We need more men like this that are willing to teach young men what to do and how to do it! Work advice, life advice or just funny jokes and good music, men like this are a diamond in the rough!! Thank you for your content sir! God bless!
Broooo I disassembled the whole head and hand spun it on then fought it back together. Speed feed what. I can’t believe I didn’t know that. Thank you for the lesson.
DUDE! You, sir, are a legend! I have a weed eater that loads this way and I searched and searched and searched and couldn't find anything on how to load it so I've just been feeding the foot or so it needs and then refilling it after 3-4 minutes when it inevitably breaks cause I couldn't figure out how to load it all the way. THANK YOU SIR!!
I'm not talking about the instructions and trimmers that can't do that wint have instructions for doing. I'm saying I've never seen anyone explain it in a video.
I have the ego and it does this at the push of a button. Takes seconds and saves way more time especially when you don’t have a second pair of hands. It’s an amazing machine
I’m 42, been cuttin grass makin money since I was 9yrs old. It wasn’t until I was 23 that I learned this (bcuz I had a twin sided weed eater) maaaaaaan I tell ya what, it was only my side gig at 23 back then, but it saved me like 30 min and no cussing myself anymore…. Hahaha I’ve known this for so long now I thot everyone knew… well done on passing on your wealth of information, Sir. Be safe out there! 💪🏽💪🏽👍🏾👍🏾❤️❤️
Some times you just gota be honest. Seen this video and flipped my wig.. Ran to the site and basically had it in the cart. One quick job and a trip to the shed to check compatibility. Hell Yes! its gonna fit..! I knew it. I looked at the head and looked in disbelief.. to my horror. I've been tearing that head apart for the last three seasons. I had no flippin Idea. Great video! just thought I'd share
What are you talking about there's hundreds of videos of people doing this.. there's a video that the company made that shows you how to do this. That was "olmost" the dumbest the dumbest thing you could have possible said.
When I used to landscape I got pretty quick at feeding new line into the wacker/eater but I think this is a genius idea especially for people who are new to lawn care. And for the professional level it’s just faster and we all know time is money!
I bought that Stihl, I returned it. The windy head thing is so big you can't get weeds in the cracks of sidewalk. The straight pole may be better for your back, but you can't perfectly edge your edges. I use a curved craftsman now. The string feeding head is smaller and you can angle into more places. The only difference is you wind to pieces of string rather than one. Just as quick.
I just change out the head and I use the really sick line. It comes in a piece that’s real easy and loops over very very quick but my dad does this he loves it.
Switched to echo for the speed feed. That and a darned good simple 2 stroke. 4 mix is great, but the 111 I used really put me off and valve adjustments.
I have both Stihl and Echo that i used for my business. The auto-cut on the Stihl will jam up if you’re in really sandy or dusty conditions. I’ve never had a problem with my Echos. The one advantage of the Stihl is it is much easier to trim straight edges but they both do it equally good
I bought a cheap Ryobi weedeater a few years back that came with a winding tool to speed-feed the line. Huge help, except that it tends to overlap my line and it won't bump-feed lol
Arnetoli has been doing this for at least a decade and even more, with a much smarter mechanism , ease of use , maintenance and efficiency. I use it with 3mm "saw"(jagged) line -and never went nor looked back ever since. Thanks for this video either way, I support 🙏🏽
I have the Ryobi 2-stroke straight shaft weed trimmer and it has the same type of quick feed you can use the plastic green handle to wrap the string or do it by hand it’s so simple to do.
I use to landscape for 6 years and this was the best thing ever! Made it go so much faster, only problem I would have, people loosing the spring or it gets jammed
two things i learned about the speed feed, 1st step on the string and pull the reel of new sting to above you head, do that twice and perfect amount of string, 2nd, different trimmers rotate different directions and the spool will have a directional arrow, if you put it on backwards the line will clog or suck back in instead of out when you bump it
For residential use, 100%. As someone who does commercial mowing for a living, I would hate that. I keep a dozen or so pre wrapped heads in my truck so we don’t have to waste time wrapping them while on the job.
