Great stuff! I personally think the overrider looks fire - since the edges give it a bit more of a rugged 'offroader' look, that goes really well with the meaty tires and the roofrack. Regardless, keep 'em coming!
Dude never run your winch without your engine running. The winch requires certain amperage, so if your alternator is not charging the battery you will over heat and melt wiring.
Last time I offered him some advice I got shut down. He will learn one way or another. Love the channel and builds, just feel as if he should be humbled and learn from people who have made the mistakes for him so he can succeed.
@@bendaff9618 I informed him about his rear sway bar. He stated that because he saw in one location that his placement was correct, that he was right. However the reason they have the bend is to wrap around the diff so you don’t bottom out over trails. But if he only uses as a camping rig and not an off road rig then he’s fine the way he is 🤷♂️
Looks awesome! If I can recommend, the bull bar should be reversed, where the bar faces forward! Try that out and see if you prefer the look. It's meant to protect your grill. And hopefully you pre-tensioned the rope? Again, awesome look! I'm jealous!
This looks so good! Personally liked the overrider, but it's nice that you can change whenever you feel like it. You should really keep your engine running while using a 360A load tho. That kind of drain can kill the battery when over time :s
yea I had it on when I was pulling myself back in, I was focused on filming and I forgot ahaha. Definitely cool to be able to change the override back and forth tho!
Robbie the jeep looks amazing! i think that the bumper looks best without the overrider. and those HOOKS they are BEEFY damn! im really lovin how this build is comin together!
Be careful. Should never stand in front or behind the strap when using the winch. If line snaps it could spring back. Could kill you. Be safe. You should get weights to put on the cordage. That way if it doe snap. It will be a lot safe.
@@alejandrogutierrez4725 I've seen synthetic rope "snapback" op is right: you should stand between the vehicle and thing the winch is attached to at a distance from the line equal to the length of line spooled out to form a triangle. Goes for pulling with any line.
Make sure you unspool the entire line and then spool it under load to cinch the wionch line onto the barrel. On flat ground will be fine it just need to be wound the first time unter some light tension to set the line correctly. Make sure not to use it to pill something very heavy ort a high load until you do that so you dont damage the line or pull it out of the barrel.
Came across your channel when you did the garage make over and followed your Jeeps journey ever since. I love my 2 door JL but time to move on to someone more practical for life but still in in a 22 Taco. As much as I’ll be watching some taco builds and work I’ll be staying tuned to this adventure and build for sure.
I can’t wait to buy a Jeep Wrangler someday. Seeing how stoked you are about adding extra new parts to the Jeep makes me feel like that’s how I am going to be. Awesome!
Can't wait for the "get stuck" video lol... make sure you got all of our near by Ontario Jeepers phone numbers on standby :P haha! Great job installing that bumper and winch, looks awesome!
Robbie... the tow strap and wheels... the reds don't match 😂😂😂 I'm sorry, I just had to. Man I miss that civic, definitely looking forward to when the time you get bored of the jeep and hopefully start on the eg. Keep up the good work!
Hey robbie, they sell weighted blanket type things that you put over the steel cable when your pulling. That way, if your cable or strap breaks/disconnects, the metal hook isnt whipped around under all the tension the winch put in it. Big safety thing. It will still whip but the weight will help to absorb some of the energy, and the hook wont fly near as far
Looks amazing without the hoop but also looks amazing with it love how far this jeep has come since you first got it and love how happy you are with it honestly your choice on which one you run like you said you can always swap if you need. I thing I highly recommend for your winch is look into either just buying a winch blanket or buying a kit that has extra shackles tree trunk protectors and all
Great vid. Good to see the couple of snags you found during install. I'm getting this bumper, but I want to pair it to a Warn zeon 10,000 so gotta wait a little longer for the $$. Your rig looks dope. I'm running 37s, with a manual tranny and you don't lose much power, just gas. I'd recommend. 37s look awesome, and they make a big difference on the trail. I've got a Rubicon which I think is more tolerant of going bigger with the tires. Good luck!
It's turning out SICK! This whole build made me want a Jeep. The gas prices obviously hinder me, I'll keep the Civic Aerodeck and live vicariously through your Jeep content for now!
Robbie, the real fun part is fabricating pieces to work with the build. Making brackets to have your fog lights mate up to the buckets so they look correct. That's what I like about a build, figuring out how. Robbie you decide what looks good on your Jeep !
