Darth Vader Voice Changer - costume voice changer for helmet mask
HTML-код
- Опубликовано: 11 июл 2024
- Costume Voice Changer to use in your helmet, mask, or under your armor.
Cheap and easy cosplay Voice Changer. Integrate this with your microphone and voice amplifier to get a genuine Darth Vader voice, reminiscent of Star Wars.
=====
- i9 Voice Changer is an inexpensive option with a lot of uses at around $25.
- I recommend a using this with a Moukey Va-1 because they are small when gutted and fit into helmets easily.
ABOUT MY VADER HELMET MODS: I built an Amp into the helmet; it has built-in breathing on a TF card - see that video here: • Voice amp for Darth Va...
====
MY REVIEWS & INSIGHTS:
- This voice changer works fairly well. And should be a core go-to for inexpensive voice changing capabilities for costume integration, gaming, etc.
- They designed it to integrate with various devices, including your phone, Xbox, PlayStation etc.
- It’s Far superior to the Halloween store voice changers. Any of those I’ve tried had limited features, and were mostly indecipherable.
====
For other uses of the I-9 Voice Changer, see the video series links below.
---
BUY STUFF
- i9 Voice Changer: amzn.to/3Uj24WE
- 3.5mm audio cable with splitter/combiner $8.99 (female mic + female headphones to Male TRRS): amzn.to/3SFTznu
- Moukey VA-1 Voice Amplifier: rebelempiredesigns.etsy.com/l...
---
OTHER i9 VIDEOS:
- Part 1: Voice Changing Demo: • i9 Voice Changer PART ...
- Part 2: Mic+Music & volume control: • i9 Voice Changer Part ...
- Part 3: Gut it for costume embed: • Voice changer for Cosp...
- Part 4: Gaming System Integration: • i9 Voice Changer Pt 4:...
- Use for a Trooper: • Easy Stormtrooper Voic...
(Short: • Easy Stormtrooper Voic... )
- Use for a Mandalorian: • Easy Mandalorian Voice...
(Short: • Easy Mandalorian Voice... )
- Use for a Darth Vader/Kylo Ren: • Darth Vader Voice Chan...
(Short: • Darth Vader Voice Chan... )
---
HOW TO CONNECT DEVICES:
- TO OUTPUT TO AN AMPLIFIER/SPEAKER: A dedicated Mic goes in the "mic" port on top & an amplified speaker goes into “headset” port on bottom. For the speaker you must use a TRRS cable - those are the types if cables that came with the i9 (3 plastic separators & 4 metal sections on the 3.5 mm tip).
- TO OUTPUT TO A PHONE OR GAME SYSTEM:
- FOR A 3.5MM HEADSET (headphones + mic combo) - plug into the “Headset” port on bottom; & plug your Phone, game console, or other 2 way devices into “Live1” or “Live2” ports on top using the i9 provided TRRS 3.5mm cable. (Note if your headset has 2 separate plugs for mic & headphones, connect it to a splitter/combiner designed for combining the 2 - it has 2 female 3.5 connectors and merge to a single TRRS male pin. Then put that pin into the headset jack.)
- FOR A USB HEADSET - use a USB to 3.5mm converter - if your converter splits into mic and headphones then you’ll also need a male mic and male headphones to a single TRRS 3.mm male converter cable.
- note for iPhones/iPads - you’ll need an iPhone to 3.5mm female converter to connect to your 3.5mm TRRS line that goes into the “Live” port.
---
FEATURES:
【8 Kinds of Sound Changes】With 8 kinds of different sound changes, that is man to woman, woman to man, normal, lolita, baby, youth, king, witch. You can also use the fine tune button to adjust each sound for more different sounds. Perfect for chatting with friends and entertainment, voice change for on line games, etc.
【8 Built In Sound Effects】Comes with 8 entertaining sound effects, just press the button for each sound to get interesting sound effects, that is applause, kiss, laughter, delight, surprise, fright, crow and time. The LED lights of the phone sound changer, which has a separate button to control.
【Portable】The sound changer is small in size, light in weight, easy to carry, plug and play without installing any drive program. Just connect the sound converter to another device, and then your sound will be changed. It is perfect for indoor and outdoor use.
