Same, I'm planning on a build and am doing a lot of research such as obscure videos like this one to see what other people have accomplished. Pretty much all I'm going for is Tamiya's 51340 Nissan GT-R (R35) body and getting a chassis and electronic parts to match it.
Dan 351 the TT02 is a good cheap platform that can go fast pretty easy. There are heaps of parts available and even the good Tamiya hop ups are cheaper than what you would pay for an X-ray parts. There are much better platforms but for a good cheap start in 1/10 touring car the TT02 is good starting point. Check out the TT02RR.
Nice. Im about to put a robinson racing 49t spur and 45t pinion in mine with 3s 5900kv brushless and see what it does.lol. learned everything through you and kaizertestrc. Thanks
thank you for the video ... im trying to make my tt02 fast ... im running the 68t tamiya spur and the stock 22 t pinion .. on a 4000kv motor .. seems pretty fast already ..
Your video really helped me understand a lot more. I purchased the 68T Tamiya HS Spur and 2 sets of Pinions. Ranging from 19-29T. 68 sour and a 27T pinion. On a brushless 2s. How fast am I expecting you thinking?
There are many factors that go into speed so I wouldn’t be able to work that out. Most of the fun is getting out and trying it and seeing how it goes. Then making changes to go faster
Dear Stew, Love your videos! Thank you for sharing your knowledge, very much appreciated. I have ordered the Yeah Racing adjustable motor mount and the Tamiya High-Speed Gear Set. What 48DP gears would you recommend with the Castle 6900kv 1410 (thank you for the recommendation !) ? Are you still using Castle motors or do you use TP motors ? Cheers
I have a car I’m trying to Setup to set records, it’s rwd when I get a new drive belt , what do you think about using a pinion that is 17 teeth bigger then stock (41 teeth) (87 tooth spur) , everything is pretty much stock but stock it’s carbon fiber ect , I’m also looking at a 69 tooth spur from the car this is a knock off of
i would recomment even making a ducttapped cover on that machined area or even a paper cover, because i have lost heard from random asphalt rocks that have flown into the gears and broken them intirely
Cool, I picked up a TT02R that had been used on 3s,it had melted the output bearing (the cover and chassis where you'd machined away the top for clearance), just wondered if you'd had the same issue. I bought a new chassis and cover for it,seems like these chassis aren't that well adapted for high speed,or maybe the previous owner had been doing donuts on 3s non stop,who knows....
@@philthyco1 I've been racing and building R/C cars for more than 40 years. Putting a metal bearing into a plastic housing and then over heating it isn't good engineering practice. But thank you for your insult nontheless...I didn't build it, I bought after someone else had,and screwed up,and was just trying to pass on some info in case you had the same issue. I'll keep quiet in future.
Sorry I didn’t see this comment earlier. I have never melted any part of my cars. I use really good quality bearing and clean out the grease and oil them. I also service them regularly.
I haven’t tried any speed runs with my tt02 yet because I’m still upgrading it so far it’s almost entirely aluminium on have the front and rear bottom arms the gearbox outdrive axels and the front wheel axels to get in aluminium then it’s done for that. I’m going to switch it to brushless as it’s using a 7.4v nimh with the stock torque tuned motor but I’m going to take it to a 3s lipo with a absima thrust bl eco or hobby wing just stock 3650sd brushless motor not sure but I need help with the gearing as I want the fastest gearing combo but don’t know how to get it
AfaqH it’s hard to just give you a number. As you can see I have heaps of gears and what’s in the video in only a small part. The only way is to start with a final drive of 5.5 and work down.
Hi! great video! How about the quality of the tt02 chassis? I am between this chassis and the kyosho fazer mk2..because both have 2 differentials, but I don't know which one will have more resistance and longevity, which of the 2 will resist, more speed, without damaging, differentials, gears, arrows ... greetings and a strong hug!
Gearing is not really a one shot deal. I basically use a different gear combo any time I test. It’s been a long time since I played with the TT02 and can’t remember what gears fit.
I just put the 68 spur and 33 pinion on my tto2 what sort of speed do you think it will do? I may convert to the 48 pitch for a smaller spur if it’s not fastenough
@@StewMac570very true. Ile just have to give it a rip to see what it can do. I am running a hpi racing flux 4000kv motor and hobby wing 3s esc and 3s lipo with the standard cosworth body so will be happy to see 50mph
Milton Marone no prob. You can get steel gears from GPM or use the alloy gears from the DF01 gravel hound. The new type RR has harder plastic diffs with alloy internal gears. I have tried them all and the plastic gears with the alloy locks worked well for me. Also depends on power. I only used 3s on the plastic gears.
