If only all RUclips videos were like this. No fluff, no flair, organized presentation, appropriately touched on every relevant topic, and provided additional resources and references.
I watched at least a dozen videos dancing around this topic before watching yours. Very simple, very clear. You have a great way of explaining things. Thank you!
hey ,if anyone else trying to find out aquaponics book try Aqua Recovery Tactics (aqua.RecoveryTactics.com ) ? Ive heard some pretty good things about it and my colleague got amazing results with it.
I am voting with the person below. After watching about 50 videos you are absolutely the best at no Blabalblablablablablabla before saying a few useful things. Your video was clear, got right to the point, full of great information. Keep up this great work.
THANK YOU SO MUCH! Im a beginner. Was truly spending time SEARCHING for anyone offering reliable information on exactly what you covered! Your explanations are easy for me to understand and I am very grateful!
As I start my journey into hydroponics I am cursing my high school guidance counselor for discouraging me to register for chemistry & physics. Fortunately I stumbled into a career that has been fruitful but I felt that I was missing something my whole life because I did not have the proper education in these areas. I couldn't tell you the purpose of nitrogen, phosphorous or potassium until I watched your video.... thank you for the education!!
9:17 Actually if you combine an acid and a base they will create something called a buffer solution which will make changing the pH n either direction a lot more difficult. Especially if you use the corresponding base to the acid.
A beginners guide geared to commercial grow,,,it really doesnt matter what brand nutes you use learn the basics to feeding first,,,to be succesful in hydroponics you must first learn to feed properly,,ph is one of the most important things you need to manage,,a crop production guide or nutrient calander probly wont fit your grow,,to many variables,,it matters definately how much nutes you have,,when ph ing,,the most important thing is your ph swing,,this is directly affected by nutrient values,,use your tds meter an ph pen,,12 hours after feeding check your ph,,if it raises you didnt feed enough,,if it falls you fed to much,,learn this its BY FAR THE MOST IMPORTANT INFORMATION HYDRO BEGINNERS CAN GET
Hi ZipGrow. I'm really surprised to see you still at it. Had heard you sold up and moved on for big bucks. You earned the right to big bucks but glad to see you're still putting out content since you're perhaps the biggest contributor to this kind of hydroponic information necessary to successfully make it work. So nice one brother. Hope the lockdown hasn't adversely effected you all. Hope to see more of your videos sir. Kind regards from Ireland.
The majority of technical videos on hydroponics are poorly put together, full or errors, and missing critical information. Your video is thought out and each topic is explained in great detail. Excellent production. Look forward to other videos from you.
Great video ! Thank you ! I have a question How important do you think is the origin of those Elements (1,2,3), can they be harmful for the consumer if acquired from the wrong source? What are the guidelines to access those elements. One more question, in your opinion how important/different it is to grow vertical farming in pvc tubes or tube that are made from natural material i.e. wooden ? Great job Thank you
Can I mix a measured portion of ammonium nitrate with tomato formula to make a veggie mix for peas, and could i create a dry mix of the two or would it be uneven? i've heard some companies have processes to make the different ingredients uniform
Thank you so much for this. Anyone can tell me how, but thank you for telling me why! I am on my second grow and followed a guide strictly. Now for my second I truly want to know why we use these nutrients and how to begin to identify when one is needed. Thank you again!!!
When you explained about mixing the dry fertilisers you said that part A should be mixed in 5 gallons of water and so also part B but you did not clarify whether part C should also be mixed in an additional quantity of 5 gallons or it is to be mixed in the same quantity of water as part A. So do we land up with a total of 10 litres or 15 litres.
Great video to learn and understand hydrophobic nutrition. I wanted to know if your PH is too high, how can you bring it down if you advise to stay with one of either PH up or PH down?
It's not that you can't use both pH up and pH down in your system just that the two work against each other and if your pH is behaving erratically its generally a sign that something else needs attention. Under properly balanced conditions your system should trend in only one direction. When you use both together they increase the buffering capacity of your water such that you will need more and more in order to change the pH, and it quickly gets into a vicious cycle. It might be easier to reset your reservoir with fresh water and monitor the pH closely from the start.
Oke! a very clear video. However I use my pond as a waterreservoir. The pond contains fish. Does somebody know the effects of adding fertilizers to the pond and the effect on fish?
It sounds like you are doing aquaponics. You may find this video on introduction to nutrients in aquaponics useful: ruclips.net/video/Lgtue6tbbhc/видео.html&ab_channel=ZipGrow OR the full playlist here ruclips.net/p/PLAPahqrfGZZmUNzrQV0ZwKjUrmqq-Stqh
Aarumamaadu, according to him in other video, iron edta is not recommended, much better is EDDHA or even DTPA. but i just started learning about and every tips count for me, i m from brazil
Hello! Good videos! I have a question. Why my calcium participate when im mixing the reservoir? I know when air bubbleing takes out co2 from water so it raise ph, but every hydroponics need some kind of airstone in the reservoir, doesnt matter its a dwc or nft system. So my question is what the best practice when mixing nutrients? I wait 1 day with tap water to get stagnated, and i air bubbled it too. Than ph go up 8.0 . Than i add a bit of nitric acid 60%, to get ph down to 6.5. Than i add a solution A (npk 6,14,30+epsom salt) stock solution, than waiting for another day and bubbleing it. Than next day i add the calcium nitrate stock solution B, than add more nitric acid to make ph 6.0. Than suddenly ph starts to rise again and calcium participate, and make cloudy water. The water was on room temperature all the time, ec went up after mixing all nutes to 900ppm (what is good), so dont know what im doing wrong pls help. How to avoid this participated clody water. Thanks.
