How to use Meguiar's Hybrid Ceramic Wax for AMAZING Results - DO THIS NEW METHOD!!!
HTML-код
- Опубликовано: 30 июн 2020
- POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_two_kit
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
This stuff has impressed me over the past week, so decided to make a video on it showing how I applied it to my F250. (NOT sponsored in any way) Bought this at Advance
You guys need to try this method of applying the Mequiar's Hybrid Ceramic Wax to your vehicle.
GET IT HERE:
bit.ly/MEGUIARShybrid
GET YOUR POWERSTROKE PARTS HERE:
bit.ly/606whp
Follow my instagram:
bit.ly/COREYINSTAGRAM
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks - Авто/Мото
Pre wash with hose/power washer.
4:50-6:30
8:40 best way use.
GOD'S WORK OP. Thank you
No. Spray foam, let it lift the dirt, then gently spray off with warm water.
Then spray with shampoo, wash and rinse with warm water.
Dry, spray the stuff on, dry.
Then spray again whole dry and buff.
Bought it for my detailer I told him to follow your step's and it worked flawless thanks
Applied it in the way u demonstrated on my Mazda 3 2023, and I am very very satisfied with the results, also saved the product. Thanks a lot for helping, appreciate it
I was impressed by meguiars hybrid ceramic wash/wax and their 2 sided hybrid wash mitt. Then went and bought their ceramic clay, liquid wax, spray wax and detailer. As my first experience with "ceramic" I am very impressed.
I think you applied it the correct way. I have seen one other guy do the same and he tested it several times and applying it the way you did had way better results
Thanks for the tip buddy. Can't wait to try it when the weather gets better .
I agree with your process. Apex Detail did a video stating the same thing. The spray on wet and rinse off method does not allow the product enough time to bond evenly to the paint. Thanks for the video. Your truck looks awesome!
Meguiar’s should sponsor you. I’m so glad you made this video.
This has amazing results. People try this you will be star struck when you try this.
Loved the video, I've checked out many videos of how to apply the wax, the way the product is applied from Meguiar's instructions is great and quick, but your method is also great and a bit more time consuming but the results last longer. Thanks for the video, oh, nice truck,
Did the same thing ... saw it in PepBoys and figured I'd try it. I won't lie, after I bought it I had second thoughts about using this on my new car so I tried it on my wife's daily. Applied it like you did for a base coat and then hosed it down and applied over beaded water per Meguiar's directions. The surface does need to be buffed, but it puts a beautiful shine on the paint. I'm hoping it builds with each application and lasts.
I have a bottle of this stuff, found this video while researching reviews, great video, I like that you explained your application, and that it varied from what Meg's recommended. I'm going to go with you're application method, the TC application method. Thanks bruh. 👍🏽
howd it go?
This is an excellent way to apply; you can also spray on a just-washed (but wet) vehicle and dry (constantly changing towels) which does the same thing, as the towel quickly gets damp it becomes the applicator. Have also seen it applied with a damp applicator/sponge, like traditional wax, and then buffed off. Great job!!
I followed your instructions....my red Dodge is off the hook! This stuff is by far the best!! Thanks again.
The shine is gorgeous, great video.
I like your process, trying this on my car today! Many people complain that the recommended Meguiar's process leaves streaks, so I'm going with your process on my Black BMW! I usually use UPGP, so the whole thing makes me nervous, but I want to try it!
Awesome video. Thanks for sharing 👌🏾😎👏🏾 truck looks damn good. Just recently picked up a bottle of this stuff. Can't wait to try it out now after seeing this.
I'm going to clay bar my truck and then apply this stuff. Looking forward to seeing the results. Thanks for the video.
oh man, I just did my car with this and saw your video - so wished I had seen this first. I"m going to do my buddys black Camaro exactly like you did your truck - thanks for the video - keep up the good work!
I bought a new vehicle and applied this ceramic wax the way you showed us. I am so happy with the result and the product.
Sick video, man! Thanks for the content
I tried the Maguires ceramic wax on my Porsche Panamera GTX exactly the way you did it on your truck. It works works perfectly. Very good video. I’m impressed.👍
I applied it the same way. Results are amazing. Maintenance washes are so easy. I also used it on rims and tires. Fantastic results. Break dust just Flys off
Question, do i get water first than put this or?
