Best tutorial out here, David. Straightforward and clear. I abhor any sort of mechanical repair. Give me a horse to heal and I'm inspired, but car stuff is like a foreign planet. Anyway - the hardest part of this was finding a T-20 screwdriver in this rural region. The other thing was unscrewing and screwing back in the fasteners. You can't see what you're doing. It's by feel, and I have no sense of that. But even I, mechanical moron extraordinaire, managed to complete this repair, made clear and simple by an excellent teacher. Bit of a miracle, actually. Thank you.
Am having trouble with steering wheel it’s stiff off and on, and I get the steering wheel icon. Could you do a video on it. I hoping it’s not the electrical steering module. Thank you
Perfect I sat in my truck waiting for my dog's grooming appointment, I had already bought the switch but had to stop and buy the T-20 driver in a matter of minutes I had the switch in and things back together. Thanks a lot for your video
Great video. Broke the turn signal when I removed the dash replacing the a/c evaporator. The time to replace the multifunction switch was less than 5 min.....and I was quoted 2 hours of labor by a local shop.
Very good video.... However; I have a question, If my horn, left turn signal is blinking but light itself does not blinks, neither the left side reverse is working. Also if I click my steering wheels arrow to look at what the computer says it won't do anything. What do cost that? is it the Fuse box or a part that goes in the steering wheel?? Thanks you!
Easy precise and very clear! Question for you, will this correct the fact that when I put the signal to the right it does not disengage after turn its stays on and I have to manually turn it of?
Do you have a video on steering wheel evic controller ( left side ) my phone and VR buttons stopped working the other buttons works that shows on the cluster
Thanks For Your Help on These Ram Trucks ...I Seem to have a Constant po440 and a p0456...any advice On what parts seem to go bad on These evap systems??
What if wipers still stop in some settings? Wipers work fine on the timed settings. But when on fast they hang up. Much improved but still not operating perfectly. Any suggestions?
Question i have a 2013 Ram 1500 and im having turn signal problems my left turn signal want flash ive replaced the bulb and socket . Ive also replace the power management unit under the hood, so what i really want to know if the turn signal switch cold be bad and maybe part of my problem.
I have a problem with my windshield wiper sometime their works sometimes it won't get stuck from time to time what do I do about that also my auto start work sometimes I didn't stop working altogether what is the problem with that is well My name is Donnie Britton thank U for your Help
Is this the same procedure to replace the cruise control lever on the right hand side? I really just need the back of the lever but cant find anywhere to buy just the back.
David does this switch control the buttons on my steering wheel that control the cruise control the lights on the buttons and horn? I have a 2016 Ram3500 and this just started but if I turn the wheel it make contact. Thanks
This switch has nothing to do with those other features. Its possible the clockspring could be bad or the right side switch itself. To be sure.....the system needs to be scanned with a higher end scanner thats capable of checking all modules in the truck. I am sure that there may be a code present. Then we would have a direction to go in.
My 2016 Ram1500 does the same. A light karate chop to the left off the buttons usually gets the cruise on/off button to respond for a while. I am guessing a bad ground but I don't want to take it apart when I don't know what I am doing and have no plan.
I need help. Just replaced my brake light switch on my 2011 Ram in the hopes of it repairing my non functional cruise control. I guess next is replacing that cruise switch right? I’ve looked for fuses and relays and I can’t find any other info. What’s your opinion?
Its possible, I recommend taking the switch off and inspect everything to see if you can find anything related to that cancel arm to see if something else might be bad also.
My friend left his drivers window down at dennys and the sprinkler hosed the dash down. Killing his stereo and his high/low sw. Any thoughts on if the switch can be repaired? Ie contact cleaner or something? (2010 ram truck)
Hi, great video very nice to share your mechanic knowledge. May be you can help me. My 2011 ram 1500 slt have esp light on in low right. This is the only light on. I can unactivate or activate and light come on left of the dash. But on right the light stay on everytime. I have no fault code. I don't know how to find the cause.. in advance thank you.
Great video. I just changed the oil and filter in my 2012 3500. Getting the oil filter out was the toughest party of the job. Also, how will we know when the multi function switch needs to be replaced, is it an easy trouble shoot? Thanks for your videos
Thanks for watching. There can be codes related to the switch that you diag and then if so, replace the switch. There is no actual switch resistance test you can perform like in years past. The internal wiring is different. Eventually during the diag procedure it becomes a replace and recheck.
At this point all the modules need to be scanned to see if there is a comm issue or something else causing issues with the wipers. Otherwise it would be a guess and throwing parts at it hoping to fix it. You need access to a scanner that can check for codes in all the modules....not your basic code reader
Thanks for the feedback. Glad that the subject matter wasnt the only thing noticed. I try my best to edit as well as I can. Make sure to subscribe if you havent already.