I purchased a A & B nutrient solution. The company suggests after mixing part A to water is to leave it sit from 4-5 hours before adding part B. No reason given. Is this necessary?
Whay do you do if you EC is high and your PH is fine? Do you jist let the plants absorb the nutrients that are in there and let the levels drop naturally?
Question: the nutrient concentrations are set for optimal (fastest?) plant development, meaning they may be higher than the plant would naturally be able to filter out (via osmotic pressure?), meaning those elements and minerals may be "pumped" at high concentrations into the plant and transferred into the consumer. For example lettuce, you eat 70% of the plant, so you get probably a overdose of those minerals if consumed on a daily basis? Is there a practice of measuring the dry mineral content from the same amount of plant matter from natural source and from hydroponic products? I guess that's the "trust the producer" stuff but do I trust them to not make their stuff too concentrated ?!
Really nice video 😊, thank you very much, can you please make one that covers the routine and best practices needed for hydroponic growers to follow, no video covers that, they present equipment fertilizers or explain concept, but no daily process verification and steps to follow
Thanks for the suggestion. We are adding more content every few weeks so please subscribe to our channel and we will keep your requests in mind. You can also look for content that may help on our blog zipgrow.com/zipblog/
so... if I just pour water from my aquarium water change into that bucked can it also feed the plants the same way as it did in this video with your nutrients?
It helps with plants as I've always used my fish tank water for my house plants in soil. But depending on how many fish you have the amount of nutrients from their waste is often too low or iffy to grow plants hydroponically. I've only just started experimenting with hydroponics but had been dabbling in aquaponics. My in home fish tank water did not even come close to have enough nutrients. And fish waste has to kinda go though a process where it changes the waste. The fish water went into a tank with bio balls in it then it went into the plants then cycled back into the fish tank. I'm sure someone here could explain it better than I do but the bio balls change the fish waste into a more absorbable nutrient.
Absolutely excellent video. Really informative. I live in Thailand where instructions on fertilezers etc are in Thai. We can however buy A and B dry mixes etc. Many thanks for this!
Am I right in thinking if you add Part A and Part C together you need 10 gallons ofwater (5+5) and only 5 gal.water for Part b ? (for a total of 15 Gal. later when all are mixed together?)
that you describe part A , part b and Part C solution. where can i get theses all three categorized dry solutions . did i ll get with alphabetical names or chemical names wise. please reply thanks. nice video
If I mix my three food solutions following the label dosing level on a new tank of hydro water - then do I still need to check ec -or the hydro water should be put me at least initially within the correct pH range?
I want to grow lettuce in my hydroponic,can I use common fertilizer for it?,if yes how can I mix it in to right ratios and do you think the crop will grow well using the common fertilizer?and What crop can you advice for this?
Good question Ricardo. Yes. Hydroponics nutrient formulas take into account the fact that you're starting with reverse osmosis water and therefore provide a balanced mix of micro- and macro-nutrients. The same holds true for aeroponics. Most soil fertilizer focuses on amending or supplementing what is already present in the soil and therefore doesn't include micronutrients.
If I dissolve part B (Calc. Nitrate) first in warm/hot water until it's fully dissloved, could I then add the required amounts of part A and Mag. Sulfate in the same water to come to a concentrated mix of all the required nutrients, and then use that concentrate to mix with water to arrive at the desired PPM in the final solution.
+chandra0102 Nope, better mix and store them separately, especially if you're storing a concentrate. A bit of a pain but worth it to avoid precipitates!
You shouldnt need hot water for calcium nitrate, you can dissolve upto 1.2kg in 1 litre of 20 deg C water. If its hard to dissolve it may be a field grade calcium nitrate (typically granular) rather than a greenhouse grade (typically prilled). The latter will dissolve almost instantly in cold water.
Hello! Often with smaller hydroponic systems we recommend replacing the solution every 1-2 months because you will build up a higher ratio of Calcium and Magnesium that will artificially inflate your EC values. This is also a great opportunity to clean your reservoir and flush your lines. Thanks for watching!
hi i need to ask you a question but first great video put everything plain and simple and my question is about something you said on the video about automatic fertilization what kind of machine or gadget do you recommend for cherry tomatoes on a hydroponic greenhouse second question what height do you recommend for a greenhouse if i am planting undetermined tomatoes on the tropic at sea level ? my greenhouse will be 6' walls 18' at the center of the greenhouse 24' wide by 120' long -
would you please explain in another video how to prepare the hydroponics solution from principal chemicals , since some chemicals available in some markets or countries are not available in other countries, also brand names may change from a country to another. Thanks.
Does this mean that if you have a small scall hydroponics system for between 10 and 15 plants - you shouldn't mix them up because they require different amounts?
Please advise what will happen if we make only one part solution? Will the precipitates seriously affect the nutrients? If we physically remove such salts can we use the nutrient solution?
Precipitates will definitely affect the nutrient ratios. You could strain out the precipitate salts, but it would be a huge pain to get them out and your nutrient ratio will not be right. While it may not be a big deal in terms of the plants doing well, it does mean that you don't know exactly what you're giving to your plants. And in the case that it does cause a deficiency in your plants it will take some research to correct. What salt precipitated out? How much came out? Now what and how much needs to be added? Alternatively, you could buy a one part formula that has everything needed and won't precipitate put of solution.
