How To Install A Warn Winch HONDA TRX 520 / 420 / MAX'S MOTO SHOP
HTML-код
- Опубликовано: 26 апр 2022
- In this one I install the Honda warn winch onto the 2022 Honda Rubicon 520 this install will be the same for the foreman and the 420 as well if you have any questions leave them in the comments below thank you for watching.
As an Amazon Associate I earn from qualifying purchases
Synthetic Winch Rope: amzn.to/3JAnx6D
TOOLS I USE!!!
DeWalt Impact/Drill Combo: amzn.to/3F0m5sF
T-Handle Allen and Torx: amzn.to/3KTHRSF
Bike Stand: amzn.to/3Zyig5Q
amzn.to/3ZFf34y
Tire Spoons: amzn.to/3mtIoRb
Rim Saver: amzn.to/3ZJTRKq
Hear Are the links for the products I have installed on my Sur Ron
JFG Foot Pegs: amzn.to/3SOwZHA
Kemimoto Foot peg support bar: amzn.to/3Jfergv
Plug and Play Headlight Kill Switch: amzn.to/3EYtAjS
JFG Handlebars: amzn.to/3SPFhim
Pro Taper Pillow Top Grips: amzn.to/3ZC0LBw
JFG Rear Mud-flap: amzn.to/3KYC0LW 
Хобби
![*SUPER RARE* THE PARADIGM IS BACK?!?!? Fortnite Item Shop [August 6th, 2024] (Fortnite Chapter 5)](http://i.ytimg.com/vi/ru6xSH1RaPw/mqdefault.jpg)
Synthetic Winch Rope: amzn.to/3yymrTv
By far the best instructional video for a winch install onto a Honda. Thanks for the time and effort put into making this.
You’re very welcome I’m here to help👍
This video will 100% get you to an installed winch. Thank you!
Good amount of detail, really helps out when planning on how to do these jobs yourself.
I feel like I might’ve went overboard and made the video too long but it’s all good information I hope you found it useful👍
@@Maxsmotoshop it’s useful when your trying to figure out the best ways to get the job done, appreciate the video
Great instructional video. Better than I have seen prior. Could you provide information on the mounting plate bracket and who makes them? I like the fact that the winch is mounted on top instead of upside down like other brands.
This is the warn winch and mount
Glad to see you’re using knee pads I suggested a while back. Wish you were in our area!!! Would love to be a youngster and have you as a mentor!!! Excellent job and video!!!
Maybe one day!
Am I doing this right? all the parts I need add up to $730. using Honda parts?
why is the parts list not in the description you said it would be there?
Edit:
Here's the kit:
08L70-HR6-MF0
winch
08L71-HL5-E61
subassembly for the winch:
08Z01-HR3-A20
substitute subassembly for above if you dont have the 12v socket
socket 08Z00-HR3-A20
check you manual or fitment site to make sure
Wondering the same thing. I am in the middle of this install, and was wondering where the bar clamp was. For $400, I think I will come up with something else. For the cost, all of this stull should be included with the winch.
NIce vid. Just a question. Just picking up our rancher new next week. Was planning on winch and attach plate sourced from amazon (warn or superwinch brand) Can i ask if felt it was worth paying the way higher price for the honda dealer supplied kit with the extras?
Lastly, if you were buying a plow again any suggestions now that you have installed one? 100% happy with brand and model? Cheers
I’ve been installing these for years you go at this brand because it is quality they can still have problems, but usually seem to last the life of the machine. The Honda plow and mount are very sturdy and well built will not bend, but there are a few decent aftermarket brands as well.
Excellent
Thank you! Cheers!
Great vid!
Will this also work on a 2018 Rubicon?
Thanks! And keep up the great content!
Yep
@MaxsMotoShop Thanks you!
2024 Rubicon. Good to go. Thank you.
A most excellent and informative video. thank you, sir. What does a typical Honda shop charge labor to do this install? Also, I much prefer this install as opposed to the top-mount exposed unit.
Cheers from N/W Louisiana.
Personally, I can install this winch in just over an hour, most people take around 2 to 3
@@Maxsmotoshop thanks!!
Hey man, I have a question.
On the sub harness, you mentioned one of those extras pair of wires are for heated grips. Can you use those wires to install the Warn Hub bluetooth controller? Thanks
The extra wires are positive and negative. You can use them for whatever accessories you would like.
The warn 2500lb winch I just Installed on my son's '22 Honda recon 250 has jenky wire lengths. We made it work but the color coded wires were all backwards. Just an FYI.
