A high-school friend of mine before he died in car crash put a turbo 4 cylinder in his mustang. It came out of a thunderbird and with mods was quick as hell.
When I was a freshman in high school my dad got a Ltd wagon, with the jump seats in the rear that faced each other. Instead of arguing shotgun we argued about the back. Lol
I know that this is almost two years later i could have a 88 crown Vic needs a trans for $550 over in Ohio around Cincinnati about 6 months ago but I still think if I get a non mustang ford panther platform car i want a 95-98 ford 5.0,4.6,5spd Thunderbird... prefer the green metallic or the prarl blue..
You'll have to pull the glass to weld the new piece in. NEVER weld or grind around glass.. it'll ruin your windshield.. I've done it. And weld can actually shatter the glass from thermal shock.
That Duplicolor Color Match paint generally sucks the bag. I got some for my Ford truck and it was an absolutely awful match...and the nozzles sucked also. The generic Duplicolor spray paint is so much better.
West coast is great for OBS Ford trucks. I own one here in Toronto, Canada...where it's absolutely impossible to find these things anywhere. They are very up here...due to rust. Way too much salt used on roads and sidewalks and parking lots. I have no choice but to buy everything new....or just fix rust problems with welding and bondo.
dont weld anywhere near glass. take it from my mistake. u may think ur not gna hit it with sparks but they find their way to it. sparks make pits in it. grinder sparks and weld sparks are not the same. take the glass out or find a way.
Make sure if it has the plastic inserts in the wiper arm cups you save them. If you break or wear one out they are hard to find. Not on all years of mustangs but I need it on one and had to cobble it together because couldn't find one
That's a fact. I dropped a 71 short deck 460 into my 78 Fairmont with the stock single core radiator.. Effectively the same radiator in Craigs's Mustang. I ran that car all over So Cal and AZ in the summer, with AC running, and the only time I'd get over 190 was if I was hammering on it hard or trying to cruise over 75mph. Traffic was never an issue. I can assure you there is no way a 302 is putting out that sorta heat just cruising around unless its got serious problems. I'd love to see him check that radiator face with an infrared gun.
@@vernm6189 I'd expect more than running hot from a screwed up headgasket. Usually steam from the exhaust, unexplained coolant loss, and sudden temp spikes. My vote is either a plugged radiator or an incorrect/failing water pump.
@@Roy-al-Paign I think they're better than the stock ones personally, though I can't say much I had bad understeer this morning and went into a ditch, gotta restore the entire front end now.
I was ready to scream when I saw that square body hacked up, had to keep telling myself that the parts went to a better truck. That Foxbody in Craig’s hands is gonna be a really nice piece one of these days.
Hey Craig did you buy any chance group your Galaxie content into a list yet? I'd like to share that list with a few different peeps as well as on my facebook and twitter. Love the work you did and continue to do on those two beauties :-)
You may have addressed this elsewhere, but hearing the exhaust in this video, I wanted to ask, what is your exhaust setup on the fox? I’m dropping a 302 in my pickup and would like a similar noise level and tone.
@@Thecraig909 awesome, thanks so much for the quick reply. I’ve always got the shorties, I was thinking H crossover on my low power build, and I’m definitely looking in to spintech. I’ve actually never heard of them before. Thanks a lot!
Can't wait for the upcoming content! Btw, you keep saying for us to let you know what we think in the comments... I think supercharger or turbo on the Fox! Haha would be awesome to see but I understand not wanting to turn your daily into a potential boost machine. Any future plans to boost any of your rigs? Would love to see it!
A high-school friend of mine before he died in car crash put a turbo 4 cylinder in his mustang. It came out of a thunderbird and with mods was quick as hell.
there was a 4cly turbo mustang also. a svo
Yes there was a turbo mustang I had one had a green boost light on the dash
They made the turbo gt as well.
Did he die in the fast as hell car?
Everytime I go to a junkyard I feel like a kid in a candy store. Love it.
Senor Moose stache 😎
The rear end in that turbo coupe will fit in your mustang it’s a 8.8 31 spline posi
Just got my shirt delivered yesterday
When I was a freshman in high school my dad got a Ltd wagon, with the jump seats in the rear that faced each other. Instead of arguing shotgun we argued about the back. Lol
I know that this is almost two years later i could have a 88 crown Vic needs a trans for $550 over in Ohio around Cincinnati about 6 months ago but I still think if I get a non mustang ford panther platform car i want a 95-98 ford 5.0,4.6,5spd Thunderbird... prefer the green metallic or the prarl blue..
You'll have to pull the glass to weld the new piece in. NEVER weld or grind around glass.. it'll ruin your windshield.. I've done it. And weld can actually shatter the glass from thermal shock.
Love the junkyard videos keep them coming
Stache is looking slick🤙
Yes... J.Y. run! Carnage...
5:43 should have took the 5.0 intake plaque
Damn didn't even think of that!
Oh it’s the queen, I recognize that car too. Lol
Looks like the LKQ in Oceanside, got some sway bars for my F-150 there.
You make me miss my mustang
That cowl panel replacement is Not going to be fun...will be interesting to see what you decide to do with it...
You won't regret it you gotta get the crown vic ltd
Go back to that turbo coupe has a 8.8 rear. Has either 3.55 or 3.73s.
Tiffany amber Thiesen air freshener?
I luv your junk yard trips!
That Duplicolor Color Match paint generally sucks the bag. I got some for my Ford truck and it was an absolutely awful match...and the nozzles sucked also. The generic Duplicolor spray paint is so much better.