After adding nutrients in first phase how to determine the remaining nutrients level ? On basics of that we should mix next batch nutrients right ? We can measure of EC , But how to determine the each nutrients % in the remaining water. Please help.
Dennis Totman any condition your plant may be in either from receiving too many or too little nutrients should be simple to pinpoint to which nutrient your plant is needs more/less of
Dennis Totman every plant is gonna need the same nutrients really, some plants respond better to more, some respond better to less You gotta see how your plants react to the nutrients but start by using 1/4-1/2 of the manufacturers recommended settings
Txs so much for d useful tips. Regarding yr pt4- can I switch my masterblend fm one to another supplier coz i don't get hold of old supplier now. The nutrients content is slightly different. I'm worried my existing crop not able to adapt to new masterblend (dry version). I will continue to add calcium nitrate n Epsom salt too. Hope u cld give me some advise. Thanks so much. Rgds, Annie fm Singapore.
If we are added all the solution one time and planted ,after that what we wnt to do?how we can manage the concentration of the nutrients? Hoping for tge reaply😉
When you use tap water, there are already chlorine and other minerals in them. How does electrical conductivity work in measuring fertiliser concentration vs chlorine or other mineral concentration
Hello Sandeep, this is definitely something to consider. Ideally you would like to use water with the lowest EC possible as a starting point (RO, Distilled, even rainwater) But if using tapwater it is important to measure incoming water EC and add that to your EC setpoint to account for that "artificial" EC
First hydroponics nutrient video I have watched. Thank you. Very informative video. Every other video I watch will be judged against this. I doubt I'll find better.
Why is the type "C" stuff not sold already incorporated in the type "A", If both dissolve why keep them separate? (Or do you need to vary the relative concentrations a lot by plant type?)
Hi Peter. Most growers tend to work with a tank “A” and “B” stock solution. The most important takeaway from creating your own hydroponic nutrient solution is to keep calcium nitrate and magnesium sulfate separate. If calcium nitrate and magnesium sulfate react at high enough concentrations, calcium sulfate will form. This precipitate (solid) will get into your pumps and irrigation lines. It's almost impossible to clean out of the system and some lines/parts might need to be replaced depending on the damage. Some growers will use a tank “C” depending on their crop/nutrient mix, but it’s more of a personal preference. Just make sure you are dosing your tanks at low enough concentration to prevent precipitates from forming.
Hello , first of all - big thanks for doing this.. you really really helpful. Could you please help me resolve my few doubts.. If I'm growing tomatoes in cocopeat medium, should i be circulating nutrient solution every day three times ? Wouldn't over fertilize and wilt? Or should i be feeding nutrient solution once or twice a week and feed rest of the time water?? I'm doing soilless tomato growing in cocopeat and im afraid of over fertilizing ? Pls help since its hydroponics method nutrient water feeding 3 times a day makes sense but will it cause over fertilizing? Many thanks in advance..
I have a 2 part system where I can run the hydroponic unit separate from the aquaculture unit. Can I mix used hydro water with water to the aquaculture, and if so what EC would be the maximum the fish can handle?
What are your suggestions for water? Obviously distilled or RO water that are really close to pure are optimal, but what level of water quality is needed? I ask this, because I'm getting setup to grow some strawberries and some other produce inside, but plan to run something much larger outside in the summers. Is there anything specifics I should worry about in City water? I haven't tested my water yet.
Rubbish, simply use nitric acid PH down to convert the calcium carbonate in the source water into calcium nitrate. Reduce the quantity of chemical calcium nitrate to rebalance the total N and Ca in the working solution. The reason your Part B (calcium nitrate) is kept seperate is not because its not very soluble, (1.2kg will dissolve in a litre of water), its because in concentrated solutions it will react with sulphates and phosphates to form insoluble precipitates that are then unavailable to the plants. If you mix concentrated calcium nitrate and magnesium sulphate (epsom) solutions you`ll see it in action ;)
i don't know what carbonates are, but i stuck my TDS meter in some of my tap water and the reading was 150 - 160 ppm. do you think that's okay? i really don't want to have to buy distilled water. thanks! this is just for personal use in a miracle grow aerogarden and i'm not looking for absolute perfection. i want the plants to grow well and flower well and fruit well, but i'm not trying to feed a whole city.
Is it possible to test the ec of your runoff to tell when you should add fertilizers? At the start of my grow I didnt have a ph or ec meter, I do now and have flushed and balanced the ph and ec of the plants and the water/ferts. I dont want to start overadding anything again and the rule of thumb ive heard is once a week with ferts and just water the rest. However i am using coco so im doing calmag and azos with the water
thanks!a lot for the information.it is really helpful and covers almost every aspect of hydroponic nutrients specially for the beginners like me.one question though,how we top new nutrient solution to the old tank full of old nutrient solution?i mean,if i have already a nutrient tank half full of previous nutrient,should i just pour new nutrient solution in it to top it up or should i empty it up and then fill it with new nutrient solution?
+nircik singh, you can top off your solution either way but we recommend using an EC meter to mix nutrient to the right level. Of course, the balance of your solution can change over time as plants take up more of one nutrient than another, so you'll probably have to reset the system every couple months. Cleaning it out a couple times a year is good for sanitation as well, so you can do both at once.
If i'm doing a more aerated spray in my hydroponic system, would the nutrient solution reach the plants if the nozzles has water droplets at 7 microns?
