@@Synthwave89 Yea, in Aerospace the welds have to be virtually invisible. Any irregularity or bump is a friction point that will heat up on re-entry. Something you want to avoid.
This feels like a higher level, Sarah. I hope that there are former Toyota engineers watching your work. You make the absolute best content of this type on this platform. Please make sure to rest (we'll wait) but don't stop.
Having custom exhaust built is truly a dying art. I ran/ worked in a custom shop for over 20 years. Built hundreds of one off systems. The quality of this man's work is definitely top tier. And to have a system built to that caliber with those materials is way beyond what the average consumer is expecting to pay. You certainly picked the right person to build that exhaust Sarah. Well done.
I have to rewatch this vid a few more times..........so much wonderful detail. As you said Sarah......this exhaust system is a work of art........👍 to Mr. Forrest. Hats off to those BBQ guys. Thanks to Charlie for stepping in.
Forrest did an amazing job on that exhaust system. Having worked in the aerospace industry for several decades, it's easy to see where his attention to detail comes from. Kudos to Charlie on the execution of the oil pan mod to clear the front sway bar.
Master Welder Forrest and Sarah collaborated to produce one of the top world class exhaust systems available on the planet. The cost of which is four times the initial retail cost of this little toy bubble. Money well spent.
Looking forward to your next t-shirt, with a picture of a propane torch: "It's the solution to almost everything in life. If you can't do it, burn it until you can. I don't know if that's actually something that you should live by, but it worked in this instance."
What a lovely cap to my day! Just found out that a year’s worth of work and two years of planning came to fruition. I’m a violin maker and just found out that I was awarded certificates of tone for a quartet and a viola I made in an international competition. This video was a cherry on top!
Durometer rating, just like on my roller skate wheels from the 70s! I can’t stop 🛑, Sarah you always make jokes and here I go, “Sarah do you want to jump on it again” says the SpaceX welder. Just too funny, then watching you do it with such enthusiasm. This was my favorite video of yours so far.
I scoffed somewhat when you said you couldn't do the welding on the exhaust to a high enough standard. Then I saw what Forrest produced. You were quite correct. The skills that some folks possess is just beyond comprehension. What a beautiful result.
Talk about a video chuck full of “shapes”… wow. Only true artists with OCD could engineer and produce that exhaust system… and I cannot imagine the cost. Fascinating project. Thank you, Sarah. 👍👍👍
It’s always a treat to see a true craftsman at work. The amount of thought that you both dedicated to the design and build really matches the care and effort Sarah put into this build. I really love this car. ❤
the overall fitment and quality of this rebuild is amazing. Sarah your attention to detail surpasses many a "Engineer" or "Designer's skills and or qualifications, you are amazing .......... Kido's and well done
Sarah, this car is gonna be SO BAD ASS!!!! I WANT THIS CAR! You have done a masterclass on this restomod. This is how it’s done. You go girl! Keep kicking ass 👍🏻
Love seeing a master of his craft. Forest is an exceptional welder. The oil pan Charlie came up with is awesome as usual. I’m gonna be kinda sad when this build is over.
This is one of the most impeccably built projects I have ever witnessed. The attention to detail and quality of the build, the attention to detail: they are truly mind blowing. Thank you for sharing and all your hard work, along with everyone that has helping you along the way. Amazing to watch.
That exhaust IS a work of art!! Very nice. The iterative process of designing an air box for the car is really cool, too. Thank you for another cool episode!!
Forrest is literally a Rocket Surgeon. I usually say this as a joke - but for him it 100% applies. Always the last 10% that ends up kicking your butt in a project. Nice to see this coming together.
I really enjoy seeing high quality metal fabrication. It truly is artwork. I just noticed you're right at 700K subscribers - congrats! Well deserved Sarah.
That exhaust is a work of art and should be hanging in an art gallery. So should your Celica! I can’t wait to see the finished product but I’m loving watching the process, thank you for sharing it with us.
Before I watch the video, just a comment. I see you're on 699K subs. Lets hope for 700K before the end of November. I know you've said, that you seem to have reached a ceiling, but here's hoping for a million subs.
This car needs to not only win multiple sema awards but a gran turismo award as well, its such a mind blowing, beautiful construction. Sarah you're building a masterpiece and I cannot wait to see your review of it once you're done!!! Forrest your construction of that exhaust was absolutely exquisite and those welds are literal fusions. Amazing work, this car is now going to sound even more insane!