I have one of those is actually a great trimmer but every three or four years you need to replace the battery. I would suggest getting multiple batteries . It’s probably one of the best electric trimmers on the market.
Been running speed feeds since 2011.. best ever.. ran stihl trimmers for a while and went back to echo.. lighter and more durable... would encounter shaft issues on stihl trimmers and never on echos..
I'm so fed up with my Husqvarna trimmer. I have problems nearly every time I switch attachments. I was even going to buy multiple power bases, so that each attachment had a dedicated base...but they don't sell them separately. After using my hedge trimmer attachment, I can't get the weed eater to engage. Excuse my rant, this looks really helpful.
Forced to have it but I don't like them. Rather have the older ones where you put half the string into two holes, secure it in the notch and wind it yourself. These seem to not wind correctly and constantly jam up.
I got an attachment that fits on any modern trimmer. It’s so much better than the “feed” types likes this here. Plus you get 4 cutting lines instead of 2.
I just recently noticed that on my 38 years of aged now i was getting job done but would have to wait lot more time taking it apart and wrapping the string on the rod 😅
I just got through weed whacking my green house and i had to stop every 5 minutes to restring the mother fucker because it was super thick growth and kept busting the line up… just got done 5 minutes ago… im going to buy one of those head’s tomorrow! 3 acres isn’t bad to maintain if you’re not stopping every 10 minutes to restring. Thanks for the video player!
I’m just booping along to the MF DOOM. Nice choice 🎶
The man who holds heat but preaches non violence ALL CAPS WHEN YOU SPELL THE MAN'S NAME ! RIP
Rap snitches
What's the name of that track?
@@weewop188 rap snitches
Gta vibes
We need more men like this that are willing to teach young men what to do and how to do it!
Work advice, life advice or just funny jokes and good music, men like this are a diamond in the rough!!
Thank you for your content sir!
God bless!
Here some advice always u a good quality water based lube 😊
thats a real father figure kinda person
Absolutely!!
RUclips should insert these videos into every feed.
Keep up the great work
@@lizardman1303😅Q
He’s doing it the long way not teaching anyone anything here🤷🏼♂️😂
As someone who watch a lot of videos about mowing and this type of work I’ve never seen someone demonstrate this. Thank you sir!!
As a maintenance guy 14 yrs it’s cool seeing so many views on these type videos keeping the jungle at bay one yard at a time
I honestly don’t think this can be innovated further to be any more efficient. This is absolutely the peak of efficiency for trimmer heads. Love it
My electric EGO does the same thing, but with the push of a button.
Broooo I disassembled the whole head and hand spun it on then fought it back together. Speed feed what. I can’t believe I didn’t know that. Thank you for the lesson.
Same bro😂
That's what I'm saying imagine all the stress and sweat I dealt with back then in hot weather this would of help with knowing this 😂
Not all are capable of loading this way….
Me too brother, don't beat yourself up LMFAO 😅 I LOVE THIS
I used to just throw the whole dam machine away when it ran out . Not ANYMORE!
DUDE! You, sir, are a legend! I have a weed eater that loads this way and I searched and searched and searched and couldn't find anything on how to load it so I've just been feeding the foot or so it needs and then refilling it after 3-4 minutes when it inevitably breaks cause I couldn't figure out how to load it all the way. THANK YOU SIR!!
THANK YOU. All the videos I watch of lawn care guys...NO ONE has ever shown this.
only some string trimmer have the ability to do this, my milwaukee does. it was in the manual lol
@@LucidbkeoSome Ryobi trimmers can do this. They actually have a handle that will let you crank the head to speed up the wrapping.
@@rm5282 both owned by TTI, sounds like a good feature
You ever read instructions? This is in there!
I'm not talking about the instructions and trimmers that can't do that wint have instructions for doing. I'm saying I've never seen anyone explain it in a video.