You need a droplet range of 5-80 microns. Dont use 10-24 brass patio misting nozzles they will clog within days. Run drain to waste using the correct nozzles and you wont have any clogging issues. You wont need to constantly check and adjust the PH/EC or ultimately dump the reservoir because the run-off doesnt return to alter the chemical makeup.
Great video! I'm trying to grow a citrus plant (oranges), which nutrients ratio should I start? Would it be okay if i start with a higher N ratio, and then switch to a higher PK after its has a significant leafs growth?
Question... i have changed the nutrients in the reservoir, after 8 hours the roots got stained brown i dont this its root rot can be?. should i do something about??? ph 5.8 ppm 800, basil krakty method 1 gallon reservoir. I left the same gap between the roots and level of water it had before water change.
You talk about 16 plant nutrients, but our bodies need 90 nutrients, and 60 of them are minerals. I add liquid seaweed to my mix hoping to get them and I also throw some green sand into my reservoir in the hope that the mycorrhizae will release them for the plants and for us. City water in San Francisco is about pH 9.5. By the time I add the nutrients it is down to about 6.5. I use pH down or ascorbic acid or distilled vinegar to take it to 6. I got a cheap pH meter from Amazon and it seems to work. I have the Bluelab EC meter but I would suggest trying the cheap ones. I use a bloom mix for the flowers in my yard and I set that at pH 4.5 to hopefully compensate for the high pH of the city water I put on them.
tangobayus Azomite rock dust has 67 micro nutrients worm castings also great over looked organic medium that Full of All kinds of Good Stuff ! Use at 20% to 25% volume w/coco/peat ,perlite & Happy frog or equivalent
I can actually answer this, I happen to have a bottle of normal liquid fertilizer I have been using (need to upgrade to hydroponic fertalizer now) right next to me. It contains 87% water 7% Nitrogen, 1.3% Phosphorous, and 5% Potasium, and trace minerals adding up to less than 0.05% none of which are the ones mentioned in the video (almost half of which is Iron).
Hi, I started hydroponic system using NFT technique(water stagnated), I started growing micro greens, marigold, chillies, bell pepper, spinach, fenugreek in pvc pipes... I noticed the plants didn't grew as expected, few plants died, few plants leaves got dried, few plants leafs turned into light yellow...could you please suggest best methods for better growth of plants and supplements requirement....
hi, how to produce hydroponic fertilizer for home growing. can i use asimple program like as maxigro for all of plants? from where i can find hydroponic formula
Really like the video and all the contents but have a lot of interest in doing a garden outside in soil and we'll have multiple plants my ground is alkali and was curious how to bring it up to a common neutral have a few layers of topsoil and Clay mixture don't have a lot of money to spend on nutrients and not too for sure how to mix it
If only all RUclips videos were like this. No fluff, no flair, organized presentation, appropriately touched on every relevant topic, and provided additional resources and references.
I watched at least a dozen videos dancing around this topic before watching yours. Very simple, very clear. You have a great way of explaining things. Thank you!
Glad we could help, Sla Cra.
I can across your video on Fast Track Grower - there are many useful videos there that should help you
I watched this video at least a dozen times
hey ,if anyone else trying to find out aquaponics book try Aqua Recovery Tactics (aqua.RecoveryTactics.com ) ? Ive heard some pretty good things about it and my colleague got amazing results with it.
I am voting with the person below. After watching about 50 videos you are absolutely the best at no Blabalblablablablablabla before saying a few useful things. Your video was clear, got right to the point, full of great information. Keep up this great work.
This is a really informative video for budding Hydroponic farmers! Simple, Brief and to the point! Thank you for putting up such content!
THANK YOU SO MUCH! Im a beginner. Was truly spending time SEARCHING for anyone offering reliable information on exactly what you covered! Your explanations are easy for me to understand and I am very grateful!
Glad it was helpful! We have more free resource on our website if you are interested zipgrow.com/grow-guides/
How can i find the specific formulas for specific crops and can you please give more detail about micro solutions? Thanks.
As I start my journey into hydroponics I am cursing my high school guidance counselor for discouraging me to register for chemistry & physics. Fortunately I stumbled into a career that has been fruitful but I felt that I was missing something my whole life because I did not have the proper education in these areas. I couldn't tell you the purpose of nitrogen, phosphorous or potassium until I watched your video.... thank you for the education!!
9:17 Actually if you combine an acid and a base they will create something called a buffer solution which will make changing the pH n either direction a lot more difficult. Especially if you use the corresponding base to the acid.
A beginners guide geared to commercial grow,,,it really doesnt matter what brand nutes you use learn the basics to feeding first,,,to be succesful in hydroponics you must first learn to feed properly,,ph is one of the most important things you need to manage,,a crop production guide or nutrient calander probly wont fit your grow,,to many variables,,it matters definately how much nutes you have,,when ph ing,,the most important thing is your ph swing,,this is directly affected by nutrient values,,use your tds meter an ph pen,,12 hours after feeding check your ph,,if it raises you didnt feed enough,,if it falls you fed to much,,learn this its BY FAR THE MOST IMPORTANT INFORMATION HYDRO BEGINNERS CAN GET
Hi ZipGrow. I'm really surprised to see you still at it. Had heard you sold up and moved on for big bucks. You earned the right to big bucks but glad to see you're still putting out content since you're perhaps the biggest contributor to this kind of hydroponic information necessary to successfully make it work. So nice one brother. Hope the lockdown hasn't adversely effected you all. Hope to see more of your videos sir. Kind regards from Ireland.
