@@WorldsWorstFishing thank you very much. I have really learned a lot watching your videos and I ordered my first mold a 7" Bape from StankX on your recommendation and I ordered the 5" Bape last night. I can't wait for all my color shift to get here. I found some 5g bags of Burple color shift on ebay for $3.00 and I'm going to Hobby Lobby tonight to get big jars of Mica pigment because I can't wait for UPS and I want to pour some now!
Can you do a video explaining why different plastics are better for different baits, why you would or wouldn't use salt, and whether you actually need scent to catch fish? I would like to get into bait making, but I am still in college and can't afford to buy $500 worth of supplies right now.
That would be helpful. Maybe you could also make a bait that usually uses soft plastic, but use harder plastic and see if the fish will bite it. You can call it an experiment to prove that soft plastic is better for some baits.
what size hypershift packets are you showing in the video at minute 2:18? It would have been nice to see the pigments mixed without the black (just clear plastisol) to see how it comes out.
Good job as always Chris....thanks for your time to teach us and for entertaining us during these times. I love the back to basics videos but these colorshift videos are sick! Thanks again and be safe.
how often do you have to mix to keep the plastic from burning or will it never go over 350 degrees? once it reaches 350, do you bring down the temp to prevent scorching? I guess the overall question is how likely is it to scorch/burn in this pot over a microwave? awesome video!
@@WorldsWorstFishing thank you for the replay, m8! If you ever want to sent some free baits to the netherlands, Let me know! Would love to try them out 😆
You should definitely try just the greens with the white pearls and just the purples mixed into some black for other batches I feel like they'd look amazing
You had my curiosity, now you have my attention. I've watched your channel for a few months now, and I want to get started in this. Do you have any suggestions on where I should start? Like what molds, whether it be a freehand or the injection molds
Hey hi love the videos I was wondering if you have or ever tried using some food condiments as additives for your lures such as some soy sauce , garlic powder chili powder etc.
Here is a tip I use to make two color worm tails. I shoot a squirt of Pam then take a small brush lightly brush spam on only one side of mold. The unbrushed side holds in place easely to cut and not have to replace tip of tail! Speeds up possess!
Hey Chris, there is a color science that if you mix Red, Blue and Green you get black. I'm thinking with a black base and all of the colors of pigment is why it came out maybe a little darker than expected. The color is cool still and it has it's place. I call this color "Aurora". I think you still did another outstanding job. ✌🏾
My buddy and I poured our first 7" StankX Bape the other night in green with red sparkles and he went and used it yesterday and the first fish he caught was a 6.8lb Bass. StankX makes a great mold.
Dude the purp and green shift is the beez kneez! However, I think the multi shift color will shine in the water under the sun. Sick color would be the pearl color for a belly...nordic and alien for lat line and the bada$ green(ztg?)with a touch of the orangy bronze color. Thanks again dude
I am not sure and definitely not as good as you but I think if the black wasn’t so bark ,if it was more like smoke the color would have showed up better
well you may be right...the black base is what the company recommends for higher saturation of the shifting colors...but mixing them all together def surpresses the effect.
You recommended that i use worm oil to help my injector work smoother, but I can't seem to find worm oil. Is there a specific brand that you use, and are their any other recommendations such as wd40
hello, greetings from colombia, i need 4 moulds from diferents baits, i have a cuestion! you shipping to colombia? you have for sale the materials from make the lures?, you have web site? thanksª
I found an ebay seller named oldsparkle55 and he has a lot of color shift and other colors pretty reasonably priced. I got 25g of purple pearl for like $9 and it is automotive grade powder.
I have a gallon of jerk bait plastics in the black bucket. An when I heat it up an it cools off it never hardens really it stays sticky an soft. What am I doing wrong.
Culd u do this again sometime but pour some each step, each set or individual powder added.......maybe with white or no pigment? I think the multi affect was lost in video translation. Think maybe step by step would help us see the layers and would be awesome to see each step individually.