Hi Robbie loving the content and your general vibe, really happy for you. Since you bought the Jeep I noticed you ve been worrying about your clutch. I d consider changing the way you think about it. A clutch is smt which is designed for such use and when offroading or towing letting your clutch out quickly puts a lot more stress on the rest of the drive train, drive shafts; axle shafts, universal joints, etc. Which overall cost a lot more to replace than a clutch. Btw I'm from across the globe, from a tiny country called Malta and my daily driver and offroad beast is a Land Rover Defender. 😜
I've been looking at Venator for my '22 Rubicon. Lots of ppl removing the metal hook, just one less thing to go wrong. Also I prefer w/o overrider. Looks better and 1 reason I'm interested in Venator is winch is recessed
If you're going to tow or pull someone out or yourself get yourself a jerk rope that stretches, they are awesome for this. and get yourself a come-a-long as well so if you're into something that might burn out your winch or break your synthetic rope you will pat yourself on the back for the purchase. And things look great but don't forget to paint the brackets you made for those lights to protect against rust. and get the bumper for your winch rope to stop it and keep it looking clean.
Bumper looks amazing!! I really liked it with the overider! What do you plan on doing with the take off bumper? I have an 07JK that I am modifying and that bumper will go perfectly!
The overrider may be good if your stuck in water/mud that’s very deep because then it’s a faster process to grab the shackle and go kinda thing so you can get the vehicle out of the water/mud ASAP
Robbie if I want a good bit of advice I would recommend you to stay with the 35s as 37 will make you keep breaking half shafts and you will feel a big power loss from the engine but at the end its up to you because I know 37 would look amazing bro
I like that top bar actually ! Looking goofy without it? You should look into some tire chains or “ladders” because trying to pull people in winter Jeeps are just too light weight
May I ask what kind of wheels you have and the color in the center, looks like a candy apple Red or something , o and the size of the wheel and tire lol Great videos keep it up
Great stuff! I personally think the overrider looks fire - since the edges give it a bit more of a rugged 'offroader' look, that goes really well with the meaty tires and the roofrack. Regardless, keep 'em coming!
I agree I think it actually looks really nice with the roof rack
Man I love the little DIY bits you always add on, like the good ol days
Dude never run your winch without your engine running. The winch requires certain amperage, so if your alternator is not charging the battery you will over heat and melt wiring.
Last time I offered him some advice I got shut down. He will learn one way or another. Love the channel and builds, just feel as if he should be humbled and learn from people who have made the mistakes for him so he can succeed.
@@Prodigy_GP what do you mean you got shut down lmao he probably just didn't see
@@bendaff9618 what do you think that means? Not hard. Damn kids these days
What would the alternator running have to do with wire temperature. You're draining the battery of course but not even remotely melting anythingy dude
@@bendaff9618 I informed him about his rear sway bar. He stated that because he saw in one location that his placement was correct, that he was right. However the reason they have the bend is to wrap around the diff so you don’t bottom out over trails. But if he only uses as a camping rig and not an off road rig then he’s fine the way he is 🤷♂️
Looking forward to seeing the other cars soon!
Looks awesome! If I can recommend, the bull bar should be reversed, where the bar faces forward! Try that out and see if you prefer the look. It's meant to protect your grill. And hopefully you pre-tensioned the rope? Again, awesome look! I'm jealous!
This looks so good! Personally liked the overrider, but it's nice that you can change whenever you feel like it.
You should really keep your engine running while using a 360A load tho. That kind of drain can kill the battery when over time :s
yea I had it on when I was pulling myself back in, I was focused on filming and I forgot ahaha. Definitely cool to be able to change the override back and forth tho!
Bumper looks really good!! The red shackles go with your rims really well
LOVE THAT YOU SHOW YOUR EFF UP! GOOD FOR YOU BROTHER
Robbie the jeep looks amazing! i think that the bumper looks best without the overrider. and those HOOKS they are BEEFY damn! im really lovin how this build is comin together!
That stock bumper falling off made me LOL! 😂
Be careful. Should never stand in front or behind the strap when using the winch. If line snaps it could spring back. Could kill you. Be safe. You should get weights to put on the cordage. That way if it doe snap. It will be a lot safe.
That’s if you have a cable, the synthetic rope will not spring back, it will just fall.
@@alejandrogutierrez4725 really? That's really cool. Thats kinda awesome. I never heard of it. Now if I ever get a winch. I will be sure to use it.
@@alejandrogutierrez4725 I've seen synthetic rope "snapback" op is right: you should stand between the vehicle and thing the winch is attached to at a distance from the line equal to the length of line spooled out to form a triangle.
Goes for pulling with any line.
