A bit of hotglue or silicone sealant (RTV) at the base of the ELRS antenna to "strain relieve" it a bit, helps to protect it without adding much weight
Hey @JoshuaBardwell the 12A AIO does in fact have issues burning. The test unit I sent you did in fact smoke itself but BetaFPV sent a replacement. The new Pico has a 20A AIO but they did not send it as a replacement. Make sure you get the newer version if considering the Pico.
I think this quad is great for just leisure flying either indoors or outdoor, but for cinematic shots I would rather go with the Cinelog20. Same O3 Air unit, 2 inch props, but much more durable, better frame and 4s batteries. Still a great review, thank you JB :)
As long as you set it to fully manual and use 10bit colors with a bit of corrective grading, the O3 performs really well and delivers strong video. Auto exposure and it's overcontrasty bias is just horrible. It's a bit of pain, but a pain worth it for having sub 250g quads recording 4k120 on an SD-Card. I did some amazing shots with my new Tiny Trainer O3 and AOS Cine25 without having to deal with strong regulations. Love it. For freestyling and fun I'll stick to my low-latency feeds, but for delivering footage... the O3 is a perfect little tool. I hope we get the Air3 Sensor in the O4 :)
Nice review Joshua. I am not sure why there are not many reviews of the mobula8 with full sized Walksnail VTX mounted using the same DJI O3 mount. I have done it, and added beeper, and it is still probably 20g lighter than the one you reviewed. The extra canopy space serves well to protect Walksnail VTX and camera against crashes, and enough room to add a ViFly ultra bright led, and still lighter than the DJI O3 version. Also saves $200 on VTX. Mobula8 is fast and probably best weight/power ratio to fly outside without being blown about by wind when flying cinematic style.
thanks for repetitive telling us about the arm angle! Yesterday i flew my cinebot the first time. i flew over a pretty dence forest and i wanted to know if my gf could see me better, when i turn off the blue light :D i accidently disarmed my quad instead of turning the lights off.. :D i fell down armed (nothing happened because i didnt moved my sticks) disarmed and armed again and saved my quad. during the fall i new exactly that i watched ur video and that i turned the max arm angle to 180 degrees. thank u so much!!
Man this couldn’t have come at a better time thank you Bardwell you are the freaking man and thanks for replying to my email helped a lot bought literally all my gear through your links and plan to sub to your Patreon once I finished my final purchases
I love mine. Just made a little edit with it ;) Flies great for its size and weight - not a freestyle machine.. Doesn't stress people out. I use the red GNB 550 HV batteries, which fit perfect. 3.5 minutes of lively flight. I didnt need to, but I put Betaflight 4.4 on, no problem. Grabbed the CLI dump from the Happymodel site and it copied over fine. I use the flywoo ND filter set (cheapest to be found), which included a clear filter so the lens is always protected. Need to replace the o3 antennas with micro vees. Its really hard to keep them out of the props, even with a cable tie stand-off and the micro vees are tougher. With Bluejay you can make the motors beep a little louder - but dont go crazy, 10% extra is fine. Waiting on some 5 blade props (gemfan d51) to make it even quieter.
I honestly fully agree with happy model making solid FCs nowadays at least when it comes to AiO. i’ve had like 4-5 over the last two years and the newer ones seem to really outlast earlier ones durability wise. that said i use them on fairly light analog whoop builds so i can’t speak to how well they’ll handle the weight of a digital vtx over an extended period. i wouldn’t be shocked if the ESCs wear out a lot sooner
If you were home when the tornado came by, you should’ve dedicated a quad to it, put it outside and then ripped it from your basement to see what it looks like while you stay safe
The problem is flywoo envisioned a frame to allow the naked to sit so prop flow would cool it - I want to make sure to get a frame optimized for that cooling feature before I get the naked.