That view from underneath the vehicle is super impressive Sarah! I still can't believe the amount of design and work you've put into a car which I used to work on regularly in the 80's at the dealership and never gave much of a thought to.
You have no idea how great it is to have this channel to point to when all that rah-rah-rah on the hill pipes up. You're putting in _work_ by just constantly smashing car stuff (in the "Wildest of Wests no doubt). Stay up!
Just like you said “It’s definitely a work of art”. The pay attention to details is outstanding. Can wait to see that “Monster Beast” driven. GBY and your love ones. Respectfully John🇵🇷
I begged Donut, HIGH CAR LOW CAR, to do this!!! They even admitted they just bought one, because they didn't feel like doing it!!! THANK YOU!!!!!!🎉🎉🎉🎉🎉🎉
The quality of that exhaust is straight mind blowing.
Whatever you paid Forrest, it was WORTH IT. That exhaust system is a work of art.
Would be nice to know price.
@@tommorgan1291For that level of skill a pretty penny.
@@IronmanV5 titanium tubing alone is very expensive! Got to love it.
I have never seen welds that perfect. Necessary for Aerospace. An absolute artist.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏
Tell us more about your new friend Sara!
Literally the best welds I have ever seen
@@Synthwave89 Yea, in Aerospace the welds have to be virtually invisible. Any irregularity or bump is a friction point that will heat up on re-entry. Something you want to avoid.
Anybody that says "I know my limitations" has my highest respect, very few people will admit to that. Sarah is one honest person........
This feels like a higher level, Sarah. I hope that there are former Toyota engineers watching your work. You make the absolute best content of this type on this platform. Please make sure to rest (we'll wait) but don't stop.
So true girl!
It would be cool to see them invite her out to Toyota-chō for a tour.
!!!!
So cool! And Forrest is an artist!!
It's a thing of beauty. And i bet Forrest was happy to have someone who appreciates his attention to detail and cleanliness. :)
Two people who value doing quality work teaming up on a project means it is going to be fantastic
You were whistling SEVEN NATION ARMY by the White Stripes!
I for one didn't hear ANYTHING copyrighted.
@overmonk Whistling for 3 seconds doesn't constitute copyright.
I thought they got rid of copyright you can use music now?
Nope it was Dan Hartal's 'Honey-Money '
I heard "Norwegian Wood".
Wow. That is the highest quality welding craftsmanship I've ever seen.
The whole car is a masterpeice.
SEMA quality
When you get an actual rocket surgeon on the project... Holy Schnikes that is fantastic!
Having custom exhaust built is truly a dying art. I ran/ worked in a custom shop for over 20 years. Built hundreds of one off systems. The quality of this man's work is definitely top tier. And to have a system built to that caliber with those materials is way beyond what the average consumer is expecting to pay. You certainly picked the right person to build that exhaust Sarah. Well done.
Resonator and cat delete it was perrrfect
Full marks for bringing Forrest. And he gets uber bonus points for "I hate pie cuts" (assuming he's not talking about pies......).
I have to rewatch this vid a few more times..........so much wonderful detail.
As you said Sarah......this exhaust system is a work of art........👍 to Mr. Forrest.
Hats off to those BBQ guys.
Thanks to Charlie for stepping in.
It takes a village :>
😁👌
Those welds are amazing. That has got to be the highest quality custom exhaust I have ever seen. Fantastic work.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏..
Fabricate. Our favorite word once we accept that it takes time, patience and skill. Plus tools.
That welding is truly artful, you are so lucky to have him available to do that work. Great video, love that attention to detail.
Wow ! That looks gorgeous!
I hope you're bringing this beauty to SEMA 2025 Sarah.
SEMA exposure would most likely boost subscribers!
SpaceX hires welders with Godlike abilities.... your exhaust is nothing short of perfection!!!!
I know nothing about welding but damn, that is the best looking exhaust i've ever seen.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏..
Forrest did an amazing job on that exhaust system. Having worked in the aerospace industry for several decades, it's easy to see where his attention to detail comes from. Kudos to Charlie on the execution of the oil pan mod to clear the front sway bar.
Master Welder Forrest and Sarah collaborated to produce one of the top world class exhaust systems available on the planet. The cost of which is four times the initial retail cost of this little toy bubble. Money well spent.
That exhaust is a masterpiece, a true piece of art. That little car is going to be a blast to drive.
“You want to jump on it again?’ Made my day. That and the sweet exhaust is as perfect as you will get. Forrest can weld.
