Another Great video Dan! Mark makes covering look easy. You can tell he’s put hundreds of hours into perfecting his skill. Really enjoying this video series! Keep em coming
Moin Dan! ... I thank you for your great videos, hardly anyone else brings us his hobby as nicely as you. Just your hobby and what you make of it ... great. I wish you all the best and always a lot of time for the hobby ............. best regards from Germany
He is really good at the art of covering. Actually he is a darn good builder and doesn't crash very often. As a result his shop is full of planes. Terrible problem to have. 🤣🤣🤣
@@Capgains7777 buongiorno Marck e buone feste, bhe dopo anni e anni di esperienza ci credo che è un buon costruttore e pilota. Ha anche un negozio. Il migliore amico che vorrei avere è proprio così 😜😄😅😁🙂🙂💪👍👏 buoni voli amici
Great video Dan 👍…stickers might be white, works on orange and black😉. I’m impressed by the patience Marc has. I wasn’t really good in covering 😞 cheers from Munich🍺
I'm really digging a green pin stripe, green and orange is an amazing color combo. White would look killer, blue works as well as yellow and red. As for finishing off the scheme, having a star burst on the wings would be great (as well as the stabilizers and upright), simple, but adds to the look. Otherwise, I am a fan of checkers, and they would look great along the side (but I am biased on checkers, as I like them lol) Back to the original bit with green (white, etc), you can also add some thicker accent pins that follow along the same basic trim scheme (basically, don't have the pin along the edge, so it can have the color on both sides of the accent) Another thing I am a fan of, sweeping spikes, scallops, etc. (kinda like some of the stuff they do on RV's)
I don’t know what to tell you on which runs better in winter. When it’s really cold the fuels have a harder time vaporizing. It has been a while since I have flown glow, but I remember having to open up the high speed needle significantly if the last time I had flown was in warm weather. When it comes to the gasser, I don’t recall having to fiddle with the needles, but once you get it started let it idle for a while to get the block warmed up. Once it gets into the air it’s gonna get colder quick.
Just to add, cold air is more dense, so running a little richer is generally needed. To help hold some heat in the engine, wrap the block in foil, or block some of the airflow through the cowling
I've never used balsa rite on a plane that film is going on. It goes on and leaves brush marks and needs sanding. So more work. If the surface is sanded and you blow off all the dust with an air compressor and run a tack cloth over it the adhesive on the back of the covering will suffice. I have used Stik It or even a light coat of Aquanet hairspray prior to applying cloth covering to aid adhering to the frame.
No. Never been a big fan of dope in general. It is very fume tastic and I have found better non fume, or less fume for paint and such. There is no real need to use a sealer on balsa under covering like film or even a Tex that has its on heat activated adhesive on the back. Using dope on a frame is a technique used to cover full scale aircraft because the cloth they use has no adhesive on the back. They used to make a sealer named balsarite that came from Black Baron products. It was to be applied under covering. It would make the covering stick to balsa in an obnoxious way. Almost useless. If you need to pull back covering to make a repair… forget it. Not to mention the weight it adds to the overall build. Fortunately films and tex cloths have advanced us past the dope and tissue days.
Another builder I watched does not use a sock. He believes he obtains better temperature control that way. He does sand the bottom of the iron with fine sandpaper.
Yes. Mark’s house is right in the base turn for Kingsley Field ANG. We have almost daily sorties of F-15s and F-5 /T-38 variants. They like to launch when I am recording in the shop as well.
You have someone else cover your plane? Go threw all that work to build something that's quite beautiful when you consider the engineering and craftsmanship and all the work that went into it then have someone else finish it? I could never do that.
Another Great video Dan!
Mark makes covering look easy.
You can tell he’s put hundreds of hours into perfecting his skill.
Really enjoying this video series!
Keep em coming
Nice colors Dan, great friends working together looks great!
Great covering and So nice to see a REAL MODELER KEEP IT UP DAN . You put these R.T.F. TO SHAME .
NICE ONE. From a uk modeler.
I've been waiting for one of your AWESOME videos...
Thanks for the upload...
Moin Dan! ... I thank you for your great videos, hardly anyone else brings us his hobby as nicely as you. Just your hobby and what you make of it ... great. I wish you all the best and always a lot of time for the hobby ............. best regards from Germany
Harley colors!
