I foam with bilt hamber touch-less , let is sit for 5 minutes and pressure wash rinse off, all bugs and dirt are gone , yesterday tested if I had to do the contact wash afterwards and I came to the conclusion that my car was 99% to clean. That works so good on my coated. White BMW g21
Thanks for producing these videos! I learn a lot from your content. I purchased the bug remover and also purchased the ceramic seat protection product you used on Brandons car. I have a 2023 Ultra Red model S Plaid with the white interior and enjoy everything about the car.
Very timely, I just bought this 3D bug remover a week ago! Seems to work a bit better than Adams. So there’s my suggestion for a head to head comparison
Just did a vacation to WDW Orlando from Cleveland in my model Y (ended up being about 2200 miles round trip counting my in town miles there). The front was caked and covered in bugs. I stopped at Walmart when I got back and the only bug and tar remover they had was a turtle wax product. I sprayed it on when I got home from store unloaded and put away my the groceries that I picked up at the same time then went back outside and just rinsed off with a bucket I filled up and then used a microfiber rag to dry it up and get any remaining residue. Worked great and I think that product was just under $6.
Geez. Gyeon is out of Bug & Grime Remover, so I just got a bottle of this yesterday. Didn't see the gallon option, and will do that the next time. Thanks.
Great videos! Any recommendations on integrating this into an ONR wash process on Tesla Model Y? Or recommendations on other product/s for removing bugs when using the ONR wash process?
went to Amazon to pick some up, but saw more than a few reviews saying the product etched the glass or ruined black plastic on their vehicles, can you comment on what might cause this? Too high of a concentrate, leaving product in the sun to bake?? I understand the need to follow the directions, but if it ruins the car if things are 100% perfect, I don't feel it's safe for the general public to be using.
@@OutofSpecDetailing 100% agree, my question is in this case what did these users do wrong to cause this product to etch the glass. Just for us that aren't professionals. Is that an example of applying in high heat/direct sunlight and letting it dry. Is it using the concentrate with no dilution at all. We are all guilty of not following directions 100% so always good to know where the limits are.
I live in a city and don't have easy access to a hose/water, do you think I could just spray this solution on and then wipe it down with a cloth? or a wet cloth? or maybe pour water over it?
I have a question. I have a Tesla Y on order to arrive within the next two weeks. Do you suggest some sort of coating or PPF on the vehicle or leave it as I receive it and wash as per this video?
I was using P&S Bug Off, but I’m thinking I may make the switch to this stuff! It’s more concentrated, and a gallon seems to go a lot further with the same results!
@@OutofSpecDetailing 👌🏼will do just wondering what they preferred, would be helpful. Great idea for this series, thanks for your knowledge & sharing your technique I’m switching to thé “Coleton Way” Enjoy your Hyundai but once you get seat time in an Ioniq 5 N you’ll never drive your Tesla again! 😉🏆🏁
I foam with bilt hamber touch-less , let is sit for 5 minutes and pressure wash rinse off, all bugs and dirt are gone , yesterday tested if I had to do the contact wash afterwards and I came to the conclusion that my car was 99% to clean. That works so good on my coated. White BMW g21
Thanks for producing these videos! I learn a lot from your content. I purchased the bug remover and also purchased the ceramic seat protection product you used on Brandons car. I have a 2023 Ultra Red model S Plaid with the white interior and enjoy everything about the car.
Spot on. I buy it in gallon size also. Great product.
Very timely, I just bought this 3D bug remover a week ago! Seems to work a bit better than Adams. So there’s my suggestion for a head to head comparison
I use Bilt Hamber Touch-less diluted 5%.
Incredible stuff, utterly amazing.
Just did a vacation to WDW Orlando from Cleveland in my model Y (ended up being about 2200 miles round trip counting my in town miles there). The front was caked and covered in bugs. I stopped at Walmart when I got back and the only bug and tar remover they had was a turtle wax product. I sprayed it on when I got home from store unloaded and put away my the groceries that I picked up at the same time then went back outside and just rinsed off with a bucket I filled up and then used a microfiber rag to dry it up and get any remaining residue. Worked great and I think that product was just under $6.
Another great video! My black R1S takes an absolute pounding with bugs so I’m getting this remover ASAP!
Geez. Gyeon is out of Bug & Grime Remover, so I just got a bottle of this yesterday. Didn't see the gallon option, and will do that the next time. Thanks.
You’ll like this much better
Great videos! Any recommendations on integrating this into an ONR wash process on Tesla Model Y? Or recommendations on other product/s for removing bugs when using the ONR wash process?
