If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Greetings from Zambia! As an expat Canadian, living in Zambia, I found your channel and completely enjoy your excellent builds of all the various projects! Well done!! I'll be relocating to the UK on a few months and look forward to getting back into modeling. Virtually impossible to find a model shop here! O couldaol order items, but travel is difficult with built up models, so I'm forced to wait a little longer... Thanks for your channel and I look forward to seeing more!!
Hey all who are reading and coming up on these building stages. My person experience Hint & Tip:. The control surfaces ( ailerons, elevators, rudder ) didn't always snap together as easily as Wayne's. My plastic modeling skills came in handy. Good idea to dry-fit parts before gluing. In my kit, some of the female pin locators needed a slight opening up with a drill bit in a pin vise. Otherwise, they just would NOT snap in.
@@kevinpayne5584 hey Kevin....I am very aware of Wayne's greatness, been following him since the early days of the MF. No criticism was meant, or (hopefully) interpreted by Wayne.
You rock my world Wayne ,thank you so much for everything you do for us . I really do appreciate all your hard work you do for our pleasure, thank you so much again. !!!!
Hi Wayne, are you working on a video for Pack 8? Looks like Agora released Pack 8 a little early, but I like to watch your videos first before going into the written instructions. Thanks!
Hello Wayne that's very impressive this Mitsubishi A6M Zero fighter plane Japanese plane. Nice work on this model plane Japanese fighter. I enjoyed this video on this build. 🤗🙂☺😁😀🤑👍💔💘. Of all the Japanese fighter planes the Zero is one of them much had been written.
Hi Wayne, I noticed on your video that the electric motor (with the correction screws) you may have it installed opposite (Should be Black wire on top, Red Wire on the bottom, yours shows the opposite.) This may affect the rotation direction of the motor.
Really like the way this is coming along. And it's amazing to see how different this is to the spitfire in construction. P.s you missed the routemaster in the agora promo haha
You won yourself a cudley toy lol Great build looks very tricky but you got there, alls looking good. What's your favourite, this one or the spitfire i still prefer the spitfire .
One thing he should have mentioned . Is TURN OFF THE POWER SUPPLY before screwing the control horn on the servos. If you do not and you accidentally move the control horn as the arm is being screwed on . You will damage the electronics in the servo , and it will be ruined and will not work . So that you will have to buy a new component .
So, I purchased the first six packs of this model from the special that they had they actually gave me seven. My question is are there any items you get with this like the T-shirt that you are wearing?
I’m quite sure that at the end when you show the rough idea of how it will be the flaps will go at the back and guns pointing forwards 🤣 nice try though
Somthing's not right here. Your just over halfway through your zero fighter build/you get to test out the electronics. Yet we're almost finished on our MK1A Spitfire which is almost finished. We've haven't tested out any of the future electronic parts/LEDs+their's no gaurantee that they'll even work or not hmmm! 🤔😑🤷♂️
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Greetings from Zambia! As an expat Canadian, living in Zambia, I found your channel and completely enjoy your excellent builds of all the various projects! Well done!! I'll be relocating to the UK on a few months and look forward to getting back into modeling. Virtually impossible to find a model shop here! O couldaol order items, but travel is difficult with built up models, so I'm forced to wait a little longer...
Thanks for your channel and I look forward to seeing more!!
coming along nicely
Another perfectly done pack wayne.
Loving the build as all ways.
Stay safe all.
Always enjoy your show. Keep up the great work!!
Hi wayne glad to see this build really steaming ahead
That was a very interesting stage. All that metal to weigh it down a bit. plus those motors, Great build
Hey all who are reading and coming up on these building stages. My person experience Hint & Tip:. The control surfaces ( ailerons, elevators, rudder ) didn't always snap together as easily as Wayne's. My plastic modeling skills came in handy. Good idea to dry-fit parts before gluing. In my kit, some of the female pin locators needed a slight opening up with a drill bit in a pin vise. Otherwise, they just would NOT snap in.
It's coming together quite nicely Wayne. We'll see where pack 8 takes you. Looking forward to it. See you then.
