Another thing: on these cars with Sync, there is a mini-USB diagnostic port on the underside of the SYNC cpu above the glovebox. I have a cable plugged into it, ran it up the passenger side A-pillar trim, then under and across the headliner to power my dashcam next to the rearview mirror. It goes on and off with the ignition. Easy peasy. (I have a '10 SES with leather & all options. Probably the best used car I've had.)
I will look for that.. I am a scientist (biologist) and computer person .. geek .. that is why this is so interesting to me. the Computers. my son reprogrammed the FOB.. and that is what started us all on first looking at "computers" on these Fords.. thank goodness for the guys out there trying to DIY it, Dealerships are big bucks.. which is getting in short supply.
Thank you SO MUCH. I also had the "tire pressure" on but I got rid of it by filling my tires and then used an OBD11 to scan and erase the "faults" (in VA you have to ZERO faults to pass inspection) so I had done that: and then RECENTLY FOUND this video.. after (with my son and husband all three of us) watching Utube and working on the fuses. And EVERYTHING IN THIS VIDEO worked. The Engineering Mode and the Sweep. AMAZING. I still have to take to the VA inspection station though.. but almost there. THANK YOU CAR GEEKS.. all cars have these computers built in.. it is finding them and sharing them. THANK YOU SO MUCH.. like you said: Peace ! :) Even I think it is interesting and normally I am not a car person.. :) LOL.. except to drive it on the way to get my nails done or shop.. :)
@@IsabellaHale did you have a tire pressure low warning or a tire pressure sensor fault? If it's a warning then filling the tires should get rid of it, but does the OBD2 show tpms codes on the Focus?
@@dubmob151 I couldn't tell the codes meant: it showed codes. . that was a while ago. I should have looked the codes up on Google but I didn't. I had brand new tires so and it was also change of temperature like the tires deflate a little in the winter; and I am not an expert at all. I did buy a NEW OBD2 Reader from Amazon since that is an old OBD2sensor which will give more information than that old one I was using.. :) 20.00 is worth it and my car just passed inspection. My son told me it was the stem sensor in my front tire driver's side because I apparently hit a curb. OOPS no I don't drink lol... but I double park really close to me own curb at home. and apparently that was what it was. I can't remember what the code or the sensor said. I am trying to think but it was last year. TO MY BEST RECOLLECTION IT SAID LOW TIRED PRESSURE on the "FORD DASHBOARD" scree. I actually did do the SWEEP thing too... but my son was right... and I JUST PASSED VIRGINIA INSPECTION so I AM GOOD TO GO FOR TWO YEARS. I wish I could be more helpful. When I my son comes here next week .. I will ask him if he remembers exactly what we did.
This is a awesome feature, thanks for making this video, I've got to try this with my car, never knew the 2008 - 2011 focus had this . Definitely gonna subscribe to ur channel.
Awesome video! Thanks man. Also I do have a question, i have a 2009 sel ford focus and I should have the exterior temperature sensor but I just can find any information about it online and my car doesn't display it. Any ideas how to turn it on?
My 2011 ford focus ses keep showing tire pressure monitor fault even though the tires and sensors are good. It disappears when theres a bump or if I hit the dashboard few times but it comes back. Its not that big of an issue but I feel like when the fault comes up, my ac stops working and my headlights suddenly brightens up, but if I hit the dash a few times it goes back to normal and the car sounds differently when that happens. Does anyone know what the problem is with my car? Is it ok to leave it like that or should I get that fixed asap?
As soon as I try it for my 2008 Focus the computer comes up low tire pressure. Even though the tires are fully inflated. Engine Test Mode never comes up.
Have a 2010 focus with the same issue, The batteries in the TPMS sensors located on the valve stem on your tires are most likely dead, I suggest replacing them on your next tire change.
This helps so much, would you have any suggestions how to manually override the door ajar-message showing, which is preventing me from visually starting from Trip B?: or should I just replace the part for now? - Thanks again.
Wonder if you can wipe that stupid useless my key from here. I stupidly and accidentally programmed it on my 2011 Ford focus and it's been nothing but a fkn nuisance since! Great video, by the way. I'm gonna try this regardless.
Method for quick reference: With the gauge display set for Trip B, turn off the car, then press and hold the Reset button while starting the car. After the gauge cluster display shows it going into the engineering mode, release the reset button. Press reset to cycle through the various gauge modes.
@@joealan369 mine just started displaying tire pressure sensor fault, 2010 with 90k miles. Maybe the batteries in the sensors are getting low. Is that the typical reason they show the fault?