Same as these two mention here... You just can't make an 80ish mm quad any lighter than these two. Then, you add the heavy 03 to it and it is what it is - a flying barge, bloated cow, or Big Mac devouring T-rump! LOL 😮😢 This size, in all reality, is too small to really carry such a heavy VTX & camera. Sure, they did it, but both are fragile and top heavy and over weight. A compromise. But, people will buy them, smash the F out of them, and rebuild ... It's what FPV is! 😜 It doesn't mean these will ever really fly good. 🤷💯
Really great video, as usual. I'm having a hard time deciding between the Mobula8 and the Pavo Pico. How's the noise of this one compare? And would a larger battery (850mah) be viable for either of them for longer flight times? Durability is what's making the Mobula8 attractive. Noise level, vibration dampening, and props not-in-view are what make the Pico attractive. Appreciate any feedback on this dilemma. I'm looking for something unintimidating and reliable, only considering the O3 versions.
Awesome review my man. I love flying it for its size n video quality. Would u consider flying this for a few days and see how she fairs? From a “traveling” perspective.
I can confirm flight controller catching fire on my Pavo pico just after two days of using it. Was flying it indoors and had a light crash, when I went to pick it up I found it literally on fire. At first I thought it was the battery but it turned out to be the flight controller.
I added hot glue to the base of that RX wire after my first one came with it broken off before it even was taken out of the box. I also then run it turning around the rubber column and under the bridge frame. I put another dab of hot glue holding to to frame and then pinched the end up verticle in front of the frame bridge. I also added 4 little hot glue feet mounds to the frame the batter sits in. Makes landing it not damage the frame or batter and if your hot glue feet wear down you can scrape the worn foot off with fingernail and replace with another.
for boards with those copper wire antennas. I try to run it to one of the board screws, sandwiched in between the gummies from the FC and VTX like HDzero. I know it might not be the best for range but I only do this for whoops and other small stuff where I'm not flying far anyways.
Would love to see you fly the analogue version of the mob8 your thoroughness would be refreshing. Also information of other beta flight modes worth adding ? Great as always.
Analog? What? Something for us non digi peasants? 😂 don’t hold yer breath brother 😳 Only joking, sometimes he does do an analog review but I don’t know what the near damn silence over the mob 8 is across YT is all about 🤷♂️ shogun Emperor fpv has done some great vids on it 👍🤝
@@bugsy742 haha I hear you! … it has felt very bare on the 8… I’ve gone through pretty much everyone else’s videos on it… can’t help but feel like they are never thorough enough… plus I just like JB’s style 🤞🏽
@@Hrichs my thoughts exactly it’s like just skirting over things- she looks like absolute fun, I’d like to have candy analog one with hd gyroflow like the mob 7 has! I think it has so much potential and want to know more! 😅👍🤝
Antenna is great! If it breaks you only need solder on a piece of wire to fix. Ufl connectors are fragile and are easily destroyed. Fix for them is no easy!
ive been waiting for this day. whoops with the 03. this is going to be fun. i just ordered the cinnebot 30 03 and the goggles 2. cant wait thanks for the video josh. btw i also ordered the zoro els
Great review - nice little bird if I needed another ;-)... Never understood why Betaflight couldn't implement a "save your configuration/translate it to the new firmware/reinstall the configuration" method.
Uh oh, I prefer horizon mode, if flying indoors. 😂 What did I miss? I like to be able to go flips or dives, but still be able to avoid crashing to easily inside.
Horizon mode is a liability.. It's angle mode until it just freaks out and flips on you. Learn how to do the flips properly, you'll enjoy it i promise.
@@Secret1one2Interesting. I hadn't heard about that. I have flown acro indoors, but find that a stabilized mode is easier to stop on a dime with, in tight spaces. I guess I need to up my skill level.
Honestly for freestyle you’ll need the 550mah batteries instead of 450. I was using the 450 at first but when I switched to 550 it made a big difference in the performance.