What was the malfunction that caused the switch to be replaced? My 1500 has been having whacky issues with the turn signals and was wondering if this was a similar issue.
pgr0104 It was that when you turned the left turn signal on....the right side would flash and vise versa. That's usually the most common issue. Thanks for the question. Make sure to subscribe!
MotorCity Mechanic thanks for the quick reply! I have a 2015 Ram and I am having a major issue with my projector headlights.. the dash is saying the driver side turn signal is out. During the day it operates as normal but when I hit the left turn signal the mirror blinker is hyperflashing. The major problem is at night it is completely lit up as if the blinker is on but it doesn't flash and when I hit the turn signal nothing happens it just stays lit up... the passenger side is working fine and at night dims as it is supposed to. When I drive at night the entire left side of the road is lit up orange! Any idea of what this may be or have you ever seen this? (I ordered a multifunction switch already will try replacing it when it comes in.)
Thanks watching. Thats an older video and filmed at work during the day when I am rushed. I dont film that way these days and have improved since then with equipment and quality. Make sure to check out the latest videos and subscribe! Merry Christmas
Thanks. I try to be specific but that also limits my audience. Makes for slow growth. Thanks for watching the videos and for the cool words. Make sure to subscribe
Great video, Has anyone else had any luck fixing the issue with the wipers being stuck on and in low speed and not having the turn signals, high beams not functioning? I don't want to start just tossing repairs at it.
hi George .... Did you try replacing the switch and did it work? I'm having the same problem your describing with your's. I have a 2015 ram 1500 Thank's...Ken
@@georgemacut1757 Thank's so much for the quick response ... I'm going to give it a try , My ram just starting with the same issues today. Have a Great Night....Ken
Best tutorial out here, David. Straightforward and clear. I abhor any sort of mechanical repair. Give me a horse to heal and I'm inspired, but car stuff is like a foreign planet. Anyway - the hardest part of this was finding a T-20 screwdriver in this rural region. The other thing was unscrewing and screwing back in the fasteners. You can't see what you're doing. It's by feel, and I have no sense of that. But even I, mechanical moron extraordinaire, managed to complete this repair, made clear and simple by an excellent teacher. Bit of a miracle, actually. Thank you.
Wow, easiest DIY I've ever done. Your guidance is 2nd to none in my book and I'm now subscribed.
Am having trouble with steering wheel it’s stiff off and on, and I get the steering wheel icon. Could you do a video on it. I hoping it’s not the electrical steering module. Thank you
Oh I have a Dodge Ram pickup, 2013
Perfect I sat in my truck waiting for my dog's grooming appointment, I had already bought the switch but had to stop and buy the T-20 driver in a matter of minutes I had the switch in and things back together. Thanks a lot for your video
Your welcome and thanks for finding the video and for the comment.
Great video. Broke the turn signal when I removed the dash replacing the a/c evaporator. The time to replace the multifunction switch was less than 5 min.....and I was quoted 2 hours of labor by a local shop.
Glad you found the video......thanks for commenting and make sure to subscribe
Thanks for posting. I just broke mine by accident tonight and have ordered a new one. Glad to know it won't be difficult to fix!
Your welcome. Glad to see the video helping people. Make sure to subscribe and watch my other videos as well.
Great video!...doing that DIY right now, just one inquiry...anything about disconnecting the batts. to avoid any airbag issues?.
Thank you!
Thanks for a great video. Could you point me to where I could get wiring diagram for windshield wipers on 2016 promaster
Great video this fella explains it in a way you can easily understand look forward to more
Very good video.... However; I have a question, If my horn, left turn signal is blinking but light itself does not blinks, neither the left side reverse is working. Also if I click my steering wheels arrow to look at what the computer says it won't do anything. What do cost that? is it the Fuse box or a part that goes in the steering wheel??
Thanks you!
Got a video on how to replace the cruise control buttons?
I don’t have a video for that as of yet but will keep that in mind. Thanks for asking
Easy precise and very clear! Question for you, will this correct the fact that when I put the signal to the right it does not disengage after turn its stays on and I have to manually turn it of?
Do you have a video on steering wheel evic controller ( left side ) my phone and VR buttons stopped working the other buttons works that shows on the cluster
To the point. I replace my switch. Easy with your directions. I'm a 60 year young woman. I accidentally slip on my step and broke my switch.
Thank you David. A huge help for a crazy situation.
Thanks For Your Help on These Ram Trucks ...I Seem to have a Constant po440 and a p0456...any advice
On what parts seem to go bad on These evap systems??
The inside of my 2016 dodge ram 1500 got wet during a storm.
My shifter control knob.
Doesnt light up or move into any gear.
What might my issue be.
