How to Replace Ring and Pinion 09-14 Ford F150
HTML-код
- Опубликовано: 25 авг 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/30/x/...
In this video, 1A Auto shows you how to replace the ring and pinion. This video applies to the 09, 10, 11, 12, 13, 14 Ford F150
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oaby/1A...
• Pry Bar 1aau.to/ogI/1AX...
• 10mm Wrench 1aau.to/on8/1AX...
• 12mm 12-Point Socket
• 12mm Socket 1aau.to/oX2/1AX...
• 21mm Socket 1aau.to/op7/1AX...
• Bearing Separator
• Brake Caliper Hanger 1aau.to/oJ/1AXA...
• Harmonic Balancer Puller 1aau.to/os/1AEH...
• Press
• Torque Angle Gauge
• 3/8 Inch Air Impact Gun
• Air Chisel 1aau.to/on/1AXA...
• 1/18ths Socket
• 1/2 Inch Socket 1aau.to/oac9/1A...
• 3/8 Inch Socket 1aau.to/oac9/1A...
• 1/2 Inch Breaker Bar 1aau.to/ojH/1AX...
• Ratchet 1aau.to/oac9/1A...
• Socket Extensions 1aau.to/oX2/1AX...
• Torque Wrench 1aau.to/otD/1AX...
• 3/8 Inch Wrench
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ogS/1AX...
• Gear Oil
• Liquid Thread Locker
• Marker / Writing Utensil
• RTV
• Rust Penetrant
• Safety Glasses 1aau.to/oac/1AX...
• Center Punch 1aau.to/och/1AX...
• Hammer 1aau.to/ojV/1AX...
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/obI/1AX...
For More Info visit us at 1aau.to/h/bxw/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
In other words, I’m going to hire someone to do this for me.
Now how about a video for the front differential for those of us with 4WD?
Helpful video. I’ve cut cages and air chiseled plenty of bearings off even at the dealership. Since he wasn’t reusing the ring and pinion it doesn’t matter if it gets nicked anyway. You can feel the pinion turning and get it right without a torque wrench but I still like checking myself with one anyway. If it was me doing it, I would’ve put the pinion in without the crush sleeve and seal until I had a good pattern.
Nice job. Provided clarity on how to perform the job. Good explanation on the backlash and shim usage. Was considering doing a gear replacement in the garage. I hesitate to do this job myself after watching. My mechanical luck the pinion shim will be wrong size. With a 4x4, going to find the transfer case gear swap next.
This level of detail and careful explanation is exactly what I need. Huge help you are. But I could concentrate better on what you're saying without the annoying background noise (I mean music).
The man has skills... mercy
+Mark B Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com:
1aau.to/m/Shop-1AAuto-c
Very detailed video thanks. Whats the diameter actually for the raptor 2012? Thanks
very informative, just be ready to turn the volume down for the commercials
+John Cramer Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
You didn’t pack the bearing with grease?
This is great. I really love 1A Auto. Where can one has an access to this 1A Auto? Thanks
How many hours to complete task
Estimated man hours for this procedure should be ?? That’s the question
Does anyone know if you change your gear ratio on your truck should you change install a torque converter with a different stall speed or does it affect your torque converter at all
Hi I'm having a major problem I have a 2016 Mustang GT track pack went to purchase a new pinion and crushed sleeve but the ones they keep pulling up for my car are too small to the one I took off the 1 in your video I googled because the numbers on my rear and differential are coming up for a Ford F150I was wondering if by chance forward would make a mistake and put the wrong rear end on my car and F so how would I go about finding that part number for that pinion for an F150 to cross over to my car
My truck had a 6” lift and 35s when I bought it, any way to tell if someone’s already changed the gears?
I got the same problem with my Ford raptor. When I stop and when I go . Can Sam body heop me whit that noise. Thank you
+Guadalupe Ruben We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
How much is a reconditioned differential for Ford f150 2012
How does a gear mechanic not have a rotational torque wrench?
That pattern was not good, he should have pulled the pinion and added more depth.
This is why I do all my own gears.😮
Don't you have to replace the pinion after you gouged it out with the saw ??????????
I had mine redone for about 800 and it made the same noise out the door. Kind of annoyed by that…
+Louis Steltson Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
whats a ballpark cost for this ,my mechanic is saying close to $2000...ouch
I got a quote of $2500 but that included a detroit locker and new set of gears. 4wheelparts is who quoted me.
Sounds right if your doing a 4x4
Wow, I’m planning on lifting my truck for bigger wheels.... not sure if I want to attempt this nor pay $2k