Rebuilding A Wrecked 2022 Mercedes G63 G Wagon PART 13
HTML-код
- Опубликовано: 3 окт 2024
- We finally did it!!! We fixed the crazy issue that was so hard to figure out. This project is turning out so epic and we cant wait to share the final steps with you guys!!!
Хобби
Well done Dad. The ONLY man NOT gas bagging and actually doing the "work" !! Thanks for sharing. From New Zealand. Well done all. I have enjoyed watching this. Cheers.
When doing compression testing you should always pull the fuel pump fuse and crank it until the number stops going up
yes was cringing a bit lmao
Oh these Dudes don't need any Advice there 10 Steps Ahead of US
They didn't crank it up after that number because it was sounding even worse than before hence they stopped.
@@scaleadventures124 No they didn't stop. They show two attempts. Normal procedure is to pull the fuel pump fuse and remove all sparkprlugs. That way, is the starter not fighting compression in the cylinders, and you are not squirting unburnt fuel into your catalytic converters. It's very basic.
They are good at fixing exteriors, but basic engine skills seems to be lacking a bit.
and take all the plugs out as well. Not so easy on a diesel.
Dam guys what a beautiful AMG. Billy, that clear you dropped is glossy. Outstanding work
Shout out to pop’s for being there for his family.
Why does it sound so loud I thought those engines were less loud
@Los526 they put aftermarket muffler :(
Man I’m sure all the people in the comments know what they are talking about, but there’s just something about trial and error over and over until you find the problem and finding the problem and fixing it that is just so satisfying! You guys are really living the dream haha keep at it!
Happy for you guys!!! I was a tad worried....
Next time on doing compression tests, just pull all spark plugs and let it turn over freely until the gauge stops climbing.
Love the wheel/tire choice!!!
They need to remove fuel pump fuse or fuel will spray everywhere as well.
"We might be doing more damage as we're running this thing...." said EVERY other poster on every one of these videos...while watching the thing get started and revved 15 times a video...LOL. It's better to be lucky that good...hehe. These guys are the luckiest on the planet.... ;-)
you boys need to pull all the spark plugs when doing a compression test. if you pull one at a time you will not get a proper reading because pressure can enter or escape between cylinder. also pull your fuel pump fuse, you don’t want it to start.
Those idiots cannot use any equipment they have
they wo'n't listen to you. jacked up VIN tag says it all lol
I would find the recommended Mercedes compression test procedure. The spark plugs should normally be removed, along with cutting fuel. One of my cars needs the fuel injectors turned off or the car run with the relay removed until it stalls.
@@boogball4699 they don't care.
Lol you don't pull all the plugs.
Well done boys!
Simon was hitting on ALL cylinders in this video! I'm going to cry!!! And - so new no one let one go!!! Classic!
Congrats on getting it out of limp mode - well done!
Wish me luck guys, few days ago I bought my first rebuild.
All the best brother, you've got this! ❤
@@charleskanyangi7040 thank you!
What you get
Yeah what did you got man?
Still think you guys should give this one to pops , he is your biggest supporter and he deserves it for all his running around and assisting you boys .
I liked this more than I would expect, pretty sick ride. Please make sure to include some before footage in the final video, makes such a bigger impact to see where you started and where you ended.
God, she is BEAUITFUL!! You guys did a GREAT job putting her back together.
I told you ages ago it weren't no bent valves. Also when compression testing, pull the fuel pump fuse and put a battery tender on the battery when doing this.
Build a drag car guys!!!! Us old guys like race cars, drag cars, burn out cars? Yeah! 👍👍👍👍👍
Cool 😎 . Glad you guys are problem solvers and don’t give up !
You need to disable the engine from starting when doing a compression test. You can unplug the coil and pull the relay for fuel pump. And pull all the plugs that way that way the engine can spin faster. I figured it was something simple. Good job.
Honestly one of my favorite builds on the channel since the Camaro and the Porsche.
If this doesn't go to Pops, sure wouldn't mind buying stuff to win it in a raffle. That is the best build yet!
Love these guys man, stay determined to find a solution. The gratification is beautiful at the end of a build
Once again you boys done another amazing build. Awesome dude love it. 👍💯
Really awesome 😎 glad you guys figured it out. 👍🏽👊🏽👊🏽
Well a scanner got the issue
That Alex dude at the Mercedes Benz Stealership is one hell of a customer service representative! Soooooo helpful, makes me want a Mercedes!
I wish
Them wheel and tire set up looks great on the G wagon.
Can we get a update on the Porsche and Audi R8. I been watching you guys since the mustang build in your parents driveway. You guys are great to watch.
Way to go guys! So glad the sensor brought it to life! Now you can enjoy the G Wagon for a long long time!