I have the ego and it does this at the push of a button. Takes seconds and saves way more time especially when you don’t have a second pair of hands. It’s an amazing machine
You just know that old timer is one of a kind
Oh ye I watched this video last summer when I got my stihl fs-38
Yeah, the only one of his kind with a job.
I’m 42, been cuttin grass makin money since I was 9yrs old. It wasn’t until I was 23 that I learned this (bcuz I had a twin sided weed eater) maaaaaaan I tell ya what, it was only my side gig at 23 back then, but it saved me like 30 min and no cussing myself anymore…. Hahaha I’ve known this for so long now I thot everyone knew… well done on passing on your wealth of information, Sir. Be safe out there! 💪🏽💪🏽👍🏾👍🏾❤️❤️
Some times you just gota be honest.
Seen this video and flipped my wig.. Ran to the site and basically had it in the cart. One quick job and a trip to the shed to check compatibility.
Hell Yes! its gonna fit..! I knew it. I looked at the head and looked in disbelief.. to my horror. I've been tearing that head apart for the last three seasons. I had no flippin Idea.
Great video! just thought I'd share
You seem like the awesome uncle everyone loves to be around, just a fantastic and knowledgeable person that everyone looks to for advice
About time someone shows how to reload!!😮😮
What are you talking about there's hundreds of videos of people doing this.. there's a video that the company made that shows you how to do this. That was "olmost" the dumbest the dumbest thing you could have possible said.
Doesn't look auto to me
I've used this product for the past 3 year with my business, and it is one of the best ways to spend $30. Highly recommend.
When I used to landscape I got pretty quick at feeding new line into the wacker/eater but I think this is a genius idea especially for people who are new to lawn care. And for the professional level it’s just faster and we all know time is money!
I really liked that my newer echo is this style too, I used to have to cut 2 even pieces and reel it up manually like a fishing reel.
The echo is easier to use....
Echo is way better lol
I just got this when my bump head broke, I like this thing a lot, and it holds a lot of string.
Can you get something like this for a dewalt electric?
I bought that Stihl, I returned it. The windy head thing is so big you can't get weeds in the cracks of sidewalk. The straight pole may be better for your back, but you can't perfectly edge your edges. I use a curved craftsman now. The string feeding head is smaller and you can angle into more places. The only difference is you wind to pieces of string rather than one. Just as quick.
I just change out the head and I use the really sick line. It comes in a piece that’s real easy and loops over very very quick but my dad does this he loves it.
We run echo speed feeds on our stihl
Same here
Stihl Isa better trimmer but echos speedfeeds arw the absolute best
@@brettwiliams3711 Debatable. I prefer echo, but use both for my company
So much faster easier to change heads and disassemble for jam feed and still a quick bump system
Switched to echo for the speed feed. That and a darned good simple 2 stroke. 4 mix is great, but the 111 I used really put me off and valve adjustments.
I have that exact weedeater and have been doing it the hard way for two years. Thank you sir.
I have both Stihl and Echo that i used for my business. The auto-cut on the Stihl will jam up if you’re in really sandy or dusty conditions. I’ve never had a problem with my Echos. The one advantage of the Stihl is it is much easier to trim straight edges but they both do it equally good
I bought a cheap Ryobi weedeater a few years back that came with a winding tool to speed-feed the line. Huge help, except that it tends to overlap my line and it won't bump-feed lol
That holds alot of string! Thats awesome for big jobs or if you use everyday
I learned this way in 1988. It's crazy it's still done the same way!
Arnetoli has been doing this for at least a decade and even more, with a much smarter mechanism , ease of use , maintenance and efficiency. I use it with 3mm "saw"(jagged) line -and never went nor looked back ever since. Thanks for this video either way, I support 🙏🏽
I bought that same system 3 years ago and I will never use anything else but that it is slick and works perfect
I’m about to go home and try this. I swear I mess this up every damn time I do it. I hope it really work.