Got another question for ya man! I've seen some peoples baits some out cloudy, is that the plastic type causing that, or the heat I've seen people heat set baits to get a sheen back. It's not like yours though. Always love seeing you experiment brother! be safe out there
Would be cool to see if there's a visual difference between mixing the pigments into black and pouring a clear skin with the pigment in it, then filling the body up with black.
What would it look like if u didn't add pigment dye (clear plastic only) and used all the color shifts? Might be a clear water killer. U should try mixing some in clear fingernail polish and painting it over a hard bait to see the effect.
Out of curiosity, when you mixed the pigments in at the beginning (around the 6:30 mark or so) and you get that super cook spidering and swirling pattern...if you were to lightly mix it and inject it, would you get striping in the baits?
Hey I have been watching your videos for a while and I wanted to start making my own baits but I don’t have the money for the supplies but anyway I was wondering if you could send me some baits to try
I guess if you have the resource to do something like that, cool. But that was enough pigments for a guy like me to run for a whole year and get all kinds of different effects.
@@WorldsWorstFishing 🚀; is that huge; 🌭, get your sausage! Oh look at that giant; 🐓, those are some massive;⚾⚾, it's going, going, look at that;🐍.... All the movie are hilarious! It all about the "🔨" timing
![Who Wrote a Short Story That Seriously Disturbed a Teacher? | Dirty Laundry x Smosh [Full Episode]](http://i.ytimg.com/vi/bvHAy_rKoEI/mqdefault.jpg)
Be sure to stay for the Bonus Baits at the end!!!!
Is there something I can dip my 7" Bapes in after I pour them to keep them shiney and not going dull and cloudy?
I just bought all different kinds of color shift pigment powders and ghost pearls to make 7" Bapes.
just dip them in clear plastic
@@WorldsWorstFishing thank you very much. I have really learned a lot watching your videos and I ordered my first mold a 7" Bape from StankX on your recommendation and I ordered the 5" Bape last night. I can't wait for all my color shift to get here. I found some 5g bags of Burple color shift on ebay for $3.00 and I'm going to Hobby Lobby tonight to get big jars of Mica pigment because I can't wait for UPS and I want to pour some now!
You should make sqirrel worm with this block i forgot the name
"A dog a llama and a deer yeah we picked him up off the side of the road" lol😂😂😂😂
ha that dog has a neck like a llama...such an odd creature...she came from the streets
@@WorldsWorstFishing hahahaha he looked like it!
That dog is so pretty🥺😲
@@kadogwinnup5738 naw....
Hey man thanks for making all these videos. Me and my brother are going to start a bait business and you and marling baits helps us so much
we aim to please haha
Can you do a video explaining why different plastics are better for different baits, why you would or wouldn't use salt, and whether you actually need scent to catch fish? I would like to get into bait making, but I am still in college and can't afford to buy $500 worth of supplies right now.
I could try something like that...I've touched on all those points over the course of the channel..but not all in one.
That would be helpful. Maybe you could also make a bait that usually uses soft plastic, but use harder plastic and see if the fish will bite it. You can call it an experiment to prove that soft plastic is better for some baits.
Would like to see these with a white base instead of black.
Or just a clear base!
@@hillbillybobber he does have a video where he used a clear base, the colors are crazy amazing
I def need to start making my own baits!
lets get up for a hands on collab!
Cool baits, as a beginner should I use dyes or powder to color my baits?
both for sure..regular pearl powder and standard pigments are where you will build your chops.
@@WorldsWorstFishing Thank you, also should I add the color after I heat up the plastic or before?
what size hypershift packets are you showing in the video at minute 2:18? It would have been nice to see the pigments mixed without the black (just clear plastisol) to see how it comes out.
is the bath just cold water, ice water, room temperature water? and also how much do the molds take for example like senkos?
Good job as always Chris....thanks for your time to teach us and for entertaining us during these times. I love the back to basics videos but these colorshift videos are sick!