Yeah, but that'll just make this flying barge even heavier! What's the answer then? Not to try putting such a heavy VTX on such a small whoop! Sure, they've done it... It flies ok, but that doesn't mean it really, truly, isn't great carrying all that heft! For us that don't care one bit about the 4K video that I'd take with this and then it would sit on my hard drive, never to be watched again! ... lol ... I'd prefer it with a Naked Vista! It'd weigh somewhere around 55 grams + or -. But we'd still get awesome crystal clear video on our flights and reap the H U G E benefits of a whoop that weighs about 30% less! It would fly awesome! 😎🤘
The Cinelog20 O3 is also 2 inch and +4min flighttime is realistic, i use 750mah and also 660mah HV, almost not difference in flighttime, if you want longer flight, think the CL20 is a better option.
@Joshua Bardwell I was assisting someone with setting this up. The USB wasn't detected on the computer to convert to a COM port. I believe the issue may be that the USB cable lacks data transfer capability. The impulseRC_driver wasn't detected by the flight controller. I think I need to buy a USB-mini cable with data capability. Let me know if there's anything else that needs to be looked into.
I'm on a super-tight budget, so I'm looking at getting an analog version with ELRS. I'm going to get an 03 mount and bodge my Caddx Turtle V2 into it. Looks like it'll fit.
That's crazy, my analog gets 5 to 7min flying pretty good with the tattu 2s 550 v1. Must be the air unit. Fun quad though and great video! That tornado was about a mile from me as well in Farragut
@@Phoen1x883 Heat and powerusage doesnt mean much, the O3 has no active cooling, that's why it gets that hot. If it had a fan, it would be a lot cooler, would you than say it uses less power because it feels better? :p
It's already so fragile, making the 03 naked will surely cause some people to really bust this up, costing lots of money to repair! Nah, I'd rather have the huge weight savings of the Naked Vista! It will still give us crystal clear flying, great range, awesome penetration, but save a ton of weight! I could care less about the 4K video I'd take just to clog up my hard drive, never viewing it again. Lol Waste of time for me. This would fly sooooo much better at around 55g vs 80 it's at now. We'd get great flight times outta that same lipo JB barely got 2 minutes from. Sometimes we just need to face facts. This is really, truly, too small of a craft to carry such a heavy VTX. Sure, they did it, but that doesn't mean it's great ... It's just Yeh! Shaving off approx. 25 grams could definitely make it great! And, we don't lose much! 🤔🧐👍
I Have a Request Joshua, Can you maybe make a playlist with like these types of drones that are small and use like DJI 03 Air Units, even for possible ones in the future that you may review?
I want to see an comparison on the new micros and which to buy, Pavo Pico, Mobula O3, Flywoo O3, maybee put the Rotor Riot Walksnal together. So many Options for FPV People…
Amazing flying and review, Joshua! Pretty nice footage! 😃 I don't remember seeing solar panels on your roof before... How long did you put it? They're going to install 10 sheets (boards?) here in about a month. Anyway, stay safe there with your family! 🖖😊
I picked up the analog version of the Mobula8. I really like the quad, except the analog version has an SPI XLRS receiver. I had to flash it to 4.4 to get the receiver to bind. I should have bought the version without a camera and transmitter and added an analog VTX. I have yet to make the jump to digital.
Slightly off-topic question, but that plug that goes from the 03 air unit where the harness attaches to the board. What would I do if I broke one of those off the board? Do I need to solder all of those little Pinz back on? Can I use electrical conductive glue? Or can the plastic harness itself just be glued down and is that enough to make contact with the Pins?
I have the HDZERO version and it rips! On thing tho. The model match on mine would not update on the FC when I turned it on and off at the radio, whether the quad was powered or not. There is a model match check box on a tab under the ELRS page that pops up when you have your quad in wifi mode. I learned that from one of the guys on the ELRS discord.