Hi there and great video. I’ve got 2 TT01’s on 3racing chassis’s . I wondered if I can do as you and go up to a 48 teeth pinion? I want to do speed runs myself. Pls help. Thanks.
itsnotfairmate hi mate. The TT01 is limited to Tamiya mod 0.6 gears. You can get different Spurs I think to 55t. And bigger pinions. But you are not able to change to 48p
Stew- Mac thanks for the reply. That’s unfortunate but I understand. I’ve got the 55t spur and the highest pinion also in the cars, so I guess that’s the best I can do. Thanks so much for the help once again and keep up the great videos. 😄
Stew- Mac I’ve got a 7700 castle creation set up and 2s lipo’s and it’s definitely very quick when I’m bashing (never did a speed test yet) but saw your gearing set up and was really blown away. I’ll now as you said look into bigger 2s batteries. Thanks.
Kaizer Test touring car is 1/10 racing. So proper RC race cars like X-ray team associated, yokomo and the like. The are pretty common if you look for the right stuff. Most major stores carry those types of gears.
@@StewMac570 Ive been looking. I'm just not sure which diameter the center hole is. I see some with small hole and some with bigger hole in the center.
TMM I run locked diffs front and rear. Shocks I was the TRF shocks with 3 hole pistons and 800cst oil. Then you need to 2deg toe in on the rear and 2deg toe out on the front.
@@StewMac570 Sweet. I could never work out if a locked rear diff helped or hindered stability. I think my biggest problem is needing foam tyres or belted rubber tyres as my car starts to wander at 100kmh.
Are these suitable for speed run's ? Are you using fronts front and rear ? Thanks 👍 www.rccarshop.co.uk/wheels-tyres/1-10-touring-car/j13273-contact-foam-1-10-front-26mm-32sh-jap-carbon-p
Развлечения
Great information, amazing what you do with these little Tt02s . This will be getting me into it for sure. Thanks mate .
Same, I'm planning on a build and am doing a lot of research such as obscure videos like this one to see what other people have accomplished. Pretty much all I'm going for is Tamiya's 51340 Nissan GT-R (R35) body and getting a chassis and electronic parts to match it.
Very nice bro..You are the Tamiya speed run king!
Really useful information in this. Thanks for sharing
This is an awesome video man 👌 I'm getting interested in building one of these now
Dan 351 the TT02 is a good cheap platform that can go fast pretty easy. There are heaps of parts available and even the good Tamiya hop ups are cheaper than what you would pay for an X-ray parts.
There are much better platforms but for a good cheap start in 1/10 touring car the TT02 is good starting point.
Check out the TT02RR.
Dan 351 www.rcmart.com/tamiya-47382-tt02rr-chassis-p-80661.html?cPath=420_1182
Within 3 days I had the RR doing 100mph with about $130 worth if electronics.
Thanks mate very informative 👌 this might be the next platform for me I'll check it out
Thank you for sharing your tips keep it up
Nice. Im about to put a robinson racing 49t spur and 45t pinion in mine with 3s 5900kv brushless and see what it does.lol. learned everything through you and kaizertestrc. Thanks
Glad I was able to help out. Good luck.
Great tips
thank you for the video ... im trying to make my tt02 fast ... im running the 68t tamiya spur and the stock 22 t pinion .. on a 4000kv motor .. seems pretty fast already ..
John Handcock happy to help.
Gearing is where you can make big gains in speeds
Spur to big and pinion to small mate! You can go much faster changing that up
Your video really helped me understand a lot more. I purchased the 68T Tamiya HS Spur and 2 sets of Pinions. Ranging from 19-29T. 68 sour and a 27T pinion. On a brushless 2s. How fast am I expecting you thinking?
There are many factors that go into speed so I wouldn’t be able to work that out.
Most of the fun is getting out and trying it and seeing how it goes. Then making changes to go faster
Dear Stew,
Love your videos! Thank you for sharing your knowledge, very much appreciated.
I have ordered the Yeah Racing adjustable motor mount and the Tamiya High-Speed Gear Set.
What 48DP gears would you recommend with the Castle 6900kv 1410 (thank you for the recommendation !) ?
Are you still using Castle motors or do you use TP motors ?
Cheers
I use Robinson racing 48p gears
I run a mix of motor. What ever I think will work best
@@StewMac570 Thank you Stew !
