Thanks for the very useful video! Just some notes from my successful attempt: The top cover doesn't appear to have the usual super fragile plastic tabs that you need to depress and always break off anyway in order to open it. Just use a wide but thin screwdriver or similar implement, insert it between the "fabric" and the rubber lid, and when you push and poke you'll find a gap between the hidden hard plastic part of the lid and the speaker body. Don't pry on just the rubber edge, that won't accomplish anything. Gradually work your way around that gap, prying the lid increasingly open, and eventually it'll come open with a scary click. Don't worry, there are none of those fragile tabs we're otherwise used to breaking. If you open the lid as much as Prodish did in the video, you'll risk overstretching and snapping the decorative rubber spine (with the volume buttons). At least on my old speaker, the rubber spine was rather stiff and brittle (from ageing?), and it partially cracked from just opening the lid like max 45 degrees. Make sure the silicone looking goop on the left and right protruding parts of the PCB isn't stuck/glued to the fabric before you start prying the PCB out. Those protrusions easily break off, and then you'll have to either buy a new speaker or find a spare PCB. For me, it was enough to carefully pry on the blobs of goop (avoiding to pry on the protruding PCB parts) and I could see it come loose from the fabric. Since I didn't want to completely break the spine and thus didn't open the lid fully, there was no room to insert the new battery already mounted to the PCB connector. Instead I inserted the battery, but not all the way in, in its hole. The battery's connector was then left visible to align with the PCB connector pins before fully pushing everything together again. Before reassembly, wipe the gasket and its opposing contact surfaces on the lid and the speaker body clean for better waterproofing, and try to get loose crap like hardened silicone goop out of the speaker to avoid unwanted noises. And I take no responsibility, it's all on your own risk, yada yada.
Absolute legend! All advices made this so easy. Works like charm. Especially the tip on making sure the adhesive of the pcb on the side is not stuck to the casing.
Thank you for this video! My speaker hasn’t been able to charge for over 2 years. (The highest charge percentage being 10) I opened it up but instead of replacing the battery i just took out the original and placed it back in and it’s charging again!!! Thank you!
Great video man, yep I just saw this video...glad I was of help with this. Your on the right track, the issue was with a software update, which was causing the speaker to sound horrible. So other than replacing the battery, you needed to also go back to an earlier version of the software. Good job man.... HCDigital Art
that worked perfect, the first time I took out the old baTTERY put the old batter back in because I am dumn, but this time I put in the new one, and it works. Sweeet Thank you
I have been wrestling with a non charging UE Megaboom for 2 years. Finally fixed it!! The charger they give you is too short and doesn't make proper contact. Trim back the surround a couple of millimetres with a scalpel. Fixed!!!!
I finally got it open the way you did, but I used some old 18650 batteries I had laying around that cost about $2 each. Speaker works fine now and only cost $4 to fix. Original batteries were still good, they were down to 2.75 volts but they charged up again.
Thank you so much I really missed my speaker and was happy to open it up to change the battery however it still won't charge😩😩 Now I only have the power of the new battery and have to figure out how to be able to recharge 😔😔
Thanks for the great video and help.. I want to perform downgrade of soft/firmware . where can I find old software like you mentioned in your post? Thanks in advance.
Very helpful thanks. I tried all the software updates including old versions plus all the resets, then swapping out the usb charger and lead, but it still wasn't charging (no charge light) so I followed your video just to reseat the battery and pcb and voila it started charging. So with mine it was a bad connection.
I don't know if mine is too old, but I tried to lift the lid just like in the video and ended up breaking the sides. n.n' (be careful). Also, the problem with mine is that when I plug the charger the light blinks three times and then it dies. Anyone with the same problem?
@@jewelsarkar3026 Update on this problem: putting it in the fridge for a few hours actually works! (Somebody made a video about it). Didn't have a problem after that.