Thanks again and be safe.
You bet
Hey man great video!!! Do you know any company thats sells 12 inch or bigger ribbon tale worm molds?
Ai has a 13"..I now basstackle has some big ones..BTS molds also
@@WorldsWorstFishing thank you so much!! I love them big ones in the summer
@@WorldsWorstFishing hey man. How long dose a 5 gallon bucket last for you?
There's a lot of magic in that cauldron.
When doing a presto pot can you use a cake mixer? Thanks Chris for your help?
probably yeah ha
Hey Chris do you know what the company is called that you got your bags that you put your baits in or do u have a link
there is no link, they came from a bag manufacturer in hong kong.
Do you remember what they were called
Great video! Have you ever tried Solor dust? They are here in Florida.
oh yeah...great chamelon powders
its awesome to see dip your car color shift being used in a new and different way great job.
Glad you enjoy it!
Thanks to your videos me and my wife are getting started making our own lures. Keep up the great content. Also where do you get your molds??
awesome...molds are mostly from angling ai and stankx baits (silicone) molds
Freakin awesomeness,used ur link and purchased $300.00 worth of the color shift pigment
Let me know I can send you the same amount for $100
I like the last batch you made ,,the green colors and purple are a good blend,,
Are there anymore of the ai hand pour 4 in swimbait molds and what's that link
anglingai.com/4-hook-slot-open-pour/
just wondering what the best website builder is for an online shop?? and right around how much? btw nice haircut!!!
I built mine on wordpress...but im not really the right person to ask.
Love your vid. Thinking about making my own worms 🪱!
how often do you have to mix to keep the plastic from burning or will it never go over 350 degrees? once it reaches 350, do you bring down the temp to prevent scorching? I guess the overall question is how likely is it to scorch/burn in this pot over a microwave? awesome video!
it usually doesnt burn...I stir before each shot with the injector
World's Worst Fishing will this method work with 2 cup applications?
@@mydefpony I would say no you need much more plastic than that
World's Worst Fishing what happens when you get down to 2 or 1 cup? Do you just have to move faster?
Really like the last set of worms you did with the 2 color shifts. I bet that would be awesome for a centipede.
Where did you purchase the hyper shift products at?
So I have been making some baits but I was wondering if I could use like regular store bought glitter the brand name is spectra by glitterx
Chris, did you ever tried to remeld ZMan baits? I tried but i couldn't seem to get it right, burnt or not getting set...
Eric
its a rubber elastomer..dont remelt it
@@WorldsWorstFishing thank you for the replay, m8! If you ever want to sent some free baits to the netherlands, Let me know! Would love to try them out 😆
Mr Jones where did you purchase that ribbon tail worm mold from?
basstackle
You should definitely try just the greens with the white pearls and just the purples mixed into some black for other batches I feel like they'd look amazing
I've just gotten into soft plastic making.
Any tips
watch my "guide" video and "tips for beginner" video
Dont burn yourself 😂
You had my curiosity, now you have my attention. I've watched your channel for a few months now, and I want to get started in this. Do you have any suggestions on where I should start? Like what molds, whether it be a freehand or the injection molds
Look through his older videos, I know he's made a few videos on getting started
watch my "guide" video
@@RamoArt ok thank you
@@WorldsWorstFishing thank you so much lol
Excelente ,como siempre regalando buenas combinaciones,gracias por enseñarnos lo que podemos hacer .
Hey hi love the videos I was wondering if you have or ever tried using some food condiments as additives for your lures such as some soy sauce , garlic powder chili powder etc.
Love the work keep it up
Appreciate it
I wonder if you had left out the black on the super mix.....