Very cool model, thank u for the video! Can i answer u what tipe of suspension arm have u used on this model? I have never seen it on a tt02 model
I’m using the TT02 type S suspension
I have a car I’m trying to Setup to set records, it’s rwd when I get a new drive belt , what do you think about using a pinion that is 17 teeth bigger then stock (41 teeth) (87 tooth spur) , everything is pretty much stock but stock it’s carbon fiber ect , I’m also looking at a 69 tooth spur from the car this is a knock off of
Hello can I ask what motor and esc combo you use on this ? I brought cheap and with the gearing your saying I get terrible cogging
Thanks Benny
hi bro how to use spec penion+spur in body tt02 thank you.
i would recomment even making a ducttapped cover on that machined area or even a paper cover, because i have lost heard from random asphalt rocks that have flown into the gears and broken them intirely
Cool, I picked up a TT02R that had been used on 3s,it had melted the output bearing (the cover and chassis where you'd machined away the top for clearance), just wondered if you'd had the same issue. I bought a new chassis and cover for it,seems like these chassis aren't that well adapted for high speed,or maybe the previous owner had been doing donuts on 3s non stop,who knows....
Lol...They handle 4s ..You probably don't know how to build or whoever built it messed up 😂
@@philthyco1 I've been racing and building R/C cars for more than 40 years. Putting a metal bearing into a plastic housing and then over heating it isn't good engineering practice. But thank you for your insult nontheless...I didn't build it, I bought after someone else had,and screwed up,and was just trying to pass on some info in case you had the same issue. I'll keep quiet in future.
Sorry I didn’t see this comment earlier.
I have never melted any part of my cars. I use really good quality bearing and clean out the grease and oil them. I also service them regularly.
I can't find any websites that carry low teeth spur gears that are 48p, can you send me some links to some spur gears you recommend.
I haven’t tried any speed runs with my tt02 yet because I’m still upgrading it so far it’s almost entirely aluminium on have the front and rear bottom arms the gearbox outdrive axels and the front wheel axels to get in aluminium then it’s done for that. I’m going to switch it to brushless as it’s using a 7.4v nimh with the stock torque tuned motor but I’m going to take it to a 3s lipo with a absima thrust bl eco or hobby wing just stock 3650sd brushless motor not sure but I need help with the gearing as I want the fastest gearing combo but don’t know how to get it
AfaqH gearing is not a simple use this combo and you will be fast. Gearing is about working what works for your setup.
Stew- Mac wait which spur and pinion
AfaqH it’s hard to just give you a number. As you can see I have heaps of gears and what’s in the video in only a small part. The only way is to start with a final drive of 5.5 and work down.
what tp motor is that and also if you could the specs
Hi! great video! How about the quality of the tt02 chassis? I am between this chassis and the kyosho fazer mk2..because both have 2 differentials, but I don't know which one will have more resistance and longevity, which of the 2 will resist, more speed, without damaging, differentials, gears, arrows ... greetings and a strong hug!
Awesome, you make me want to strip my drift built tt02 down and convert it to a speed machine, although might just buy a new kit
hughes2148 keep the drift car and build a new one. The RR is a great kit.
@@StewMac570 thanks dude will keep my eye out for one :)
hughes2148 RCMART is a great place to purchase them from.
What should I use with a 5700kv castle brushless pinion spur wise??
Gearing is not really a one shot deal. I basically use a different gear combo any time I test. It’s been a long time since I played with the TT02 and can’t remember what gears fit.
I just put the 68 spur and 33 pinion on my tto2 what sort of speed do you think it will do? I may convert to the 48 pitch for a smaller spur if it’s not fastenough
No idea what speed you will get as there are lots of other factors that come into play
@@StewMac570very true. Ile just have to give it a rip to see what it can do. I am running a hpi racing flux 4000kv motor and hobby wing 3s esc and 3s lipo with the standard cosworth body so will be happy to see 50mph
@@All-rc804 yeah with those numbers you should see 60.
Donde conseguiste las coronas
Did you change your plastic bevel G gears when upgrading your spur and pinion? Mine don't hold up when I speed race my tt02.
Milton Marone I have run plastics bevel gears up to 116mph.
The trick is not to power on so hard and use heaps of distance in the run.
@@StewMac570 Awesome! thanks for the info and replying!
Milton Marone no prob.
You can get steel gears from GPM or use the alloy gears from the DF01 gravel hound. The new type RR has harder plastic diffs with alloy internal gears.
I have tried them all and the plastic gears with the alloy locks worked well for me.
Also depends on power. I only used 3s on the plastic gears.
@@StewMac570 I drag race and I've been looking for stronger, longer lasting gears. Thanks man for all the info on the upgrades!