Excellent breakdown on nutrient solutions and understanding what your meter readings are saying.
Hi, I am bigger in this field and trying to use my 2400 ft plot for hydroponic set up. i was going through your vedio was reallly useful. thank you,
The majority of technical videos on hydroponics are poorly put together, full or errors, and missing critical information. Your video is thought out and each topic is explained in great detail. Excellent production. Look forward to other videos from you.
Great video ! Thank you !
I have a question
How important do you think is the origin of those Elements (1,2,3), can they be harmful for the consumer if acquired from the wrong source? What are the guidelines to access those elements.
One more question, in your opinion how important/different it is to grow vertical farming in pvc tubes or tube that are made from natural material i.e. wooden ?
Great job
Thank you
Can I mix a measured portion of ammonium nitrate with tomato formula to make a veggie mix for peas, and could i create a dry mix of the two or would it be uneven? i've heard some companies have processes to make the different ingredients uniform
For mixing we would suggest you contact the manufacturer of the nutrients for those questions.
Thank you so much for this. Anyone can tell me how, but thank you for telling me why! I am on my second grow and followed a guide strictly. Now for my second I truly want to know why we use these nutrients and how to begin to identify when one is needed. Thank you again!!!
When you explained about mixing the dry fertilisers you said that part A should be mixed in 5 gallons of water and so also part B but you did not clarify whether part C should also be mixed in an additional quantity of 5 gallons or it is to be mixed in the same quantity of water as part A. So do we land up with a total of 10 litres or 15 litres.
Great video to learn and understand hydrophobic nutrition. I wanted to know if your PH is too high, how can you bring it down if you advise to stay with one of either PH up or PH down?
It's not that you can't use both pH up and pH down in your system just that the two work against each other and if your pH is behaving erratically its generally a sign that something else needs attention. Under properly balanced conditions your system should trend in only one direction.
When you use both together they increase the buffering capacity of your water such that you will need more and more in order to change the pH, and it quickly gets into a vicious cycle. It might be easier to reset your reservoir with fresh water and monitor the pH closely from the start.
This gave me so much clarity about hydroponic nutrients! Thank you!!
Curious is the same fertilizers made for hydroponics the same ones people would be using for aeroponic systems ?
Do you still add magnesium if your npk already contains magnesium?
FINALLY someone who can explain this topic who isn't stoned or simply parroting what all the other youtubers said in their sponsored videos.
I want to grow mint hydroponically.What should be my nutrient mixing ratio?
please do reply
What was the name of company that supplies strawberry mix, please?
Fantastic explanation
And recap at the end is like a professional instructor 👍👍👌
Glad you liked it! Thank you😀🌱
Oke! a very clear video. However I use my pond as a waterreservoir. The pond contains fish. Does somebody know the effects of adding fertilizers to the pond and the effect on fish?
It sounds like you are doing aquaponics. You may find this video on introduction to nutrients in aquaponics useful: ruclips.net/video/Lgtue6tbbhc/видео.html&ab_channel=ZipGrow OR the full playlist here ruclips.net/p/PLAPahqrfGZZmUNzrQV0ZwKjUrmqq-Stqh
Very informative and well-done from the way the information was laid out to your speaking speed. Thank you.
Hello
Can we use sewed water for Hydrophonic without use any firtilizer
Sewed water?
So how should we mix them to get a small plant to flower?
I just want to know what nutrients go with what plant. Home gardening Kratky Method. Help!!!
Great vid!!!! The best I've found so far!!! Thanks a lot for sharing!!! 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Glad you enjoyed it Jose!
*For 100 litter water*
Magnesium Sulfate - 50 grams
Potassium Nitrate - 50 grams
Monoammonium Phosphate - 18 grams
Calcium Nitrate - 70 grams
Manganese Chelate - 0.667 Gram
Boron Chelate - 0.35 Gram
Zinc Chelate - 0.25 Gram
Sodium Molybdate - 0.013 Gram
Copper Chelate - 0.143 Gram
Iron EDTA Fe(EDTA) 2.24 grams
Earumamaadu 👍 Source?🤔🤔🤔
Aarumamaadu, according to him in other video, iron edta is not recommended, much better is EDDHA or even DTPA. but i just started learning about and every tips count for me, i m from
brazil
Hello! Good videos! I have a question. Why my calcium participate when im mixing the reservoir? I know when air bubbleing takes out co2 from water so it raise ph, but every hydroponics need some kind of airstone in the reservoir, doesnt matter its a dwc or nft system. So my question is what the best practice when mixing nutrients? I wait 1 day with tap water to get stagnated, and i air bubbled it too. Than ph go up 8.0 . Than i add a bit of nitric acid 60%, to get ph down to 6.5. Than i add a solution A (npk 6,14,30+epsom salt) stock solution, than waiting for another day and bubbleing it. Than next day i add the calcium nitrate stock solution B, than add more nitric acid to make ph 6.0. Than suddenly ph starts to rise again and calcium participate, and make cloudy water. The water was on room temperature all the time, ec went up after mixing all nutes to 900ppm (what is good), so dont know what im doing wrong pls help. How to avoid this participated clody water. Thanks.
I purchased a A & B nutrient solution. The company suggests after mixing part A to water is to leave it sit from 4-5 hours before adding part B. No reason given. Is this necessary?
Whay do you do if you EC is high and your PH is fine? Do you jist let the plants absorb the nutrients that are in there and let the levels drop naturally?
