Apparently, you can assign the VTX power output to a switch on an OpenTX/EdgeTX transmitter. I run my Mob8 with a 2S Tattu 450 HV; it fits perfectly. This thing is a little beast - the factory tune makes it fly like its on rails. I put a Caddx Baby Ratel V2 on mine. I cut the back off the canopy and routed the dipole out through the rear hoops. I've got another Mob8 on order; I'm going to mount a Caddx Turtle V2 to it using the O3 frame. Probably fly that one with 3S Tattu 450s.
Nice flying and review, as always. I've had the Crossfire version of this one for a while now and I must say that it is a joy to fly. That little guy rips.
A very nice setup for a not so tiny whoop. The best thing about it is you can fly it in the house and close to people since it has duct prop guards and you can freestyle all over the park. Thanks Greg!!
Mobula 7 and 6 and now the 8. They are all good but the 8 is a nice one. The batts are cheap. They made it high voltage so more flight time and more power. The DJI 03 HD version test soon! Thanks Ray!! 🍺🍺
the size of these boxed goggles.. wow xD man im waiting for mine today. canada post tracking reads "out for delivery" status im excited i bought two stubbys with it
It's a nice flying rig. I fly with GNB 350 and 380, there new and I'm getting 4 min to 5 min flight times pending on now I fly. Thinks for the ride along, great review sir.
Hello, as always, great review 💚 From 2024 in my country, the regulations are so strict that an ordinary citizen will not be able to fly a drone legally. The procedures are implemented by the Euro Parliament..... Total madness.
Thanks Keith!! Happymodel knows what they are doing with the mobula series. I flew the 7 the 6 and now the 8 and all of them are very good. I like this one the best since it is elrs and 2s. Just enough power. :)
sweet kwad brother pete! i know this has to be a nice one cause i put the innards from my 2 moby6 whoops into a 75mm frame and installed larger(40mm?) triblades and man its a much better whoop! even purposly flew em on a very windy day to see how they handled it...got blown around a bit but they did well considering.....
Flying along with that pickup truck looked like fun! :-) Think I've seen (much) better/clearer analog video than this. BTW: what happened to the onboard HD recording possiblility of the original Mobula 8 HD?
The HD version is a totally different quad which I'll review as well soon. The caddx ant is not a very high quality camera. It is meant to keep the cost low for tiny quads. But for the overall price, it is a very good deal.
how the frick do you get your footage ??? im tryna convert my Avi data type into mp4 on various websites, even in the vlc meedia player but there s always some kind of error. please help me out !!!
Yes you can. You will need a charger that charges HV batts. Try a ToolkitRC charger.www.google.com/search?q=toolkitrc+charger&rlz=1C1CHBF_enUS846US846&oq=toolkitrc+charger&gs_lcrp=EgZjaHJvbWUyCQgAEEUYORiABDIHCAEQABiABDIICAIQABgWGB4yCAgDEAAYFhgeMggIBBAAGBYYHjIICAUQABgWGB4yCAgGEAAYFhgeMggIBxAAGBYYHjIICAgQABgWGB4yCAgJEAAYFhge0gEKMTI4NDFqMWoxNagCALACAA&sourceid=chrome&ie=UTF-8
Hay pete.,why won't you do a video review on the walkera t210 mini? It would be greatly appreciated pete.,I mean, it's a great little quad! Can you please do that for us Pete? Your fans will be waiting for that review, you won't regret it, I promise you
are you sure your mob and boxer on the same FW? you need to check the FW first. if your mob FW is 3. then your boxer must 3. too. just update both FW (firmware)
Honestly, I figured it out. I had to just clear the binding phrase on my radio, and on the mob eight and it binded. Now all of a sudden, I’m getting shitty range. I don’t know what happened.
saludos gracias por el video me ha sido útil para aprender algunas características del dron, tengo el mobula 8 versión uart lrs viene con la versión 3.3.0 al igual que mi radio master pocket, acabo de empezar en este hobby tengo una semana con el dron pero no he podido hacer q se muevan los motores, configure mi emisora y conecte el drone, aparece la señal en la pantalla y dice que hay telemetría, pero el dron no se ha movido, he intentado conectar el dron al betaflight y no hay problema pero la emisora no aparece conectada no lo he podido conseguir, siguiendo algunos videos actualice el firmware poniendo la placa crazybeeft 4SX1280 version 4.3.1 pero aun no sucede nada, he conectado el control y el dron por wifi y las versiones de elrs coinciden así que no se que pueda ser, ojala pudieras responderme y guiarme un poco no se que hacer, le he escrito a muchas personas pero no me responden y los que lo han echo me dicen que pruebe otro cable u otro pc, no se que hacer, espero me puedas guiar un poco en este problema.