What if wipers still stop in some settings? Wipers work fine on the timed settings. But when on fast they hang up. Much improved but still not operating perfectly. Any suggestions?
Loved your tip for seperating the covers!
Thanks Mark. Glad that the tip was helpful. Appreciate the feedback. Dont forget to subscribe!
Question i have a 2013 Ram 1500 and im having turn signal problems my left turn signal want flash ive replaced the bulb and socket . Ive also replace the power management unit under the hood, so what i really want to know if the turn signal switch cold be bad and maybe part of my problem.
Do you have a video showing how to replace the cruise control switch for a 2010 Ram1500? Thanks
Thank you. This video helped me a ton. Very good at articulating the procedure.
I have a problem with my windshield wiper sometime their works sometimes it
won't get stuck from time to time what do I do about that also my auto start work sometimes I didn't stop working altogether what is the problem with that is well
My name is Donnie Britton thank U for your Help
we own a 2015 doge ram 1500 and every time we use the turn signal the windshield wiper comes on ! will this fix this situation ???
Is this the same procedure to replace the cruise control lever on the right hand side? I really just need the back of the lever but cant find anywhere to buy just the back.
David does this switch control the buttons on my steering wheel that control the cruise control the lights on the buttons and horn? I have a 2016 Ram3500 and this just started but if I turn the wheel it make contact. Thanks
This switch has nothing to do with those other features. Its possible the clockspring could be bad or the right side switch itself. To be sure.....the system needs to be scanned with a higher end scanner thats capable of checking all modules in the truck. I am sure that there may be a code present. Then we would have a direction to go in.
My 2016 Ram1500 does the same. A light karate chop to the left off the buttons usually gets the cruise on/off button to respond for a while. I am guessing a bad ground but I don't want to take it apart when I don't know what I am doing and have no plan.
Well done video. Clear and concise instructions, good video production, and a few great Pro tips that really helped. THANK YOU!
You are welcome! Thanks for the comment about the finer details. Most pay no attention to that. Make sure to subscribe and check out my other videos.
Do one on a 2016 cruise control switch change out
I currently dont. I will certainly keep it in mind as a future video. Make sure to subscribe.
Yes please do one. My 2017 has an error code for the cruise control
Best video I've seen on this. Some of the footage is a little grainy, but well done, brother. Thank you. In fact, subscribed.
Fantastic presentation! Clear narration and well demonstrated. Thank you for posting 👍
Is it possible to put a 2013 dash cluster in a 2010 ram 1500?
My cover on my 09 does not look like that can’t figure out how to get it off
I need help. Just replaced my brake light switch on my 2011 Ram in the hopes of it repairing my non functional cruise control. I guess next is replacing that cruise switch right? I’ve looked for fuses and relays and I can’t find any other info. What’s your opinion?
Hello buddy.
I have a 2015 Ram 1500, 5.7L that is throwing a U113B-00 code. Could you help me out please to fix this issue. Thanks
Thanks for the video. Do you have a recommendation on a kill switch for a 16 2500 6.7 ? Thanks again!
Can this switch be the cause of my signals not self canceling on my 2014 3500 ram? Thanks in advance
Its possible, I recommend taking the switch off and inspect everything to see if you can find anything related to that cancel arm to see if something else might be bad also.
So good explanation you do. Very good and thank you!
What about the buttons on the left side of the steering wheel that controls resetting mpg and tire pressure readings etc? They do not respond at all.
It's called steering wheel evic control
My friend left his drivers window down at dennys and the sprinkler hosed the dash down. Killing his stereo and his high/low sw. Any thoughts on if the switch can be repaired? Ie contact cleaner or something? (2010 ram truck)
Hi, great video very nice to share your mechanic knowledge. May be you can help me. My 2011 ram 1500 slt have esp light on in low right. This is the only light on. I can unactivate or activate and light come on left of the dash. But on right the light stay on everytime. I have no fault code. I don't know how to find the cause.. in advance thank you.
I replaced it and it still dont work. Blinkers dont turn on and wipers are on low like every minute, 3 or 4 wipes, any ideas fuses looked good
Its something that will need some diag....its a guess at this point. Nothing common that I have come across
Robert Romero what did you do to fix this? Mine started to do this today as well and if like to fix this if you know the issue
Great video. I just changed the oil and filter in my 2012 3500. Getting the oil filter out was the toughest party of the job. Also, how will we know when the multi function switch needs to be replaced, is it an easy trouble shoot? Thanks for your videos
Thanks for watching. There can be codes related to the switch that you diag and then if so, replace the switch. There is no actual switch resistance test you can perform like in years past. The internal wiring is different. Eventually during the diag procedure it becomes a replace and recheck.
wow Dave. it doesn't get any clearer then that. Great Job!
Thanks Tom!
