I like the zappi (I don't have one) because I'm not reliant on an app. It has controls on the box. My phone/router/internet connection dies, I can still charge my car.
I've been looking at both for an MG5 EV arriving in September - seems to be more installers for Zappi in West of Scotland than Hypervolt which may influence my decision, otherwise I was slightly swaying towards Hypervolt. Availability may becomes an issue too. Both look very good though.
I am doing research into getting a decent charger, hypervolt lit up at night may attract unwanted attention from theives. The zappi is also available in white by the way. Nothing is going to remain clean in our UK weather, eventually the insects will invade and the sun and rain will weather it down. Are pikeys still cutting tethered cables for the copper and how easy is it for someone to open and remove the unit, are there any theft deterent screws?
I did think he fudged that somewhat. The fact that you have to buy an extra piece of kit to make the Zappi work not only adds to the cost but it’s more “stuff” in the house - a big minus point for the Zappi in my opinion. I also felt introducing the Eddi was a massive red herring. If you want to heat hot water from solar, there’s nothing stopping you having an Eddi as well as a Hypervolt to charge your car.
Yes, but put a screen on the device and let it work without the App. Throw an access fob(s) in for a all-around class leading charger. I'm only going for the Zappi because I can use it without the App, but I really wanted the Hypervolt. Make my dream version and I'll never go with anyone else ;)
I like the hypervolt so far, the only 'big thing' which I like the Zappi for better is the user display. So e.g. a visitor could see how their car is charging without needing to be given access to the app. Also, what happens if the app is down? If MyEnergi integrated their hub within the Zappi or the Eddi, it would remove all the faffing about, and the built-in controls might occasionally save the day if you're internet connection is down. Hypervolt - easiest by far, but risky over-reliance on the app and the user being web connected. The "apple" version of e.v. chargers Zappi - really good, but the connected side is 'clumsy' and needs work on the integration - would still be my first choice mainly because of that onboard display and controls.
Thanks so much for your comment! If the app is down simply pull the power cable out of the hub and wait 5 seconds and replug! If that doesn't work, contact myenergi!
@@heladas90 Apart from Zappi and Hypervolt what other brands contain built in RCDs and PEN fault protection? A Google search doesn't appear to show me much
Either is fine for me, but how come companies aren't providing security features, the last thing you want is to go away for a week and random ppl start charging their cars. A simple fob feature or card reader would be perfect. Hypervolt also needs a screen because you need a means to work the unit without the App. Once the broadband goes down, I assume the hypervolt goes stops working but the Zappi would keep going?
These aren't really chargers, the chargers are actually on the car and these feed electrons to the charger so the speed of charge will depend on the speed of the charger in the car
The Max feed is below 7.5kwh, this is because your home is feeding power in DC format, which is deliberately capped. Your car automatically knows this and blocks itself from accepting a higher rate. So it doesn't matter which car you use, it won't accept a higher rate. Some older homes can allow upto 11-22kwh based on their 3-Phase setup, which allows more power through. Practically most homes are single Phase and capped. AC chargers you see at petrol stations can generate higher rate feeds, which is why cars can still accept upto 100kwh or more.
No, it has no other option right now, but at the price it's fine tethered. Just wrap the cable around the unit, as there's enough space for a cable length up to 7m. You can choose which length cable you need.
@@jaymrree839 Hi thanks for the reply. I find the tethered ones look a real mess with the cable flapped around. I went with the Easee charger, which is tiny and very well designed.
Just ordered the Hypervolt, very pleased with it. Looks great
zappi all the way. It’s been doing all this stuff for years and has a solid UK team behind it.
Zappi hub is now optional as the charger comes in a wi-fi version, which eliminates the need for the hub.
I like the zappi (I don't have one) because I'm not reliant on an app. It has controls on the box.
My phone/router/internet connection dies, I can still charge my car.
What's stopping randoms from charging their car while you're out? like a dodgy local who knows when you're out? but agree with the features on Zappi.
I've been looking at both for an MG5 EV arriving in September - seems to be more installers for Zappi in West of Scotland than Hypervolt which may influence my decision, otherwise I was slightly swaying towards Hypervolt. Availability may becomes an issue too. Both look very good though.
Zappi have woeful supply issues with both the Zappi and the hub. I got so fed up waiting I cancelled and am very happy with my Hypervolt.
@@TheWhiteLife is the Hypervolt still performing ok to date? Was just about to buy it until I read about wifi issues?
@@TheJoeJenn Absolutely fine. My only observation is the white cover has weathered a bit. To be fair, I’ve not tried cleaning it.
@@TheWhiteLife brilliant thanks for the reply. Yeah we're thinking of getting the black version! That's good to hear, thanks!
