How to disassemble a MANUAL transmission
HTML-код
- Опубликовано: 7 авг 2024
- The gear oil I recommend for the Toyota C50 and C52 transmissions as well as any other manual transmission that requires 75W90 gear oil: amzn.to/2VWth1i
Part 4 of my Toyota C50 transmission rebuild and restoration series. In this part the transmission gets disassembled by a pro while I just film. We discover some additional things that need be changed other than the fifth gear and synchros. This is a step by a step video that should give you a very good idea on how to take apart a Toyota C50 transmission and many other 5 speed manual transmissions.
Watch part 1 here: • How to rebuild a trans...
Watch part 2 here: • How to rebuild a trans...
Watch part 3 here: • How to rebuild a trans...
Check out my blog: www.driving4answers.com/
Thanks for watching. Subscribe if you want more DIY, 4AGE and MR2
Song: Vigilancer - Can See
• [Progressive House] Vi...
#d4a #transmission #rebuild #howto #diy #toyota #c50 #c52 #aw11 #mr2 #mr2mk1 #corolla #celica #assemble #disassemble
D4A (driving 4 answers) is part of the amazon associates program 
Авто/Мото
The gear oil I recommend for the Toyota C50 and C52 transmissions as well as any other manual transmission that requires 75W90 gear oil: amzn.to/2VWth1i
Nice Video! Forgive me for butting in, I would love your thoughts. Have you researched - Tarbbatigan Cars Rehabilitation Tip (Have a quick look on google cant remember the place now)? It is a good one off guide for learning how to repair your car the easy way without the headache. Ive heard some interesting things about it and my friend at last got astronomical results with it.
Send me a link to the repair manual cant seem to find it free online
Thanks for sharing this. I'm having the same problem on a GM F35 5 speed in my Cobalt SS. The issue is very similar with it popping out of 5th gear. After watching this video I managed to pull my 5th gear apart and I can see the wear on the dog teeth. The procedure in the video was almost exactly what I ended up doing for my transmission. I'm going to try and source a new gear set and hopefully this does the trick. Thanks again for sharing!!!
Happy to hear the video was helpful. Sorry it's so shaky, it's really old, back from when I didn't know how to use a camera :)
@@d4a It's all good. I just found it extremely helpful watching a professional do this as well as point out what the worn teeth looked like as to my amateur eyes, I was unable to determine if mine were that bad. I was really hoping to pull my 5th gear apart and see a definitive answer to my problem and now I have. Now I just need to source a replacement 5th gear set which GM doesn't make readily available.
great video thanks for sharing you knowledge!!!
Good studies through this channel
Thanks for the video!
Fully equip to deal with Pandoras box 🤣👍Excellent video. You reach for a tool n its there. Thanks you
that's siK (kool sense) that he/they allowed u to get it filmed : d Great tune/music- +ing to my list along w/ "bass antics" from the valve clearance adjustment video
The C50 transmission is identical to the C150 transmission except for a few small differences. The number of teeth on a couple gears of the output shaft are different, and the shift lever is on the other end of the shift shaft too. With the Toyota repair manual for the C150 on my lap, I followed the steps in this video. The steps in this video are identical to the repair manual. All bolts are in the same spot.
this is great. i'm going to be ripping a c50 and c52 apart and installing a trd lsd as well as changing bits and pieces.
nice is vst method....
I have a 1986Chevy C60 grain hauler. It has the 366 gas motor and a manual transmission .When I purchased the truck 2nd gear did not work so I would shift from 1st high to 3rd low .now I have real problems,there is no 1st low or 1st high is this fixable? Need your input and expertise.... Thank you, Pete. Stranded in Iowa
awesome and useful video
Ionutzz Lana Thanks glad you like it :)
man you have very nice videos like it keep the good work
+CARS LOVER Thanks a lot man!
Hi Driving 4 Answers!
Thank you for the video. Would you please tell me which puller you are using to pull the 5th gear hub and gears off? I am disassembling mine and this is where I am stuck at the moment. Any help will be greatly appreciated.
Thanks!
My Corolla has the C50 gearbox with the 0:815 5th gearbox ratio. I'm swapping 5th gear for the 0.725 one out of a C53 for better MPG.
many thanks Sir for sharing, I hope you will make another video for ICE line engine assembly take measurement like tuppet clearances.
Cool. I was into it for a min.i liked the no b.s. just get to it but my eyes couldn't handle it.
Ashroyer86 I know, sorry. My video quality has improved greatly since this video
2:49 Those roller bearings are split when new. There's a couple sets like that in there.
briansmobile1 Can't believe you made it to 2:49 of this shaky video. Don't know why I wrote "a bit too easily" there, I was aware they come in two parts. Anyways, this is a really old video and I have improved greatly since :) but thanks a lot for watching and commenting, I appreciate it.
