Super interested in the next brushed setup ur testing. I need some combo for my (kids) gatekeeper. The 9mph was nice but crawling is our main function! Thanks for the videos!!
I hope that thousands of years from now, a future civilization discovers these rock ruins in your yard and studies them to figure out what they were for. 🤣🤣🤣
Thank you exocage rc! I have been saying to ppl that the only reason you should get a fusion is if you absolutely have no room for an esc like in a scale rig that’s not going to be ran a lot. It’s not practical for someone if they have room for an esc which is most rigs and plan on running their rig a lot. I know this from experience I went thru 3 of them and the foc will break parts and in my case commit suicide. Something was binding and I didn’t know and the motor got hot and the esc is attached to it therefore it got hot and burnt up even though I had the temp cutoff at 180. I actually cut the esc off the can and wired up the motor bc it’s still good. If it wasn’t attached to the esc I would have a good motor if the esc burnt but the esc wouldn’t get that hot if its separate anyways
Hey Joe how much does your STH truck weigh I have a lot of log trucks and modded kits/RTRs but just curious I think I am going to switch the foams in mine to see if it helps it out
- I "totally" dig it Joe !!! 😯 ... I see what yer goin' after, AS ALWAYS !!! 👍 ...A high powered motor... ( Kv = potential Top "RPM's" )... ... "plus" a ton of "CRAWL-ABILITY" ... - [ LOW - END "CONTROL" ] !!! 👌😉 - "Meaning" ...most of the time, "this is what" - you, and I & many other - ..."pedal to the metal" guys, (are after), for our RC Crawlers !!!! 😁 **The Best, of Both Worlds"** !!!!! 🤘😜 ...AGAIN, GREAT STUFF, JOE !!! 😎 **IT "WOULD" BE GREAT TO SEE THESE TOP LEVEL (ESC - DESIGNERS)** ... **COME TOGETHER, TO CREATE & PUT TOGETHER AN (ESC)** ... ...**OF THE BEST FUNCTION, - AND HIGHEST QUALITY** - by RC companies like (Holmes Hobbies), (HobbyWing), & other great RC, "ESC - designers" !!!! 💪🇺🇸
Holmes and castle have been sharing info for a long time, where do you think the castle slate motors came from( just speculation, however timing seemed almost too convenient). But seriously some of the best engineering minds work over there at Holmes hobbies, anything I ever got was top shelf, some of the best stuff on the market. and totally on point with their customer service team.
Holmes hobbies is an American company and the customer service is top notch and all his stuff has warranty and is compatible with any other setup except hobbywing bc the hobbywing sensor cable now only works with hobbywing. Castle is an American company too
6 years ago to get that kind of low speed control out of an unsensored setup was only a dream. John just makes some really killer setups
Love that sloooow crawl. And the silence! Doesn't sound like a dying pig can't stand that castle whine
Hi JOE VERY INTERESTING motor and ESC. I've just ordered myself the new fusion pro 2300kv. Take care Buddy Hope you have a great weekend 🇬🇧🇺🇲🕊️✌🏼🤩👍🏼
That motor and esc combo did great. I’d be interested to see how it does sensored.
Finally Friday! I Gotta jeep jamboree event on Sunday!
O yeah looking forward to much more fun stuff!
Super interested in the next brushed setup ur testing. I need some combo for my (kids) gatekeeper. The 9mph was nice but crawling is our main function! Thanks for the videos!!
If it’s that smooth without sensor it’ll be crazy smooth sensored
Sweet! Love that truck body.
Not sure if that motors diameter is bigger then a cm expert. But with light Dremel work you can fit a 9t with stock Capra trans case with no problems.
I’ve done that before on one of my trucks. It can use that 9t or the Treal trans case since that gear can be moved down and fit a 9t easy.
How is the drag brake does it hold good?
Hay Joe how you doing just got to Clearwater today
I hope that thousands of years from now, a future civilization discovers these rock ruins in your yard and studies them to figure out what they were for. 🤣🤣🤣
😂😂 maybe they’ll see petrified name plates and figure those out. LoL
@@ExocagedRC lol! I think they’ll be even more confused.
“Climb time? That proves it was an ancient calendar”. 😂
So this motor is sensored but it doesn’t need it?
Is it on 3s ?
For a class 1 comp rig would you use the 10 shooter or Fusion Pro?
depends on room in the chassis. Both are awesome
Thank you exocage rc! I have been saying to ppl that the only reason you should get a fusion is if you absolutely have no room for an esc like in a scale rig that’s not going to be ran a lot. It’s not practical for someone if they have room for an esc which is most rigs and plan on running their rig a lot. I know this from experience I went thru 3 of them and the foc will break parts and in my case commit suicide. Something was binding and I didn’t know and the motor got hot and the esc is attached to it therefore it got hot and burnt up even though I had the temp cutoff at 180. I actually cut the esc off the can and wired up the motor bc it’s still good. If it wasn’t attached to the esc I would have a good motor if the esc burnt but the esc wouldn’t get that hot if its separate anyways
Hey Joe how much does your STH truck weigh I have a lot of log trucks and modded kits/RTRs but just curious I think I am going to switch the foams in mine to see if it helps it out
wich motor is the one that the ouside spins
Outrunner. This is an inrunner used in the video
- I "totally" dig it Joe !!! 😯 ... I see what yer goin' after,
AS ALWAYS !!! 👍
...A high powered motor... ( Kv = potential Top "RPM's" )...
... "plus" a ton of "CRAWL-ABILITY" ... - [ LOW - END "CONTROL" ] !!! 👌😉
- "Meaning" ...most of the time, "this is what" - you, and I & many other -
..."pedal to the metal" guys, (are after), for our RC Crawlers !!!! 😁
**The Best, of Both Worlds"** !!!!! 🤘😜 ...AGAIN, GREAT STUFF, JOE !!! 😎
**IT "WOULD" BE GREAT TO SEE THESE TOP LEVEL (ESC - DESIGNERS)**
... **COME TOGETHER, TO CREATE & PUT TOGETHER AN (ESC)** ...
...**OF THE BEST FUNCTION, - AND HIGHEST QUALITY**
- by RC companies like (Holmes Hobbies), (HobbyWing),
& other great RC, "ESC - designers" !!!!
💪🇺🇸
That was hard to read Dude.
Holmes and castle have been sharing info for a long time, where do you think the castle slate motors came from( just speculation, however timing seemed almost too convenient). But seriously some of the best engineering minds work over there at Holmes hobbies, anything I ever got was top shelf, some of the best stuff on the market. and totally on point with their customer service team.
love hobbywing but dang tired of waiting for stuff to go into stock
Holmes hobbies is an American company and the customer service is top notch and all his stuff has warranty and is compatible with any other setup except hobbywing bc the hobbywing sensor cable now only works with hobbywing. Castle is an American company too
First to comment
Yep!