Bro, it's ultra heavy for an 85mm whoop. Remember, Mr. Shutterbug made an 85mm whoop that weighs 39 grams... This is over DOUBLE that! It's a very fragile flying barge...a bloated cow! But, you go ahead and try flying those things you asked about... See how it turns out. 🤷🤦 At best... It's good for flying slow and getting 4k video. That's about it. You want a much better flying DJI equipped whoop? Build your own 85mm but use a Naked Vista instead... Probably save about 25 grams and improve flight characteristics to so much better it'll blow yer mind! Seriously! 🤯💯
I've been enjoying this quad for a couple months now. First thing that needed changing was the 03 wiring had to be moved under he aio so the props wouldn't strike the connector on a hard crash. The next thing that happened was the antenna's found their way into the props. and needed to be replaced and fixed to the fame to that was impossible. I really with there was a 3S aio I could fit inside it. Overall I think this one is a win and I'm going to add the flywoo naked 03 kit to it soon.
I’ve just been looking at the pavo pico as I’d like a small drone I could fly indoors as well as outside and would work with the DJI fpv controller and goggles 2 I got with DJI avata when there’s no wind. Would you say this one is better ?
Patrons get 24 hr early access and ad-free videos! Join up at: bit.ly/2Ep5Sia
This Mobula8 or the AcroBee75? the 0804 motors w/12000kv on the acrobee seem to be enough right?
A bit of hotglue or silicone sealant (RTV) at the base of the ELRS antenna to "strain relieve" it a bit, helps to protect it without adding much weight
Hey @JoshuaBardwell the 12A AIO does in fact have issues burning. The test unit I sent you did in fact smoke itself but BetaFPV sent a replacement. The new Pico has a 20A AIO but they did not send it as a replacement. Make sure you get the newer version if considering the Pico.
Josh really thinks nobody wants to watch the spi vs serial video. Some of us have no idea what spi even means, those videos are needed
I do
I think this quad is great for just leisure flying either indoors or outdoor, but for cinematic shots I would rather go with the Cinelog20. Same O3 Air unit, 2 inch props, but much more durable, better frame and 4s batteries. Still a great review, thank you JB :)
I'm with you on that, but i fly the CineOn C20 V2.. even more durable.
Dat BetaFPV Mobula 7 is something new :D
As long as you set it to fully manual and use 10bit colors with a bit of corrective grading, the O3 performs really well and delivers strong video. Auto exposure and it's overcontrasty bias is just horrible. It's a bit of pain, but a pain worth it for having sub 250g quads recording 4k120 on an SD-Card. I did some amazing shots with my new Tiny Trainer O3 and AOS Cine25 without having to deal with strong regulations. Love it.
For freestyling and fun I'll stick to my low-latency feeds, but for delivering footage... the O3 is a perfect little tool. I hope we get the Air3 Sensor in the O4 :)
Nice review Joshua. I am not sure why there are not many reviews of the mobula8 with full sized Walksnail VTX mounted using the same DJI O3 mount. I have done it, and added beeper, and it is still probably 20g lighter than the one you reviewed. The extra canopy space serves well to protect Walksnail VTX and camera against crashes, and enough room to add a ViFly ultra bright led, and still lighter than the DJI O3 version. Also saves $200 on VTX. Mobula8 is fast and probably best weight/power ratio to fly outside without being blown about by wind when flying cinematic style.
Looks great. I do prefer the HDzero or walksnail one as they are both nearly half the weight of the DJI mobula8. But nothing beats the DJI quality.
thanks for repetitive telling us about the arm angle! Yesterday i flew my cinebot the first time. i flew over a pretty dence forest and i wanted to know if my gf could see me better, when i turn off the blue light :D i accidently disarmed my quad instead of turning the lights off.. :D i fell down armed (nothing happened because i didnt moved my sticks) disarmed and armed again and saved my quad. during the fall i new exactly that i watched ur video and that i turned the max arm angle to 180 degrees. thank u so much!!
Man this couldn’t have come at a better time thank you Bardwell you are the freaking man and thanks for replying to my email helped a lot bought literally all my gear through your links and plan to sub to your Patreon once I finished my final purchases
glad you sort of dodged the tornado, hope no one got hurt.
it's looks pretty good.
fine for many
I love mine. Just made a little edit with it ;)
Flies great for its size and weight - not a freestyle machine.. Doesn't stress people out.
I use the red GNB 550 HV batteries, which fit perfect. 3.5 minutes of lively flight.
