It amazes Me how many keyboard experts there are. Let’s see You do it & cover every single aspect of all winch wire ups. Yes there are somethings that could be done differently, but if You know that much about it, You make a professional video & post it on RUclips. If your not sure always disconnect the battery when working on your car/truck - basic rule I was taught in the Army. Good effort Jocko. Keep it up Man.
Great video Jocko! Just a handy tip when connecting and disconnecting things like this: when connecting, always connect the positive lead first and negative last. If you accidentally touch a ground with your spanner or ratchet you won't have a lightning storm on your hands. Same with disconnecting, always the negative first followed by positive last. Same reason as above. 👍🏼
Ive been looking to install my first winch. Will be going on my px2 ranger. This will be my go to vid for installation. The little things like finding a winch with a isolator switch and the housing breather are things I would of never knew to consider when buying a winch as first timer. Cheers guys I've learnt alot.
Thank you for this video and releasing it when you did. . Just bought a bumper and winch and hated that I was not going to reach the spool release without opening the hood. Took 10 minutes to rotate the end of the winch and now it’s set up perfectly in the bumper!, Many many thanks from central Kentucky.
So to tension the rope you literally just do exactly what was shown on the video? And the rope just feeds itself back in the drum that nicely? I read you need to move it side to side while tensioning it to get it to wrap on neatly so now I’m confused. 🤷♂️
Do you have any information on the installation of an air compressor and any maintenance of these additional tools such as the winch two way radio tyer deflator recovery kit and any thing else that I may have forgotten to mention thanks
So far my ultrawinch has gone through 2 solenoids a Bluetooth connectivity system and it now looks like the replacement control box I received to replace the ond that failed has the same issue just clicks won't go in or out
Depends on the battery and set up, mine is to the larger secondary battery. If you have a DC inverter charger system aka a Dc-Dc or isolator charger, then run to the main vehicle battery, if you have a high power split charge, run to either the starter or second battery, it doesn't matter.
Why woould you? The cable has the cut off to protect it. A fuse would only blow when the whinch gets close to stall, that could be in the area of up to 600A depending on the winch. Not seen too many 12v 650A fuses around.
Battery isolator needs to be easily accessible, so not under the bonnet/hood (for you Americans). It would also be good for a emergency stop button on the bumper side, and a cut off internally both possible via a relay. Stop button needs to be accessible from immediately in front of the winch incase anyone gets trapped in there.
Doing this exact install now. Video is incomplete. Standard switch supplied doesn't fit hilux switch panel without modification of the panel. Not enough detail of where the control box and wiring/plugs, suggest likely because it was ugly in the end. Otherwise a good vid.
Basically the Cut Off Isolator Switch is breaking the circuit. "Potentially" there is only current to the switch, via the 300-400mm of insulated cable. User activation of switch only supplies circuit current whilst in use, switched by user, then disabled by user. Current draw whilst in use is too high for circuit protection. Basically, it's a user beware situation, monitor whilst in use and utilise Isolator switch to eliminate any pending arising issues. When winching finished, isolate circuit again at switch.
If it fails for some reason in the in feed position, it could cause a catastrophic situation, maybe even when you are not around to witness. Like maybe a sticky solenoid doesn't fully disengage.
i personaly have never done a isolater with a winch install but i can understand where they may need it. it would great as an emergency stop or if there is a short somwhere, you can shut it off and save the car from going up in flames. my last winch i did was faulty and got stuck in the retract position over night. it jammed up the rope, bent the fairlead tabs and drained the battery. got up the next day and had to take the other car to work🙄. sent it off and got another to replace it and all has been well. in saying that, had i used an isolater, i would never had known about the fault until i was stuck somwhere 😅 so im probably going to continue to do it that way. as long as my car starts, i know its good
It amazes Me how many keyboard experts there are.
Let’s see You do it & cover every single aspect of all winch wire ups. Yes there are somethings that could be done differently, but if You know that much about it, You make a professional video & post it on RUclips.
If your not sure always disconnect the battery when working on your car/truck - basic rule I was taught in the Army.
Good effort Jocko. Keep it up Man.
Great video Jocko!
Just a handy tip when connecting and disconnecting things like this: when connecting, always connect the positive lead first and negative last. If you accidentally touch a ground with your spanner or ratchet you won't have a lightning storm on your hands.
Same with disconnecting, always the negative first followed by positive last. Same reason as above. 👍🏼
❤good reviews
Ive been looking to install my first winch. Will be going on my px2 ranger. This will be my go to vid for installation. The little things like finding a winch with a isolator switch and the housing breather are things I would of never knew to consider when buying a winch as first timer. Cheers guys I've learnt alot.
Thank you for this video and releasing it when you did. . Just bought a bumper and winch and hated that I was not going to reach the spool release without opening the hood. Took 10 minutes to rotate the end of the winch and now it’s set up perfectly in the bumper!, Many many thanks from central Kentucky.
A quick afternoon install means 3 days of hopelessness and swearing😅
Didn't notice any rubber insulator boots for the live terminals on the underside of the isolator switch?
Surprised the cutoff switch does not come with caps to guard against an accidental grounding ⚡️
I didn’t need to watch this because I got a i30 lol just supporting the channel. Cheers guys.
Jocko, get around to insulating the terminals of that cut off switch, that's a spanner spinning fireworks moment just waiting to happen, haha 😂.
