Land Rover Series Truck: Gearbox/Transmission, Transfer box and differentials oil change how to!!
HTML-код
- Опубликовано: 10 сен 2023
- Following on from my last video where I changed the engine and air filter oil. I changed the well overdue oil from both front and rear differentials, gearbox and transfer case. I explain what oil I used and oil quantities. Hope you enjoy the video and find it useful. Please like and subscribe and leave me a comment. Cheers Jamie
Авто/Мото
Thanks a lot for this: I am about to do the same on an old resto / fixer-upper Here on KZN South Coast. EP 90 in Diffs and swivels too. Ill take a look at your other vids as well. Cheers.
Super that you have found the video helpful and thanks for your comment. Much appreciated. Hope the other videos I have posted are also useful. More to come. Jamie
Hi Jamie, greetings from Lieto. I really like your videos, top work. As I also own a land rover series I have a few tips and tricks. Always loosen the fill plug before the drain plug, because its hard to fill the oil afterwards if can't get the fill plug open. I would also change oils in the front hubs/swivel housings oil, steering box and steering relay. Series 3 109'' have a stronger rear axle, its called a salisbury type diff. The front are a rover type diff. Best regards, Jonas
Hi Jonas, Nice to hear from you and thanks so much for your kind comment.
Really good points you made and information. I mentioned the filler plug but I had only just realized it was a good idea while doing the last one on the diffs😁 I will look into changing all you have mentioned with the hubs and steering etc. I also learnt today that its a good idea to clean the pressure relief valves in the diffs and gearbox. I'm new to these Land Rovers and really enjoying learning about them.
I heard you had a Land Rover and I will have to come and visit.
Take care and hope to see you soon. Jamie
You're our favorite special tool! 😉
always and forever! 🥰
Good job done, great you’ve got the original manual 👍
Its really nice to have the old original manual!!!!
2.5 litres will be for a rebuilt box which is dry thats why you could only fit 2.3 in and there might of been a bit of variation in the bottles. As long as your on level ground and fill until it comes out your fine.
I bought a series 3 truck around April last year and the oils were some of the first jobs that i carried out.
Thank you for your comment. Yes its always nice to change all the fluids on a new purchase. Especially when there is no way of knowing when they were last changed. Jamie
thank for the info
Thank you for your comment. Hope the video was of help. Jamie
Great video, can you tell me what size the copper washers are?
Really glad that you liked it and found it useful. Sorry but I don't know. I have a pack of them In various sizes.
Running the engine isn't going to do much to warm up the tranfer case or diffs. It might warm up the gearbox a bit since parts are spinning but not that much.
Taking the vehicle on a short drive (10-20 minutes) will warm up the trans and transfer case.
Yes you're completely right and realized after I had thought about it. I let it drain for a while and change regularly. Defiantly more regularly than it has been 😂 Jamie
@@jamiedowson6482
defiantly?
@@grahameroberts8109 definitely!
u should have put a magnet in there it does a great job
Also been thinking of doing a transplant to different engine.
I do love that old manual, did the car come with any history ?
It's super cool and think quite hard to find. Luckily I didn't have to look for it as was given too me. I'm actually going to get the history of the car. I actually met a previous owner last week that is a customer. I didn't know he had owned it. Was also featured in an advert many years ago and looked exactly how it does now 😊
@@jamiedowson6482 good to hear, hopefully the history will go back some years. I love all that
u should have a magnet on that drain plug
Unfortunately they didn't have them on this year models I believe. Jamie
Traduire en Francais.Mercie