Sunlu S9 Plus - 3D Printer - Bed Leveling
HTML-код
- Опубликовано: 15 сен 2024
- Putting together the Sunlu S9 plus
Original video: • Sunlu S9 Plus - 3D Pri...
Amazon Links
S9 Plus: geni.us/w9ZE
Recommended: geni.us/JustVlads
Dryer Box: geni.us/tcJAw
www.sunlu.com/....
3D Touch Auto Leveling, FDM 3D Printers with Unique Clogging Detection, 4.3 inch Touch Screen Large Printing Size 310×310×400mm Pre-Assembled Printer with Dryer Box
Easy Assembly, Robust Design
SUNLU S9 Plus FDM 3D Printer is 95% pre-assembled for convenient using. We added two inclined rods between the Y axis and Z axis to make the printer structure more stable, which will bring you more stable printing for better model.
Scientific Structure, Use Conveniently
There is a high-performance motor and a heat dissipation fan of SUNLU S9 Plus Printer which makes work efficient and temperature stable. And tool storage drawer of the printer can be putted some 3D printing tools like card reader, USB cable etc..
Come with Filament Dryer
Our FDM 3D Printer is with a filament dryer box controlled by the touch screen of the printer helping remove excess moisture from filament, which can improve your print effect immensely.
Large Printing Size
310×310×400mm large printing size will meet your most printing needs. And the machine size is 600×490×640mm, which is desktop printer standard and will not take up a lot of space in your room.
Touch Screen, Faster Operation
SUNLU S9 Plus 3D Printer is operated by touch screen, which will faster than other printer type used knob. All kinds of printing operations can be done with just a few touches of the screen.
Smart Auto-Leveling
The newly upgraded auto-leveling function of S9 Plus printer, which will assists you level and make you start to print quickly. 16-point automatic bed leveling technology can automatically compensate for the printing height of different points of the heat bed.
Clog Detection and Resume Printing
SUNLU S9 Plus 3D Printer supports clog detection and resume printing. It can warn and pause printing automatically when filament clog. If your filament runs out, you can pause printing and exchange a new filament, and then continue printing. If you encounter a power outage, you only need to wait for the power to recover and choose to resume printing.
My channel @JustVlads
As an Amazon Associate I earn from qualifying purchases
S9 Plus: geni.us/w9ZE
Recommended: geni.us/JustVlads
Thank you ...
Thanx for this video - the z offset thing is what i needed -- the damn noozle was too far away from the bed and the manual delivered with the printer was for the t3 :( it is my first autoleveled printer so this was new for me .. THNX !
Good evening, I hope you're well.
Excellent video and thanks for sharing!
Please, I have a problem, I recently bought this type of printer but when I try to make it work, an error message appears "BLtouch line error please check
Please reset" not forgetting that the bltouch can't even move along the Z axis, it's like it's stuck.
I don't know how to fix this, can you give me some pointers? Have a great day!
Great video
Hi, do you think is possible to connect in parallel a second layer fan without the fan cable to overheat? I ask because I tried the same in an Anet A2 and the layer fan cable overheat after 20 min, by the way Anet A2 is 12v. Thanks in advance.
Does anyone know how to fix the levelling device error, whenever I go to auto level the light goes red and just gives me that error. Thanks
I Had this issues
Get a pair of tweezers and pull the probe out gently in and out about 20 times
It can get dust and debris in there and stick and cause that red flashing
Thanks so much for this, question, do you know how to fix the SD card slot, mine doesn't click the card anymore to hold it in. ( been using something heavy to hold it in. Thanks again. Keith