Razor E100 Troubleshooting
HTML-код
- Опубликовано: 28 авг 2014
- Razor E100 Troubleshooting. This video covers the most common problems with the Razor E100. James, here at wildscooterparts.com shows you how to diagnose and fix the scooter!
Авто/Мото
Авто/Мото
*I am loving the **Latest.Bike** Scooter , it’s sturdy, safe and well-made. It gets me from point A to point - B- in a good record of time. ?????*
Thanks for this advice 🙏I just fix my daughter's scooter on my own, she is so happy 😊
I had an E100 given to me by a friend. It is set for a quite a while in the batteries were dead. Put new batteries in it still didn't work. I almost gave up and threw in the trash, then I found out from your video that it has the kickoff requirement. I had no idea! Thank you!
OMG I just bought one at the Goodwill! $24 with no charger. I had an extra one at home.
So I was trying to find out why no one bought it!
Trying to see if anything was loose in wires!
Then I came across your RUclips! Voila!
Works! I got a steal!
I love it!
Pretty rough on the asphalt I wish they had a wheel softer for bumps
Because of your video I was able to diagnose my sons scooter. Nothing's worse than unboxing a defective gift xmas morning. Thank you gentlemen for putting a smile back on my sons face. FYI it was a failed brake switch.
-Chiefs Kingdom
I'm saying this in the most masculine way I can. You are my hero bruh! I bought an e175 for my son from the goodwill. the light would come on but nothing. I replaced the batteries and I would get a click but nothing. I was ready to put it on the curb but decided to do one more search and came across your video. I didn't know about the kick start. Thanks! My son will be excited when he sees it
Thanks guys. I just watched your video 6 years after you posted it and found the problem was me not reading directions. Rolled the back wheel while holding down the throttle and bam it worked.
Thank!!! The spinning of the wheel got my razor scooter, running!💯
great video i was pulling my hair out bought new battery's still nothing then i though motor was stuffed nealy through it in the bin then as a last resort checked your video out it was the brake switch did the paper clip it worked thank you so much great video cheers guys saved me buying another one for my son now i know how to fix it in tbd futer thank you do much from down under Australia
Thank you so much. Bought as a Christmas present and couldn't get it started until we watched this video and did the kick start. Happy child now.
Thanks for putting this together. I did not know about the kickstart, so that helped me out a lot.
Thanks for this video. It helped me a lot today!
I replaced a failed module for a used E100 that I got for my son, and I could hear the relay click, but it wasn’t starting. The “kick” thing did the trick. Thanks!
Great video guys! I replaced the batteries and heard the click without spinning the wheel and thought something was amiss! Thanks for clearing that up, much appreciated!
You guys rule! Love the video and have a good reference point going forward. I bought 3 scooters from Dirt Cheap while traveling cross country. 50 bucks for three of them. - 2- 195's, and 1 -95. These will make a great gifts for the grandkids.
Thanks guys! Very informative and was the exact information I needed to repair my sons scooter.
You're the man thank you sir I appreciate you putting in the time to help your fellow man . With your information I was able to get an old scooter running from my grandson thanks again
Thanks for this video - helped me sort out brake switch and controller testing. Turns out after battery replacement, I just didn't kick off hard enough. Rookie mistake that you shed a spot light on as others here have noted.
Heading out to mantown when sun comes up to rethink my broken e100. Good video.
Found your website detailing this troubleshooting, glad I did. I was really thinking the controller had gone out on my son's E100 glow. Tested everything I could without your info. Controller clicked when twisting the grip so that switch must be good right. I was so wrong!
Took the grip apart and found 2 separate switches. One closes as you start to twist, the other at the stop point. I could see the second switch wasn't getting pushed in at all by the grip when twisting. Had to remove it from the handle bars to get it apart to figure out what was causing not to move enough. Once I did get it apart a small piece of plastic fell out. Took a minute to figure out it was a clip to hold cover on. Put it all back together and it works great. The screw in the cover keeps it together pretty good without the clip
Excellent explanation. You made a lot of folks happy , and probably , saved them money too.
Much appreciated ,
Thank you!
You did a really good job on troubleshooting after I seen your video I had mine fixed in no time thanks for taking the time and sharing your know how
Awesome video. I think you guys just saved me a hundred bucks. Thank you!
Thank you! I haven’t tried these suggestions yet but i will soon. You explained this very throughly and I appreciate you guys for doing this video.😊
Thanks guys. Very informative. Much appreciated. I thought it was broken, but found out it needed to be kick started.
Right On! It was the KICK that I wasn't doing. It looks like my old controller was good after all! Thank you coolermods!
Thanks guys! This was extremely helpful!
Great video! You are a life save for my son! Thanks
Thanks guys. Great job-very helpful.
