Just got mine, I'm stuck setting up, instructions tell me to flash the esc but Most of the other stuff comes pre set up, do I need to flash the escape with the bluejay software in order to fly or can I skip that step?
Greetings, I recently started in the fpv buy the radio station master pocket radio and drone mobula 8 uart lrs, select this to bring the version 3.3.0 of elrs I thought it would be easier, set the transmitter according to some videos set a profile and enter the basic vinding option by connecting and disconnecting the drone battery, the signal appeared on the screen of the transmitter, I put acro mode and moved the controls but nothing happened, When connecting the drone to the betaflight configurator the drone appears but not the transmitter, I have seen many tutorials and moved options, I even installed a firmware that I saw in a video, this without being very sure because it is the first time I deal with the configuration of a drone, I do not know if I have made it worse or what firmware to use to make it work, I do not know what to do, I do not know if you can give me inficacion of the steps to make it work that firmware to use what version, what motor output to use, how to put the ports, in short what is needed, I know it is a lot but I have asked everywhere and no one tells me much, I do not know what to do, I hope you can help me, I do not have much money but if you could help me I would be willing to pay you for your time, hopefully you can help me.
Just make sure your radio and your drone are both on on elrs 3.x. And what word for me was I had to erase the binding phrase that I set up in my radio. I don’t know why I just stopped it from binding. Plug the drone in debate light turn on your radio click receiver and then go to the bottom before you click on bind. You need to open the ELRS setting on your radio and make sure it’s at 50 packets. Not 150 not 250 then click bind receiver in beta flight and then click bind on your radio, and it should work but that’s what stopped me that and I had to clear the binding phrase that I set up on my boxer radio was straight from happy model. It worked for me now I just need to set up odd. No info in my goggles.
You must have a separate USB adapter. It's not included with the product, so I bought it separately I have subscribed to your channel. My channel, please.
Quick question... What will happen if you reset settings? Just bought a mobula 8 Frsky receiver and CLI gives me error code when I type something and drone goes crazy when i start it. Please help
@flylion there is nothing remotely close to the settings you are making. both frsky and elrs dump file do not have these settings. you are giving misleading information.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Hi, this will be good settings for my mobula 8 uart elrs ? (I mean the pid tuning )
Just got mine, I'm stuck setting up, instructions tell me to flash the esc but Most of the other stuff comes pre set up, do I need to flash the escape with the bluejay software in order to fly or can I skip that step?
I got problem with VTX. My VTX not ready in VTX tab. So i cant change channel at all
How your s port tab look ?
Any tips for getting it into bl mode so that I can flash it? Cheers
Refer to below link
www.expresslrs.org/hardware/spi-receivers/#button-binding
Greetings, I recently started in the fpv buy the radio station master pocket radio and drone mobula 8 uart lrs, select this to bring the version 3.3.0 of elrs
I thought it would be easier, set the transmitter according to some videos set a profile and enter the basic vinding option by connecting and disconnecting the drone battery, the signal appeared on the screen of the transmitter, I put acro mode and moved the controls but nothing happened, When connecting the drone to the betaflight configurator the drone appears but not the transmitter, I have seen many tutorials and moved options, I even installed a firmware that I saw in a video, this without being very sure because it is the first time I deal with the configuration of a drone, I do not know if I have made it worse or what firmware to use to make it work, I do not know what to do, I do not know if you can give me inficacion of the steps to make it work that firmware to use what version, what motor output to use, how to put the ports, in short what is needed, I know it is a lot but I have asked everywhere and no one tells me much, I do not know what to do, I hope you can help me, I do not have much money but if you could help me I would be willing to pay you for your time, hopefully you can help me.
Just make sure your radio and your drone are both on on elrs 3.x. And what word for me was I had to erase the binding phrase that I set up in my radio. I don’t know why I just stopped it from binding. Plug the drone in debate light turn on your radio click receiver and then go to the bottom before you click on bind. You need to open the ELRS setting on your radio and make sure it’s at 50 packets. Not 150 not 250 then click bind receiver in beta flight and then click bind on your radio, and it should work
but that’s what stopped me that and I had to clear the binding phrase that I set up on my boxer radio
was straight from happy model. It worked for me now I just need to set up odd. No info in my goggles.
Thank you for this
Thanks for U reply
How did you connect it with your computer?
You must have a separate USB adapter. It's not included with the product, so I bought it separately
I have subscribed to your channel. My channel, please.
Micro usb cable, like those in older cellphones
Quick question... What will happen if you reset settings? Just bought a mobula 8 Frsky receiver and CLI gives me error code when I type something and drone goes crazy when i start it. Please help
This happened out of the box?
@thewordsofsilence4879 I subscribed you Please subscribe me
Inverse motor
Bad FC
this vid has no sound?
Yes
thanks bro
Thanks for your reply I subscribed you Please subscribe me
all of these settings are wrong, the drone does not fly with this setting, do not believe this video
This is a literal version of the BTFL file provided by HappyModel, but you can check it yourself.
@flylion there is nothing remotely close to the settings you are making. both frsky and elrs dump file do not have these settings. you are giving misleading information.