I switched from Bug off to this 3D Bug remover. It works so much better and dilutes way better as you mentioned. Priced well too.
Good video!
I've always had good luck with Turtle-wax Bug and Tar remover. (used for 30 yrs).
Can this still be used safely on a ceramic coated surface? I don’t want it to break down my ceramic coating. Is it ph neutral?
Yes
Thanks for the video but not only did you not post a link for the dilution bottle but it is not on your must-haves pages either. Please post it
How do you compare it to using ONR for bugs?
Great video important info! Thanks
I would love to see DIY Rinse Less Wash 256:1 vs bug remover.
Excellent review, thanks. 👍😎🇺🇸
The bug splatter is off my car but there clear residue from the splatter still visible. Will this remove it?
Thanks for the video, I cannot find your turbo nozzle in your Amazon links.
What's your take on just using a strong APC instead of a dedicated 'bug remover'. I hate of having products for a single job.
Great video and detailed
I assume you’ve used Adams’s bug remover? Is it similar to this one? Thank you!
What spray bottle is that?
went to Amazon to pick some up, but saw more than a few reviews saying the product etched the glass or ruined black plastic on their vehicles, can you comment on what might cause this? Too high of a concentrate, leaving product in the sun to bake?? I understand the need to follow the directions, but if it ruins the car if things are 100% perfect, I don't feel it's safe for the general public to be using.
With every single detailing chemical on the market, if used wrong it can damage vehicles.
@@OutofSpecDetailing 100% agree, my question is in this case what did these users do wrong to cause this product to etch the glass. Just for us that aren't professionals. Is that an example of applying in high heat/direct sunlight and letting it dry. Is it using the concentrate with no dilution at all. We are all guilty of not following directions 100% so always good to know where the limits are.
I live in a city and don't have easy access to a hose/water, do you think I could just spray this solution on and then wipe it down with a cloth? or a wet cloth? or maybe pour water over it?
Where do you buy the dilution bottle?
Search for "Carpro dilute spray bottle".
I also notice that not only was a a link to the dilution bottle not posted but is not on his must haves pages.....I hope he can add it!
Car pro dilute spray bottle
Seriously? Any spray bottle available at your local Walmart or Home Depot will work.
@@dalececil7527 Seriously..you just can't use ANY spray bottle because a typical sprat bottle is NOT a dilute bottle. You are a jerk.
I have a question. I have a Tesla Y on order to arrive within the next two weeks. Do you suggest some sort of coating or PPF on the vehicle or leave it as I receive it and wash as per this video?
Paint correction & ceramic coating!
can you turn the audio channel down when using the loud pressure washer and other loud tools?
What brand bug remover do you use at the shop?
I was using P&S Bug Off, but I’m thinking I may make the switch to this stuff! It’s more concentrated, and a gallon seems to go a lot further with the same results!
@@OutofSpecDetailing Can you foam this like the P&S.
What brand is the turbo nozzle? I couldn't find the link for it. Thanks.
Do you get those dilution bottles on Amazon? Can't seem to find them 🤷🏻♂️
What Turbo Nozzle is that?
I think it's the MTM Hydro brand.
Which one is best for PPF?
are you guys still working on ppf on the new model?
I'm happy with Seafoams bug remover
Hi will this work on my Tesla Cyber Truck ???? What spray bottle are you using ????? Thanks for any help !!!!!
Very informative video
What psi is your gun shooting at?
1200
Using a pressure washer should clean those bugs on its own
What is the ratio of their premix bottle?
Great question, I have no idea! I searched and searched for this. As I said in the video, just get the gallon. You’ll go through 16oz quickly!
@@OutofSpecDetailing 👌🏼will do just wondering what they preferred, would be helpful. Great idea for this series, thanks for your knowledge & sharing your technique I’m switching to thé “Coleton Way” Enjoy your Hyundai but once you get seat time in an Ioniq 5 N you’ll never drive your Tesla again! 😉🏆🏁
Is it safe to use on PPF ?
Yes
Thank you
I love this video
Hello sir, I have a new batch of polishing machines recently. Would you be interested in helping me test them?
On Amazon it says it is good to use on metals - do you think it is ok to use on the Cybertruck?
It’s actually amazing on the CT. I need to make a video on it!
life hack: use a wet dryer sheet to remove bugs.
Please don’t do this… yikes
That video was about 20 minutes longer than it should have been.
too long bro. make it shorter
Agreed