World of Wayne, party time, excellent...🤟🤟
Great vlog as always , thanks so much W.O.W.
FYI....the little 'tab' you are sticking on each servo is usually called a servo horn
Excellent
Hay team DAX ease up. Mate, he's the best there is
Your so smart huh!!!
@@kevinpayne5584 hey Kevin....I am very aware of Wayne's greatness, been following him since the early days of the MF. No criticism was meant, or (hopefully) interpreted by Wayne.
@@TDax non takin this aint about me just think the world of him
Wayne, Where did you purchase you desk tidy square pots please, I looked on your store but not showing.
Its from a company called Model Designs who sadly are no longer with us
Hello Wayne good to see you this morning !!!!
You rock my world Wayne ,thank you so much for everything you do for us . I really do appreciate all your hard work you do for our pleasure, thank you so much again. !!!!
Great work dude.
Hi Wayne, are you working on a video for Pack 8? Looks like Agora released Pack 8 a little early, but I like to watch your videos first before going into the written instructions. Thanks!
Yep. I will be
Hello Wayne that's very impressive this Mitsubishi A6M Zero fighter plane Japanese plane. Nice work on this model plane Japanese fighter. I enjoyed this video on this build. 🤗🙂☺😁😀🤑👍💔💘. Of all the Japanese fighter planes the Zero is one of them much had been written.
Great Video Keep up the great work
This and the Spitfire are lovely models. They should do the mosquito and I'll be right on that one.
Are you goin to do a Tues live show ,quite excited about that if you do . thanks wayne !!!
Yep. Doing Iron Man
@@WorldofWayneUK hellll yes
@@WorldofWayneUK thanks so much for the fast response ,"you are brillant" sir really Wayne thanks😁
For the bigger screws that go into the display base itself. I use a PH1 screwdriver💡
Hi Wayne, I noticed on your video that the electric motor (with the correction screws) you may have it installed opposite (Should be Black wire on top, Red Wire on the bottom, yours shows the opposite.) This may affect the rotation direction of the motor.
Thanks Charles. I’ll check
Really like the way this is coming along. And it's amazing to see how different this is to the spitfire in construction. P.s you missed the routemaster in the agora promo haha
Damn it lol
That fuselage has more metal armour than the original Zero!
That clip on the Servo is called a Horn
You won yourself a cudley toy lol
Great build looks very tricky but you got there, alls looking good. What's your favourite, this one or the spitfire i still prefer the spitfire .
One thing he should have mentioned . Is TURN OFF THE POWER SUPPLY before screwing the control horn on the servos. If you do not and you accidentally move the control horn as the arm is being screwed on . You will damage the electronics in the servo , and it will be ruined and will not work . So that you will have to buy a new component .
Interesting build, and it looks like a design well thought out. when comes the P51?
Wayne, did you return the servo motors to the neutral position after installing all three?
Yes
super montage j'en suis au pack 1
I feel like you will need a WWII model room for all things you are building!
So, I purchased the first six packs of this model from the special that they had they actually gave me seven. My question is are there any items you get with this like the T-shirt that you are wearing?
No . I made that. I think it’s In My merch store. I don’t think there are specials for this build
This one is awesome ! Btw, when we get more of the Fast and Furious Dodge Charger?
Soon hopefully
I’m quite sure that at the end when you show the rough idea of how it will be the flaps will go at the back and guns pointing forwards 🤣 nice try though
Lol 😂
WHY NOT A SUPER COMPLICATED " 104 " , a large this A6M ?
Like video
You do realize that you had the tail pointing out of the engine right?
Yes. Deliberate mistake 😬
@@WorldofWayneUK lol
Your wings were backwards.
👍👍💞💞🐕🐕🍺🍺🙏🙏🇦🇺🇦🇺
Somthing's not right here. Your just over halfway through your zero fighter build/you get to test out the electronics. Yet we're almost finished on our MK1A Spitfire which is almost finished. We've haven't tested out any of the future electronic parts/LEDs+their's no gaurantee that they'll even work or not hmmm! 🤔😑🤷♂️
27:52 Cuddly toy, cuddly toy?