You most likely ordered a generic winch kit and mount not the actual Honda accessory made for the machine
This kit is a Honda accessory and fits perfect👍
@@Maxsmotoshop much easier install on the bigger machine by the looks. The mounting plate we used from MOOSE industries got mounted to the diagonal frame member near the steering column. Had to pre mount the winch. Not fun
@@Maxsmotoshop I saw a video and ordered what was in the description. They were using '22 recon so I figured I was safe. It works great . He's happy. Solid dad points
hello I would like to know if a warm 3500 is too big for a 520 rubicon and which support model you take thank you :)
I don’t think there will be room in the frame the 2500 pound is tight as it is and is also more than enough to pull this little machine around
I hope I have all of those parts
I'm about to put one on my rancher and thought you might know if what seems upside down to me like this winch is put on is this the only way they fit? Every honda video on here I've found puts them on that way. Seems upside down one because of the emblem and two because I don't want to run my wires down the exhaust side and wanted to know if this is the only way.
This is the correct way to install the winch
So any tips if you need to put a new cable or strap on the winch. I feel like I'm gonna have to at least pull the bumper off.
It only takes 5 to 10 minutes to pull the front bumper off and remove the winch from the machine. If you need to change the cable it’s usually fine though keep it clean and untangled while you’re winding it in.
@@Maxsmotoshop Yeah, I wasn't a fan but got it done. Like a said not hard just annoying when it's cold out
Hey could you please provide me with the pain number or link to where I can get the relay mount clamp so I can use that on my atv!!.
The relay mount came with my winch kit this is a Honda original accessory kit not an aftermarket
@@Maxsmotoshop yea but I’m the kit doesn’t it give you a part number for all the prices in the instructions. They usually do that. I really need that mounting bracket. Is it possible you can help me get one. Can I order it from Honda?
@@Maxsmotoshop can I at least get a link of the winch kit from Honda so I can order the whole thing then. Or at least the part number to the kit. Thanks.
Great video that helped me install my winch on my 23 Rubicon. Where did you get the clamp to clamp the solenoid to the frame bar?
Everything I used in the install came in the Warren Honda accessory kit
@MaxsMotoShop where did u buy it from or do you have that part number?
I bought the WARN 101020 VRX 25-S Powersports Winch with Handlebar Mounted Switch and Synthetic Rope: 3/16" Diameter x 50' Length, 1.25 Ton (2,500 lb) Capacity
It came with no relay bracket. Pretty disappointed about that.
Do you need the sub harness?
Yes
That solenoid bracket did not come with my warn winch mount kit and all terrain the company I ordered from told me there was no such thing
This is not just the warn kit. It is a Honda original accessory kit. Sounds like you have a generic warm kit. If you go to the Honda ATV website under accessories, you can view this kit.
Has anyone had any luck finding the contactor mounting bracket? Thanks
Is that a cb 650 in the background, I need the front brake assembly from caliper to master cylinder.
That would be a CB 750 dual overhead cam
Are you parting it out ? I need the front brake assembly.
@@doughill4070 I might have an extra
Did you have one ?
Will all these parts fit on the 22 rancher?
Yes, it will fit a TRX 420
where did you get the winch?
From Honda
Will these parts work on a 2023?
Yes
What size of winch is that
I believe it is the 2500 pound
@@Maxsmotoshop thank you going to try to put a 4000 lb winch on mine if it fits.. I'll find out soon 🤣
@@Vhiadra That’s kind of a waste the machine only weighs about 700 pounds and if you use a poly block the 2500 pound becomes a 5000 pound
@@Maxsmotoshop I know that, but I have a brand new 4k winch here if it fits it'll be going on, rather then buying another winch lol
@@Vhiadra oh ya 👍
wonderful DIY video. Well done. Gosh, these Honda's seem like a lot of work to install a winch compared to the new Polaris Sportsman's. Wish, Honda could design/engineer a plugNplay system, like Polaris.
Well, they had to do something right on those places
Where can I find that bracket for the relay
It will come in the box with the winch or the mount
You need a hoist
Y??
So tour not sitting or laying of the floor.
But you do you
Your explanation of connecting the sub harness SUCKED!!!
The other 30,000 people seem to have got it it must YOU 👍
I just watched that part of the video could not be more clear and once again, nobody else has been confused
Yeah I never saw a clear explanation of it. If you wanna point it out then it could help.
Will all these parts fit on the 22 rancher?
Yes👍