Here is a tip I use to make two color worm tails. I shoot a squirt of Pam then take a small brush lightly brush spam on only one side of mold. The unbrushed side holds in place easely to cut and not have to replace tip of tail! Speeds up possess!
what size are the packages of pigments that you show in the video...thanks
these are 5 gram bags
Hey Chris, there is a color science that if you mix Red, Blue and Green you get black. I'm thinking with a black base and all of the colors of pigment is why it came out maybe a little darker than expected. The color is cool still and it has it's place. I call this color "Aurora". I think you still did another outstanding job. ✌🏾
very interesting....guess I need a color chart
Etc pigments! Awesome!
My buddy and I poured our first 7" StankX Bape the other night in green with red sparkles and he went and used it yesterday and the first fish he caught was a 6.8lb Bass. StankX makes a great mold.
daaaaaaaamn!!
Could I test some of your baits out?
I dont "give" bait out for testing anymore..I do giveaways on my channel from time to time.
How do your giveaways work?
@@keshawnandrews6265 watch and see
Dude the purp and green shift is the beez kneez! However, I think the multi shift color will shine in the water under the sun. Sick color would be the pearl color for a belly...nordic and alien for lat line and the bada$ green(ztg?)with a touch of the orangy bronze color. Thanks again dude
Thanks so much for the comment
It is an amazing effect. It was hard to tell when the black was thick enough with the black pot b
Wanna see you mix them all together in clear bait
might be interesting
That green hypershift with a pearl alien colorshift belly would look stunning
they are sick in real life!
I am not sure and definitely not as good as you but I think if the black wasn’t so bark ,if it was more like smoke the color would have showed up better
well you may be right...the black base is what the company recommends for higher saturation of the shifting colors...but mixing them all together def surpresses the effect.
You recommended that i use worm oil to help my injector work smoother, but I can't seem to find worm oil. Is there a specific brand that you use, and are their any other recommendations such as wd40
lureworks and lurecraft should have worm oil
@@WorldsWorstFishing have you ever tried using wd-40?
I'm just trying to save some money by using what I already have
hello, greetings from colombia, i need 4 moulds from diferents baits, i have a cuestion! you shipping to colombia? you have for sale the materials from make the lures?, you have web site? thanksª
Why did you start with black ?
the owner of DYC says that a black base brings out the shift effect a little better, just going on his advice
Probably wanna try a bamboo stir stick I think over time that knife will scratch the teflon & get it in your plastic
Where are some good places to get some good quality injectors? I can remember the links you’ve said before
basstackle and quality injector
World's Worst Fishing thanks a ton
Just bought some of these after seeing you use them on your channel! Will use them for more than just lures as well though.
Where did you get them
I use MF plastic and paints did you get the hyper shift colors in this video from the dipyourcar website?
yes!
I found an ebay seller named oldsparkle55 and he has a lot of color shift and other colors pretty reasonably priced. I got 25g of purple pearl for like $9 and it is automotive grade powder.
I'm sure it's got an active copyright, but I could imagine some Joe Satriani "Surfing with the Alien" playing while stirring that pot.
do you sell any of your baits?
Great video & product.
Thank you!
Nice hair cut👍
Thanks 😁
I finally get one tomorrow! I'm so excited!
I have a gallon of jerk bait plastics in the black bucket. An when I heat it up an it cools off it never hardens really it stays sticky an soft. What am I doing wrong.
watch my video "tips for the beginner"....you will find what you need
Where do you get these from
Big fan of the 2nd run they look great. Is there anyway besides Instagram to buy them? I dont have instagram and also dont want it
im sorry thats the only way I sell
How about doing this backwards? Add the powders first, then add the base pigment to effect
Would love to see a medium-dark brown base with a mix of purple and orange shift.
Culd u do this again sometime but pour some each step, each set or individual powder added.......maybe with white or no pigment?
I think the multi affect was lost in video translation. Think maybe step by step would help us see the layers and would be awesome to see each step individually.
yeah thats a great idea
The purple with green fleck would be an absolutely great 1 off June bug
yeah you are right!