@@StewMac570 Do you have a Instagram account that you feature your builds on?
Where did you buy your 40t spur gear? Please link it if you can. By the way, I'm Japanese so I used Google Translation. I'm sorry if English is wrong.
these are the gears i use
www.robinsonracing.com/catalog/48pitchspur.html
then i search ebay for RRP 1860 for the parts.
18 is the type of gear and 60 is the number of teeth.
@@StewMac570 Thank you for your reply ❗️ We will refer to you!
@@StewMac570 I have a question. What is the 1860 gear used for?
the 1860 is a 60 tooth 48p gear used for the spur gear on the high speed gear set
Hi there and great video. I’ve got 2 TT01’s on 3racing chassis’s . I wondered if I can do as you and go up to a 48 teeth pinion? I want to do speed runs myself. Pls help. Thanks.
itsnotfairmate hi mate. The TT01 is limited to Tamiya mod 0.6 gears.
You can get different Spurs I think to 55t. And bigger pinions.
But you are not able to change to 48p
Stew- Mac thanks for the reply. That’s unfortunate but I understand. I’ve got the 55t spur and the highest pinion also in the cars, so I guess that’s the best I can do. Thanks so much for the help once again and keep up the great videos. 😄
itsnotfairmate yeah unfortunately the TT01 has a limitation in gearing. But you can over come that with a bigger motor and bigger battery.
Also thanks for the support. I will be taking the Typhon out next weekend and might give the TT02 another run.
Stew- Mac I’ve got a 7700 castle creation set up and 2s lipo’s and it’s definitely very quick when I’m bashing (never did a speed test yet) but saw your gearing set up and was really blown away. I’ll now as you said look into bigger 2s batteries. Thanks.
how abou the diferencial? have you change it?what you put?
Just the standard diffs with lockers
I got something up my sleeve
P.S. I am genuinely gunning for 80-MPH on 2s. I have an all fully aluminum TT-02RR.
That is huge pinion you say it is 48t where do you get it.
Brad Kalman
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F183894427677
What brands of spur gear will fit on that Tamiya spur adaptor?
Kaizer Test pretty much all touring car spur gears. I use Robison Racing. Rw Racing fit, 3 Racing will fit.
@@StewMac570 Touring car? Not as in Traxxas slash gears right? Like any 1/10 street car?
Kaizer Test touring car is 1/10 racing. So proper RC race cars like X-ray team associated, yokomo and the like. The are pretty common if you look for the right stuff. Most major stores carry those types of gears.
@@StewMac570 Ive been looking. I'm just not sure which diameter the center hole is. I see some with small hole and some with bigger hole in the center.
@@StewMac570 Ive been looking on amain hobbies. I cant seem to find a low tooth spur in 48 pitch that looks like it will fit.
what diff and suspension settings do you find important for high speed stability?
TMM I run locked diffs front and rear. Shocks I was the TRF shocks with 3 hole pistons and 800cst oil. Then you need to 2deg toe in on the rear and 2deg toe out on the front.
@@StewMac570 Sweet. I could never work out if a locked rear diff helped or hindered stability. I think my biggest problem is needing foam tyres or belted rubber tyres as my car starts to wander at 100kmh.
TMM good tires are a must. I run Ulti foams 38sh.
Locking the front diff is a must. The rear can be open but with thick oil or putty to limit is slip.
@@StewMac570 How do you lock the diff?
Kaizer Test there is are a few ways. Tamiya make a locker, yeah racing make one, or you could use silly putty or glue.
Link for the spur gear ?
www.robinsonracing.com/
Can you put links for the spur gears at all
www.robinsonracing.com/
www.ebay.com.au/itm/133329101943
Do you lock your diffs?
Yes
The diff is the same of the tc4?
Joseph Eliel no idea about a TC4. These are all Tamiya parts.
Ok thanks!!!
my tt02 easy to work on, i see why tamiya shits them out like some bad sushi, finially gave in, pinions gear ratios, btushed brushless
Are these suitable for speed run's ?
Are you using fronts front and rear ? Thanks 👍
www.rccarshop.co.uk/wheels-tyres/1-10-touring-car/j13273-contact-foam-1-10-front-26mm-32sh-jap-carbon-p
they are good but you need to look at a higher SH rating. they are only 32SH its best to use anything from 35 - 38 SH
Hey Stewart...thanks for all your help. Yesterday I got my TT02RR up to 80mph thanks to you...vid here...ruclips.net/video/l5BUQh2vPos/видео.html