Art. Automotive art. You will have one lovely car, one you can be proud of for the rest of your days.
Looking forward to your next t-shirt, with a picture of a propane torch: "It's the solution to almost everything in life. If you can't do it, burn it until you can. I don't know if that's actually something that you should live by, but it worked in this instance."
What an amazing exhaust, and Charlie Engineeracoblers work on that oil pan is just pure genius!!!
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏...
What a lovely cap to my day!
Just found out that a year’s worth of work and two years of planning came to fruition. I’m a violin maker and just found out that I was awarded certificates of tone for a quartet and a viola I made in an international competition.
This video was a cherry on top!
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏..
Very envious of those welds. My mantra is: A grinder and paint make me the welder I ain't.
Durometer rating, just like on my roller skate wheels from the 70s!
I can’t stop 🛑, Sarah you always make jokes and here I go, “Sarah do you want to jump on it again” says the SpaceX welder. Just too funny, then watching you do it with such enthusiasm. This was my favorite video of yours so far.
Ok now we're talking. This is beautiful. Can't wait to hear what it sounds coupled with the V8. This car is going to be absolutely incredible.
When you talk about exhaust tips, you make car nerds look like normal people 😂😂😂
And it's bloody fantastic 🙂
To see Sarah stand in the trunk and jump up and down made my day
I scoffed somewhat when you said you couldn't do the welding on the exhaust to a high enough standard. Then I saw what Forrest produced. You were quite correct. The skills that some folks possess is just beyond comprehension. What a beautiful result.
I would rather buy a car built by you than a modern manufacturer. It's really enjoyable watching how much you care about each step of this build.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏.
Excellent! I enjoyed seeing the exhaust taking shape.
Wow, your welder is a true artisan.
For the love of Saint Exhausto! This is the most beautiful exhaust system I've ever seen.
"Saint Exhausto" is the only Saint I pray to 😅
The welds on that exhaust are nicer than ones I've seen on titanium bicycles. The quality is mind-blowing. Forrest is a true artist.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏..
What a beautiful exhaust. Yeah, that's the kind of stuff that you must farm out.
Talk about a video chuck full of “shapes”… wow. Only true artists with OCD could engineer and produce that exhaust system… and I cannot imagine the cost. Fascinating project. Thank you, Sarah. 👍👍👍
Sarah, your videos are awesome! I love how detail-oriented you are about making sure everything works exactly as you intended. Thank you!
WELD, FORREST WEEELD!!
It’s always a treat to see a true craftsman at work. The amount of thought that you both dedicated to the design and build really matches the care and effort Sarah put into this build. I really love this car. ❤
the overall fitment and quality of this rebuild is amazing. Sarah your attention to detail surpasses many a "Engineer" or "Designer's skills and or qualifications, you are amazing .......... Kido's and well done
You were whistling Seven Nation Army by the White Stripes 😊❤
Loved this video !!, best looking exhaust I've ever seen...Sarah and her dream team !!.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏.
No, I didn’t find this RUclips channel by chance last week and binge watch almost all of her videos in the past six days no not at all😊
You weren't kidding when you said the exhaust system is a work of art!
That is some epic level welding
Wow that exhaust pipe system is incredible and the welds are awesome. Great work, can't wait to hear it.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏.
Sarah, this car is gonna be SO BAD ASS!!!! I WANT THIS CAR! You have done a masterclass on this restomod. This is how it’s done. You go girl! Keep kicking ass 👍🏻
Just the very greatest RUclips channel and content creator!
If the Celica is "rockin" don't worry about knockin, it's just Sarah jumping up and down in the trunk.......lol
Love seeing a master of his craft. Forest is an exceptional welder.
The oil pan Charlie came up with is awesome as usual.
I’m gonna be kinda sad when this build is over.
This is one of the most impeccably built projects I have ever witnessed. The attention to detail and quality of the build, the attention to detail: they are truly mind blowing. Thank you for sharing and all your hard work, along with everyone that has helping you along the way. Amazing to watch.
Ex-oust is premier! What beautiful work.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏...
This has truly been the most satisfying build show I’ve ever watched. Thank you so much Sarah.
This car as are all Sarah's projects are a work of art. Wow, just wow.
"extra attention to detail" is exactly what I've come to expect from this channel.
Many hands make awesome work!
That underbody is a work of art.
This project is a true work of art from Sarah and her team of Master Fabricators 👏
OMG, that exhaust is eye candy!!!🤪🤪🤪🤪
That exhaust IS a work of art!! Very nice. The iterative process of designing an air box for the car is really cool, too. Thank you for another cool episode!!