Ecco il Signor Marck artista anche lui 👏👏👏💪👍👍👏👏👏💪💪💪👍 BRAVI RAGAZZI
He is really good at the art of covering. Actually he is a darn good builder and doesn't crash very often. As a result his shop is full of planes. Terrible problem to have. 🤣🤣🤣
@@Capgains7777 buongiorno Marck e buone feste, bhe dopo anni e anni di esperienza ci credo che è un buon costruttore e pilota. Ha anche un negozio. Il migliore amico che vorrei avere è proprio così 😜😄😅😁🙂🙂💪👍👏 buoni voli amici
Great video Dan 👍…stickers might be white, works on orange and black😉. I’m impressed by the patience Marc has. I wasn’t really good in covering 😞 cheers from Munich🍺
Hallo also nice codering from your friend greetings
I'm really digging a green pin stripe, green and orange is an amazing color combo. White would look killer, blue works as well as yellow and red.
As for finishing off the scheme, having a star burst on the wings would be great (as well as the stabilizers and upright), simple, but adds to the look. Otherwise, I am a fan of checkers, and they would look great along the side (but I am biased on checkers, as I like them lol)
Back to the original bit with green (white, etc), you can also add some thicker accent pins that follow along the same basic trim scheme (basically, don't have the pin along the edge, so it can have the color on both sides of the accent)
Another thing I am a fan of, sweeping spikes, scallops, etc. (kinda like some of the stuff they do on RV's)
Would love to know how he built his tables!
You can put some on the top black and orange lines greetings
Hallo you can put some black links from the front to the tail greetings
Is that a Top Notch Lear Fan.
Good work, men! 100 thumbs up! I was beginning to worry you’d given up on the Rebel! Do gas engines run better in the winter than the nitro ones, Dan?
I don’t know what to tell you on which runs better in winter. When it’s really cold the fuels have a harder time vaporizing. It has been a while since I have flown glow, but I remember having to open up the high speed needle significantly if the last time I had flown was in warm weather. When it comes to the gasser, I don’t recall having to fiddle with the needles, but once you get it started let it idle for a while to get the block warmed up. Once it gets into the air it’s gonna get colder quick.
Just to add, cold air is more dense, so running a little richer is generally needed.
To help hold some heat in the engine, wrap the block in foil, or block some of the airflow through the cowling
What is your source for your building magnets?
amzn.to/3WpuRXg
So it looks like you had bare wood, did you not prep your model with anything like balsa rite?
I've never used balsa rite on a plane that film is going on. It goes on and leaves brush marks and needs sanding. So more work. If the surface is sanded and you blow off all the dust with an air compressor and run a tack cloth over it the adhesive on the back of the covering will suffice. I have used Stik It or even a light coat of Aquanet hairspray prior to applying cloth covering to aid adhering to the frame.
Do you dope the bare balsa prior to covering??
No. Never been a big fan of dope in general. It is very fume tastic and I have found better non fume, or less fume for paint and such. There is no real need to use a sealer on balsa under covering like film or even a Tex that has its on heat activated adhesive on the back. Using dope on a frame is a technique used to cover full scale aircraft because the cloth they use has no adhesive on the back. They used to make a sealer named balsarite that came from Black Baron products. It was to be applied under covering. It would make the covering stick to balsa in an obnoxious way. Almost useless. If you need to pull back covering to make a repair… forget it. Not to mention the weight it adds to the overall build. Fortunately films and tex cloths have advanced us past the dope and tissue days.
@@Capgains7777 Thank you for the explicit information!👍
Another builder I watched does not use a sock. He believes he obtains better temperature control that way. He does sand the bottom of the iron with fine sandpaper.
you guys living near an Air Force Base? i think i heard a jet
arround minute 4 of the vid
Yes. Mark’s house is right in the base turn for Kingsley Field ANG. We have almost daily sorties of F-15s and F-5 /T-38 variants. They like to launch when I am recording in the shop as well.
sweet work inspiring music 😄
You have someone else cover your plane? Go threw all that work to build something that's quite beautiful when you consider the engineering and craftsmanship and all the work that went into it then have someone else finish it? I could never do that.