Question: the nutrient concentrations are set for optimal (fastest?) plant development, meaning they may be higher than the plant would naturally be able to filter out (via osmotic pressure?), meaning those elements and minerals may be "pumped" at high concentrations into the plant and transferred into the consumer. For example lettuce, you eat 70% of the plant, so you get probably a overdose of those minerals if consumed on a daily basis? Is there a practice of measuring the dry mineral content from the same amount of plant matter from natural source and from hydroponic products? I guess that's the "trust the producer" stuff but do I trust them to not make their stuff too concentrated ?!
It is fascinating how complex this is, yet in nature… plants just grow.
Really nice video 😊, thank you very much, can you please make one that covers the routine and best practices needed for hydroponic growers to follow, no video covers that, they present equipment fertilizers or explain concept, but no daily process verification and steps to follow
Thanks for the suggestion. We are adding more content every few weeks so please subscribe to our channel and we will keep your requests in mind. You can also look for content that may help on our blog zipgrow.com/zipblog/
Great video can I ask were is the best place to buy dry nutrients?
Pls can i use agric lime as a source of calcium solution
so... if I just pour water from my aquarium water change into that bucked can it also feed the plants the same way as it did in this video with your nutrients?
Sofia Cortes I’d like to know that too....
It helps with plants as I've always used my fish tank water for my house plants in soil.
But depending on how many fish you have the amount of nutrients from their waste is often too low or iffy to grow plants hydroponically.
I've only just started experimenting with hydroponics but had been dabbling in aquaponics. My in home fish tank water did not even come close to have enough nutrients.
And fish waste has to kinda go though a process where it changes the waste.
The fish water went into a tank with bio balls in it then it went into the plants then cycled back into the fish tank.
I'm sure someone here could explain it better than I do but the bio balls change the fish waste into a more absorbable nutrient.
For the PH up and down is there organic and none toxic versions available? I'm trying to be all organic and none toxic chemicals
Absolutely excellent video. Really informative. I live in Thailand where instructions on fertilezers etc are in Thai. We can however buy A and B dry mixes etc. Many thanks for this!
Am I right in thinking if you add Part A and Part C together you need 10 gallons ofwater (5+5) and only 5 gal.water for Part b ? (for a total of 15 Gal. later when all are mixed together?)
that you describe part A , part b and Part C solution. where can i get theses all three categorized dry solutions . did i ll get with alphabetical names or chemical names wise. please reply thanks. nice video
What's the correct cm water for indoor hydroponic, water temperature? how long does it needs to be feed underwater and draining and repumped?
If I mix my three food solutions following the label dosing level on a new tank of hydro water - then do I still need to check ec -or the hydro water should be put me at least initially within the correct pH range?
How long do you wait to add the food for the plants
If you use soil instead of perlite, do you still need all these additives?
Perhaps they are only for water....
Bernhard you still need to water your soil with ph’d, nutrient enriched water
I want to grow lettuce in my hydroponic,can I use common fertilizer for it?,if yes how can I mix it in to right ratios and do you think the crop will grow well using the common fertilizer?and What crop can you advice for this?
are they the same to aeroponics?
Good question Ricardo. Yes. Hydroponics nutrient formulas take into account the fact that you're starting with reverse osmosis water and therefore provide a balanced mix of micro- and macro-nutrients. The same holds true for aeroponics. Most soil fertilizer focuses on amending or supplementing what is already present in the soil and therefore doesn't include micronutrients.
If I dissolve part B (Calc. Nitrate) first in warm/hot water until it's fully dissloved, could I then add the required amounts of part A and Mag. Sulfate in the same water to come to a concentrated mix of all the required nutrients, and then use that concentrate to mix with water to arrive at the desired PPM in the final solution.
+chandra0102 Nope, better mix and store them separately, especially if you're storing a concentrate. A bit of a pain but worth it to avoid precipitates!
Thanks for your reply, greatly appreciate it.
You shouldnt need hot water for calcium nitrate, you can dissolve upto 1.2kg in 1 litre of 20 deg C water. If its hard to dissolve it may be a field grade calcium nitrate (typically granular) rather than a greenhouse grade (typically prilled). The latter will dissolve almost instantly in cold water.
Great vido,thanks. About a nutrient mix in a nft system ... how many times is to be used before throwing it away?
Hello! Often with smaller hydroponic systems we recommend replacing the solution every 1-2 months because you will build up a higher ratio of Calcium and Magnesium that will artificially inflate your EC values. This is also a great opportunity to clean your reservoir and flush your lines.
Thanks for watching!
where to find the crop production list?
hi i need to ask you a question but first great video put everything plain and simple and my question is about something you said on the video about automatic fertilization what kind of machine or gadget do you recommend for cherry tomatoes on a hydroponic greenhouse second question what height do you recommend for a greenhouse if i am planting undetermined tomatoes on the tropic at sea level ? my greenhouse will be 6' walls 18' at the center of the greenhouse 24' wide by 120' long -
would you please explain in another video how to prepare the hydroponics solution from principal chemicals , since some chemicals available in some markets or countries are not available in other countries, also brand names may change from a country to another. Thanks.
Where can I get the crop production guide from
Does this mean that if you have a small scall hydroponics system for between 10 and 15 plants - you shouldn't mix them up because they require different amounts?
Please advise what will happen if we make only one part solution?
Will the precipitates seriously affect the nutrients?
If we physically remove such salts can we use the nutrient solution?