You bet man. This line of work is a labor of love. I have respect for all who walk this path.
briansmobile1 for sure dude you are alsome..
So nice
Great video
Hero .moter. ...
useful explanation
my hm282 is very similar yet i dropped a ball bearing while removing the 5th gear selector fork. is that where it goes?
good video
thanks for the video man
look at all dem gears, make me whana cuuuum!
I have a front wheel drive 3sge gearbox..second gear is not going in..if I select it on the box from inside the engine bay its not goin in all the way at all..
Great video but less music. I always hit the bolts and plugs with a hammer and blunt punch rather than stripping the socket head out and having to beat a larger one in it. Just my opinion.
good Mr
jesus the camera guy has 1 job, ONE JOB!
Are you using "Hazet" tools? (Sockets,wrenches and screwdrivers)
Hello, I'm from Libya, and I use Google translator to communicate with you. My car is Land Cruiser, Jeep, 1993 model. The gearbox is automatic, and it is clean. Suddenly the car does not go forward or backward, unless you turn on heavy four-wheel drive. What is the reason for this problem in your opinion? Thank you.
sounds like a transfer case
@@ThatbluMR2 The malfunction was fixed a long time ago. Yes, the reason was one of the gears
Wow this is a nice tutorial. Quick question, my C52 that I just installed has 5th gear pop out. Instead of locating another one I figured I would try to repair this one. A local transmission shop quoted me $200 to replace the 5th gear and components as long as I bring the parts. I ordered a 5th gear, synchro ring, needle bearing, spacer for needle bearing, hub, sleeve, and fork. I heard the input shaft bearing can be replaced while the 5th gear is removed. Is that true? If that's the case I'll bring him the input shaft bearing as well. Thanks in advance!
I'm glad you liked the video. The fifth gear pop out is incredibly common and if you want just a quick (temporary) fix you can actually replace it yourself with the transmission in the car. Read this: www.mr2.net/trackdayqueen/fithgear.htm
But if you want it done properly its best to rebuild everything else too. Often the pop out is caused by a bunch of different reasons, etc. My transmission had quite a few things bad so I replaced everything I could. Depending on your budget, time constraints, what you actually want to do with the car, etc. your options are either a quick cheap fix (as in the link) or doing it all. Since you already god the hub, sleeve, fork, bearings, needles, etc. get the rest of the bearings, synchronous etc. and replace it all maybe since the amount of labour will be relatively similar anyway. Ask your mechanic how much will he charge for the whole job and see if it makes sense to you. Good luck and hope it goes well!
muy buen video gracias
carlos acosta de nada :)
Nice video, very informative website, keep it up. What's the name of the track?
Hey thanks a lot! The song is: Vigilancer - Can See. I put it in the description now, I don't know know why I keep forgetting to do that. The music is from the heroboard channel, lots of great free music there.
Question: I have a 1997 Toyota RAV4, 2WD, 5 Speed, 4 DR. F250 Transaxle. Do you know which of the LSD can be installed? Be it Toyota, or aftermarket parts. Why this specific transaxle? Because its HD AND, it has an oil cooler pump inside, which I have a custom transaxle cooler. I use it to run Solo 1 and Rallies. Turbo, yes, in a few months.
Hi, is the C56 transmission similar to this one. Could I use the video as a reference to rebuild my C56
Please sir help us with the link or details for gear puller because that you can found their grip jaws is thick, can't fit and grip the fifth gear properly.
Is the procedure to disassemble the C52 the same as the C150?
good thing that these gearboxes last very long time
Is it Possible to completely recondition an old manual gearbox and make it new????
well.. at least i can say i managed to change the oil for my manual box: without either a pump oR a long funnel (1.9L or 2.0 qt 75W-90 full Synthetic Pennzoil Platinum gear oil)
fir a 2003 ulTimate Toyota Echo
becoz it's f.w.d car i can technically boast changing transmish _&_ differential fluid *
Anybody got audio? Or is it just me not getting it?. I already went back and forward watching other videos and audio is just fine.
Can You tell me please how many Nm is needed to turn on bolts, transfer case to transmission ( upper to lover case) and for the top cover of the case???
Thank You
milan savic I can't tell you from the top of my head, but it's in the Aw11 BGB (factory service manual) that you can easily find online.
Nice
Does it only look like? It seems to me quite possible, to repair the fifth-gear while the gearbox is still assembled in an AE82 Corolla ?! If the wheel arch of the left front wheel and the wheel itself is removed, there should be enough space to place the pull-off-tool ?! Is anybody experienced in that?