I didnt need to, but I put Betaflight 4.4 on, no problem.
Grabbed the CLI dump from the Happymodel site and it copied over fine.
I use the flywoo ND filter set (cheapest to be found), which included a clear filter so the lens is always protected.
Need to replace the o3 antennas with micro vees.
Its really hard to keep them out of the props, even with a cable tie stand-off and the micro vees are tougher.
With Bluejay you can make the motors beep a little louder - but dont go crazy, 10% extra is fine.
Waiting on some 5 blade props (gemfan d51) to make it even quieter.
That's some great Info 👍
have tried the quieter props. Big difference in volume! But the prop wash is a little more prominent if you don't nail it.
I honestly fully agree with happy model making solid FCs nowadays at least when it comes to AiO. i’ve had like 4-5 over the last two years and the newer ones seem to really outlast earlier ones durability wise. that said i use them on fairly light analog whoop builds so i can’t speak to how well they’ll handle the weight of a digital vtx over an extended period. i wouldn’t be shocked if the ESCs wear out a lot sooner
If you were home when the tornado came by, you should’ve dedicated a quad to it, put it outside and then ripped it from your basement to see what it looks like while you stay safe
My fam moved up to Ohio from Nashville (couple years now). I don’t miss the big storms and tornadoes.
You don't know how much I like the beta fpv mobula 7 0:45
I came to find this comment!!!
❤
But seriously the 75pro is the best frame BetaFPV have come out with! I absolutely love it!!!
@lemonsquareFPV I love it too I have it it's really something
Would be cool to see what a flywoo lite o3 on this would fly.
I could see it being done.
You mean a DJI O3 naked 😃 you don’t need Flywoo expensive kit. There are STL over there
I've wondered the same thing!
The problem is flywoo envisioned a frame to allow the naked to sit so prop flow would cool it - I want to make sure to get a frame optimized for that cooling feature before I get the naked.
Same as these two mention here... You just can't make an 80ish mm quad any lighter than these two. Then, you add the heavy 03 to it and it is what it is - a flying barge, bloated cow, or Big Mac devouring T-rump! LOL 😮😢
This size, in all reality, is too small to really carry such a heavy VTX & camera. Sure, they did it, but both are fragile and top heavy and over weight. A compromise. But, people will buy them, smash the F out of them, and rebuild ... It's what FPV is! 😜
It doesn't mean these will ever really fly good. 🤷💯
I just looked up the weight of the mobula 8 Versions.
The O3 is 80g and the Walksnail is 48g.
That's an insane difference.
Ive got analog version with mounted thumb pro-w. Plenty of power and up to 6min flight time. I love it, got some footage on my channel.
The GNB 530 2s fit the Mob 8 perfectly.
BARDWELL YOU THE MAN YO!!!! 👍🏻
That thing would be perfect with the Flywoo Naked O3 Lite\Ultra Air unit!
It'll be as fragile as glass! Lol ...
And costs a bundle to repair at first crash. 😢
Really great video, as usual. I'm having a hard time deciding between the Mobula8 and the Pavo Pico. How's the noise of this one compare? And would a larger battery (850mah) be viable for either of them for longer flight times? Durability is what's making the Mobula8 attractive. Noise level, vibration dampening, and props not-in-view are what make the Pico attractive. Appreciate any feedback on this dilemma. I'm looking for something unintimidating and reliable, only considering the O3 versions.
Buy this or the Pavo Pico (34g) but get the Flywoo Naked O3 Ultra Air unit (18g). (The Pavo Pico gets reduced from 71g to 53g).
Awesome review my man. I love flying it for its size n video quality. Would u consider flying this for a few days and see how she fairs? From a “traveling” perspective.
I can confirm flight controller catching fire on my Pavo pico just after two days of using it.
Was flying it indoors and had a light crash, when I went to pick it up I found it literally on fire.
At first I thought it was the battery but it turned out to be the flight controller.
Just got my replacement from them smh
@@willbrown8928 Good to know. So far I have contacted the retailer and waiting for their response.