I have never seen Elazar look so worried than when Simon got off the phone with the dealer. 🥺But he pulled up his britches, tighten his shoes, and made it happen. He said I'm that dude. Believe me when I say this.......Elazar you are a great mechanic! Bro, if I lived in Tennessee, I'd take my car to you any day. Or I would work for you, you are truly the epitome of motivation. Not to take anything away from Simon, you guys are a great compliment of each other. For anyone watching this.....IYKYK
One sensor ! Tough on tthe brain to figure it all out but super stoked to see ya all got it out of limp mode ! Runs a whole lot better dudes !
My first time watching you all, and am in love. You guys have a sweet spirit and your boldness in taking on this project mesmerizes. G-wagon ? Wuuuuhh. I own a 2021 G63 and am even scared even opening the hood but u guys are just absolute beasts, your engineering skill are 🤯
if you want more power get with eurocharged performance. they are one of the best mercedes tuners in the us. also when you do a compression test you are suppose to pull all the spark plugs and the fuel pump fuse. then check each cylinder be cranking the engine until you get a max reading on the gauge. all cylinders should be within 10%.
Right on Guys that G Wagon is looking good! I would also be so cool to see a video on the Porsche with maybe a road test on it! Looking forward to the next video!
I am so glad that you guys figured it out! YAY!
That colour really is something else... The G-wagon came out beautifully... Im glad to see it out of limp mode... Much respect guys
As always another amazing restoration, now since you have an AMG consider some weistec upgrades and a tune !!!!! That will wake this beast up easy 100+HP
Thats how hand build engine from Affalterbach at the AMG plant should sound like. AMG produces the Engine in a way, one man one Engine. I live about 40 km away. Greetings from Germany.
“We dont want to run it cause it might damage the engine”… proceeds to rev and race it up and down the road while still broke
congratulation guys for your hardwork and Paps being there ,family togetherness, and a very nice G wagon build.
*A Compression test kit is also very helpful when diagnosing a vacuum leak or EGR related issue with clogged hoses or valves etc*
WOWW so cool thanks SCAMMER CLOWN@visit-Profile
Best car repair channel on Utube
You go guys, please dont forget to paint FR calipre 😀😀😀 though I wouldn't mind driving it as it is
I would SO daily drive this rig. This is right up there with the Porsche as my favorite builds. It is stunning.
Sounds like it was built to sound! MB-awesome paint color!
Bruh ain’t no way you just did a compression test with the fuel still plugged in lucky the car didn’t burst into flames 😂
Um what???
First thing you do before doing a compression test is to pull the fuel pump fuse or relay. You don't want the engine to start when you crank
@@AMLagonda The fuel injectors being cut off prevents raw fuel from washing down the cylinder walls, and causing damage, as well as producing a false reading of the cylinders compression and these 2 goofs probably flooded the engine with fuel causing pre detonation could cause it burst into flames you must not work around modern cars
@@AMLagonda this is kinda common knowledge but apparently not common enough
I am surprised they didnt pull the fuel pump relay, (well not really lol) but it wont "bust into flames"
The Arabian Gray paint looks awesome. The sound completes it. Compliments!
Good job guys. Much respect to Pops. It's always to see him in the house.
The more I see that color.. man it’s absolutely stunning. Great job
Ah yes revving a cold engine ! Nothing can go wrong
Its edited.
Don’t forget to paint that Gray calico RED! ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️ ❤️❤️❤️❤️❤️
Those wheels look fantastic on the G I love those things
Awesome content as always.Thanks for sharing and taking us along
Glad you boys got the limp mode fixed 😅
Awesome job guys. Shout to pops. Love watching feel like family .
You guys have come a long way. The quality of your work is really solid. Glad to see the G63 is sorted. I hope one of your wives gets to enjoy it as a daily driver. Same with the Uris.
Nope they will park it in a field with all the others
@@kred3208 That would be just sad. I hope that isn't the case.
@eclifton4070 it's what happened to all the others so why would this one be any different
Does anyone know what happened with the R8? Did I miss an episode?
still at sheepy as far as I know@@cliffordaugustus9646
This is why I like the channel; you brothers are not afraid of a challenge. You got that Sucker poppin! I must say Mercedes is my favourite car, I owned two so far!
@visit-Profile Really, how do I get it?
I'm glad you've got it figured out it looks good now
pops is the G.O.A.T ....hands down
GWagon came out looking mint! 👌
I love how you guys are really making it look easy to do this
Man that build was fast and came out perfect congrats guys y’all the man’s 💪🏼🔥🔥
Dream monster!! Y'all just raised a G Wagon from 0 👌
next time yall do a compression test, unplug the fuel pump relay XD youll thank me later!