You can replace the fifth gear sleeve and fork with the transmission still in the car. I know it's possible with the AW11, it's also likely possible with other 4age cars. However, that is just a band aid fix. The problem is the fifth gear itself, and replacing the gear requires removing the transmission. Replacing the sleeve alone will buy you a few thousand miles, maybe 10k if you're supper gentle and lucky.
Ja gledam kad ono Hota .... ide lajk... pozzz
Hey can u explain a manual Transmission in a kia k2700?
suzuki mehran pakistan model How to change gear shifter seal ?
The one thing I was looking for was how to separate the main case from the bell housing and this video skips it at @11:25
Hit it with a mallet, or a tough piece of wood. Don't be afraid to manhandle a transmission; those dirty sluts love that shit.
@@navyninjagaming2551 oooo tell me more ;) haha
Cuantos balines lleva? Solo 3 ?delos ke ban en los resortes ke presionan las barillas
I took my manual transmission apart from my 98 eclipse to replace the plastic ring gear , now putting it back together and The damn thing wont go on all the way, theres about half an inch of gap left to close. Could it be out of place gears or??
It's really hard to tell without seeing it in person. Might be gears, might also be that the shafts aren't aligned with each other. I have a transmission assembly video too, you can see how tricky it is too put them back, feels like you need three hands.
I wonder how much does this service costs?
I SUBSCRIBE!
eliakim ardiente Thank you!
Nice Job! The FGR should be 16:69 (4.312) and not 17:69 (4.058).
Is this the same transmission you now use on the mr2?
Yup, the very one
Hola, me podrás enviar las medidas de los rodamientos?????
is it better to replace it or rebuild
Gaila Allison That's a good question. Buying a used transmission is cheaper and takes less time, but you really don't know what you bought until you install and drive it. Rebuilding is more time consuming and expensive but you know exactly what you have and that it will last longer than even a good used one. In the end, like most things, it depends on time, budget and your priorities.
I have toyota tercel 5efe manual 5 gear, this transmision is the same?
Honestly I don't know, this is a C50, do some googling and you should be able to figure it out easily.
i have one question ...what are those magnetic "indents" he removed behind those allen key type bolts? what do they do?
At which point in the video? There's just one big magnet. Do you mean the little balls? (haha)
lol yep the balls...
pornokid333 It's called a ball detent. Here's the full explanation: en.m.wikipedia.org/wiki/Ball_detent
always a bit wary of opening up gearboxes. Do you buy full rebuild kits first? until all stripped u dont know what's worn out = catch 22! for me.
+conrad simpson it's a real catch 22 you're right. In this case I bought a full rebuild kit in advance. I wanted to be sure it will be good for as long as possible.
Disassemble manual gearbox of Ford ranger 2.2 manual gearbox. 2014 model
This video brought you to a damage eyes
my Toyota Marino Silvertop pops out of fourth gear... is the synchro too?
great vid by the way.
+Willem Jovner Synchros grind, popping out is usually due to worn gear and sleeve teeth or worn shaft bearings.
Thank you
Willem Jovner very nayes
Search for books or magazines about how to disassemble the box of Taurus and fix it
haissous nouredden
awesome. !! i need a guidance brochure . do you have it !!!
huu son Pham Look for the toyota service manual for the mr2 mk2 aka the big green book. Also you can find exploded views of the transmission on toyodiy.com
I think I need a guidebook
I need data sheets for my daihatsu 1996 car p🙏
Camera work and music are distracting!
Does this 5th gear happen in c15 transmission?
I wouldn't know, but most likely not.
Learning his boss...from indonesia.succcses bos.thankyou
Welcom my canel
I like the music in your videos ...who is it?
+jesse brown Its mostly stuff from a channel called heroboard, lots of different royalty free music and artists there.
OK thanks!
Imagine welding that diff :D would be a lot of fun for my mr2.
Do you have instagram?
Javier Broger Would be a fub experiment, but probably a huge pain for dd. Don't have instagram, keep reminding myself to make a profile every day. Might happen this week :)
I have two c50 gear boxes, maybe i will.. Post a video when you create your istagram!
How much does this usually cost if I have my transmission out?
It really depends on where you live and what needs to be replaced. 500$? Is a super rough ballpark and it could be totally off. It also depends on the type of transmission and other factors. It's like asking how much does a jacket usually cost. Anywhere from 20$ to 2000$ :)
Thanks for the information. Damn Mitsubishi! Keep up the awesome video. You’ve earned my sub. I live around Los Angeles. It’s a manual 2007 eclipse 5 speed
I'm guessing a grand, parts and labor included. But don't quote me on that.
driving 4 answers thank you for the reply. I already got the transmission all out
Getting it out is just part of the labor. I accounted for it being out. Everything else you see on the video is labor too.