Precipitates will definitely affect the nutrient ratios. You could strain out the precipitate salts, but it would be a huge pain to get them out and your nutrient ratio will not be right. While it may not be a big deal in terms of the plants doing well, it does mean that you don't know exactly what you're giving to your plants. And in the case that it does cause a deficiency in your plants it will take some research to correct. What salt precipitated out? How much came out? Now what and how much needs to be added?
Alternatively, you could buy a one part formula that has everything needed and won't precipitate put of solution.
After adding nutrients in first phase how to determine the remaining nutrients level ? On basics of that we should mix next batch nutrients right ? We can measure of EC , But how to determine the each nutrients % in the remaining water. Please help.
Akash, the easiest way if you know the EC is to just top off with water or add nutrients until you reach the correct EC range.
Can you please send me the link to the "Recomended Crop List" that you talk about to figure out what nutriont mix is best for each crop?
Different plants have different nutrient needs at different times, do you have a book or chart that shows the differing needs for each specific plant?
Dennis Totman any condition your plant may be in either from receiving too many or too little nutrients should be simple to pinpoint to which nutrient your plant is needs more/less of
Dennis Totman every plant is gonna need the same nutrients really, some plants respond better to more, some respond better to less
You gotta see how your plants react to the nutrients but start by using 1/4-1/2 of the manufacturers recommended settings
Like the video, very useful. But using all these products, are your plants still organic ?
Maxime Biver I am wondering this as well.....
Maxime Biver no
So why does the pH fluctuate? And is it predictable and how?
Really happy to come across your channel! Lots of information for beginners! Just amazing!
Txs so much for d useful tips. Regarding yr pt4- can I switch my masterblend fm one to another supplier coz i don't get hold of old supplier now. The nutrients content is slightly different. I'm worried my existing crop not able to adapt to new masterblend (dry version). I will continue to add calcium nitrate n Epsom salt too. Hope u cld give me some advise. Thanks so much. Rgds, Annie fm Singapore.
This is so incredible...innovative minds matters these days
Thanks you have make it very simple for me to understand. Well done
wong stanley hobby
If we are added all the solution one time and planted ,after that what we wnt to do?how we can manage the concentration of the nutrients?
Hoping for tge reaply😉
When you use tap water, there are already chlorine and other minerals in them. How does electrical conductivity work in measuring fertiliser concentration vs chlorine or other mineral concentration
Hello Sandeep, this is definitely something to consider. Ideally you would like to use water with the lowest EC possible as a starting point (RO, Distilled, even rainwater) But if using tapwater it is important to measure incoming water EC and add that to your EC setpoint to account for that "artificial" EC
First hydroponics nutrient video I have watched. Thank you. Very informative video. Every other video I watch will be judged against this. I doubt I'll find better.
Why is the type "C" stuff not sold already incorporated in the type "A", If both dissolve why keep them separate? (Or do you need to vary the relative concentrations a lot by plant type?)
Hi Peter. Most growers tend to work with a tank “A” and “B” stock solution. The most important takeaway from creating your own hydroponic nutrient solution is to keep calcium nitrate and magnesium sulfate separate. If calcium nitrate and magnesium sulfate react at high enough concentrations, calcium sulfate will form.
This precipitate (solid) will get into your pumps and irrigation lines. It's almost impossible to clean out of the system and some lines/parts might need to be replaced depending on the damage.
Some growers will use a tank “C” depending on their crop/nutrient mix, but it’s more of a personal preference. Just make sure you are dosing your tanks at low enough concentration to prevent precipitates from forming.
Hello , first of all - big thanks for doing this.. you really really helpful.
Could you please help me resolve my few doubts..
If I'm growing tomatoes in cocopeat medium, should i be circulating nutrient solution every day three times ? Wouldn't over fertilize and wilt?
Or should i be feeding nutrient solution once or twice a week and feed rest of the time water??
I'm doing soilless tomato growing in cocopeat and im afraid of over fertilizing ? Pls help since its hydroponics method nutrient water feeding 3 times a day makes sense but will it cause over fertilizing?
Many thanks in advance..
I have a 2 part system where I can run the hydroponic unit separate from the aquaculture unit. Can I mix used hydro water with water to the aquaculture, and if so what EC would be the maximum the fish can handle?
very nicely done! Just starting don't have a clue. Now I'm a little smarter. Thanks
But d***, this is so incredibly informative. It felt like I was in a collegiate class. Very nice video. New subscriber here! 😃
What are your suggestions for water? Obviously distilled or RO water that are really close to pure are optimal, but what level of water quality is needed? I ask this, because I'm getting setup to grow some strawberries and some other produce inside, but plan to run something much larger outside in the summers. Is there anything specifics I should worry about in City water? I haven't tested my water yet.
The most common problem people run into with source water is carbonates. If they're at 250 ppm or up, you should use an RO filter.
Rubbish, simply use nitric acid PH down to convert the calcium carbonate in the source water into calcium nitrate.
Reduce the quantity of chemical calcium nitrate to rebalance the total N and Ca in the working solution.
The reason your Part B (calcium nitrate) is kept seperate is not because its not very soluble, (1.2kg will dissolve in a litre of water), its because in concentrated solutions it will react with sulphates and phosphates to form insoluble precipitates that are then unavailable to the plants. If you mix concentrated calcium nitrate and magnesium sulphate (epsom) solutions you`ll see it in action ;)
i don't know what carbonates are, but i stuck my TDS meter in some of my tap water and the reading was 150 - 160 ppm. do you think that's okay? i really don't want to have to buy distilled water. thanks! this is just for personal use in a miracle grow aerogarden and i'm not looking for absolute perfection. i want the plants to grow well and flower well and fruit well, but i'm not trying to feed a whole city.