Make sure you unspool the entire line and then spool it under load to cinch the wionch line onto the barrel. On flat ground will be fine it just need to be wound the first time unter some light tension to set the line correctly. Make sure not to use it to pill something very heavy ort a high load until you do that so you dont damage the line or pull it out of the barrel.
Came across your channel when you did the garage make over and followed your Jeeps journey ever since. I love my 2 door JL but time to move on to someone more practical for life but still in in a 22 Taco. As much as I’ll be watching some taco builds and work I’ll be staying tuned to this adventure and build for sure.
If 'fire' means good then I agree with KH, it looks good/complete with the bully bar!
I like the overrider. Adds a little beefy-ness to the front. Cant wait to see you get it UNstuck 😂
I like it with the overrider on IMO it ties the look nicely to the fender flares
Overrider looks sick, I’d keep rocking it
That looks sooooo good....thanks for what you do...I'm about ready to buy a JL soon. You're giving me great ideas.
The overrider was sick!
Robbie bro I love the content, and I’m not trying to complain about it - but do you think we could see some work on one of the summer cars soon? 🥺
Man this thing is coming together beautifully!🔥 I can't wait to see what's next. Also I personally like it without the overrider. 👌
Awesome video! Just got the 12.5 winch for my rubicon. I’m looking to run a battery switch as well
I can’t wait to buy a Jeep Wrangler someday. Seeing how stoked you are about adding extra new parts to the Jeep makes me feel like that’s how I am going to be. Awesome!
Love the jeep build, I recommend zip tying the d rings so they don’t loosen up and fall out while driving, happened to me
I agree with you it looks better without the override for sure
Can't wait for the "get stuck" video lol... make sure you got all of our near by Ontario Jeepers phone numbers on standby :P haha! Great job installing that bumper and winch, looks awesome!
Lights are perfect for that bumper, would've looked off without them!
Robbie... the tow strap and wheels... the reds don't match 😂😂😂
I'm sorry, I just had to. Man I miss that civic, definitely looking forward to when the time you get bored of the jeep and hopefully start on the eg. Keep up the good work!
I like that look with shorten bumper, man great colour combos
Hey robbie, they sell weighted blanket type things that you put over the steel cable when your pulling. That way, if your cable or strap breaks/disconnects, the metal hook isnt whipped around under all the tension the winch put in it. Big safety thing. It will still whip but the weight will help to absorb some of the energy, and the hook wont fly near as far
Looks really good! Can't wait to see it working 🤟🏻🤟🏻
The jeeps coming all together now can wait to see more
Just installed something on my front bumper today too!! Looks good!!
Looks amazing without the hoop but also looks amazing with it love how far this jeep has come since you first got it and love how happy you are with it honestly your choice on which one you run like you said you can always swap if you need.
I thing I highly recommend for your winch is look into either just buying a winch blanket or buying a kit that has extra shackles tree trunk protectors and all
Great vid. Good to see the couple of snags you found during install. I'm getting this bumper, but I want to pair it to a Warn zeon 10,000 so gotta wait a little longer for the $$. Your rig looks dope. I'm running 37s, with a manual tranny and you don't lose much power, just gas. I'd recommend. 37s look awesome, and they make a big difference on the trail. I've got a Rubicon which I think is more tolerant of going bigger with the tires. Good luck!
It's turning out SICK! This whole build made me want a Jeep.
The gas prices obviously hinder me, I'll keep the Civic Aerodeck and live vicariously through your Jeep content for now!
Robbie, the real fun part is fabricating pieces to work with the build. Making brackets to have your fog lights mate up to the buckets so they look correct. That's what I like about a build, figuring out how. Robbie you decide what looks good on your Jeep !
For winching it’s good have some pulleys even one is good you can do two to one just by hooking back to yourself
I’m really loving this build, Robbie! It’s fun to watch and it’s inspiring me to spend ALL the moneys on my JL 🥴 Excited to see what’s next!
Looks sick!! Sucks I am not that handy to get it my Jeep.
Would love to see you go offroading for a weekend and try trail climbing/rock crawling and camping
Ok i see you my boi!!! It looks fantastic!!!!! I love it!!!
We have been waiting since you announced that Jeep for this video! :D
Loving the jeep so far, but when will you continue working on the eg? 👀
Loved the POV shots
Glad to be back soon
Hi Robbie loving the content and your general vibe, really happy for you. Since you bought the Jeep I noticed you ve been worrying about your clutch. I d consider changing the way you think about it. A clutch is smt which is designed for such use and when offroading or towing letting your clutch out quickly puts a lot more stress on the rest of the drive train, drive shafts; axle shafts, universal joints, etc. Which overall cost a lot more to replace than a clutch. Btw I'm from across the globe, from a tiny country called Malta and my daily driver and offroad beast is a Land Rover Defender. 😜
Love the Jeep! I've heard the shackles is the pins can get stuck if they are on there for a while! Sick build though!!