Bummer!
DJI -- the drone that US tech envies.
I added hot glue to the base of that RX wire after my first one came with it broken off before it even was taken out of the box. I also then run it turning around the rubber column and under the bridge frame. I put another dab of hot glue holding to to frame and then pinched the end up verticle in front of the frame bridge.
I also added 4 little hot glue feet mounds to the frame the batter sits in. Makes landing it not damage the frame or batter and if your hot glue feet wear down you can scrape the worn foot off with fingernail and replace with another.
am i the only one who was more impressed with jbs face camera was able to catch that mosquito?
for boards with those copper wire antennas. I try to run it to one of the board screws, sandwiched in between the gummies from the FC and VTX like HDzero. I know it might not be the best for range but I only do this for whoops and other small stuff where I'm not flying far anyways.
Absolutely happy with Happymodel's SPI-receiver. It's great with today's betaflight firmware. So I have free uart needed.
I need this in my life so badly
Would love to see you fly the analogue version of the mob8 your thoroughness would be refreshing. Also information of other beta flight modes worth adding ? Great as always.
Analog? What? Something for us non digi peasants? 😂 don’t hold yer breath brother 😳
Only joking, sometimes he does do an analog review but I don’t know what the near damn silence over the mob 8 is across YT is all about 🤷♂️ shogun Emperor fpv has done some great vids on it 👍🤝
@@bugsy742 haha I hear you! … it has felt very bare on the 8… I’ve gone through pretty much everyone else’s videos on it… can’t help but feel like they are never thorough enough… plus I just like JB’s style 🤞🏽
@@Hrichs my thoughts exactly it’s like just skirting over things- she looks like absolute fun, I’d like to have candy analog one with hd gyroflow like the mob 7 has! I think it has so much potential and want to know more! 😅👍🤝
Antenna is great! If it breaks you only need solder on a piece of wire to fix. Ufl connectors are fragile and are easily destroyed. Fix for them is no easy!
I've been thoroughly enjoying my 6S Cinelog35v2.
I have parts to build an 85 with dji equipment , I’ve been putting it off but I might get after it tonight ! Thanks Jb 😊
I've had it in my cart for a week. Still undecided, but very tempted.
Many thanks for the numerous, instructive video lessons! 🙏🏻 I have learned a lot from you! 👍🏻🤘🏻
Good stuff as always. Any plan on reviewing the much heavier 4S CineLog20 O3? It looks like the flavour of the month for 2'' O3 cinewhoops.
I’m looking to buy it, nice to see you review it👍
ive been waiting for this day. whoops with the 03. this is going to be fun. i just ordered the cinnebot 30 03 and the goggles 2. cant wait thanks for the video josh. btw i also ordered the zoro els
What a save!
Great review - nice little bird if I needed another ;-)...
Never understood why Betaflight couldn't implement a "save your configuration/translate it to the new firmware/reinstall the configuration" method.
Man I love your narration JB ✊🤝
That day came Joshua after binging your videos, i finaly subbed to you today ( i realised i hadnt done so far :P )
I was under the impression that you crash on the 🌳 🏡 🌲 🎄 🌴 😅😂😅😂😊
Uh oh, I prefer horizon mode, if flying indoors. 😂 What did I miss?
I like to be able to go flips or dives, but still be able to avoid crashing to easily inside.
Horizon mode is a liability.. It's angle mode until it just freaks out and flips on you.
Learn how to do the flips properly, you'll enjoy it i promise.
@@Secret1one2Interesting. I hadn't heard about that. I have flown acro indoors, but find that a stabilized mode is easier to stop on a dime with, in tight spaces.
I guess I need to up my skill level.
@@SunriseWaterMediamost do fly stabilized mode with whoops indoors.
Honestly for freestyle you’ll need the 550mah batteries instead of 450. I was using the 450 at first but when I switched to 550 it made a big difference in the performance.
Yeah, but that'll just make this flying barge even heavier!
What's the answer then?
