Cheap Easy Way To Build Custom Above Garage Door Shelves DIY
HTML-код
- Опубликовано: 1 фев 2023
- 👋 Today We built some custom shelves that go above the garage door. Time to clean up the garage space a little bit now that we are settled in to our new house. I ended up only using 8 2X4's, 1 piece of plywood, 8 big 4in bolts and a pack of 3in decking screws and about 20 2in deck screws. All and all this will be less than $80. Just using some basic power tools like my 4in circular saw, nail gun, impact drill and power drill I was able to cut everything together to make sturdy shelves for the garage. Do you have a garage and don't know what to do with all of the space? Check out our video for a cheap, easy way to build custom above garage door shelves. This project is perfect for small spaces or for adding extra storage to your garage! This DIY project is easy to do and can be completed in just a few hours. Not only will you have a beautiful storage system in your garage, but you'll also have saved money on the project! So why wait? Watch our video and get started on your customized above garage door shelves today! Are you looking for a way to organize your garage without spending a fortune? Check out this DIY project for custom above garage door shelves! This project is easy to follow and can be completed in just a few hours. By building these shelves, you'll be able to organize your garage and save money at the same time! If you're looking for a simple, easy way to improve your garage organization, check out this video!
Ryobi 6 Piece Tool Set
amzn.to/3WxiLuX
Ryobi Nail Gun:
amzn.to/3H5q5Ip
Saw Horse:
amzn.to/3ZX2UZB
Garage Renovation Video: • Turning A Trashed Gara...
🤠 Check Out Our Aftermarket Car Part and Merchandise Website!! brosfourrspeed.com
Our Car Accessories:
www.lasfit.com/
SAVE 10% by using "Brosfourrspeed10" on your next purchase!
Our Equipment:
- Cannon M50: amzn.to/3CTphmE
- Rode Mic: amzn.to/3XTKurs
- Joby Suction: amzn.to/3SCrWZ7
- 64GB SD Card: amzn.to/3bJQwUK
- GoPro Hero 10: amzn.to/3H7eRVK
- DJI Mavic Mini: amzn.to/3uoOfHS
- Apple MacBook Pro: amzn.to/3gSIdMD
- LowePro Bag: amzn.to/3wi1wlX
- Tripod: amzn.to/3cJMAr1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheap Easy Way To Build Custom Above Garage Door Shelves DIY
Music By: www.epidemicsound.com
#garageshelves #howtobuildgarageshelves #garagestorage 
Авто/Мото
Nice job. I like the angle supports instead of vertical on the corners. Makes it look more open and smaller. I may tackle this in a few weeks in my garage.
Interesting build, but I suggest strengthening where you attach the angled 2x4 to the garage wall. You have only one bolt going into the stud wall but it is very close to the top edge of the 2x4. Any heavy weight and the 2x4 could split and the shelf will come down.
Yeah I've kept an eye on it. So far I have less then 100 pounds on each shelf. It can hold my body weight fine. But if it start to sag at all I'll had something
Just completed one side... now my husband wants me to do the other. Thank you for the idea!
Nice! We love these! Been very useful for random things!
Great video. Nice job utilizing all your space
This is awesome. I am planning to do something like this, and this is going to help me a lot. Thanks for putting all the info.
Glad it was helpful! These have been super useful!
Just finished mine followed the video to a T, thanks man they came out great!
Awesome! We still really like them. Been super usable!
Great job y’all. What a great use of otherwise useless space. 👍
Thanks! Yeah it really freed up a lot! And now when I'm filming in the garage, things look way cleaner!
Love it!
Came out good ;)
Good job folks
Thanks!
Now you have a place to sleep when you have an argument.
haha I do fit nicely up there!
Great idea!
Thanks!
dude, well done. I wish had a garage as neat and open as yours.
Thanks! What size garage do you have?
Was looking for vids for hanging shelf’s but I like these better.
Yeah I thought about the hanging metal ones. But the nice ones would have been like $300. More fun to built it like this and was super cheap
Awesome shelves. Im doing the same thing
Thanks! I really like them. Been very handy!
I may actually look into this! Gives me a place to put more stuff 🤣🤣
Definitly a good project to free up space!
Great video
Thanks!
Nice motorcycle 😉
Thanks ✌️
Very good home diy project thank you for sharing!