Jeep is looking sharp!
I've been looking at Venator for my '22 Rubicon. Lots of ppl removing the metal hook, just one less thing to go wrong.
Also I prefer w/o overrider. Looks better and 1 reason I'm interested in Venator is winch is recessed
well done young man. really great video.
Looks great man. That bumper is a good look, definitely not enough people running the rugged ridge setup but I dig it.
Hell yeah bro this looks sick! Just imo the overrider is a must give the girl just alittle aggression without being overdone
Stop, you're making me want a Jeep 😭😂
You should get a factor 55 flat winch hook, you can get it in red which would match your wheels perfectly
If you're going to tow or pull someone out or yourself get yourself a jerk rope that stretches, they are awesome for this. and get yourself a come-a-long as well so if you're into something that might burn out your winch or break your synthetic rope you will pat yourself on the back for the purchase. And things look great but don't forget to paint the brackets you made for those lights to protect against rust. and get the bumper for your winch rope to stop it and keep it looking clean.
OVERRIDER!!!!! YES!!!!
run a high amp relay setup for the winch power and then you can use the aux switch to controll it
I like the overrider bar, but that's me.
Bumper looks amazing!! I really liked it with the overider! What do you plan on doing with the take off bumper? I have an 07JK that I am modifying and that bumper will go perfectly!
i think the overrider looks dope
Love it! Selling my truck to get a heep….😂
Hey bro... do u live in wasaga?
Hello, I love your content, I bought the same bumper but I want to remove the override, should I remove the side parts to access the screw?
Every mod the jeep Get I love it more and more
It looked like the overrider was backwards. I like it either way tho
Great videos! I picked up the same Vivid fog lights after your video... was it all hardware that rusted? What do you suggest to avoid rusting?
That looks pretty good low profile let air flow through the radiator
The overrider may be good if your stuck in water/mud that’s very deep because then it’s a faster process to grab the shackle and go kinda thing so you can get the vehicle out of the water/mud ASAP
I want to see the jeep passing some rocky paths or rivers
What I seen a lot of people doing is using a circuit breaker on the positive side to the winch
I think the front guard would look cool... And what if it would be red? 🤔
Should try a Yankum Rope, would be an excellent addition
Robbie if I want a good bit of advice I would recommend you to stay with the 35s as 37 will make you keep breaking half shafts and you will feel a big power loss from the engine but at the end its up to you because I know 37 would look amazing bro
How do you find offloading on a steep hill with a 6 speed? How do you maintain not moving backwards?
If those are the diode dynamic light can you tell me which bracket and which set up you used? Just worried which one is going to fit this bumper
YOOOOO.
You went to Mont-Tremblant, and you didn't tell me !! I live in Montreal 😭
I like that top bar actually ! Looking goofy without it? You should look into some tire chains or “ladders” because trying to pull people in winter Jeeps are just too light weight
Don’t get me wrong, I like the Jeep and all the content from the Jeep, but when do we get return of Jasmine and the S10?😄
The jeeps reminding me of the civic. The reds and grays don't match. Love the build tho man #staycommitted
Love the jeep bro, I’d go without the overrider personally. Excited to see if you have plans for the EG again.
That winch draws a lot of current. Best have the engine running while in use.
It looks insane. Personally i like the top piece. I love your videos. ❤️ (make garage banners and phone cases for sale on your website please😂)
Cant tell if this will fit my Mojave. Such a clean bumper
Surprised you don’t have the Mopar Black Matte Grill cover!
I have been eyeing this bumper, but read some reviews that its stamped metal and not strong enough for rock crawling...Any truth to that?
If only stubby bumper is allowed in Vancouver Bc, sure I’ll get the same
Looks great dude.
When are we going to get an update on the hot wheels wall?
Use the over rider, I think it looks good with it on
Please get a winch blanket! Especially when you said you want to stand by your tires and winch at 10:58!!
I know your feeling.
May I ask what kind of wheels you have and the color in the center, looks like a candy apple Red or something , o and the size of the wheel and tire lol
Great videos keep it up
It looks sick
She’s just a cheerleader 📣 haha 😂
I'd say without makes it look more "jeep-ish" but I'm not a jeep/truck guy. You do you.
Your amazing man 🔥
Like your vids! Where in Ontario are you from?
Ari the G 💯
Yo what’s up with eg I wanna see content on it make it stock but put nice wheels 😏👌