After binding is complete, on your pocket radio, long press the system button. Scroll to the ExpressLRS and enter. Scroll down to the fourth line where it says Model Match. If it is on, turn it off. If it is off, turn it on. See if this solves the issue.
Apparently, you can assign the VTX power output to a switch on an OpenTX/EdgeTX transmitter. I run my Mob8 with a 2S Tattu 450 HV; it fits perfectly. This thing is a little beast - the factory tune makes it fly like its on rails. I put a Caddx Baby Ratel V2 on mine. I cut the back off the canopy and routed the dipole out through the rear hoops. I've got another Mob8 on order; I'm going to mount a Caddx Turtle V2 to it using the O3 frame. Probably fly that one with 3S Tattu 450s.
For a beginner or an intermediate, it's a nice thing. Great review!👍
Very user friendly due to the ducted prop guards and not that noisy so you can fly in the house. Great for windy days :) Thanks!
Nice flying and review, as always. I've had the Crossfire version of this one for a while now and I must say that it is a joy to fly. That little guy rips.
Yes it is! Much easier than a 5” to take along. Especially with the Pocket radio. A backpack is too big :) lol
This is a nice little quad like you said Pete, good job man.
A very nice setup for a not so tiny whoop. The best thing about it is you can fly it in the house and close to people since it has duct prop guards and you can freestyle all over the park. Thanks Greg!!
Great review Pete. I’m liking the whoop👍🙏👍🙏
Mobula 7 and 6 and now the 8. They are all good but the 8 is a nice one. The batts are cheap. They made it high voltage so more flight time and more power. The DJI 03 HD version test soon! Thanks Ray!! 🍺🍺
Nice review. Got one but I having problems binding it. I am just learning.
the size of these boxed goggles.. wow xD man im waiting for mine today. canada post tracking reads "out for delivery" status im excited i bought two stubbys with it
It's a nice flying rig. I fly with GNB 350 and 380, there new and I'm getting 4 min to 5 min flight times pending on now I fly. Thinks for the ride along, great review sir.
Thanks! That's some nice flight times!! 👍👍
First video I have watched on hoop drones.
I liked the image quality very much, so I was curious about all your antennas.❤
I took my Cam3 Split HD camera from my mobi6 n put into my Mobi8, the HD is Kool! Small upgrade that I'm happy with.
Way to go bro! That sounds like a great idea.
Hello, as always, great review 💚
From 2024
in my country, the regulations are so strict that an ordinary citizen will not be able to fly a drone legally.
The procedures are implemented by the Euro Parliament.....
Total madness.
Nice 👍 They've certainly packed a lot onto that fc board. If it flies as well as my mobula 6 it's going to be worth buying. Thanks for the review 👍
Thanks Keith!! Happymodel knows what they are doing with the mobula series. I flew the 7 the 6 and now the 8 and all of them are very good. I like this one the best since it is elrs and 2s. Just enough power. :)
@@RCEscape на 8 нормальнотпо дому летать? И какое время работы от аккумулятора? Кстати, пробовали на 1s? Сколько летает на 1s?
I've got mine. Boy it's got some power for sure!
Enjoy!
@@RCEscape rank roo (Scooby-Doo voice)
Great video 😊
hello Is it possible to solder the TBS RX yourself? Is there a pin map? Or better to buy already soldered?
Link to fc in video description.
sweet kwad brother pete!
i know this has to be a nice one cause i put the innards from my 2 moby6 whoops into a 75mm frame and installed larger(40mm?) triblades and man its a much better whoop!
even purposly flew em on a very windy day to see how they handled it...got blown around a bit but they did well considering.....
Tiny whoops can have bigger frames as seen with the king kong ET series but now they make it so simple. SPI ELRS is awesome. Thanks Birdman!