Nice vid Jocko, gonna need to see the n70 on a trip soon aye
Half of Australia will be going out looking for a tree so they can spool their winch up under tension this weekend.
This is exactly how I mounted my winch. Bitta extra work, but the only way.
Did you have any issues with lagging/bogging down after installing your airbox? My N70 runs really bad with my new airbox
So to tension the rope you literally just do exactly what was shown on the video? And the rope just feeds itself back in the drum that nicely? I read you need to move it side to side while tensioning it to get it to wrap on neatly so now I’m confused. 🤷♂️
If you do it straight on an incline ie going slightly uphill, the the rope will naturally roll properly side to side. You don't need to guide it.
@@AdeWhite awesome! Thank you!
Do you have any information on the installation of an air compressor and any maintenance of these additional tools such as the winch two way radio tyer deflator recovery kit and any thing else that I may have forgotten to mention thanks
a silly question, did you roll it back in using the remote? and put the car in neutral?
If my winch didn’t come with a breather can I install one on any winch?
Is that the same isolator the caught fire in sooty
Like the video Is it possible to install winch on rav4 2017?
So far my ultrawinch has gone through 2 solenoids a Bluetooth connectivity system and it now looks like the replacement control box I received to replace the ond that failed has the same issue just clicks won't go in or out
Now show me how you replace your head light bulb with that isolator switch where it is.
Cheers jocko
Jocko, mate, didnt see the beer fridge on the picture board. just sayin.
Where can I buy that red battery swithc? (in The Netherlands, Europe) Thanks
Jock really looks scottish doesnt he
So what is better connecting your winch straight to your main battery or your accessories battery? But great video as always!
Always to your main
Main. Want as much/constant power feed.
Yeah ok thanks guys, good to know
Depends on the battery and set up, mine is to the larger secondary battery. If you have a DC inverter charger system aka a Dc-Dc or isolator charger, then run to the main vehicle battery, if you have a high power split charge, run to either the starter or second battery, it doesn't matter.
You failed to rust proof the hole you drilled in the inner guard 5:18
🤓
@rhysnguyen5463 he's right and there's a reason everyone knows to do it.
No fuse on the short positive lead from the battery?
Why woould you? The cable has the cut off to protect it. A fuse would only blow when the whinch gets close to stall, that could be in the area of up to 600A depending on the winch. Not seen too many 12v 650A fuses around.
Not seen a US winch with a breather
Good onya mate
Jocko, if I did that I would end up with a winch that pumps air and 64 pieces left over.
I wish my wiring was this neat lol 4WD Supa center winch is not this nice
Great 👍😃
Good on ya mate ya make good videos
Battery isolator needs to be easily accessible, so not under the bonnet/hood (for you Americans). It would also be good for a emergency stop button on the bumper side, and a cut off internally both possible via a relay. Stop button needs to be accessible from immediately in front of the winch incase anyone gets trapped in there.
Doing this exact install now.
Video is incomplete. Standard switch supplied doesn't fit hilux switch panel without modification of the panel.
Not enough detail of where the control box and wiring/plugs, suggest likely because it was ugly in the end.
Otherwise a good vid.
tell shauno to call the farm truck the nauty40
Caught your acting debut in Cyber Bride. I hope you still do 4wd 24/7.😂
What an awful and obscure reference 😂
You didn’t prime your holes you drilled, they will rust in no time.
I bet the car has completed its full life before it’s a problem
Isolator's are just another fail point. You do not need them..
Why isn’t there any circut protection? Just wondering not trying to be a expert cause I’m far from it
Basically the Cut Off Isolator Switch is breaking the circuit.
"Potentially" there is only current to the switch, via the 300-400mm of insulated cable.
User activation of switch only supplies circuit current whilst in use, switched by user, then disabled by user.
Current draw whilst in use is too high for circuit protection.
Basically, it's a user beware situation, monitor whilst in use and utilise Isolator switch to eliminate any pending arising issues.
When winching finished, isolate circuit again at switch.
Good to see more winches coming out with breathers ……but it appears to only have one for the motor and not one for the gearbox ?
The motor side is where the heat is generated. Hot housing hits comparatively cold water, and that is where the failure can occur.
Not sure if I trust this guy i saw what happened to the other hilux, and that was just standard wiring
😂😂😂😂😂 i just shat my pants when i read this
Can someone explain why you need an isolator for the winch? What’s wrong with having constant power to it?
It's a kill switch for the winch.
If it fails for some reason in the in feed position, it could cause a catastrophic situation, maybe even when you are not around to witness. Like maybe a sticky solenoid doesn't fully disengage.
i personaly have never done a isolater with a winch install but i can understand where they may need it. it would great as an emergency stop or if there is a short somwhere, you can shut it off and save the car from going up in flames.
my last winch i did was faulty and got stuck in the retract position over night. it jammed up the rope, bent the fairlead tabs and drained the battery. got up the next day and had to take the other car to work🙄. sent it off and got another to replace it and all has been well. in saying that, had i used an isolater, i would never had known about the fault until i was stuck somwhere 😅 so im probably going to continue to do it that way. as long as my car starts, i know its good
You like to have your tongue hanging out of your mouth when you work 😂 like lot old school mechanics 👍
How come Jocko’s working on a Toyota?
Bc he owns it 🤷♀️
All of his vehicles are Toyota's.
haha. when isnt he?
"POSITIVE"
too good
What language is he speaking?
and you don't even show how u connect to run incab control ????pointless video
First comment