【Compatible】The game live sound card is compatible for any mobile phone, computer, tablet, for IOS, for Android, and any game platform. To use a voice charger on a PC, you need an adapter. The interface of the sound changer is 3.5mm, i.e. 0.14in, but the interface conversion cable needs to be purchased separately for IOS.
【Multifunctional】You can connect the mini sound card to your other devices and disguise your voice.
AutoTune Audio av DIY Costume Mask Helmet SpecialEffects Star wars Batman Darth Vader Robot Female Male pitch correction Tune Reverb Echo SoundEffects Gift Best New Custom Electronics mic Microphone Amplifier Speaker rap studio mando mandalorian voice voiceover karaoke vocal vocals Gaming PS4 PS5 iOS Phone Device iphone
#VoiceChanger #amp #starwars #Cosplay #darthvader 
Хобби
What speaker do you use to project your voice so that others can hear it?
What microphone and speaker should i use for this? Do they need to be wired or can they blue tooth connect? Ive never used anything like this before sorry if im dumb
Male voice would be a good kylo when he wearing the mask.
For sure
Awesome bro. Thanks for the link. 🙂
No problem 👍
Hey do you also sell these voice changer helmet with everything installed, i can buy from you
if your voice is more feminine, how would you recommend having the settings? I tried the same setup and I cant manage to get the voice to sound quite right. it sounds too high.
It’s cool, but a guitar peddle such as a Zoom Multistomp will do you much more justice. I have some videos I’ve upload over the time. You’ll find it sounding a bit more like Vader.
Then there’s also the annunciation of James Earl Jones us Vaders work/practice doing. That’ll definitely add the Vader voice to sound authentic.
CanadianVader - what's up man. I've seen some of your stuff - good content my friend.
1. Zoom Multistomp - yea, for sure. I've got a multistomp myself - although in testing out different devices I'm always on the lookout for alternatives - especially for the folks that can't / won't shell out for a multistomp.
2. James Earl Jones voice - yea, there's no device that will make anyone talk like him...only good imitation of his style. true.
I'm fortunate that I can pull him off with an amp alone, although it does miss out on some effects, but most folks don't notice. Despite having a multistomp, I'm turned off by the logistics of carrying it, wiring, etc. so my personal preference is for something fully contained in the helmet - so my go to is actually one of my black series with with built-in mic/amp setups. (e.g.ruclips.net/user/shorts2RWP1sToiG0).
Perhaps my EFX build out will finally incorporate my multistomp in the mix. TBD.
Cheers.
how do you put it all together in terms of what goes where
Can you tell us how to sound like general grievous from rots
I’d use either tthe DSP 99 ruclips.net/video/CEZ4J55W1zI/видео.htmlsi=l1uEUqkhV8Woa5h2
or something like a Zoom Multistomp.
1. Pitch Shifter: General Grievous’ voice has a slightly lower pitch with a mechanical tone. Use the pitch shifter to lower your voice by a few semitones. Start with about -2 to -3 semitones as a baseline and adjust to taste.
2. Distortion or Bitcrusher: To achieve the raspy, gritty texture of Grievous’ voice, apply a bit of distortion or a bitcrusher effect. This will help mimic the metallic and mechanical characteristics.
3. Delay: A short delay will add depth and a robotic echo to the voice, similar to Grievous’ multi-tonal and reverberating speech. Set the delay time to around 80-150 ms with a low feedback setting.
4. Reverb: A small amount of reverb will expand the voice’s spatial qualities without making it sound too distant. Opt for a small room setting with a short decay.
5. EQ Settings: Boost the lower mids to enhance the raspy quality while slightly cutting the highs and boosting the lows a little to round out the voice.
Would it be possible to do Kylo Ren from TFA with this voice changer?
Sure. There are a variety of LOW voice options to choose from. Use Female to Male to make your voice anywhere from slightly deeper to Uber-gravelly deep. Alternatively Cartoon and Robot are also uniquely deep with a tinge of uniqueness. Between all those options one should be what you need to become Kylo Ren.