We really appreciate this video, thank you
Very Helpful, got mine running with this Information.
the kickoff requirement blue my mind! so simple but necessary
Great video chaps... very easy to understand thanks
wow. this was a very good video to teach me (an old 62 yr old lady who found a practically brand new Razor 100 in the bulk trash :) ) I bought a charger, but like this one, the light lit up but no 'click'. So now I am going to try to spin the tire off the ground. Thank you for being SO concise and easy to follow. Thanks :) I guess the only other thing I can do is check the connections and the batteries.
Lol you sound so awesome
Great video, very helpful..I have been trying to fix one of those Razor scooter for few day now..I isntalled a pair of fresh batteries and I was stunt by the fact that it did not work..That is until I watched you video and I realized that it needed a kick stat.Keep the good work..
Thanks!
Thanks! This video is Gold. Awesome man, awesome!
Well done and easy to understand
The power if youtube hasent failed me yet thank you i was getting mad that it wasent working till i found this video and found out i needed to kickstart it i git mine at a garage sale for 15 bucks now i know its not broken
Great,Nice smooth explained....thank you very much
Cheers 🍻 from Denmark 🇩🇰
shut it
Wow thank you. Thought the one I just got out of the garbage was broken but I just didn't know about the kick start.
Thanks dude your video helped me out !!!!
Thanks cant wait to fix!
so helpful thankyou had to fix my daughters scooter
Thx! saved my life!
Great job james
Great vid, thanks for the help.
I wish I would have watched this earlier!! my buddy have me a e100 that he got from the trash. he had it for a while and couldn't get it to work. so he gave it to me... after getting everything setup correctly, I tested everything. starting from the battery to the control, to throttle, etc... all was good up to the the motor connection. I had already tested the motor. it was good. so I jumped to the conclusion that something in the control was bad. short story; I ended up direct wiring from battery to the throttle, straight to the motor (with a inline fuse also in there). it worked! but after watching this... it probably just needed to be push started.
on a side note - the scooter didn't come with battery's but we had 2 12v that work fine. but they are bigger than the housing. so now I have to modify a box to hold them.
very informative video though.... I just wish I seen it earlier.
I like this video compared to all the rest that says do buy or the motor is bad good tip on this video thanks
Thank you so much! Life saver
great video! Thank you.
Very very helpful thanks 👍
2:29 you can usually find a coupon for a FREE meter at Harbor Freight. I have about 10 of them spread between my house and cars.
Great info, thank you
Thank you i was able to fix my scooter,
Very helpful thank you 😊
Wow this was great my scooter works now🙏🏽👍🏽
Awesome video
Nice job!
Excellent - solved my problem
Really really helpful
Thanks for video, please post info to check throttle switch, it has 4 wires.
Great video guys!!! the only issue you did not cover though.... Got 26 volts on the batteries... what about if you don't get the click at all? Does that mean the control module is bad?
Thanks
great video and a newbie question about my 200 scooter. does it push start and does the paperclip work for it ?
very helpful - thanks
Immensely helpful
Hey, thanks for the video and scooter tips. I was at Goodwill the other day, and picked a mint condition A175 scooter for, um, just $3.00 dollars. The switch light would come on, so I knew the batteries had some juice. And it "clicked" as you described in the video. I opened up the top cover and tested the batteries, and they seemed to be full charged. Even the charger I tried, that goes to the Razor Go-Kart my boy owns, showed that it was "charged." But it wouldn't run. Hmmm, what might be the problem? Well, I was not aware that you had to get the wheel moving first, before the motor will engage. Anyways, the scooter works great! Thanks for the advice about the need to kick starting the unit. :)
+peterpulpitpounder I thought I needed a new motor for my son's E90 when he got the chain stuck. Turns out I had forgotten about the kickstart needed before the motor engages.
peterpulpitpounder a Word of caution if you haven't already discovered it. The Razor wagon Charger may look like the same 24 Scooter charger but I have seen it as being a 12volt charger. So while you successfully got the scooter working by kicking it off, it was because (as you said, fully charged upon purchasing it at Goodwill. As soon as it needed to be charged again, the wagon battery would not do the trick if it was indeed only 12volt. Hope that helps you or somebody else. I bought a used e100 scooter at the flea market and it had a 12v Razor charger with it. I looked the charger up on eBay and it pointed to the wagon. Buying a 24v charger fixed my $15 find.... Your $3 find was an awesome score!
Hi...Thanks for making this video. I did not know about spinning the rear wheel to kick start it until you mentioned it in the video. I connected the battery charger, it clicked, and then I spinned the wheel and it started up. My question is do I charge the batteries using the battery charger with the switch in the on or off position on the scooter? Thanks P.S. I am hoping this charging works because the scooter has not been charged in years. If it does not charge, I will use the multi-meter to see the voltage.
Good stuff!! Thank you
I found one that looks exactly like the one you are featuring here, missing the foot plate and straightening bar, any ideas where I could find one?
Good job!!!
Thank you. What if the controller is bad?