@@ermal6157 YES! otherwise you will have a bad time with streaking!
I have a car that's" silver ingot" and this maguire hybrid ceramic wax gives it an amazing shine! I've tried several other products and it's by far the best for shine. Silver is hard to get a decent shine out of but this works.
I got a black car and This video helped me so much. Your instructions are better than the ones on the bottle.
Truck looks awesome!
Been using the waterless wash ceramic coat for several years now. Been doing it spring and fall or when I get a day off in between will do a quick detail.
Just used this for the first time on my black mercedes The end result is fantastic 👍
Just tried this on my new Mystang Mach-E in Rapid Red. I did a snow foam wash, then a soft mit hand wash, dried with microfiber cloth, chami, microfiber again (there was lots of residue left from PDI), then followed your method. I used Meguire's fast ceramic spray detailer (green bottle) on all the glass, trim and door jambs, under the frunk etc. The car is looking so good. I have it sitting in my garage now curing until tomorrow. I'm hoping that awesome beading action will help reduce the number of washes needed in the wet BC climate. Maybe a few tochless washes with a spray on and rinse application until the weather gets dryer again... then clay and repeat.
I used it couple weeks before seeing this video used it basically same way seemed like the best way to me good video thanks
Thank you for the tips man, I too love this product, it makes the Ruby Red on my 2017 F150 pop and gives it amazing depth and the shine and water sheathing properties are ridiculous.
I agree John I have a Ruby red expedition and used this product on it love the shine
Thanks for showing us how it should really be used.
I love this product...its awesome stuff!!
Love that product!! Been using it now for some time.
Ever use it at the self car wash? I’ve done quick washes before. It’s funny the looks you get when you’re halfway through and the timer runs out, grab the bottle of that blue stuff, couple minutes of spraying down the car. Insert money and then rinse it off? WTF was that? Mostly likely a new “lifer”?
Great video on this matter buddy 😉
wos going to do it this way myself just convinced me that it's a better way 😁
I just used this for the first Time Earlier today ..And let me tell you .This stuff is awesome..It shines Baby ..Deep Black Shine 💯
I used your method on my black truck. And your right its amazing thanks
Truck looks killer at the end in the yard 🤘🏻🤘🏻
I just did it this way and after finishing my truck, I started to doubt myself because it wasn’t the directions that were on the bottle. After seeing this video, it makes me feel a lot better that I don’t have to go back outside and rewash the entire truck. Thanks for this video!
Very similar to the directions in that the product is being mixed with moisture for ease of application.
I’m going to try this TODAY!
Thanks a lot! Your car looks great✨
Like the way you handle it. It really shine and last 😊
Thanks for the application method, just applied the product as per your instructions on my new Toyota Rav4, the result is awsome.
I've been using the mother's ceramic on my 19 f250 platinum and it also works really good.
Great demo.
Thanks bro. This was helpful. I did it all wrong, but now I know what to do. Clean ass truck, though
Used it myself, great product.
just earned yourself a new sub
Thanks a lot for these instructions! I used this method on a black 2024 Range Rover Sport. Results are amazing! Make sure not to overuse the product, it has a lot of power and stays on for a long time.
Get their hyper dressing and spray it on the tires for a UV protection and ultimate shine, let it sit for a few minutes then wipe remaining off the tires. Also works amazing for dressing up the engine bay making things look brand new!
Thanks so much for sharing, Looks amazing and the trick is really nice!
Gorgeous truck man! I have a 13 black gasser f150 fx4. I just used this stuff. Did it not so correct the first time just applying it dry after a wash then a week later did it the same way you did. Stuff is really good and I get compliments daily. Really makes that tuxedo black flakes pop.
Damn i should've done it like this i tried this product this morning and i followed the instructions and didnt care for the results ill redo it like this thanks man
Thanks for sharing, it will be more economical as well!
I’m gonna do my 8 day old brand new car for the first time, I’ve been trying to see the best way to apply this. I’m gonna apply the whole car in total front to back, then wipe off front to back. Hopefully that’ll be enough time for it to glaze up & be ready for removal. Excited.