Both are great chargers, went with the Hypervolt and saved £300
Cable length on Zappi is a non-issue. Just get an untethered version and use your own cable of whatever length you like!
I am doing research into getting a decent charger, hypervolt lit up at night may attract unwanted attention from theives. The zappi is also available in white by the way. Nothing is going to remain clean in our UK weather, eventually the insects will invade and the sun and rain will weather it down. Are pikeys still cutting tethered cables for the copper and how easy is it for someone to open and remove the unit, are there any theft deterent screws?
Interesting to know if the zappi has the load management that the hyper volt has?
It does. There’s a CT clamp meaning it will ramp up or down depending on use elsewhere
Hypervolt also connects to broadband, with 40 ms latency, the fastest in the game :)
I did think he fudged that somewhat. The fact that you have to buy an extra piece of kit to make the Zappi work not only adds to the cost but it’s more “stuff” in the house - a big minus point for the Zappi in my opinion.
I also felt introducing the Eddi was a massive red herring. If you want to heat hot water from solar, there’s nothing stopping you having an Eddi as well as a Hypervolt to charge your car.
Yes, but put a screen on the device and let it work without the App. Throw an access fob(s) in for a all-around class leading charger. I'm only going for the Zappi because I can use it without the App, but I really wanted the Hypervolt. Make my dream version and I'll never go with anyone else ;)
I like the hypervolt so far, the only 'big thing' which I like the Zappi for better is the user display. So e.g. a visitor could see how their car is charging without needing to be given access to the app. Also, what happens if the app is down? If MyEnergi integrated their hub within the Zappi or the Eddi, it would remove all the faffing about, and the built-in controls might occasionally save the day if you're internet connection is down.
Hypervolt - easiest by far, but risky over-reliance on the app and the user being web connected. The "apple" version of e.v. chargers
Zappi - really good, but the connected side is 'clumsy' and needs work on the integration - would still be my first choice mainly because of that onboard display and controls.
Thanks so much for your comment!
If the app is down simply pull the power cable out of the hub and wait 5 seconds and replug! If that doesn't work, contact myenergi!
The Zappi’s screen has all the finesse of a 1990’s Game Boy.
@@TheWhiteLife But the Zappi screen has loads of actual information! If the internet is down it doesn't look like the Hypervolt can tell you anything.
@@TheWhiteLife don't knock it, they still work. Who can say that about a ten year old iPhone?
Interesting overview. Thanks.
Isn't the Zappi meant for homes that have a TN-C-S/TN-S arrangement as it is the only charger that has a built in RCD and PEN fault protection?
There's loads of chargers with RCDs and pen fault built in....
@@heladas90 Apart from Zappi and Hypervolt what other brands contain built in RCDs and PEN fault protection? A Google search doesn't appear to show me much
@@AtrioxIsBanished Sync EV
Hypervolt has RGB - end of debate
Can they be customized to 1 colour?, last thing i want is rainbows on the front of my house
Max 360p??
Interesting to know
Either is fine for me, but how come companies aren't providing security features, the last thing you want is to go away for a week and random ppl start charging their cars. A simple fob feature or card reader would be perfect. Hypervolt also needs a screen because you need a means to work the unit without the App. Once the broadband goes down, I assume the hypervolt goes stops working but the Zappi would keep going?
Hypervolt can be locked via APP & Zappi by pincode.
Which charges your vehicle the fastest? As anyone done that type of comparison?
These aren't really chargers, the chargers are actually on the car and these feed electrons to the charger so the speed of charge will depend on the speed of the charger in the car
The Max feed is below 7.5kwh, this is because your home is feeding power in DC format, which is deliberately capped. Your car automatically knows this and blocks itself from accepting a higher rate. So it doesn't matter which car you use, it won't accept a higher rate. Some older homes can allow upto 11-22kwh based on their 3-Phase setup, which allows more power through. Practically most homes are single Phase and capped. AC chargers you see at petrol stations can generate higher rate feeds, which is why cars can still accept upto 100kwh or more.
Zappi needs version 3. it looks outdated.
Zappi is having major reliability issues at the moment.
Thanks! We only provide the best.
In what way? We have fitted over 200 this year & the fault rate is less than 1%
@@humphreybradley3060 My one gone 'pilot problem !' Back to using a granny charger
Can you use your own cable with the hypervault?
No, it has no other option right now, but at the price it's fine tethered. Just wrap the cable around the unit, as there's enough space for a cable length up to 7m. You can choose which length cable you need.
@@jaymrree839 Hi thanks for the reply. I find the tethered ones look a real mess with the cable flapped around. I went with the Easee charger, which is tiny and very well designed.
@@mw5360 Hi, if possible could you post a link to the one you ordered, it would be great to check it out