The EASIEST UE Boom Battery Replacement Method [No Soldering]
HTML-код
- Опубликовано: 16 сен 2024
- If your old UE Boom Bluetooth Speaker needs a new battery (~$20) It's actually easy to replace the battery. By removing this plastic tab with a hot blade, you can quickly unplug the connector.
The connector already has a securing tab, so it shouldn't come out in the future. See other tutorials on how to get to this stage. (Unscrew D-ring, pry open rubber cap, remove 6 screws)
Holy crap. Thanks for putting this out here. This made it so much more accessible as a repair.
Ifixit: Basically disassemble the entire speaker set into its components to get access to the connector plug
Nick Avery: Or you could just take off this tiny plastic retainer and finagle it.
Thanks Nick, as it turns out your method for this model by far is the easiest. I first tried to take apart the unit as the Fixit website suggested.
But that is not a viable solution, and the chances of breaking something is very likely (even for an electrician like me). Your method works. It is simple and by removing that piece of plastic you lose nothing.
Glad to hear it!
Thanks so much, that little plastic part was the whole key to unlock it. Thanks it saved me a lot of time.
I just used some long nose pliers to snap the plastic tab!
Best tip on this topic!
If you want to replace the battery and reuse the circuit board attached to the battery, then you'll need to do some soldering. You'll need a 3200 mAh 18650 tabbed battery. I think this route is best because a lot of the reviews of the battery kits claim that the batteries are very short lived. It's typical for Chinese sellers to overstate the capacity of batteries. Get a branded battery (Samsung/LG/Panasonic) from a reputable source and avoid this skullduggery.
Awesome mate!
This was the first thing I should’ve done when replacing the battery 🤦♂️ two batteries later the distortion is still too much. Time for a replacement 😢
Where to buy battery?
Use a "elektronischer Seiten Schneider" to cut it without heat. Thanks a lot ;)
You can, you can pry the top off gently without having to melt the tabs
Is this the first UE Boom Model: S-00122?
What Battery did you replace it with, can you use the UE Boom 2 Replacement Battery?
Which model number did you replace the battery on?
Mine is S-00122
Good gosh looks like you have to be a surgeon..I’m too scared to see what the inside of my UE looks like comsidering it over 5 years old🙄
What are you? Some kind of doctor or something?
Lol an engineer 🤓
There should be a law for everyone on this planet, that you can replace batteries much easier in such items...