Not to try putting such a heavy VTX on such a small whoop! Sure, they've done it... It flies ok, but that doesn't mean it really, truly, isn't great carrying all that heft!
For us that don't care one bit about the 4K video that I'd take with this and then it would sit on my hard drive, never to be watched again! ... lol ... I'd prefer it with a Naked Vista! It'd weigh somewhere around 55 grams + or -. But we'd still get awesome crystal clear video on our flights and reap the H U G E benefits of a whoop that weighs about 30% less! It would fly awesome! 😎🤘
I purchased it and love it!! DJI 03.
OMG, your house is the same with a map in Liffoff Sim @@
Just picked up a Pavo pico. Can’t wait
Hi Bardwell, we need a video of all the daily quads you fly and what batts you use and what chargers etc.
Thanks!!
2:30 flight time! Might as well fly a 3 inch cinewhoop with gopro mini 4:30 flight time and better video quality
JB NEEDS A NEW 03 FOR HIS ULTIMATE JB FREESTYLE BUILD. A whole 15 seconds longer. Took the top of that battery.. higher kv.
BetaFPV Mobula 7 ??
Awesome review Jb . 🙌
The Cinelog20 O3 is also 2 inch and +4min flighttime is realistic, i use 750mah and also 660mah HV, almost not difference in flighttime, if you want longer flight, think the CL20 is a better option.
got one it flys really good
made one of these with the Caddx vista, works great!
@Joshua Bardwell I was assisting someone with setting this up. The USB wasn't detected on the computer to convert to a COM port. I believe the issue may be that the USB cable lacks data transfer capability. The impulseRC_driver wasn't detected by the flight controller. I think I need to buy a USB-mini cable with data capability. Let me know if there's anything else that needs to be looked into.
everytime I watch an fpv I feel like i am a fly hahaha
its very very usefl about model much thing .thank you very much
Very minor point, doesn't the Pavo Pico have 45mm props? That probably makes quite a difference too.
Take my money 💵 I’m want this 🤑
I'm on a super-tight budget, so I'm looking at getting an analog version with ELRS. I'm going to get an 03 mount and bodge my Caddx Turtle V2 into it. Looks like it'll fit.
Great review - nice little bird if I needed another ;-)...
I can’t wait to see you review the acrobee03 on that 75mm frame and compare.
Lmao!!! "If you dont know what horizon mode is, GOOD!"
I somehow bought a Action2 you owned.
I get it to work!!
Want to know how???
Oh yeah, your are on it for about 25sec.
That's crazy, my analog gets 5 to 7min flying pretty good with the tattu 2s 550 v1. Must be the air unit.
Fun quad though and great video!
That tornado was about a mile from me as well in Farragut
If you want to know whether the O3 uses a lot of power, try holding one after it's been powered up for a minute. It's pretty obvious.
@@Phoen1x883 Heat and powerusage doesnt mean much, the O3 has no active cooling, that's why it gets that hot. If it had a fan, it would be a lot cooler, would you than say it uses less power because it feels better? :p
The o3 version is 80g while the analog is around 46g.
Now this would probably fly quite a bit better and longer if you modify the O3 AU with the flywoo naked kit for it. Maybe worth a test?
It's already so fragile, making the 03 naked will surely cause some people to really bust this up, costing lots of money to repair!
Nah, I'd rather have the huge weight savings of the Naked Vista!
It will still give us crystal clear flying, great range, awesome penetration, but save a ton of weight! I could care less about the 4K video I'd take just to clog up my hard drive, never viewing it again. Lol Waste of time for me.
This would fly sooooo much better at around 55g vs 80 it's at now. We'd get great flight times outta that same lipo JB barely got 2 minutes from.
Sometimes we just need to face facts. This is really, truly, too small of a craft to carry such a heavy VTX. Sure, they did it, but that doesn't mean it's great ... It's just Yeh! Shaving off approx. 25 grams could definitely make it great! And, we don't lose much! 🤔🧐👍
I Have a Request Joshua, Can you maybe make a playlist with like these types of drones that are small and use like DJI 03 Air Units, even for possible ones in the future that you may review?