Do the heat extractor!
Damn I can’t believe that they didn’t make y’all pay for whole bed. Here in these yards I would have bought the whole bed had u cut fenders iff
So many foxbodys have a bent cowl because the hoods fly up on them all the time
Love the hat, I'm a member of the group also!
West coast is great for OBS Ford trucks. I own one here in Toronto, Canada...where it's absolutely impossible to find these things anywhere. They are very up here...due to rust. Way too much salt used on roads and sidewalks and parking lots. I have no choice but to buy everything new....or just fix rust problems with welding and bondo.
Man I wish I had junkyards like that here in Texas
If that turbo coupe still had the clutch pedal you could do a hydraulic clutch setup. I am going that route for my t56 swap
That white Ford Michael was inside looks exactly like mine...same grill, colour and hood, except I have the 302 gas engine.
dont weld anywhere near glass. take it from my mistake. u may think ur not gna hit it with sparks but they find their way to it. sparks make pits in it. grinder sparks and weld sparks are not the same. take the glass out or find a way.
Any chance the next batch of shirts would have Mader F100?
Hey I went to that one last weekend!
Can’t wait to see the fox when you get done with it! Another great video!
Trade you a set of hood hinges for a shirt lol. I should have a set kicking around
Went to the junkyard today and found an aluminum driveshaft in a crash one...thought I was in heaven!!!
I’ve never known a “pick and pull” that allows side angle grinders to be brought into them.
Make sure if it has the plastic inserts in the wiper arm cups you save them. If you break or wear one out they are hard to find. Not on all years of mustangs but I need it on one and had to cobble it together because couldn't find one
something really wrong if your temp is getting up 210 cruising around in Oct.
That's a fact. I dropped a 71 short deck 460 into my 78 Fairmont with the stock single core radiator.. Effectively the same radiator in Craigs's Mustang. I ran that car all over So Cal and AZ in the summer, with AC running, and the only time I'd get over 190 was if I was hammering on it hard or trying to cruise over 75mph. Traffic was never an issue. I can assure you there is no way a 302 is putting out that sorta heat just cruising around unless its got serious problems. I'd love to see him check that radiator face with an infrared gun.
@@Ares-jx4ep maybe they screw up on One or both Head gaskets during install ?
@@vernm6189 I'd expect more than running hot from a screwed up headgasket. Usually steam from the exhaust, unexplained coolant loss, and sudden temp spikes. My vote is either a plugged radiator or an incorrect/failing water pump.
@@Ares-jx4ep in the SBF you can flip the head gasket, that will block off the water at the back of the head and will make it run hot.
"It should be like, a crime to put these taillights on these cars"
Me who has those taillights on my foxbody
:,(
Get rid of them. You will be doing all us fox owners a favor.
@@Roy-al-Paign I think they're better than the stock ones personally, though I can't say much I had bad understeer this morning and went into a ditch, gotta restore the entire front end now.
Lqk Oceanside 👀
Love the moustache and the content
Yes! A junkyard video!!
I was ready to scream when I saw that square body hacked up, had to keep telling myself that the parts went to a better truck. That Foxbody in Craig’s hands is gonna be a really nice piece one of these days.
No such thing as a square body ford
@@679-v7x buddy what you smoking?
@@679-v7x There was a Chevy in that yard bro.
The 2nd gen firebirds and 2nd gen Camaro's use the same doors
Guys. Need bedsides for short bed 1978 f100 stepside. You see em lemme know.
Oceanside
Should of taken the quarter glass even though they weren't in good condition they still sale for a decent price
Always my favorite videos
I was just at pick n pull last week cutting off some quarter panels for my notchback. Keep up the killer work on all the projects Craig.
A pretty good mob from where you are? What does that mean?
😂 bro the 70's called they want their pornstash back 😂
My cowl needs to come off because it set under a tree apparently and leaves rotted the channel out above passenger feet.
Hey Craig did you buy any chance group your Galaxie content into a list yet? I'd like to share that list with a few different peeps as well as on my facebook and twitter. Love the work you did and continue to do on those two beauties :-)
I literally just went to see if you had posted anything new 2 seconds before this video dropped
You may have addressed this elsewhere, but hearing the exhaust in this video, I wanted to ask, what is your exhaust setup on the fox?
I’m dropping a 302 in my pickup and would like a similar noise level and tone.
Shorty headers an x pipe and spintech mufflers is the key!
@@Thecraig909 awesome, thanks so much for the quick reply. I’ve always got the shorties, I was thinking H crossover on my low power build, and I’m definitely looking in to spintech. I’ve actually never heard of them before. Thanks a lot!
Can't wait for the upcoming content! Btw, you keep saying for us to let you know what we think in the comments... I think supercharger or turbo on the Fox! Haha would be awesome to see but I understand not wanting to turn your daily into a potential boost machine. Any future plans to boost any of your rigs? Would love to see it!
Dude a day at junk yard was cool and the woman was nice looking need woman on your video
Mannnnnn you been putting in work between vidyas n shirts! Have you even slept?!
Too bad on the hinges, good on the rest! Need to nab those good seats for your truck!
I love these kinds of videos!
I think you should stop looking at your temp gauge and break down and buy a better 4core aluminin radiator
I’ve been trying to get one for months.
Gettin' 'er done Craig!!! 😏
Hey! Hey hey hey, you have my girls pic hanging from your rear view mirror in the fox body. What's going on? Lol.
Hey I’m the first to comment that’s got to mean something
Junkyard is full of Ls engines for Fox body’s lol