My Megaboom still works and charges, however the battery life is appalling. Logitech quote 15-20 hours, I'm lucky if I get 1.5-2 hours. Not sure whether to have a crack at replacing the battery and risk it not working entirely, or just carry on with the dismal battery life
They get those numbers from most likely playing music on its lowest volume which consumes the least power. I get maybe 3-4 hours playing music with its highest volume.
So what I did to fix one, I disconnected the battery, I plugged it on my computer, then I put the battery back in, and plugged it in again, it now works perfectly!
mine started to slowly have shorter battery life and eventually would never turn on. even after charging and waiting for it to show fully charged. taking it off the charger it wont turn on but when plugged in it turn its self on automatically. i replaced the battery and same issue. i tested both of the batteries and they cam back as a good voltage still. so what would cause it to only work when plugged in even with a new battery?
For waterproofing electronics, most pros (and DIY like myself) use B-7000 glue, pretty easy to find on Amazon. I took apart and fixed my S20's cracked camera lense and put it back together with B-7000 and it is still waterproof.
is my megaboom LE defective? i bought it in 2018 and haven't used it in forever. just took it out again and I noticed that the audio only comes from the top of the speaker where the + and - buttons are. is there supposed to be sound coming out from the bottom of the device where the charger area is?
Please someone help me. My ue megaboom is not charging properly. How do I know if I need to replace the battery ? I tried connecting the power for a few seconds and then unplugging and repeat for 20-30 times it will fix. I tried this and it worked once but now that doesn't work either. I can't factory reset bc there's not enough power to do that. I also didn't find a update firmware option on my ultimate ears app
mine was doing that too. I finally fixed it by removing the battery, cleaning the pins, and then reseating it all firmly. Now it chages properly with the slow, pulsing charge.
Seems I have to repeat this every so often.. batteries keep on dying on me within couple months.. anyone else ever encounter this issue? Seems more than jus a battery fix on mine
Do i need a new battery i connect my phone to speaker it will play for a few minutes cut out the come bk on continously, its close to being thrown in the bin tried factory reset the lot
See i did all that but now it wo my charge then when I get it to charge it doesn't stay on it just turns off... I'll have to tinker with it to figure this out
These ue megaboom speakers are such a dumb design. They need to have power to allow you to charge them. So if you dont charge frequently they qill self terminate
Mine took about 3 years before it took a shit and lasted only a few minutes on a full charge. They loose about 25% of its original charge every year you use the device.
I replaced the battery but I still have the same problem. When I plug it in it shows a white flashing light and I put it on charge for 15 hours. Can you plz help I really like this speaker.
If You replaced battery the last thing You can do is downgrade soft, upgrade again and repeat until it will work. It worked for me. Also few restets like on the movie. Sorry but that like that. Reapet all of it and it will start to work. I hope.
Normally Megaboom is updated by phone app but as well You kind fins on internet .exe file with firmware update. I found 2 old one and I "downgraded" and upgrades soft few times until it started to work. Try to find those files on web. Still people share those files in local google drives or dropboxes
dang it so damn complicated. battery on the side what happen to older version boom box plug it bluetooth. THIS SO DAM RIDDICULOUS JUST TO GET BATERRY OUT IF I KNEW GONE OUT BUY THE DAMN BATTERY. FUCKED UP RUBBER TOTYALLY NOT FUNCTIONAL. HELL ANOTHER COM DUMBING CRAP TO PUBLIC
Thanks for the very useful video! Just some notes from my successful attempt:
The top cover doesn't appear to have the usual super fragile plastic tabs that you need to depress and always break off anyway in order to open it. Just use a wide but thin screwdriver or similar implement, insert it between the "fabric" and the rubber lid, and when you push and poke you'll find a gap between the hidden hard plastic part of the lid and the speaker body. Don't pry on just the rubber edge, that won't accomplish anything. Gradually work your way around that gap, prying the lid increasingly open, and eventually it'll come open with a scary click. Don't worry, there are none of those fragile tabs we're otherwise used to breaking.
If you open the lid as much as Prodish did in the video, you'll risk overstretching and snapping the decorative rubber spine (with the volume buttons). At least on my old speaker, the rubber spine was rather stiff and brittle (from ageing?), and it partially cracked from just opening the lid like max 45 degrees.