Thanks! Came out really good and the garage is so much more usable!
I would recommend buying a pocket hole jig! Great build.
For what?
@@BrosFOURRSpeed pocket holes provide stronger joints, a better looking finish, and won’t split wood. It’s perfect for this type of project.
@@TheBrookerFamily Drilling pilot holes would do the same! Being above the garage, not too important for that! Inside the house I could see!
@@BrosFOURRSpeed grab some new drills while getting the bits. Lol cool idea btw. Would’ve never thought of storing stuff up there.
Great job! I’m curious to know if ther is ample space to do any maintenance/repairs on the drive chain unit. Other than that, it’s awesome!
If I had to replace the garage door springs, I'd probably just remove the shelves. Easy enough to do if I had to do that. Garage door motor and chain are all perfectly accessible
Probably would’ve painted it before mounting but overall great job. I wonder if I could build something like this but with vertical supports to the ceiling and use it to store my spar elumber
It was easy enough to paint once done honestly. But very helpful shelves! I've sure you could make a support to the ceiling
@BrosFOURRSpeed - How much weight do you think this would hold?
Also, Love the video instruction!
With everything bolted in, I would assume a couple hundred pounds! I could hang from it, it’s pretty solid in the studs!
great stuff!!! Was there anything that required you to make them that wide or could they have been wider?
I just made them the size of a piece of plywood basically. Cut the plywood in half length wise and fit it since the garage tracks.
I always thought it would be nice to have a lift in the garage to make things easier.
Yeah one day I want a lift! Next house for sure I'll be doing that!
What kind of horse and 2x4 holder are you using at the 1:22min mark?
Could you provide info on it?
amzn.to/3PxlDq5
Here yah go!
Can u suggest how to make the doors to a solve like this Mariapaula Steel Height -Adjustable Shelving Unit
You can probably just make wood doors. Heres a video where I made doors for our closet and laundry room. ruclips.net/video/HOGg5yF4agE/видео.html
ruclips.net/video/f6JfVOCkiVM/видео.html
I'm thinking to something like this, but on the other side. Do you think it is safe to use it if somebody open the door while you are in the lader ?
You wouldn't want to have the latter at these and open the door. You'll get hit. With the door closed is when you would put stuff up there or take it down.
Could you make this wider? I have a square roof rack for my car that needs to be stored
Yeah you can make this however best fits your space. I basically did half a sheet of plywood and it worked for what I needed
with typical door springs that would prevent winding/unwinding them.
Maybe. But if I have an issue with the springs I can easily un bolt these and fix the door and then reinstall them.
@@BrosFOURRSpeedI don’t think you have a typical spring
@@JohnDoe-mp1zk Doesn’t look like it. I’m not too worried about
@@BrosFOURRSpeednah you have a torquesmaster. That shelf will not be in the way. I just changed my springs out
@@TzUuup that’s cool to know for long term
Who else noticed his wife on the shelf
haha your the first comment on that!
How tall are the ceilings?
10 ft
Easier to paint before it all goes up, no? Not sure if thered be a concern in doing so thats why i ask.
Honestly just as easy to paint after. Won't really make a difference
Angular torque not a good idea! Your weight will put more stress to the 2 outmost screws held by the wall through side supports. Better to have it held straight up to ceiling, of course, to a stud.
Yeah I thought of that. But thats why I did the big bolts through the 2x4 into the studs behind the wall
this is bros fourr speed out of context
Lots of people like home renovation projects. Plus this was garage related.
With where you mounted it, you basically bought an engagement ring to that Wayne Dalton Brokemaster. You're going to be having the WD techs come put new springs in that bad boy every 3 years lol, no torsion conversion for you.
What?? This doesn’t effect the garage door in any way.
Congratulations, you just created a garage door repairman nightmare.
Just wait until the springs fail and need to be replaced.
This won’t interfere at all. My dad actually just had to replace the springs on his and storage up above won’t hinder that job as he just did it.
Ugh definitely forget this video
You don't like improving your garage?
@@BrosFOURRSpeed nope because I'm not an adult lol
@@thomasdataanylist haha good reason! When your older you’ll value better home storage solutions 😅
@@thomasdataanylistgood answer lol
Why the ear muffs?
So I don’t go deaf. Why not protect your hearing?