Also when I found out mine work with this feature dose not stay like that you'll havecto do this every time that part is lame lol but thanks for the tip
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Another thing: on these cars with Sync, there is a mini-USB diagnostic port on the underside of the SYNC cpu above the glovebox. I have a cable plugged into it, ran it up the passenger side A-pillar trim, then under and across the headliner to power my dashcam next to the rearview mirror. It goes on and off with the ignition. Easy peasy. (I have a '10 SES with leather & all options. Probably the best used car I've had.)
I will look for that.. I am a scientist (biologist) and computer person .. geek .. that is why this is so interesting to me. the Computers. my son reprogrammed the FOB.. and that is what started us all on first looking at "computers" on these Fords.. thank goodness for the guys out there trying to DIY it, Dealerships are big bucks.. which is getting in short supply.
I may have a bad module or radio.
Thank you SO MUCH. I also had the "tire pressure" on but I got rid of it by filling my tires and then used an OBD11 to scan and erase the "faults" (in VA you have to ZERO faults to pass inspection) so I had done that: and then RECENTLY FOUND this video.. after (with my son and husband all three of us) watching Utube and working on the fuses. And EVERYTHING IN THIS VIDEO worked. The Engineering Mode and the Sweep. AMAZING. I still have to take to the VA inspection station though.. but almost there. THANK YOU CAR GEEKS.. all cars have these computers built in.. it is finding them and sharing them. THANK YOU SO MUCH.. like you said: Peace ! :) Even I think it is interesting and normally I am not a car person.. :) LOL.. except to drive it on the way to get my nails done or shop.. :)
@@IsabellaHale did you have a tire pressure low warning or a tire pressure sensor fault?
If it's a warning then filling the tires should get rid of it, but does the OBD2 show tpms codes on the Focus?
@@dubmob151 I couldn't tell the codes meant: it showed codes. . that was a while ago. I should have looked the codes up on Google but I didn't. I had brand new tires so and it was also change of temperature like the tires deflate a little in the winter; and I am not an expert at all. I did buy a NEW OBD2 Reader from Amazon since that is an old OBD2sensor which will give more information than that old one I was using.. :) 20.00 is worth it and my car just passed inspection. My son told me it was the stem sensor in my front tire driver's side because I apparently hit a curb. OOPS no I don't drink lol... but I double park really close to me own curb at home. and apparently that was what it was. I can't remember what the code or the sensor said. I am trying to think but it was last year. TO MY BEST RECOLLECTION IT SAID LOW TIRED PRESSURE on the "FORD DASHBOARD" scree. I actually did do the SWEEP thing too... but my son was right... and I JUST PASSED VIRGINIA INSPECTION so I AM GOOD TO GO FOR TWO YEARS. I wish I could be more helpful. When I my son comes here next week .. I will ask him if he remembers exactly what we did.
This is a awesome feature, thanks for making this video, I've got to try this with my car, never knew the 2008 - 2011 focus had this . Definitely gonna subscribe to ur channel.
I tried it and it worked great. I like the digital speedometer.
@@CJ-Binksmine does it to, i think you have to do it every time
Awesome video! Thanks man.
Also I do have a question, i have a 2009 sel ford focus and I should have the exterior temperature sensor but I just can find any information about it online and my car doesn't display it.
Any ideas how to turn it on?
Another new 1 on me.
The upper left fuse,2nd from top is power to the multi function display. Mine is powered up,ambient temperature is on upper right.
Well thank you for showing us how to open the door. But I would like to know what to do once I'm inside the door.
Need more videos for this car bro!! thks
What a can of worms
didnt work on my 2010 focus, is it because i dont have sync on my radio?
I'm just trying to figure out how to get back to see how many miles left until my gas tank is empty lol
Press reset button under the AC buttons
Press the info button until you see it
Make sure someone holds your hand at disnyland 😂
Press the reset button it works in my 08 Ford Focus SE Coupe
@@tommyvarcity2783 yeah your mom holds something else of mine when i take her to "Disneyland"
My 2011 ford focus ses keep showing tire pressure monitor fault even though the tires and sensors are good. It disappears when theres a bump or if I hit the dashboard few times but it comes back. Its not that big of an issue but I feel like when the fault comes up, my ac stops working and my headlights suddenly brightens up, but if I hit the dash a few times it goes back to normal and the car sounds differently when that happens. Does anyone know what the problem is with my car? Is it ok to leave it like that or should I get that fixed asap?
The stem receives,the sensor has awire.likeabs.chek there.agood reader can show bad wheel
Yors has issue too
Any progress on electrical bugs?
As soon as I try it for my 2008 Focus the computer comes up low tire pressure. Even though the tires are fully inflated.
Engine Test Mode never comes up.
Same here
Same!!!! Did you found out a way to fix that? I’m completely new to this 😅
ruclips.net/video/Q-S_tjr8Y_c/видео.html
same and I have a 2010
Have a 2010 focus with the same issue, The batteries in the TPMS sensors located on the valve stem on your tires are most likely dead, I suggest replacing them on your next tire change.
