prevents sludge build up going forward. It has a huge effect. The water used to come out of my rads black but it's now pretty crystal clear. The Magnaclean itself operates as a dosing pot to add the inhibitor to the system with. The only thing you have to be careful with, with old systems is being too thorough with the cleaning as it can cause pinholing in old pipes, I'm told.
@@CharlieDIYte Wow. Great stuff. Now I need to do a search for videos on how to drain a central heating system. :-) Our system dates from the 1990s (timber framed semi detached, non pressurised, gravity fed, with non condensing boiler and hot water cylinder. and I think it'll still be pretty sound. Good prompt though for something to be aware of though re' the pin holes. We've never changed the boiler as we 'didn't know how long we'd be in the house' aaaaaaaand, fast forward 14 years and we are still here :-)))
Where can I get help with flushing the system after I’ve added cleaner to the system?
Should be plenty of videos on that online Duncan eg Search for "how to drain down a central heating system" in RUclips and two PlumberParts videos come up - depending on whether you've got a gravity or like me, a pressurised system. What I did was a fairly laborious process of draining the system down completely, including each individual radiator at its drain off valve which probably drained down about 95% of the water, and I then refilled it with fresh.
Your diagram shows at 057 the filter is after the boiler...it should be placed before the boiler to filter the crap out of the system before it hits the heat exchanger...no compromise... mine is next to my cylinder...just before the boiler.
Sounds to me like both the cleaner and the Magnaclean are doing their jobs. The cleaner loosened up all the crud which has worked its way through to the magnet. The fact that you're still getting significant build up suggests there is still a significant amount of residual particulate in your rads and pipes.
Exactly Mr President. Could do with a power flush but this is managing the build up in the system quite nicely and provides a good dosing point for the inhibitor.
Charlie, perhaps you can do a second video in a further 6 months for another service to compare.
Hi Martin, thanks for that. I'm planning a general plasterboard fixings update video for some point this year.
Did u power flush
No but I've done a lot of work moving radiators and stuff over the last few years ago pretty much drained the whole system down after putting the cleaner in and dosed it with inhibitor afterwards.
I would have thought the company you used to upgrade your heating system would have fitted one....!!!
Seems strange they didn’t...?
Magnaclean vs Spirotech?
Show us the fitting video!
That pipe lagging above you reminds me a lot of that nasty asbestos pipe lagging you see in old properties 😳
I'm glad to say it's not (it's manky foam rapped in that old lagging material, although the ceiling panels could be...
Charlie run the install video please please..
I forgot I hadn't done that. I'll see what I can do but it will be much later in the year because of all the jobs stacking up...
Video please 👍
Thanks Robert. Not sure why I never did that vid. I'll see if I can find it. 👍
Good idea but if you have a good designed heating system with corrosion inhibitor then this
They advise fitting these in new systems regardless as you're always going to get some magnetite in the system over time of it has metal pipes.
🛠Charlie DIYte Amazon Tool Store amzn.to/3fcLnY4 - all my tried, tested and much loved DIY tools.
☕Charlie DIYte Buy Me a Coffee Membership bit.ly/3xuQ3zb - access our incredible Discord DIY forum and help support my Channel.
👚Charlie DIYte Official Merch Store charlie-diyte.myspreadshop.co.uk/ - all new range of professionally designed merch.
Nice video, shame the product is bad. The cap seal leaks after about 2.5yrs.
Hmmm. Mine hasn't. You can get new o rings and maybe try some plumbers silicone.
@@CharlieDIYteif you Google the product leaking is very common. I have 5 replacement seals at the ready and when repaired used silicone grease. Added a Google calendar reminder every 2 years for seal change.
Mine was in my house when I moved in 5 years ago and hadn't had any leaks
I flush my system every 2 years and fill with clean water.
Wow, that's impressive 👍
Magna clean is no substitute for a well flushed and inhibited system. If your systems clean the magna cleans a waste of money. It never protected any boiler ever. Calling it a filter is a lie. It's cheaper to flush properly than fit a magnet in a pot. They aren't terrible but are not necessary either. Spend your time flushing properly instead of wasting money on a magnaclean.