Where is the turn signal relay so I can switch it to an led bulb compatible relay? Nice video
Can I get this part number please I'm having issues finding this part
How common is it for these to go bad on a Ram?
+Corey Constant I have only replaced 2. Not common at all. Thanks Corey for the question
I replaced this but my wipers still randomly come on. Where should I go from here?
At this point all the modules need to be scanned to see if there is a comm issue or something else causing issues with the wipers. Otherwise it would be a guess and throwing parts at it hoping to fix it. You need access to a scanner that can check for codes in all the modules....not your basic code reader
@@MotorCityMechanic do you have a video on any of that? I've used alloy of your videos btw they're great!
@@turdferguson7813 Not at this time. I will keep it in mind the next time I have one in for that issue.
Thank you ... after breaking mine off today , you made this look to easy...
Glad I could help. Make sure be more careful with the new one 😂. Thanks for watching and make sure to subscribe
Nice editing and your information came across very well.
Thanks for the feedback. Glad that the subject matter wasnt the only thing noticed. I try my best to edit as well as I can. Make sure to subscribe if you havent already.
What was the malfunction that caused the switch to be replaced? My 1500 has been having whacky issues with the turn signals and was wondering if this was a similar issue.
pgr0104 It was that when you turned the left turn signal on....the right side would flash and vise versa. That's usually the most common issue. Thanks for the question. Make sure to subscribe!
MotorCity Mechanic thanks for the quick reply! I have a 2015 Ram and I am having a major issue with my projector headlights.. the dash is saying the driver side turn signal is out. During the day it operates as normal but when I hit the left turn signal the mirror blinker is hyperflashing. The major problem is at night it is completely lit up as if the blinker is on but it doesn't flash and when I hit the turn signal nothing happens it just stays lit up... the passenger side is working fine and at night dims as it is supposed to. When I drive at night the entire left side of the road is lit up orange! Any idea of what this may be or have you ever seen this?
(I ordered a multifunction switch already will try replacing it when it comes in.)
Thank you for the video!
Only suggestion I have is to just put a little more light on the subject when you are filming
Thanks watching. Thats an older video and filmed at work during the day when I am rushed. I dont film that way these days and have improved since then with equipment and quality. Make sure to check out the latest videos and subscribe! Merry Christmas
Thank you for that video, good thing they make it easy to replace. I have broken 2 of them now. They should be stronger.
hey can you guys do a jeep liberty 2012 water pump change
+Brandon Caballero I will keep it in mind for a future video the next time one comes in. Thank for watching and have a great 4th
Great video fixed mine today!
good job David.
Thanks Mike!
Thanx for all the awesome videos! These are some next level tutorials.
Thanks. I try to be specific but that also limits my audience. Makes for slow growth. Thanks for watching the videos and for the cool words. Make sure to subscribe
Great video,
Has anyone else had any luck fixing the issue with the wipers being stuck on and in low speed and not having the turn signals, high beams not functioning? I don't want to start just tossing repairs at it.
hi George .... Did you try replacing the switch and did it work? I'm having the same problem your describing with your's. I have a 2015 ram 1500 Thank's...Ken
@@kenneth4685 yes sir I did replace it, simple, easy fix that took care of the problem
@@georgemacut1757 Thank's so much for the quick response ... I'm going to give it a try , My ram just starting with the same issues today. Have a Great Night....Ken
Good luck hope it fixes your issue and you are very welcome. I understand the frustration trying to find an answer on topics
Thanks for making this video, you saved me a lot of money.
Your welcome and thanks for the comment. Make sure to subscribe and enjoy the weekend
What does the multi-functional switch control.
Mainly items like turnsignals and wipers. Some control headlights on some vehicles.
How many miles on that vehicle??
+drchulo76 this vehicle had around 20,000 miles
Thanks for your video
Great video bud
Thank you the video help me big time save money than going to the dealership or a shop..
Another great video. Thank you.
Thanks Ed. I appreciate you keeping up with the channel.
Very Simple Video And Very Well Explained . Thank you 5 *****
Many thanks. Make sure to subscribe and check out my other videos.
thanks for the video man!
Your welcome. Make sure to subscribe and share the videos with others!
Good job
+llwizzoll Thanks for watching. Much appreciated
you are a master !!!!
Out'fkn'standin! Saving me a huge headache for sure! Bravo zulu Brother
Excellent video, great explanation, keep up the good work!! :)
+drchulo76 thank you very much. You keep watching, I'll keep making more
new follower on twitter now
+Travis R. Thanks Travis.
Thank You :-)
excellent video david thanks
Your welcome Mark. Thanks for watching
Great video sir
Many thanks!
Do the Hazard lights run through the multifunction switch?
Thank you David. A huge help for a crazy situation.