Did it work out for ya ? Haha
I never invested in 1 because I believe it will take me the same amount of time to string the factor head....
I think you're right
That's because they are for dummies.
I have the Ryobi 2-stroke straight shaft weed trimmer and it has the same type of quick feed you can use the plastic green handle to wrap the string or do it by hand it’s so simple to do.
I use to landscape for 6 years and this was the best thing ever! Made it go so much faster, only problem I would have, people loosing the spring or it gets jammed
I have pro tools but I also have the ego with the electric auto feed it's pretty sweet.
The Ego push button wind is great.
Way easiest way I have found.
I just replied the same comment LOL 😂
Love the ego tools! They're pretty impressive.
awesome. same principal as the speed feed 400 from echo.
I got the same one😂
Echo is better
two things i learned about the speed feed, 1st step on the string and pull the reel of new sting to above you head, do that twice and perfect amount of string, 2nd, different trimmers rotate different directions and the spool will have a directional arrow, if you put it on backwards the line will clog or suck back in instead of out when you bump it
Nice, thanks for showing how much string to leave on each side. Didn't know it would hold that amount.
Thank you Brother for the tips 👍🏽👍🏽
Thanks I’ve always struggled with this type of strimmer head 👍👌
I've always struggled finding a strimmer.
It's refreshing to see someone that knows how to string a string trimmer👍
I love the auto feed on Stihl, it's so convenient where you don't need to undue the string holder from the shaft
Ryobi have had a similar system for years. Absolute genius idea that should be mandatory on every make and model.
For residential use, 100%. As someone who does commercial mowing for a living, I would hate that. I keep a dozen or so pre wrapped heads in my truck so we don’t have to waste time wrapping them while on the job.
It takes me less than 2 minutes to pop the head and wrap, the amount of time you "save" by being able to wind it in, you loose fighting to line it up.
Wrap the same amount with duct tape and attach to shaft. You can change in field versus going all the way back to trailer
Someone's gotta make a drill attachment for that spin reel
Exists: EGO powerload trimmer, build in motor
@@simonhofstra5367 FTW!
Dude you should have made it !! $$$$
Good stuff brother, I got the ego trimmer, that is similar but has a button on top for automatic feed. I still like your Stihl trimmer.
Same here, love my echo trimmer!
Shindaiwa guys have been rocking this for a long time
Ive been restinging the classic stihl bump head for so many years. Its a part of my routine i wont change.
C'mon Bermuda, Ego's automatic brother, love your program. You the man.😃
I have one of those is actually a great trimmer but every three or four years you need to replace the battery. I would suggest getting multiple batteries . It’s probably one of the best electric trimmers on the market.
Not good for commercial use
Take it apart and put a few drops of 3-IN -ONE in it,makes it turn easier
what is 3in one ?
@@lion-of-lucia11583 in 1 oil
Been running speed feeds since 2011.. best ever.. ran stihl trimmers for a while and went back to echo.. lighter and more durable... would encounter shaft issues on stihl trimmers and never on echos..
I'm so fed up with my Husqvarna trimmer. I have problems nearly every time I switch attachments. I was even going to buy multiple power bases, so that each attachment had a dedicated base...but they don't sell them separately. After using my hedge trimmer attachment, I can't get the weed eater to engage.
Excuse my rant, this looks really helpful.
My EGO battery powered one automatically winds it up. Other than that it's the same but you press a button and it winds the string up.
Bought one too!!! love it.
I have this system. And i love it.
I live in a high rise and have never done yard work in my life, but I was watching this so interested 😂
On behalf of the brothers that grew up in single parent households thank you!
I hate doing this, I can never get it right!
Echo speed feed is so much better.
So is the Ryobi speed winder, I like their hand crank.
What a Master... Never realized how simple it was, I feel dumb!
See how to install your Speed Feed here ruclips.net/video/ai7U8aogPY4/видео.html
Forced to have it but I don't like them. Rather have the older ones where you put half the string into two holes, secure it in the notch and wind it yourself. These seem to not wind correctly and constantly jam up.