How to disassemble that manual transmission but not all manual transmission can be disassemble the same way
Here last one ratio 17:69 is what ?
Lots of work just to change the transmission oil??
I don't get your question. Its a complete overhaul.
You dont have to pull it all apart to change the transmission fluid, you can change it whilst its on the car, just unscrew the plug and to refill, unscrew the refill nut and pump the oil in.
You need a cameraman
Chris Edwards True. This is sn old vid. Check out the new ones. Big progress :)
hahahaa yes yes😂
waht sound track?
Helder Vieira Vigilancer - Can see. It's also in the description.
Captain wobbles behind the camera
it's honda acty?
1987 Toyota mr2
Can the C50 trans work with the 7afe?
The 7afe came with the c52 from the factory, which means the c50 will bolt up, but unless rebuilt with the right parts the c50 is inferior to the c52
@@d4a but for sure itll work? Plug and play everything. I dont care about the gear ratios just wanted to know if itll work perfectly with the 7afe.
@@jasonrebourne95 I already answered. Now you want me to give you some sort of guarantee it will work even though I have absolutely no idea who or how will be installing the transmission? As I said it will bolt up to the block, that's all I can say. When it comes to the clutch and flywheel it's your job to double check and research that. All the information is out there.
Ok i got it. How about for the axles? Can i still use the 7a axle for the c50 or do i need to use the 4a axle for the c50? FYI Im getting the c50 from a 90 toyota corolla 4afe for my 97 corolla 7afe. Auto to manual swap.
Where do you reside?
+GeeTR 63-71 Europe, Balkans.
Can you hold the camera still please???
camera man needs smacked with that speed wrench
anthony shroyer Hahaha. I was the camera man. You're right this video is really shaky. I have improved the video quality a lot since then.
were you drunk while filming, or why did you move like that? :)
Eon gearbox videos
Jel to Suad Hota rastavlja mjenjač?
Jeste!
If you misshifted you will need to disassemble the engine next 🤑
God an engine rebuild looks less complicated than this LOL.
It is. A lot less complicated actually.
That's some crazy skills. I want to grab a junk transmission off the junk yard and just take it apart for education sakes.
+Anson L This isn't me. This is a pro. This guy built a 768 hp lancia delta integrale.
please help me reply me i have a problem i m using ford fiesta 2009 tdci engine today im facing some problem with my gear shifting when i move my car with 1 2 3 it has some weird sound but when i use top gear it doesnt have any sound and car runs smooth whats the problem please reply im your subscriber pls tell whats the problem...
It's impossible to diagnose issues like that through messages. It could really be dozens of different causes. You need to have it checked by a professional.
driving 4 answers tq for reply before consultant a mechanic just i what to know whats the problem for my idea purpose
driving 4 answers ok iwill explain clearly when i move my car with 1 2 3 it has some weird sound (grinding) sound will come when clutch is released but when i press the clutch the sound will not come. when i use top gear it doesnt have any sound and car runs smooth. whats the problem please reply me
Vishwa Rychuri Based on your description sounds like worn synchros. Or might be your clutch slave cylinder not disengaging the clutch fully. But still, this is not reliable. Take your car to a mechanic
Diju remove the miyooowzik fur thiS?!؟😮😒
are you in any of the mr2 Facebook pages?
+Nick Pahls I am in the MR2 Owners of the World group. I'm on facebook as mrtwomkone hero, but I am honestly not that good with facebook, mostly just put up links to my youtube videos :)
sweet! was just going to hit you up about the transmission.
Feel free to ask anything. I'll be happy to help anyway I can.
why the music. hate music in these vids
mute it and stop whining
josinaldo
Ehem, well thanx to youtube videos and everyone doing things themselves nowadays, I no longer have a job!!!
Thanks for the video content! Forgive me for chiming in, I would love your initial thoughts. Have you researched - Tarbbatigan Cars Rehabilitation Tip (Sure I saw it on Google)? It is a good one off guide for learning how to repair your car the easy way minus the normal expense. Ive heard some interesting things about it and my friend Sam after many years got great results with it.
Cool vid, get someone who knows how to use a camera next time though
قناه شريف على اليوتيوب قناه شريف عبد الجليل ارجو مشاهده الفيديوهات والاعجابات السلام عليكم ورحمه الله وبركاته
ger box fiat
Why the damn music.
TOOOOOOOO MUTCH CAMRA MOVMEN
Penak sampean pak