Thank u sooo much I really wanted a speedometer for 2008 ses but didn't knew it has already in it. Thank you soo much for the video.
Thank you for this! Just got one of these yesterday, so this is awesome to know about.
Do you know if the time clock on this exact model can be set to 24 hour mode?
Good question, my Mil is off. Next thing is which module or modules are suspect an̈d what they control. No clock,heat,radio.
Hoping you upload some more.
How do you get the car set to TRIP B?
Press the Info button to cycle through
Hech ya man thanks I didn't even no this it worked on my 2011 it's nice to knock how your car is running
Throttle Control/Transmission: Illuminates when a powertrain fault has been detected. Contact your authorized dealer as soon as possible.
I have experience d the flat spot on occasion.
hey great video do known anything about the transmission on these cars
No experience with focus auto trannys. Troubleshooting 2011 focus electric system 🎉
This helps so much, would you have any suggestions how to manually override the door ajar-message showing, which is preventing me from visually starting from Trip B?: or should I just replace the part for now?
- Thanks again.
Yo también tengo el problema del indicador de la puerta en el tablero, pudiste resolverlo?
It’s a door latch issue, you either pay for it 1/4 chance to fix the right door latch or just let it exist. I’m still 200k miles with it.
Do you know anyways to remove mykey without programming a whole different key?
Did it rest your ODOMETER also?
do i have to do this every time i turn the car on?
Thank you very much ! I didn't know that
How do you do this if you don't have a reset button???
My car has those same 3 dash lights my car won’t move how do I fix that problem
Doesn’t work on mine, probably because of that stupid “Tire Pressure Sensor Fault” warning popping up every time I start the car
Guessing that’s why mine doesn’t work either
Any news?
works on manual shift too huh?
Wonder if you can wipe that stupid useless my key from here. I stupidly and accidentally programmed it on my 2011 Ford focus and it's been nothing but a fkn nuisance since! Great video, by the way. I'm gonna try this regardless.
How can it be made to keep the speedo on
What is the font letter in the video thumbnail?
How do you have Bluetooth
This works on my 2010. No Sync system. Just the base model focus.
Method for quick reference:
With the gauge display set for Trip B, turn off the car, then press and hold the Reset button while starting the car.
After the gauge cluster display shows it going into the engineering mode, release the reset button.
Press reset to cycle through the various gauge modes.
Thanks,maybe morrow if rain let's up. Doing research
How much time does it take?
How to reset the speed limit mode
Good question
This one was in rental mode/parental.would notgo 70 and seatbelt fastened to play radio
How did you figure this out
Just messing around if I remember correctly!
how to set to trip b
2008 Focus Sedan my rear power locks won't disengage, so the back doors won't open at all.
Also, I can't get my phone to sync. Any ideas?
Pull the fuse and disconnect the battery for 10 minutes. After that put the fuse back in and reconnect your negative terminal
Is the child lock activated in the back? You have to manually remove it. Should be below the door handle
I’m looking at one 341875 on on it
How to turn it back off tho
Turn the key off
Mine either come up low tire pressure. Even though I have enough air pressure.
Or Tire Pressure sensor fault. And they're at least $75-85 each
@@joealan369 mine just started displaying tire pressure sensor fault, 2010 with 90k miles.
Maybe the batteries in the sensors are getting low. Is that the typical reason they show the fault?
W ass mans bro make more videos🤝
2010 here , doesn't work buddy!only models with Synk.
Not working for me ?
it does not work on my 09 ford focus SE
Why no more videos man
Seriously ??? 192000 Miles ?!! That's awesome.
Also when I found out mine work with this feature dose not stay like that you'll havecto do this every time that part is lame lol but thanks for the tip
No me funciona en el 2011.
Mines not working
Any more details?
Cool
Pliz help
I found the video,I don't have all the answers. Dash ok,pulled radio fuse
I get intermittent feedback,ac turns on myself. 12volt bugs.sync did not know
My Sync Bluetooth keeps fucking disconnecting, fix solution pls😢
The biggest secret, you have to have the car on to change the clock
My display is black.
Powered mine up,no clock or radio,outside temp is there and ford focus. The display is working.
Doesn't work I've tried multiple times and nothing
U didn't do it right then lol jk
You have heated seats!!!!! Wtf
I do too in mine 2010 SES
@@wiener4718 2009 ses here. Guess I’m a year early.
Dealing with a no start issue right now. Hopefully will be back on the road soon
I do too,2008 ses
wait until you find out some if them have stock LED ambient lighting
Mine is a 2010 SEL with heated seats, sync, sunroof, subwoofer, led ambient lights