Make sure the silicone looking goop on the left and right protruding parts of the PCB isn't stuck/glued to the fabric before you start prying the PCB out. Those protrusions easily break off, and then you'll have to either buy a new speaker or find a spare PCB. For me, it was enough to carefully pry on the blobs of goop (avoiding to pry on the protruding PCB parts) and I could see it come loose from the fabric.
Since I didn't want to completely break the spine and thus didn't open the lid fully, there was no room to insert the new battery already mounted to the PCB connector. Instead I inserted the battery, but not all the way in, in its hole. The battery's connector was then left visible to align with the PCB connector pins before fully pushing everything together again.
Before reassembly, wipe the gasket and its opposing contact surfaces on the lid and the speaker body clean for better waterproofing, and try to get loose crap like hardened silicone goop out of the speaker to avoid unwanted noises.
And I take no responsibility, it's all on your own risk, yada yada.
Absolute legend! All advices made this so easy. Works like charm. Especially the tip on making sure the adhesive of the pcb on the side is not stuck to the casing.
Thank you for this video! My speaker hasn’t been able to charge for over 2 years. (The highest charge percentage being 10) I opened it up but instead of replacing the battery i just took out the original and placed it back in and it’s charging again!!! Thank you!
Great that I helped :)
Really?
@@bradleytareu442 ?
@@bradleytareu442 yeah I did the same just took out the batter and placed it back in then it started charging fine
@@darkzerotwo593 Always first try resetteing before repairing ;)
This fix saved me much rage, also I got the same battery on eBay. May you never die, also share more fixes you legend!!
Eva Byrden it was off eBay, I will have look back in purchases if I can find it for you
Eva Byrden www.ebay.com.au/itm/303453832505
😂
How much was the battery?
25USD for a new battery from Ali instead of buying a new UE and is working as new again. Amazing! Thanks!
I've bought Aliexpress batteries for phones in the past and the battery life dropped far faster than OEM. It wasn't worth the discount!
@@blahblahblahblah2837 yeah a lot of bad quality there but after a year it still works perfectly fine. Maybe was lucky :-D
THANK YOU FOR THIS! iFixit's guide is pretty vague and the pictures did not show what they descriptions said. This cleared everything up. Thank you!
Thank you. After pulling out the top board, then putting it back in, my boom started charging again. Thanks for saving me some bucks!
Brilliant got the battery replaced without any problems. Great tutorial, keep up the good work.
Great video man, yep I just saw this video...glad I was of help with this. Your on the right track, the issue was with a software update, which was causing the speaker to sound horrible. So other than replacing the battery, you needed to also go back to an earlier version of the software. Good job man....
HCDigital Art
This is a great how to video! Thanks!
Excellent job on the video! My 5 year old son and I were able to follow along and fix ours, and now is actually charging!
that worked perfect, the first time I took out the old baTTERY put the old batter back in because I am dumn, but this time I put in the new one, and it works. Sweeet
Thank you
Thank you for this. I was going to throw my away and buy something new! I'm going to give this a try. Thanks again for this video!!
I have been wrestling with a non charging UE Megaboom for 2 years. Finally fixed it!! The charger they give you is too short and doesn't make proper contact. Trim back the surround a couple of millimetres with a scalpel. Fixed!!!!
Thanks for the great video, I too had the same issue....I just ordered the correct battery thanks to this video.....Cheers.
Worked great for us. Thank you for the video.
I finally got it open the way you did, but I used some old 18650 batteries I had laying around that cost about $2 each. Speaker works fine now and only cost $4 to fix. Original batteries were still good, they were down to 2.75 volts but they charged up again.
interesting how does that work?
Worked perfectly, thank you!
