RockShox Fork Full Rebuild Tutorial | How to Service Upper and Lower Legs Every Detail! DIY EASY
HTML-код
- Опубликовано: 5 июл 2024
- In this video we do a full rebuild of a RockShox Reba RL with the Motion Control damper. We go Step-By-Step as we rebuild the fork on my wife's bike. We will go over all the steps and why we do them the way we do. If you follow this exactly your fork should be as good as new.
Damper Side Fluid: amzn.to/3b2NZVz
Lowers Oil (note you can use 15W as well): amzn.to/3GcPJd1
Sram Butter (This is even better it's Dynamic Seal Grease by Rockshox): amzn.to/3bfjhsx
Bicycle Grease: amzn.to/3b4wnbC
Enter Your Serial Number Here to Get Seal Kit Info:
trailhead.rockshox.com/en/sea...
00:00 Quick Intro
00:19 Things You'll Need
01:09 Bushing Condition Check
02:18 Relieve Air Pressure
02:42 Remove Rebound Adjustment Knob, Loosen Bottom Fasteners
03:17 Breaking Press-Fit
05:02 Removing Lowers
06:13 Removing Dust Seal Dust Wiper
07:02 Cleaning Lowers
08:24 Installing Dust Seal Dust Wiper
11:19 Removing Air Spring
13:26 Rebuilding Air Spring
19:05 Adjust Fork Travel
19:28 Installing Air Spring
21:44 Removing Damper and Rebound Rod
23:41 Rebuilding Motion Control Damper and Rebound Assembly
27:57 Installing Rebound Assembly
29:10 Adding Damper Suspension Oil
30:55 Installing Damper
32:35 Installing Lowers (Skip to Here for Lowers-Only Service)
36:57 Finishing Up
38:02 Sexy Outro 
Авто/Мото
I loved this tutorial. Matter of fact. Clear and you explain what you're thinking/looking for. WOW!
Great video with attention to details. Very useful stuff, thanks for sharing. I'm watching and follow it step by step as I'm doing my front suspension full service.
Glad it was helpful!
Excellent systematic approach gives the confidence to have a go at any fork. Might struggle to get o rings for old forks though may have to resort to measuring each one. Great video - good job it wasn't wife's tee shirt.
Neil, You can do it! On of my goals is to encourage the can-do attitude. We since took the bike out on trails and it is butter smooth!
Well done video! Just watching this a couple times, I'm ready to do my first full fork service by myself, once I get all the kits in.
@@justahasbeen , wasn't bad at all. First time took longer, as expected, but this video covers it all. Just take your time, and keep track of the steps and parts, so you can do it in reverse to put it back together.
Easy way to save $100+ letting the bike shop do it, and the oil and seals probably cost $50, and you'll have enough oil to do this at least 5x or more, especially if only doing the lower service.
Very good tutorial on this model
Thank you, very clear, and easy to understand!
Hey, amazing video. Exactly what I needed. Especially for the Dual Air Reba A1. Two Questions: where did you get the service kit from and I have heard that you can put some oil ~5ml on top of the piston into the positive air chamber. This should help to stay air tight and resoke the soft pads unter the dust lips - is that correct?? Greetings !
I can't do the fork service, I don't have the specific mountaindew tshirt.
Great video, to the point, well laid out and systematic. Good job~! liked and I subscribed
Thank You 31acruz I hope it gets your fork going!
I can use this for my discontinued Rock Shox Tora TK SL
Great Thanks
Very very useful tutorial! My only question is that why not to clean every piece in IPA or brake cleaner?
Great tutorial! Seals are easier to take out with an open end wrench tho :)
I have a quick question. Should motion control damper be submerged in oil or it should be barely touching oil so it has some airr in it too?
I am about to service my rockshox model RL/29" . Is it important to remove the fork from the frame of MTB or can this servicing be done without dismounting the fork from the frame, thus with less effort altogether?
do you got a copy of that manual you where reading?
When I go to the rockshox website to put serial number in it doesn’t recognize the number. I have a rockshox Reba RL with cable adj, dual air with 115mm travel. Any help to know how much oil to use?
Unfortunately I cannot get past clamping the lowers in a bike clamp. Always clamp by steerer.
Ziptie omg just use some piece of twine !
Can i use 10wt on the lower leg ? I have the exact model as yours
He use 0w on the lower legs. Rockshox recommend 15w (no 0w, no 10w). 10w is closer than 0w to 15w. You are better than this channel. 😂
Where is the serial number found?
The serial number is on the back of the crown. On the backside of the fork near the top.
Cuál es la medida de las esponjillas de 5mm o 10mm?
Herb please tell me you didn't forget to shave 10k off the remelhoffer shim gaskets before you miked out the flugeldozzen ambient operating temperature check valve catawompus sensor. Just saying.
Remelhoffer shims are in the Mark 2 this one relies on differential girdle springs. The 123ml of flugeldozzen was added to dampen the lunar side shaft.
@@HerbOMatic you are 100 percent correct Herbert. Somebody's been reading their technical support field advisors disgruntled customer reference chart rebuttal reply options for situations appendix A column 1. And they say common sense just doesn't exist anymore.
Can i use maxima plush 10wt for rockshox lower leg ?
I think it would probably be fine, but plush is designed as a damper fluid more than anti-wear. They lower leg oil preserves the bushings and prevents alot of metal to metal contact. I would use the correct oil if my forks were worth alot of money.
Okay. But last question sir what alternative oil of rockshock fluid 15wt for lower leg.? 🙂
He use 0w and Rockshox recommend 15w. 15w no 0w PAY ATTENTION
make it look easy.
Thanks, it worked out with just using your video.
Horrified when you cut up that Mountain Dew Shirt!
Yes, the sacrifice was hard to watch. A true classic.
Thanks for the video, very helpful.
It looks like you have the 2012 A1 Reba, so consider upgrading to the RCT3 damper and newer rebound.
11.4015.544.270
11.4018.025.002