Need to make something u can set the head of the weed eater down on and use the motor to spool it up if it turns the right way 😂
You i like, you keep it simple, thanks soldier
That took longer that just using a regular head
@@icewallflatearth1158 nobody cares 😂😁😱🤯
I was today years old when I found out how to do this! Thank you
I got an attachment that fits on any modern trimmer. It’s so much better than the “feed” types likes this here. Plus you get 4 cutting lines instead of 2.
You the man!! I was struggling on how to feed the line and I should’ve asked when I bought it but your video was super helpful! Thank you!!!
Those heads been around for a long time. Got one on my weedeater. Been using for years.
Echo has about the same thing, I wasn't a fan of the speed feed at first but I like them now.
Makita has a button you push it automatically winds the string in! Works great!
Wow dude strait to the point. I was tryna feed it oldschool
I'm 46 and just found out my Ryobi trimmer can do this. I've been hand wrapping for years 😆
You’re not the only one lol 😆
My dude BYDBGC dropping knowledge like no other!!
I have been waiting for a new one for 3 weeks but such a good head 🔥I use my palm on bump same technique but less fidgety 👍
Atleast they fixed the issue of the string twisting and wrapping around the head on the older speed feed
I have them and they’re the best. Never going back to the old ways lol 20 years of that fight was enough
That’s an honest workin man, you can tell by his hands alone 👑😎👑
I have a similar speed feeder and it makes loading line crazy fast and easy.
I grew up on the ones you gotta take apart and wrap it by hand me and my brothers would've loved to have this😂😂😂
That's what i use at work thanks for showing me my supervisor was trying to explain how but you really helped Thank you
Where was this video when I needed it
Dude. Ive been fighting my trimmer after i refilled it... Incorrectly apparently. Thanks for the tip. That's dope.
How in the world did the algorithm know that I needed this tip!?!?!
Be afraid….be very afraid!!
Thank you for posting this! I’m a woman and this made my life easier!❤❤❤❤
I Like the ECHO Speed feed better its smaller and still fits on a stihl. Used them for years.
Thanks for the tip bro...we use all still equipment. Will definitely change out bumper heads
Thanks for the video. I appreciate this like you wouldn't believe. So many different loading techniques, and this one is great!
Now to get these young people to pay attention. My mam is giving us gold
So many folks get these heads and can't refill them and it's funny. I was a stihl mech and always had to show people.
When the older gentleman dressed like this tells you how to do something, you listen.
I just recently noticed that on my 38 years of aged now i was getting job done but would have to wait lot more time taking it apart and wrapping the string on the rod 😅
I watched this several times and had it shown to me ...and still can't get it right 😂
I just got through weed whacking my green house and i had to stop every 5 minutes to restring the mother fucker because it was super thick growth and kept busting the line up… just got done 5 minutes ago… im going to buy one of those head’s tomorrow! 3 acres isn’t bad to maintain if you’re not stopping every 10 minutes to restring. Thanks for the video player!
Man! Thanks for showing us how it works and thanks even more for including the model! Professional.
Keep doing vids like this unc, some of them youngstas dont have a pops to show them these things
Thank you because for years I have been doing it the hard way 😂😂😂😂😂 honestly and it never bumps out lol
I need this gentleman to teach me everything
The caps wear out really fast I ran one for a season then switched back I had to buy five of the push buttons 😂😂❤
Thank you I just bought one of those I never even thought that it be that easy
Something I actually needed to see on here 😮
Awesome video. I did not know that's how stihl speed feed works. Glad I do now because I love how easy my Echo speed feeder works.
Echo Speed-Feed universal trimmer heads are the way to go
Best invention ever. Use one on the farm all the time.
Wow even I who used old type with spring contact did not know this. Thank you.
Dude are you serious!!!!!!! I’ve been jacking around getting so mad trying to wined this damn thing up!!!!! Thank you sir
This changed my life.Thank you so much sir