Thanks but I would like my winch up higher and solenoid in a cleaner spot. I'll just make my own mount with the roller in alignment to the spool. All the wires should have protective nylon loom . Keep it trouble free & fun!
Hey Max. Great video!! Yours is the second video I’ve seen now where the red “free spooling” knob is on the right side of the machine. My Honda/Warn winch was installed at the Honda dealer at the time of delivery and the red knob is on my left side. Does that mean that the dealer installed it upside down? My in-out switch works correctly. Is the line supposed to feed in from the top or the bottom of the spool? If mine is set up upside down, any negative impact? Thanks.
The way I have it set up is the proper way there are a few different winches that can we put on this machine though and they might go in a different direction or not on the one I installed the cable comes off the top of the spool but either way will be fine… just take a good look and make sure the winch line is not rubbing on any of the support bars for the winch or on the mount if it comes in contact with any other surface it will cause premature aware of the cable
@@Maxsmotoshop I took a look and not only is it mounted upside down but the line winches in from the bottom and not the top. As a result the cable is getting frayed due to the fact that the cable takes a sharp turn down after the rollers and is actually rubbing on the oval opening on the winch plate assembly. Calling the installing dealer tomorrow. Thanks ago for the info.
I have two questions. At 5:54 you install a bracket with four bolts, from the winch to the frame. Is that part of the winch package or the mounting bracket package? Also I just bought a 2022 and through what I researched, there have been no design changes. Is it safe to assume this mounting bracket will work with mine? I want to use a Warn VRX 35. Your video was hands down perfect. Subscribing now.
The bracket I installed with the four bolts is provided in the mount kit and there are no changes to these machines all parts will work for the 2022 Check the Honda ATV website under accessories for the part numbers are used👍
There’s also a new winch mount kit that has been released. I have also released an updated video for that kit. If you have it here is the video. How To Install A Warn Winch HONDA TRX 520 / 420 ruclips.net/video/nwjajJwc0dU/видео.html
Do you just leave the Black and Green wires from the Honda harness loose and unconnected up top after you connect the one black/white hot line from the winch control? I would think you should splice those in to the Black and Green on the winch control so they are connected to the winch relay down below?
Does that sub wire harness come with the kit? If not what's the part number. Just purchased the kits through Honda, don't see a sub harness. (2022 foreman 520)
Those are bullet connectors👍 they click in and out I put tape over them to keep moisture out And for a little extra security to make sure they can’t be ripped apart
I believe Honda has updated the winch in the last few months and it is slightly different but check the Honda ATV website under accessories to find the part numbers I will do an updated video as soon as I get my hands on one
Yeah it’s very tight but I can reach my hand in there and get the nuts started and then I use my 18 inches of extension with a universal to tighten them
Yeah it can be a little difficult the first few times make sure you get the plastic mounts underneath the front of the hood and then line up the top boats and slide them in place and then you’ll need a lift the whole bumper assembly up and push towards the rear of the machine to line up the rest of the mounts… The newer ones kits are slightly different than the one I installed in this video and will require a little bit different procedure once I get a chance I will make a video about them
Right, however I would not trust the Honda dealer(at least the one near me) to add anything to my unit. Mostly high school kids with no experience. Barely trusted them to put it together….stripped several bolts and scratched the paint….ugh.
@@Maxsmotoshop Really appreciate the video my man! Does this harness basically make it more "plug and play" ? And keep us from having to worry about splicing wires? Thanks in advance !
The easiest winch I have ever installed was on my new Polaris !! One plug in and two battery cables !! Great video
Thanks 👍
I’ve been waiting a while to see one on a 520. Thank you bro, that’s a great video!
You’re welcome thank you for watching👍
Hey Max, great video. I purchased a similar winch to this for my foreman and your video helped a lot. Thank you!
👍
Thanks but I would like my winch up higher and solenoid in a cleaner spot. I'll just make my own mount with the roller in alignment to the spool. All the wires should have protective nylon loom . Keep it trouble free & fun!
👍
Thanks for taking the time to film, edit, and post this. It's nice to have a basic idea of what's involved before starting.
You’re very welcome glad I could help👍
Hey Max. Great video!! Yours is the second video I’ve seen now where the red “free spooling” knob is on the right side of the machine. My Honda/Warn winch was installed at the Honda dealer at the time of delivery and the red knob is on my left side. Does that mean that the dealer installed it upside down? My in-out switch works correctly. Is the line supposed to feed in from the top or the bottom of the spool? If mine is set up upside down, any negative impact? Thanks.
The way I have it set up is the proper way there are a few different winches that can we put on this machine though and they might go in a different direction or not on the one I installed the cable comes off the top of the spool but either way will be fine… just take a good look and make sure the winch line is not rubbing on any of the support bars for the winch or on the mount if it comes in contact with any other surface it will cause premature aware of the cable
@@Maxsmotoshop I took a look and not only is it mounted upside down but the line winches in from the bottom and not the top. As a result the cable is getting frayed due to the fact that the cable takes a sharp turn down after the rollers and is actually rubbing on the oval opening on the winch plate assembly. Calling the installing dealer tomorrow. Thanks ago for the info.
