I wanted to tell you how splendid these videos were on the Fiat Grande Punto. Haynes sells similar videos for buyers alone at close to 18 GBP. It would mean a lot if you could upload the following videos for Fiat Grande Punto as well: 1. Rear light cluster bulbs replacement 2. Coolant replacement 3. Fluid level checks 4. Thermostat replacement 5. Starter motor replacement 6. Auxiliary belt replacement 7. Headlight bulbs replacement 8. Alternator replacement 9. Battery removal & replacement 10. Rear brake shoes replacement 11. Rear shock absorber replacement 12. Spark plug replacement Please....it would mean a lot for people like us. The moment I saw your fantastic videos, I immediately subscribed to your awesome channel!
Thank you for sharing your opinion! Sorry, we do not have such videos. But you can follow the updates by the link: ruclips.net/p/PLWep5LzT0sxlAyqzRA_mxIT1w3pY99vgw Best Regards, Autodoc team
just replaced mine front shocks,when tighten down everything my top plate was not resting on chassis,its like few mm above.is that like suposed to be or?
With the car on the ground the top plate should stay in place and not be able to move from side to side. What can happen is that an aftermarket nut on the strut mount is higher than the original, this will also cause the top plate to sit a bit higher. My guess is that you would sometimes hear a clunking noise when it's not fitted correctly, so you would quickly find out.
Unfortunately, we can't give exact answer for your question. But you always can get in touch with our Customer Support team for searching the compatible car parts for your car via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact AUTODOC
It is not necessary. The steering wheel may not float exactly, so the convergence will have to be corrected. Basically, the work is done without touching the adjusting bolts.
I can't find any sockets with a hole big enough to fit the allen tool through, I'm about to buy some ring spanners and hope that can slot inside the cup, cars are soo annoying 😂
Thank you for your comment! Unfortunately, it is not possible to answer your question, there may be a lot of reasons, we recommend contacting the service for a complete diagnosis and identification of the cause of the problem. Best Regards, Autodoc team
![How to change front suspension arm / front control arm on FIAT PUNTO 199 [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/X260NYLxnn4/mqdefault.jpg)
I wanted to tell you how splendid these videos were on the Fiat Grande Punto. Haynes sells similar videos for buyers alone at close to 18 GBP. It would mean a lot if you could upload the following videos for Fiat Grande Punto as well:
1. Rear light cluster bulbs replacement
2. Coolant replacement
3. Fluid level checks
4. Thermostat replacement
5. Starter motor replacement
6. Auxiliary belt replacement
7. Headlight bulbs replacement
8. Alternator replacement
9. Battery removal & replacement
10. Rear brake shoes replacement
11. Rear shock absorber replacement
12. Spark plug replacement
Please....it would mean a lot for people like us. The moment I saw your fantastic videos, I immediately subscribed to your awesome channel!
Thank you for sharing your opinion!
Sorry, we do not have such videos.
But you can follow the updates by the link:
ruclips.net/p/PLWep5LzT0sxlAyqzRA_mxIT1w3pY99vgw
Best Regards,
Autodoc team
Yep sounds like you own a punto 🤣
Easy when you have the right tools 👍
very profesional and usefull video for me great from autodoc
Thank you for sharing your opinion with us.
We are glad that this video was useful to you!
You refitted the old top mount.... 😱😱😱
Hello. Could you clarify or rephrase your question, please?
just replaced mine front shocks,when tighten down everything my top plate was not resting on chassis,its like few mm above.is that like suposed to be or?
Yes, that's how it should be.
With the car on the ground the top plate should stay in place and not be able to move from side to side. What can happen is that an aftermarket nut on the strut mount is higher than the original, this will also cause the top plate to sit a bit higher. My guess is that you would sometimes hear a clunking noise when it's not fitted correctly, so you would quickly find out.
Super 👍
Nice informertive
Awesome job.
Thanks for your positive comment! Stay with us!
Which brand strut mount Using in this punto?
Unfortunately, we can't give exact answer for your question. But you always can get in touch with our Customer Support team for searching the compatible car parts for your car via email - info@autodoc.co.uk or form here: www.autodoc.co.uk/services/contact
AUTODOC
How to replace Fiat Grande Punto Emotion Diesel 2019/10 Horn , do we need to remove the entire Bumper or only Grill , Thanks
We recommend that you refer to the technical documentation for car maintenance.
good clip
We are glad that you enjoy our work!
is 4-wheel allignment necessary after this operation?
It is not necessary.
The steering wheel may not float exactly, so the convergence will have to be corrected. Basically, the work is done without touching the adjusting bolts.
not necessary but is better to check after few years of driving.
I can't find any sockets with a hole big enough to fit the allen tool through, I'm about to buy some ring spanners and hope that can slot inside the cup, cars are soo annoying 😂
How Tight Was The Nut On Top Torqued To If You Dont Mind
You can find this information in the technical documentation for car repair.
My fiat linea rpm is fluctuating... I cleaned throttle body and changed air filter but still same issue I'm facing in car...
Thank you for your comment!
Unfortunately, it is not possible to answer your question, there may be a lot of reasons, we recommend contacting the service for a complete diagnosis and identification of the cause of the problem.
Best Regards,
Autodoc team
5:37
There is one nut on the new shock absorber and we need two to put it back on the car. Where is the other nut?
What is the thread size?
The moment of fixing the entire rack assembly to the body glass was missed in the video. Nut with thread M12 x 1.25 mm
The moment of fixing the entire rack assembly to the body glass was missed in the video. Nut with thread M12 x 1.25 mm
@@autodocuk Thank you very much.
Good 👍👍👍