Whats up boys OG fan right here. I remember your dad said that was his favorite vehicle in a video a long time ago. Make that hard working man a happy dad and gift that G63 to the guy. Ya'll have a blessed life now its time to bless the man who made it all possible! Ps. Take that thin blue line flag out of storage and hang that thing up proud!
Hey! it would be great to see some before / after shots at the end of a series. just some quick impressions on how bad the damage was at the beginning.
Think the dealership you are working with are super nice.
Yes, we have a Tuesday video after the Sunday video... I really hope we have the normal uploads again! They were fun to watch
agree. like before.
You get them when ya get them.
😮@@jerrywilcox9890
Quality of the videos have been way up because they upload when they want. Before it was quantity over quality
Looks nice guys! Sounds so much better now too!
feel like a dream you guys already done with this
Nice rebuild looks good,Great choice of wheel's and tire's it does look like it need's an alignment
Hi bros. There may be some oil on top of the pistons. Kindly remove all the plugs and turn the engine a couple of rounds. And resedue present in the enge will come out. Make sure plugs are dry. The install and stary. Hopefully it should work. Cheers🎉
Glad yall got it all figured out. Man those wheels really take it to a whole nother level. Looks sooooo good 😍
Glad the engine is good. You should take a good look at the engine and transmission mounts. Check for cracks. The engine was upside down at one time.
It’s great they found it. I was right in that it was something most likely with the Cam. Either way it’s definitely not wise to start or even rev the engine when you have issues because it can end up costing a lot more money to fix the issue. It’s on wheels and they have wheel dollies.
amazing guys! happy for you!! keep it up!! peace!
My suggestion is at the end of each build series do a compressed video called “rebuilding a wrecked (blank) in 10 minutes”. Not only would those generate lots of views, but we would also like seeing a summery of the last few months of videos we’ve been watching.
God bless you all for getting it figured out and fixed Amen
@visit-Profile Hi buds how you doing how's everything going you guys do such a good job and everything you do it's so glad you figured it all out you did a good job on this one and all the other ones God bless you guys Amen
@visit-Profile Hi guys how you doing how's everything with you guys how's the day treating you you guys did a good job on that g wagon and everything that you work on you guys do a great job on it God bless you guys I'm so happy for you
Glad you got it fixed. You should take it to buckhead to show your guy there what it looks like
Your supposed too disable the vehicle from starting when tyou do a compression test, and crank it until your compresion guage stops climbing
They know now. Lol
@@David-ui8ko clearly they didn’t these 2 dudes have to be some of the most non mechanically inclined automotive RUclipsrs around
@@David-ui8kothey didnt
@@Notdb1gabe I missed the part where they mentioned this was a tutorial. The people who watch and enjoy this are here for VLOG style videos not to actually learn how to fix a wrecked car.
@@cristalteardrop dick riding without a license is crazy 😂
Pops is my favorite squad member. I only watch to keep pops employed.
That is a beautiful piece of machinery and y'all are awesome
Good job guys, you such a talent!
Unbelievable the amount of work you guys have done with this build 👏🏻
Absolutely crispy 😂😂definitely dude!!!
Personally i would take that exhaust off and make a bird feeder out of it….other then that awesome job boyz
They all sound like this
Glad ya found the limp mode issue, enjoyed the build. Car would sound better stock, exhaust sounds terrible in video plus it's a cruiser not a race car.
This is a sick build guys!
This monster sound is amazing I love it ❤
Always start with the small stuff. Sensors,plugs,etc.
What are boys do you know? Great job. Keep up the good work.
Congrats on getting the engine sorted an those wheels look GREAT! Love the Gunmetal lip.
Where’s all the haters in the last post. Now you see they are crazy lucky. Except for one Camero and they fixed it right up anyway. Good work boys it looks and sounds great!
How the heck did u guys find that broken part !!!!! 👍 good job
the best feeling, when you find the issue.. congrats boys
i think it's a keeper! Let's see some epic modes init . Will done guys! Happy to see you getting more knowledge through.
Peace from Palestine 🙏🇵🇸
Not sure how people are hating on those wheels. Those look killer.
I Believe you Guys Found the issue , a bad actuator can definitely put you in limp mode . 👏🏽
Got to be happy with that result
What a machine it is 👍👍
i absolutely love this channel and the builds 😍❤️
Lol Pops will definitely keep that! NICE DAILY RIDE.
You guys killed it, love it and would like to purchase if it's for sale!!! LMK
When you do a compression test you're supposed to pull all the plugs pull the fuel pump fuse to do it right, and it's still not sounding right, it still has a Miss to it
Maybe this will teach you guys to stop starting and revving the piss out of stuff that isn’t running right. Probably not though
Agree with you 100% as they would say! Serve them right if they screwed it up themselves. More money than brains!
They put the broken part back in and ran the crap out of it. They've never bought an expensive engine because they've been lucky.