Check out the longer review of the i9 to see if that help you decide if it’s for you. i9 Voice Changer PART 1: Features Demo -reverb, pitch, sound effects. Mandalorian #starwars #Cosplay
ruclips.net/video/BN7Dydsqry4/видео.html
Hello one the questions I have the same voice modifier but I can't get it to work. I don't know if you can help me.
It’s important you use the i9 cables (they’re TRRS) and connect them as I write in the description. If you connect them differently, you’ll likely hear nothing come from your speakers.
Did you use any specific way to connect it to your speaker? Mine isn’t connecting right for some reason
+Triz First ensure you have an amplified speaker ( a personal amp or even a portable Bluetooth speaker that has a 3.5mm input work fine), Next - for hookup - I plugged the mic into MIC port, then my audio output to my speaker came out of the HEADSET port.
How long does the i-9 stay charged with a full charge
Several hours. I’ve not used it more than a couple hours at a time and hardly ever have to charge it. My understanding is it’s full time is around five hours give or take depending on usage.
can i plug it into any speaker that supports aux?
only those with powered amps - essentially if the speaker plugs in or has a battery - it should work.
Can I connect this to a portable amplifier?
Yes, that’s how I did it in the video using the portable amp I embedded in the helmet.
How do u have the breathing sound
I built an Amp into the helmet and that amp has built in breathing on a TF card - see that video here: ruclips.net/user/shorts2RWP1sToiG0?si=qfM9lQuYn2TjXKU6
In it I use a Moukey amp: rebelempiredesigns.etsy.com/listing/1604606998
how to do connect up everything like where goes where?
Info is in the description but here I is:
HOW TO CONNECT DEVICES:
- TO OUTPUT TO AN AMPLIFIER/SPEAKER: A dedicated Mic goes in the "mic" port on top & an amplified speaker goes into “headset” port on bottom. For the speaker you must use a TRRS cable - those are the types if cables that came with the i9 (3 plastic separators & 4 metal sections on the 3.5 mm tip).
- TO OUTPUT TO A PHONE OR GAME SYSTEM:
- FOR A 3.5MM HEADSET (headphones + mic combo) - plug into the “Headset” port on bottom; & plug your Phone, game console, or other 2 way devices into “Live1” or “Live2” ports on top using the i9 provided TRRS 3.5mm cable. (Note if your headset has 2 separate plugs for mic & headphones, connect it to a splitter/combiner designed for combining the 2 - it has 2 female 3.5 connectors and merge to a single TRRS male pin. Then put that pin into the headset jack.)
- FOR A USB HEADSET - use a USB to 3.5mm converter - if your converter splits into mic and headphones then you’ll also need a male mic and male headphones to a single TRRS 3.mm male converter cable.
- note for iPhones/iPads - you’ll need an iPhone to 3.5mm female converter to connect to your 3.5mm TRRS line that goes into the “Live” port.
Hi, that link takes me strait to an i9 computer?
+@someadvids5655 thanks for the heads up. used to work - now not so much - I’ve updated the links in the descriptions. (BUY IT HERE: amzn.to/3Ua1ASI)
Thanks again.
Can this work for a wrench mask?
i9 could work - but is not the best option for Wrench. Using "DJ" or something with mild reverb can be similar. (Note: Robot sounds nothing like a robot, unless you consider Cybermen from Dr Who - which is very deep and nothing like Wrench. )- Here's the full i9 video of all its sounds: ruclips.net/video/BN7Dydsqry4/видео.html.
Maybe "Phonograph" on the K9 Voice Changer could work - ruclips.net/video/fq0E49NYM2s/видео.html
--->>> Best Option - would be the DSP 99 board - it can definitely work - although it's a bit more complex to setup - ruclips.net/video/CEZ4J55W1zI/видео.html
@@creative-stuff thanks
Do you have to buy a mic and speaker output separately?
You need both a mic and an external amp with speaker to use the i9 voice changer. Here is what I integrate it with - a personal amp that I gut and integrate into a helmet: ruclips.net/video/0fAGJK9jco4/видео.html -- that one is a small and fit well in helmets. Check amazon and walmart.com to see if you can find it there, if not I just bought a bulk load of them I may be selling soon.
bty hands