Ok
Is it possible to test the ec of your runoff to tell when you should add fertilizers? At the start of my grow I didnt have a ph or ec meter, I do now and have flushed and balanced the ph and ec of the plants and the water/ferts. I dont want to start overadding anything again and the rule of thumb ive heard is once a week with ferts and just water the rest. However i am using coco so im doing calmag and azos with the water
How much of 20-10-20 to use in a gallon of water?
thanks!a lot for the information.it is really helpful and covers almost every aspect of hydroponic nutrients specially for the beginners like me.one question though,how we top new nutrient solution to the old tank full of old nutrient solution?i mean,if i have already a nutrient tank half full of previous nutrient,should i just pour new nutrient solution in it to top it up or should i empty it up and then fill it with new nutrient solution?
+nircik singh, you can top off your solution either way but we recommend using an EC meter to mix nutrient to the right level. Of course, the balance of your solution can change over time as plants take up more of one nutrient than another, so you'll probably have to reset the system every couple months. Cleaning it out a couple times a year is good for sanitation as well, so you can do both at once.
Bright Agrotech
thanks for the reply:)
I don't have Magnesium Sulfate what is the alternative for that nutrient? thank you!
Do you have access to Epson Salt.
Wow so detailed and yet easy to understand ! Kudos
If i'm doing a more aerated spray in my hydroponic system, would the nutrient solution reach the plants if the nozzles has water droplets at 7 microns?
Hi Jonathan - Depends on the set up. In our experience, aeroponic nozzles have a tendency to clog.
You need a droplet range of 5-80 microns. Dont use 10-24 brass patio misting nozzles they will clog within days. Run drain to waste using the correct nozzles and you wont have any clogging issues. You wont need to constantly check and adjust the PH/EC or ultimately dump the reservoir because the run-off doesnt return to alter the chemical makeup.
Do you have a veganic nutrient you could suggest? either dry or liquid. Thanks!
Can we use expiry multivitamin tablet as fertilizer
wow, now this is detailed af... great job!
Thanks! Happy to help😀🌱
Great video! I'm trying to grow a citrus plant (oranges), which nutrients ratio should I start? Would it be okay if i start with a higher N ratio, and then switch to a higher PK after its has a significant leafs growth?
Question... i have changed the nutrients in the reservoir, after 8 hours the roots got stained brown i dont this its root rot can be?. should i do something about??? ph 5.8 ppm 800, basil krakty method 1 gallon reservoir. I left the same gap between the roots and level of water it had before water change.
If there are a lot of tannins or humic acid in the new nutrient solution, it can stain the roots - otherwise brown means there was a root die-back.
Omg thank you for this video. Very informative and it explained everything incredibly clear and concise. Thank you so much.
You talk about 16 plant nutrients, but our bodies need 90 nutrients, and 60 of them are minerals. I add liquid seaweed to my mix hoping to get them and I also throw some green sand into my reservoir in the hope that the mycorrhizae will release them for the plants and for us.
City water in San Francisco is about pH 9.5. By the time I add the nutrients it is down to about 6.5. I use pH down or ascorbic acid or distilled vinegar to take it to 6. I got a cheap pH meter from Amazon and it seems to work. I have the Bluelab EC meter but I would suggest trying the cheap ones. I use a bloom mix for the flowers in my yard and I set that at pH 4.5 to hopefully compensate for the high pH of the city water I put on them.
tangobayus Azomite rock dust has 67 micro nutrients worm castings also great over looked organic medium that Full of All kinds of Good Stuff ! Use at 20% to 25% volume w/coco/peat ,perlite & Happy frog or equivalent
Can you make a video about controlling nutrient temperature?
So whats the correct cm and how many hours of oxygen in the water and hour many times a day
Do you use more of these nutrients in hydroponics than you would in "normal" farming?
I can actually answer this, I happen to have a bottle of normal liquid fertilizer I have been using (need to upgrade to hydroponic fertalizer now) right next to me. It contains 87% water 7% Nitrogen, 1.3% Phosphorous, and 5% Potasium, and trace minerals adding up to less than 0.05% none of which are the ones mentioned in the video (almost half of which is Iron).
Hi, I started hydroponic system using NFT technique(water stagnated), I started growing micro greens, marigold, chillies, bell pepper, spinach, fenugreek in pvc pipes... I noticed the plants didn't grew as expected, few plants died, few plants leaves got dried, few plants leafs turned into light yellow...could you please suggest best methods for better growth of plants and supplements requirement....
what happens to ph of the nutrient water while we circulate itr to plants (ph drops to acid or increased to base)help me plz...
I have just ph, my 20ltr buckets and onoe is below 5.5 and I don't have a ph up any advice cheers
I heard that a optimum value is EC 1600 to 2000 and pH +- 6 is this ok ?
hi, how to produce hydroponic fertilizer for home growing. can i use asimple program like as maxigro for all of plants? from where i can find hydroponic formula
how to calculate how much magnesium, iron, etc is present?
Really like the video and all the contents but have a lot of interest in doing a garden outside in soil and we'll have multiple plants my ground is alkali and was curious how to bring it up to a common neutral have a few layers of topsoil and Clay mixture don't have a lot of money to spend on nutrients and not too for sure how to mix it