Thanku for review... when using flysky receiver ..do u bind using cli command? Thanku
Which band allows, the mob 8 to have the highest VTX power?
Flying along with that pickup truck looked like fun! :-)
Think I've seen (much) better/clearer analog video than this. BTW: what happened to the onboard HD recording possiblility of the original Mobula 8 HD?
The HD version is a totally different quad which I'll review as well soon. The caddx ant is not a very high quality camera. It is meant to keep the cost low for tiny quads. But for the overall price, it is a very good deal.
My buzzer pads have holes running through them... is that normal?
Some how I felt the video quality from your front yard seems to be better than from the park?
I used the fatshark to record it at the house but forgot to bring it for the park so it was from the headplay goggles which has a bit of stretch.
hi. mobula8 or meteor85?
from what I've read and heard mobula is a better product
👍👍👍
How are you entering OSD? Tried every configuration of the gimbals and it won’t work.
Yaw left. Pitch forward
how the frick do you get your footage ??? im tryna convert my Avi data type into mp4 on various websites, even in the vlc meedia player but there s always some kind of error.
please help me out !!!
I simply import it to my laptop and into the windows movie maker.
Can I use the 7.6v GNB 539 mah battery for this but what charger do I use?
Yes you can. You will need a charger that charges HV batts. Try a ToolkitRC charger.www.google.com/search?q=toolkitrc+charger&rlz=1C1CHBF_enUS846US846&oq=toolkitrc+charger&gs_lcrp=EgZjaHJvbWUyCQgAEEUYORiABDIHCAEQABiABDIICAIQABgWGB4yCAgDEAAYFhgeMggIBBAAGBYYHjIICAUQABgWGB4yCAgGEAAYFhgeMggIBxAAGBYYHjIICAgQABgWGB4yCAgJEAAYFhge0gEKMTI4NDFqMWoxNagCALACAA&sourceid=chrome&ie=UTF-8
@@RCEscape this is confusing
Tô pensando em comprar um amigo , tenho o controla comando 8 Iflight ERLS , ele parece muito ágil e fácil de manobra . Valeu pelo vídeo sucesso .
I want one so bad but theyre sold out everywhere!
use the link in the description.
Hay pete.,why won't you do a video review on the walkera t210 mini? It would be greatly appreciated pete.,I mean, it's a great little quad! Can you please do that for us Pete? Your fans will be waiting for that review, you won't regret it, I promise you
I really would if someone sent a sample to test.
Mob 8 elrs
Boxer elrs. All on elrs 3.x
Cannot get it to bind for the life of me so frustrating still haven’t been able to fly it
maybe try setting up a bind phrase?
are you sure your mob and boxer on the same FW?
you need to check the FW first. if your mob FW is 3. then your boxer must 3. too.
just update both FW (firmware)
Honestly, I figured it out. I had to just clear the binding phrase on my radio, and on the mob eight and it binded. Now all of a sudden, I’m getting shitty range. I don’t know what happened.
@LoVeAmBiEnT maybe change the output power in the elrs script
А где заказать и сколько стоит?
product link in the video description.
saludos gracias por el video me ha sido útil para aprender algunas características del dron, tengo el mobula 8 versión uart lrs viene con la versión 3.3.0 al igual que mi radio master pocket, acabo de empezar en este hobby tengo una semana con el dron pero no he podido hacer q se muevan los motores, configure mi emisora y conecte el drone, aparece la señal en la pantalla y dice que hay telemetría, pero el dron no se ha movido, he intentado conectar el dron al betaflight y no hay problema pero la emisora no aparece conectada no lo he podido conseguir, siguiendo algunos videos actualice el firmware poniendo la placa crazybeeft 4SX1280 version 4.3.1 pero aun no sucede nada, he conectado el control y el dron por wifi y las versiones de elrs coinciden así que no se que pueda ser, ojala pudieras responderme y guiarme un poco no se que hacer, le he escrito a muchas personas pero no me responden y los que lo han echo me dicen que pruebe otro cable u otro pc, no se que hacer, espero me puedas guiar un poco en este problema.
After binding is complete, on your pocket radio, long press the system button. Scroll to the ExpressLRS and enter.
Scroll down to the fourth line where it says Model Match. If it is on, turn it off. If it is off, turn it on. See if this solves the issue.
Why do these manufacturers keep using these shitty antennas?