I want to see an comparison on the new micros and which to buy, Pavo Pico, Mobula O3, Flywoo O3, maybee put the Rotor Riot Walksnal together. So many Options for FPV People…
Wonder how the acrobee75 blv4 hd 03 flies. You knew someone was going to do it.
I flashed BlueJay just so i can have the motors play Star Wars every time i plug in a battery 😅
Betafpv Mobula7
I thought the same thing! More like Betafpv Meteor75 Pro?
Amazing flying and review, Joshua! Pretty nice footage! 😃
I don't remember seeing solar panels on your roof before... How long did you put it? They're going to install 10 sheets (boards?) here in about a month.
Anyway, stay safe there with your family! 🖖😊
I picked up the analog version of the Mobula8. I really like the quad, except the analog version has an SPI XLRS receiver. I had to flash it to 4.4 to get the receiver to bind. I should have bought the version without a camera and transmitter and added an analog VTX. I have yet to make the jump to digital.
This is better than betafpv pavopico , I have some issues with fc from betafpv - that sucks
for those 75 whoop would be naked o3 from flywoo
Shoot there are a few folks with the 03 stripped down on a 2s 65mm!
why not secure antenna solder point with UV solder mask. In case this could be scraped
next quadcopter on my wish list. where to get money for all these cool toys. If anyone's planning a bank robbery, don't forget about me ! 🐢
Slightly off-topic question, but that plug that goes from the 03 air unit where the harness attaches to the board. What would I do if I broke one of those off the board? Do I need to solder all of those little Pinz back on? Can I use electrical conductive glue? Or can the plastic harness itself just be glued down and is that enough to make contact with the Pins?
Got mine last week but I'm still waiting for the batteries. The 2s 550 mAh Tattu lipo's seem to be out of stock everywhere, at least in Europe.
I have the HDZERO version and it rips! On thing tho. The model match on mine would not update on the FC when I turned it on and off at the radio, whether the quad was powered or not. There is a model match check box on a tab under the ELRS page that pops up when you have your quad in wifi mode. I learned that from one of the guys on the ELRS discord.
Good ole ANALOG2!
we had a tornado roll by a few years ago and it riped of the bark from some trees
bro really made the dji avata lol
:47 - BetaFPV Mobula 7? The HappyModel Mobula 7 I have is junk but absolutely Love my BetaFPV Meteor75
I have the HDZero version and it rips. Probably due to the lighter weight compared to the 03 version
What’s wrong with horizon mode?
Would this be good for a course in your garage or apartment and then some stealth dives in like a downtown ?
Bro, it's ultra heavy for an 85mm whoop. Remember, Mr. Shutterbug made an 85mm whoop that weighs 39 grams... This is over DOUBLE that! It's a very fragile flying barge...a bloated cow!
But, you go ahead and try flying those things you asked about... See how it turns out. 🤷🤦
At best... It's good for flying slow and getting 4k video. That's about it. You want a much better flying DJI equipped whoop? Build your own 85mm but use a Naked Vista instead... Probably save about 25 grams and improve flight characteristics to so much better it'll blow yer mind! Seriously! 🤯💯
I've been enjoying this quad for a couple months now. First thing that needed changing was the 03 wiring had to be moved under he aio so the props wouldn't strike the connector on a hard crash. The next thing that happened was the antenna's found their way into the props. and needed to be replaced and fixed to the fame to that was impossible. I really with there was a 3S aio I could fit inside it. Overall I think this one is a win and I'm going to add the flywoo naked 03 kit to it soon.
Radiomaster pocket 🥺
I’ve just been looking at the pavo pico as I’d like a small drone I could fly indoors as well as outside and would work with the DJI fpv controller and goggles 2 I got with DJI avata when there’s no wind. Would you say this one is better ?
Out of stock everywhere. I guess these are discontinued?
bro... I just love you and your content 😘
Офигенное видео
it be cool if you could do a review of geprc cinelog 20 with o3, thinking it maybe my next quad