I LOVE it!! You made it look so easy and I followed along... voila!! THANK YOU!
good to hear that, thanks :)
Cheers mate. Job done. Thanks for sharing 💪
Thank you! Worked
Wow you make opening it extremely easy
Detailed tutorial thanks
Thank you so much I really missed my speaker and was happy to open it up to change the battery however it still won't charge😩😩 Now I only have the power of the new battery and have to figure out how to be able to recharge 😔😔
Thank you so much
I removed my battery and put it back in and I got led lit up now and it charges but it only charges with cover open
Same
Sounds like it's pushing the battery too tight or loose against the connector cables.
Thank u it works!!!😬
Thanks for the great video and help.. I want to perform downgrade of soft/firmware . where can I find old software like you mentioned in your post? Thanks in advance.
Very helpful thanks. I tried all the software updates including old versions plus all the resets, then swapping out the usb charger and lead, but it still wasn't charging (no charge light) so I followed your video just to reseat the battery and pcb and voila it started charging. So with mine it was a bad connection.
I don't know if mine is too old, but I tried to lift the lid just like in the video and ended up breaking the sides. n.n' (be careful). Also, the problem with mine is that when I plug the charger the light blinks three times and then it dies. Anyone with the same problem?
Yes mine got same problem
@@jewelsarkar3026 Update on this problem: putting it in the fridge for a few hours actually works! (Somebody made a video about it). Didn't have a problem after that.
Adriana Rojas thanks for your information need to put in deep fridge? Or just normal fridge
@@adriirojas hey am i supposed to put the whole speaker or just the battery?
@@AngelPerez-rf7ff I put the whole speaker in.
Make cups with numbers 1 2 3 4 for the parts removed. Number 1 cup is for first part removed.
Thx! Nice video.
My Megaboom still works and charges, however the battery life is appalling. Logitech quote 15-20 hours, I'm lucky if I get 1.5-2 hours. Not sure whether to have a crack at replacing the battery and risk it not working entirely, or just carry on with the dismal battery life
They get those numbers from most likely playing music on its lowest volume which consumes the least power. I get maybe 3-4 hours playing music with its highest volume.
So what I did to fix one, I disconnected the battery, I plugged it on my computer, then I put the battery back in, and plugged it in again, it now works perfectly!
Is there a good place to get a quality battery some places sell junk thanks
Nice thank you so much for the video every how long you need to change the battery??
mine started to slowly have shorter battery life and eventually would never turn on. even after charging and waiting for it to show fully charged. taking it off the charger it wont turn on but when plugged in it turn its self on automatically. i replaced the battery and same issue. i tested both of the batteries and they cam back as a good voltage still. so what would cause it to only work when plugged in even with a new battery?
thanks for the video. is the speaker still waterproof after the replacement ?
Liloulalalala I wouldn’t bet on it
To be honest I do not believe producers statements so Lets say its splash proof 100%
Hi, Nice video. I would like to know what kind of glue did you use to seal te speaker after repair... Thank you 👍
I did not used any glue at all. I just put back parts back.
For waterproofing electronics, most pros (and DIY like myself) use B-7000 glue, pretty easy to find on Amazon. I took apart and fixed my S20's cracked camera lense and put it back together with B-7000 and it is still waterproof.
is my megaboom LE defective? i bought it in 2018 and haven't used it in forever. just took it out again and I noticed that the audio only comes from the top of the speaker where the + and - buttons are. is there supposed to be sound coming out from the bottom of the device where the charger area is?
I do not know. I just replaced battery
Mine doesn't turn on. Just says critical battery please charge
Please someone help me. My ue megaboom is not charging properly.
How do I know if I need to replace the battery ?
I tried connecting the power for a few seconds and then unplugging and repeat for 20-30 times it will fix. I tried this and it worked once but now that doesn't work either.
I can't factory reset bc there's not enough power to do that.
I also didn't find a update firmware option on my ultimate ears app
YaY!
great video, I'm gonna pay someone for this
What is the power of the original Logitech mega boom USB charger?
Its 5V/9V 2A.
@@prodish OK thank you.
the flashing light of mine is flickering, like something is interrupting the charging process, can anyone help me?