I'm new to electric scooters and a neighbor bought a Razor Metro Electric Scooter on Craigslist but the previous owner lost the charger. Thank you! I own a few multimeters but just use them for basic voltage testing and continuity so your video was easy to follow. The fist charger I ordered was a three pin female plug but it needed to be three pin male. Ordered a second plug / charger but the batteries don't charge. Then I charged them individually to 12.x volts but I just got a clicking - I spun the tire both ways but still got the clicking. I pressed the brake a bunch of times too. Then based on your video I took it out and magically it worked.
Question: I was thinking about ordering new batteries of higher capacity. I have a welder so I could add a side battery box. Any thoughts on this?
hi there could i put e100 front wheel on e90 as i dont feel e90 wheel is very good thank you great video
I just bought an E125 and an E175 for $6 each at Goodwill. No charger though. Both switches illuminate, but there is no relay action. I am assuming my first step would be to check battery voltage? I have a 24V .5 amp power supply I can use to charge them as well. What was the current on the original power supply?
Hi,my e100 powercore scooter goes really slow after it is charged,doesn't go fast like it used to,what could be the problem thanks!!!
I just picked up a 1st generation E100 with the thumb throttle and belt drive. I am getting battery voltage reading at the charge port. I am missing a diode on the charge port. What is the value of that diode?
Thanks for the video now my Razor scooter is running👍
Do the circuit breakers ever go bad? I bought a scooter from a guy that had never been out of the box but had sat awhile. The batteries would not charge. I had it apart and was trouble shooting it and never could find anything. But, when I put it back together just messing with the breaker it started working. And worked a few months. Now would t charge again.
I have an E100 early model belt drive. The control module (4-connections) is bad, can I use a later one and just use the connections I need? Also could I use a later 4-pin twist throttle and just use 2 pins? Thanks for any help. Andy Wittenborn
We have a black Razor power core e100 that has stopped running. Voltage is 26.2, relay doesn't click, brake, throttle, fuse/breaker ohm measurements are all good. Ohms of the motor is almost zero. While sitting on the bench i turn the throttle and give the wheel a spin and it runs. When on the ground with a load, the motor doesn't take off. Any ideas?
interesting video I am trying to get my E175 running
Can you help. I have replaced the batteries as the scooter was not going fast at all!. And it's still going a lot slower than it did when we had it. Any idea's what the problem could be.
good day guys,, i have 1 e 100 razor it is fully charged it turns on but has no "click" on the controller when i hit the throottle,,, any ideas? do i need to change controller or even the motor ?
Hi my e100 scooter is running but soob loses power. It wont pull for long stretches once in use my daughter has to keep using her foot to kick on any ideas?
Hi bought the controler that you sell and extra batteries from Amazon just in case, but I still can't hear the click, I already check the break circuit and tested it, the motor does work when I connect it directly to the battery, I don't what else to test - is it possible that the replacement module that I got is not good? anything else I can check? Thank You
is their a way to fix it back to where you do not have to kick start it?
So far, this is the best video on Razor electric scooters that I've seen. Very informative & it was clearly delivered.
I have a question, though. I accidentally connected the negative wires on the positive poles of my batteries. And, I also did the same with the positive wires to the negative poles. When I switched my scooted on & hitmthe throttle, the motor didn't turn & I also heard a pop. What happened? How can I fix this? Please help me. Thanks.
Pam Sorilla You blew a fuse or the controller
My e300 will stop after few second because the relay will go off. The throttle the controler box are new, any input?
ty so much i was stump pushing it at same time throttle it works
We have a model A 2 and within six months it’s stopped working. Recently purchased a replacement battery and it’s still not working so what could it be?
I checked my batteries and they were fine. I then connected the batteries directly to the motor to bypass the circuitry and the motor would not run. Is the motor supposed to run when directly connected to the battery and do you think the motor needs to be replaced?
I have one brand new from store had bad battery's...razor sent new batteries and it worked, but it doesn't work properly...the reset button constantly trips. I have two identical scooters and the kids fight over them because one works good and the other always trips out...any ideas? My daughter is light and it trips out on her so it's not a weight thing. Thanks
Do you all have a troubleshooting video for the E200?
there is a gentle 1 mile long hill at the bottom of my driveway. can I ride my e200 downhill with the motor off to conserve batteries, or is that bad for the motor?
This helps alot
Hi What is the Charging Voltage for the 2 SLA's in series, I ask this is because the Max charge of an SLA after cycle is 13.8 which makes 27.6V. So do the Chargers that come with the scooter put out a lower voltage (26V) as per your statement of 13V per Battery. So what is the MAximum Voltage this Scooter controller can Handle? Thanks.
My daughter managed to snap the throttle cable in half, it has 2 orange and 2 brown wires...are they specific to each wire or can i just reattach them to either orange to orange and brown to brown?
hi. have you ever come across a bauman electric scooter? I have one which I am having trouble to get started. any advice would be more than welcome.
thanks in advance.
Hi, my scooter will charge but only move for 10mins. Not sure if its the battery. Thank
Any ideas why my e100 decides to just stop? It will go then after a few yards it will just stop but if i press the reset button and kick off it starts again 🤷♂️
is there any way to fix the fact that you have to kick off?