Just bought a bottle, will try on my Audi tomorrow following your method
I don't know if you did it right, but it looks awesome brother, awesome job!
Thanks dude.. look impressive, will do your way with my car.
Excellent product, whats amazing is a little goes a long way. 2 sprays per panel is what i did and it came out amazing.
I did this same method when i first found this stuff and works great. Takes a little more time but works. Something in my head just doesnt agree with "just spray it off and thats it!" Lol
That stuff is badass
Looks great, I think you're on to something!
I have a Triple Black GT500, and will be trying this out!!
Nice truck keep making vids about it I love your truck
Damn thanks for the tip!
Dude, that is one badass truck.
Definitely recommend this method. Meguiars method the product won’t adhere to the paint 100% leaving some spots not getting any coating unless you wipe it down. Tried both methods and this last a lot longer
Wow did my car last night thanks for the help worked great
audio sounds great man
I use Maguire an it's amazing haven't use the Maguire Hybrid yet .if it looks as good on my car as your truck I'm sold .Grate video dud
Best cool video ever man 👍👍👍👍👍
Amazing!!
This is good idea to use ... I have been using spray when i got water on my car which is not good now i see how to do it ill make it same
Meguiars make crazy good products
Indeed I love their products, makes me want to buy all of them 😂
I JUST bought a bottle of this stuff, and came to RUclips to confirm that my idea of NOT following the directions was going to work better. Thank you for trying it first, and confirming that I'll have success. It doesn't look any harder doing it this way, but offers better protection with more product bonding to the clear coat rather than the towel.
How did it go Jeep Guy?
It worked very well. There was still a few hours of elbow grease, but it it all went quite smoothly, and gave excellent results.
I fucked my car allll the way up😂
Use the detail spray as well it works amazing in between washes
Just applied the exact product and did the exact steps. It works for the most part, just don’t spray too much! Takes forever to buff off lol but otherwise it’s great!
Yeah its oily
Yea...dude sprayed to much on his truck..only about 2..3 squirts per panel
.not 7!😂
Definitely don't spray too much!
im gonna try it that way
Did my truck this way. Looks awesome.
I do mine the same way and it works great I have a black 21 F150.
Great review, thanks but you forgot to mention you can use it on trim, wheels and headlights too. As far as your truck goes, IT'S BEAUTIFUL..
Great video... Thanks 👍😊
I did the same thing you did. Applied it the same way 3 times in total. Black car shine is sick on 7 year old paint and took out so many swirls and light scratches
Nice truck I love the newer looking fords
Did you do any prep to the paint like clay or polish or just apply ?
The best of!❤
Looking incredible..... and wheres the dirt track, im ready....
nice tip thanks sir
Awesomeness
This stuff is an awesome product, if you got the time and want to take it a step further put the NXT synthetic wax on top of it, that's my go to combination and that combo is the sauce!!
Meguiar's NXT Generation Tech Wax
?
I use it this way too. Way better. Best one I found for the buck. Makes my white supra pop🤤
ill be following this method. just a question, ill be using autoglym super resin polish and top with the meguairs hybrid cerami. will this affect the performance of both product or itll be just fine? thanks!
She's clean!!
Nice looking truck 👍
Man I’m sold
Nice truck man
Hi Corey.
After u wipe the waxed panel with damp towel.
How long did u wait/ let it dwell before u buff it with a dry towel?
Have you tried the Griot's ceramic 3 in 1 wax? If yes which one is better of these 2?
Good vid ! I have some 33 by 12s on my truck and it slings everything around ima need to try this
Lovely truck & amazing result. Did you just do this method once and that was it or did you follow up by spraying it on while the truck was wet and then rinsed it so it can spread again?
I use it as a wash soap, love it so much!!!
How's does that work? Do mind explaining steps?
Yes, how does that work? Enlighten me, please!!!
Used the same method ss u. Its been on for over a month so far. When i hit it with a pressure washer, it beads and sheets like crazy. Water just will not sit on the panels. Ive done family and friends cars with it too.
Love the video what camera do you use