I have two questions. At 5:54 you install a bracket with four bolts, from the winch to the frame. Is that part of the winch package or the mounting bracket package?
Also I just bought a 2022 and through what I researched, there have been no design changes. Is it safe to assume this mounting bracket will work with mine? I want to use a Warn VRX 35.
Your video was hands down perfect.
Subscribing now.
The bracket I installed with the four bolts is provided in the mount kit and there are no changes to these machines all parts will work for the 2022 Check the Honda ATV website under accessories for the part numbers are used👍
Thanks! this was a great overview and helped a bunch
👍
I noticed you used a different method for winch installation on a 22. Are they different or do you find one method more efficient than the other?
After installing about 100 of them, I have found a few short cuts👍
There’s also a new winch mount kit that has been released. I have also released an updated video for that kit. If you have it here is the video. How To Install A Warn Winch HONDA TRX 520 / 420
ruclips.net/video/nwjajJwc0dU/видео.html
@@Maxsmotoshop Perfect, thanks. I will use the 22 video as my guide. Cheers.
Where did you get the bracket for the relay? Been looking for one so I can follow your video exactly!
Everything I use comes in the winter coat from Honda go to the Honda ATV website and check other accessories
Do you just leave the Black and Green wires from the Honda harness loose and unconnected up top after you connect the one black/white hot line from the winch control? I would think you should splice those in to the Black and Green on the winch control so they are connected to the winch relay down below?
@ 14:43
Black and green wires on the sub harness or four different accessory like heated grips leave them taped up
What is the part number for that sub harness?
How much time would you say you spent doing the full install? Thank you!
It takes me just under two hours but I do a lot of these👍
Does that sub wire harness come with the kit? If not what's the part number. Just purchased the kits through Honda, don't see a sub harness. (2022 foreman 520)
The sub harness is sold separately. Here is the part number. 08Z01-HR3-A20
At around the 12:00 mark, does the winch wire just need to be slid into the rubber boot thing and taped? Does it need to be crimped?
Those are bullet connectors👍 they click in and out I put tape over them to keep moisture out And for a little extra security to make sure they can’t be ripped apart
Ty ....Glad I watched this. Having the deal do it lol.....
What KFI mount product number did you use? There's 102175 & 101175. I have a 2022 Foreman trx520. Thanks.
I use Honda original accessories not KFI to find them find the part number go to the Honda formula website under accessories
Do you have a link to that winch? I want to get same one so can follow your video install
I believe Honda has updated the winch in the last few months and it is slightly different but check the Honda ATV website under accessories to find the part numbers I will do an updated video as soon as I get my hands on one
How the bleep did you get the inner 15 mm carriage bolts into that damn bracket? I've tried needle nose pliers and nope!
Yeah it’s very tight but I can reach my hand in there and get the nuts started and then I use my 18 inches of extension with a universal to tighten them
Can you still access the front diff fill and drill with the wench on??
Yes
@@Maxsmotoshop nice my polaris 450 sportsman the winch has to come off ugh!
Nice clean work 👍🏽
👍
Does this video apply to the 2022 TRX Rubicon Deluxe.
Yes it does👍
The winch’s will not last long mounted there and if you riding mud water areas, in less than 2 years, you’ll understand.
👍
Would this work on a 2023 Rancher 420?
Yes, the install will be the same on the 420 500 and 520
Thanks Max!
Any chance you can link where to buy the winch and mount?
Go to atvsxs.honda.ca/ and check the accessories menu👍
@@Maxsmotoshop the link don't work. Thanks
Try it one more time I gave it a quick update
@@Maxsmotoshop thanks .
Can you give me the part numbers for both the winch mounting bracket & the sub harness used please? Also, what model of Warn Winch is it please?
Next time I’m in the shop I’ll take a look if I can remember
@@Maxsmotoshop Thanks, appreciate it.
@@Maxsmotoshop Any luck with part numbers buddy??
08z08hL5a00 Is the sub harness. Sorry about the way it slipped my mind
08L74HR3A20 is the mount kit and 08L71HL5A02 is the winch itself
Should’ve used some blue loctite on those bolts.
👍
Man putting my bumper back on is such a pain !!
Yeah it can be a little difficult the first few times make sure you get the plastic mounts underneath the front of the hood and then line up the top boats and slide them in place and then you’ll need a lift the whole bumper assembly up and push towards the rear of the machine to line up the rest of the mounts… The newer ones kits are slightly different than the one I installed in this video and will require a little bit different procedure once I get a chance I will make a video about them
Would be nice if Honda offered from the factory.
Would be, but it’s also a quick job for the dealership to throw on before you take your machine home
Right, however I would not trust the Honda dealer(at least the one near me) to add anything to my unit. Mostly high school kids with no experience. Barely trusted them to put it together….stripped several bolts and scratched the paint….ugh.
@@johnferreira174 yeah, that is definitely a common problem
That's a lot easier than the 250 recon where you mount the plate to the frame. Ugly
What was the Honda part number/name for the harness you used by the cig outlet?
08z01-hr3-a20
@@Maxsmotoshop Really appreciate the video my man! Does this harness basically make it more "plug and play" ? And keep us from having to worry about splicing wires? Thanks in advance !