How to Replace Fuel Pump Assembly 1998-2011 Ford Ranger 2.3L L4

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com 1aau.to/ia/1AFP...
This video shows you how to install a new fuel pump module assembly from TRQ on your 1998-2011 Ford Ranger (2.3L L4).
This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obGc/1A...
• Pry Bar 1aau.to/o8J/1AX...
• 8mm Wrench 1aau.to/ojT/1AX...
• 10mm Socket 1aau.to/obGt/1A...
• 12mm 12-Point Socket
• 13mm Socket 1aau.to/ob6P/1A...
• 8mm Socket 1aau.to/obGt/1A...
• Pliers
• Ratchet 1aau.to/ob8q/1A...
• Torque Wrench 1aau.to/obaL/1A...
• Cloth Rags 1aau.to/oNH/1AX...
• Gloves 1aau.to/oa4J/1A...
• Marker / Writing Utensil
• Safety Glasses
• Transmission Fluid
• Brass Punch
• Drain Pan
• Floor Jack 1aau.to/oawV/1A...
• Jack Stands 1aau.to/oaiW/1A...
• Pick 1aau.to/o3p/1AX...
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@SsdBlig]

Having just done this on my 06 Ranger, it's MUCH easier removing the bed, for full open access to the top of the gas tank. No underneath work needed.
Remove the 3 screws of the filler neck, remove 6 attach bolts in the truck bed, and disconnect one connector going to the tail lights.
Then either slide the bed back, or 2 people lift it completely off the frame.
Full fuel pump access at top of tank. Very easy.

What a joke. Take the bed off. Whats with the jacking it up and taking straps off. Nobody does that on a Ranger.

[@jerrygiles1661]

Fantastic instruction!!