Forrest is literally a Rocket Surgeon. I usually say this as a joke - but for him it 100% applies. Always the last 10% that ends up kicking your butt in a project. Nice to see this coming together.
I really enjoy seeing high quality metal fabrication. It truly is artwork. I just noticed you're right at 700K subscribers - congrats! Well deserved Sarah.
That exhaust is a work of art and should be hanging in an art gallery. So should your Celica! I can’t wait to see the finished product but I’m loving watching the process, thank you for sharing it with us.
Alright, "if you can't do it, burn it until you can", is great line! Your delivery helped too. Great video as always.
Simply put, awesome!
Before I watch the video, just a comment. I see you're on 699K subs. Lets hope for 700K before the end of November. I know you've said, that you seem to have reached a ceiling, but here's hoping for a million subs.
Just when I feel overwhelmed with my 82 mustang I watch one of your videos and I’m encouraged to dive right back in! Thank you for awesome videos
Absolute work of art on the exhaust system
This car needs to not only win multiple sema awards but a gran turismo award as well, its such a mind blowing, beautiful construction. Sarah you're building a masterpiece and I cannot wait to see your review of it once you're done!!!
Forrest your construction of that exhaust was absolutely exquisite and those welds are literal fusions. Amazing work, this car is now going to sound even more insane!
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏...
That view from underneath the vehicle is super impressive Sarah! I still can't believe the amount of design and work you've put into a car which I used to work on regularly in the 80's at the dealership and never gave much of a thought to.
This thing is a beast. What a beautiful car you’ve created. Excellent.
Bring back the rubber tipped finger pointer thing and sound FX!
You are so lucky to have the decades of fabrication expertise support.
There is nothing more beautiful in this world than a beautiful princess talking about beautiful cars!
u have amazing carboard crafting skills i bow down to the great one :)
This will be the best UZ converted Celica period.
That exhaust!! A thing of beauty!! Forest is a true artist.
The level of detail on this project. Keeps getting better and better. :-)
The exhaust is just a work of art 🔥 🔥 🔥
The underside shot of the car near the end of the video. Absolutely mint.
You have no idea how great it is to have this channel to point to when all that rah-rah-rah on the hill pipes up. You're putting in _work_ by just constantly smashing car stuff (in the "Wildest of Wests no doubt). Stay up!
Just like you said “It’s definitely a work of art”. The pay attention to details is outstanding. Can wait to see that “Monster Beast” driven. GBY and your love ones. Respectfully John🇵🇷
I can't wait to hear this V8 run.😀
If you're able to change from "just a hair clearance" to "just a hare clearance, you'll be fine".
Beautiful exhaust, a true master.
Those welds were almost as mind blowing as the perfect cardboard filter box! Sarah is the queen of cardboard prototyping (and robot jokes)!
Beautiful work.... So Excited for the first drive! 👍🏻
So many car builds going on RUclips, this is one of my favorite.
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏...
Gotcha... Seven Nation Army .. Sarah
That welding quality is insane!!!!
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏...
Love it when Charley shows up!
I begged Donut, HIGH CAR LOW CAR, to do this!!!
They even admitted they just bought one, because they didn't feel like doing it!!!
THANK YOU!!!!!!🎉🎉🎉🎉🎉🎉
Sarah, you are creating a masterpiece, a work of art. I really admire the quality you put into every part of this build!!
Some $ for that sweet exhaust. Forrest deserves massive respect for that exhaust, so clean just like the rest of your build.
Aloha Miss Sarah. Thank you for ending my week on a high note.
808 in the house?
I'm in Town😮
@@3dandyrandy3 Mauka Haiku
I have never seen a weld like that , like perfection to the extreme. It's like a bead of caulking, just wow.
I have never enjoyed a build series this much. Must be your OCD attention to detail that keeps me coming back.
When it comes to electronics and metal, Cleanliness IS Godliness!
𝑰 𝒘𝒐𝒖𝒍𝒅 𝒑𝒓𝒆𝒇𝒆𝒓 𝒊𝒇 𝒘𝒆 𝒉𝒂𝒗𝒆 𝒑𝒓𝒊𝒗𝒂𝒕𝒆 𝒅𝒊𝒔𝒄𝒖-𝒔𝒔𝒊𝒐𝒏..
That exhaust turned out amazing.
MMm the beauty in organic design in metal and fire... lovely.