I have the same problem
If its constant flashing like i saw on another video the battery is bad. If the battery is new that i am not certain on what to tell you.
mine was doing that too. I finally fixed it by removing the battery, cleaning the pins, and then reseating it all firmly. Now it chages properly with the slow, pulsing charge.
Your connection to the battery might be a bit too loose. Does it stop doing it when you put a heavy weight on the lid or push really tight?
Seems I have to repeat this every so often.. batteries keep on dying on me within couple months.. anyone else ever encounter this issue? Seems more than jus a battery fix on mine
Do you know if I can you replace a rechargeable 7.2v 3130 mAh with a7.4v 3400 mAh it's for an Ultimate ears megaboom speaker?
I just opened mine and it's got a 3130mAh battery and can't find that one at all on the Internet to buy
Just looked it up and the mAhi is the battery capacity so will be fine with the 3400
Do i need a new battery i connect my phone to speaker it will play for a few minutes cut out the come bk on continously, its close to being thrown in the bin tried factory reset the lot
motherboard is gome
@@chadsmith7075 basically its fked then isi
See i did all that but now it wo my charge then when I get it to charge it doesn't stay on it just turns off... I'll have to tinker with it to figure this out
You need to perform reset, maybe few times. How to do it is at the end of the movie.
These ue megaboom speakers are such a dumb design.
They need to have power to allow you to charge them. So if you dont charge frequently they qill self terminate
All batteries are like that.
My megaboom is charging, it is also connected but no sound? What do i do?
Try to reset and reboot megaboom. Try another phones. If that does not work that its trash.
Where can i find the battery for sale!
Amazon or Aliexpress ….
How long after purchase did it take the battery to die?
2-3 years. But the good news arę that You can easly replace battery
Mine took about 3 years before it took a shit and lasted only a few minutes on a full charge. They loose about 25% of its original charge every year you use the device.
my megaboom 3 speaker volume buttons stopped working. any other way to reset it? drop your mai so i can contact you directly
the only way to reset is to downgrade firmware and upgrade that again. They it will be like reset I believe.
@@prodish how
@@botman4566 You need to search internet for any firmware older then new one. Use it and latter on back to new one. Just use google.com
@@prodish yeah i got that but how to install it?
@@prodish much appreciated thanx dude💜
I replaced the battery but I still have the same problem. When I plug it in it shows a white flashing light and I put it on charge for 15 hours. Can you plz help I really like this speaker.
If You replaced battery the last thing You can do is downgrade soft, upgrade again and repeat until it will work. It worked for me. Also few restets like on the movie. Sorry but that like that. Reapet all of it and it will start to work. I hope.
prodish how do I do that?
Normally Megaboom is updated by phone app but as well You kind fins on internet .exe file with firmware update. I found 2 old one and I "downgraded" and upgrades soft few times until it started to work. Try to find those files on web. Still people share those files in local google drives or dropboxes
prodish I changed the charge and now it turn on for 5-8 seconds and when I check the battery it is always 40%
@@princedhillon5206 check this out - watch?v=HDBIL4AdUlM
should have added a link to the battery you bought
Source of battery can be diffrent based on Your location. Amazon, ebay aliexpress - just serach magaboom battery and You will find it
Will this work for Megaboom 3?
Yes. Its even much easier. If You will open megaboom You have direct access to battery
hey i need help
What type of battery do I need???
Just google Battery for Megaboom and You will get a lot of offers from ebay, Amazon, Aliexpress
Any link to the new battery
Check Local amazon, ebay - You Can also easly Google it
how u open this shit, I not can 😔😔
dang it so damn complicated. battery on the side what happen to older version boom box plug it bluetooth. THIS SO DAM RIDDICULOUS JUST TO GET BATERRY OUT IF I KNEW GONE OUT BUY THE DAMN BATTERY. FUCKED UP RUBBER TOTYALLY NOT FUNCTIONAL. HELL ANOTHER COM DUMBING CRAP TO PUBLIC
didnt work for me :(
Donde las venden las pilas
hernan zamorano gomez en el ebay
I haven’t the patience to finish this (too much talking)