That was like a purple tornado when you mixed that up ..nice though
That was interesting
Got another question for ya man! I've seen some peoples baits some out cloudy, is that the plastic type causing that, or the heat I've seen people heat set baits to get a sheen back. It's not like yours though. Always love seeing you experiment brother! be safe out there
Could be overheating the plastic or certain types of molds that produce a dull finish
@@WorldsWorstFishing Thanks Chris!
Most of the lures created are real works of arts! Beautiful lures! Now the big question: do they catch fish?
if used correctly haha
Would be cool to see if there's a visual difference between mixing the pigments into black and pouring a clear skin with the pigment in it, then filling the body up with black.
great idea
How do i get in contact with you for some baits?
How about a video of clear plastic with each hyper shift pigment separately to show off the individual effects?
What would it look like if u didn't add pigment dye (clear plastic only) and used all the color shifts? Might be a clear water killer. U should try mixing some in clear fingernail polish and painting it over a hard bait to see the effect.
yeah it might be diffdrent, not sure
Why do you put them in that bath after you inject them and is it just water
yes just water
Thank you
how uch is it to make a custom craw mold
usually a grand for custom mold work
You should be using a plastic utencil, to stir that. A metal utencil will take the coating of of that cooker and make it hard to clean.
The laminate were awesome
The last purple you use would be crazy nice I'm a yellow base and in a frog.
yeah I agree
how about NOT adding black pigment as a base... Only the CS powders???
You should do those last colors in a swirl effect
I actually did later in some hand pour worms...super neat
That's some cool stuff
The laminated ones look sick
yea those did well
You should try the alien pearl with chartreuse on one side and ztm on the other, that would be cool.
for sure
Out of curiosity, when you mixed the pigments in at the beginning (around the 6:30 mark or so) and you get that super cook spidering and swirling pattern...if you were to lightly mix it and inject it, would you get striping in the baits?
unfortunately no...that illusion is only when the plastic is still very hot
@@WorldsWorstFishing Aw what a bummer.
I would consider drinking a Natural Light Beer if it had some color shift mixed in and it looks pretty in a glass.
haha I agree
Man I know for a fact the green and purple worms would be 🔥 here at my local lakes.. just freaking awesome
thanks preston
Hi can u please please use the marling baits mould I the only one that can do it justice please
Very good video man...
I've one question for you:
where you bought the molds for making soft plastic baits???
@@raffaellalolli3951 angling Ai
@@WorldsWorstFishing thanks
Can you make crankbaits out of wood?
I want to start for sure..need more shop space
Yep, small amounts is best. Still cool!
C Block the hyper and color shift. that should give a awesome effect
Would have loved to see an injection done after every second color added. To see a comparison of how it changed through the process.
Let’s see a shop tour
Anybody see the skull appear at 7:28. Cool stuff.
Please please please use marling baits mould please thank u
Yes I think 16 is right!
"Natural light cheap beer" lol whats your take on natural ice 😂 aka bum beer natty ice
ouch that stuff is BAD
Hey I have been watching your videos for a while and I wanted to start making my own baits but I don’t have the money for the supplies but anyway I was wondering if you could send me some baits to try
how can I order from you I love what your doing and what not so if I can I would like to know if you make personal orders and what the price is.
im sorry I dont take bait orders anymore, I only post lures for sale on instagram under a first come basis.
@@WorldsWorstFishing ok thank you I will check that out.
I guess if you have the resource to do something like that, cool. But that was enough pigments for a guy like me to run for a whole year and get all kinds of different effects.
yeah it was a ton of stuff...but I wanted to see what it would do, you are def better off using them one at a time
do you sell any of the baits you make? if so, where can I buy them?
I post lures on my instagram account on a first come basis only
OH Behave babe!!✌️
haha nice....Dr. Evil is one of my favorite characters of all time
@@WorldsWorstFishing 🚀; is that huge; 🌭, get your sausage! Oh look at that giant; 🐓, those are some massive;⚾⚾, it's going, going, look at that;🐍.... All the movie are hilarious! It all about the "🔨" timing