I had a few light strikes when I first got my pmr. I slightly modified the firing pin to allow another 2 thou of protrusion. Has ran great for thousands of rounds since.
WAS recently at the range with my new PMR 30. The only thing that was done prior to shooting was thoroughly cleaning the gun and lubing it. I shot 600 rounds using 4 magazines & various ammo types of different manufacturers. I loaded four magazines with the ludex speedloader and did not condition the ammo during the loading process as per kel-tecs recommendation. The only pause in shooting came from either loading another mag or stopping to reload all the mags which took a bit of time. I had a total of five failures: 4 failed to eject and a single failed to feed for a whopping 0.0083 percent failure rate. YES I'M VERY SATISFIED WITH THE PERFORMANCE OF THIS 22 MAG SEMI AUTO.
I just got mine last week,brought it home took it apart oiled it and the mags and it ran flawless. Very accurate I’m glad I bought it and it’s American made. CMR 30 is next on my list
I now have 5 22/22mag handguns and I'm just tired of hearing the word "PLINKER"! First of all I have Not and Never Will call my PMR30 a Plinker but I will call it an Awesome, self defense weapon! I will never enter into a Pointless Debate with those who believe that anything below a 9mm, is not considered a Viable Carry gun! Having said this, I can go back in History and prove my point But I won't waste my time because I'm 79 years old and I'm ready for my Nap! Good Luck All!
5.7 and 22wmr have the exact same pressures and ballistics. Best part is 22wmr is ⅓ the cost and has hunting, target and self defense loads compared to 5.7 that just has high speed $2 a bullet price point.
I have both the PMR30 and CMR30 with 2000 rounds through PMR and 1000 rounds through CMR. Only issue I had was caused by a cracked magazine which failed to feed last round. As to ammo I found 36 Grain VMAX rounds have a tendency to keyhole in my PMR and I have read this is related to early models with fluted barrel. CMR does not have this problem and handles all grain weights without a problem.
These are very hit and miss mine I just bought runs super well but I've seen some that are a pain in the ass. Also they make an all in one kit that is awsome
Light tubes may fall out of the sights in first few rounds. Firing pin can break before 500 rounds. Buffer pad will be done before 1000 rounds.... and it's ammo sensitive. But, it's a thrill to shoot!!!!! Get the uplula loader specifically for those mags and don't forget the rifle that uses the same mags, the CMR-30!!!
I love mine!!! I know I've heard people talk crap about the grip size, and how its too big front to back, but the same people purchase a Ruger 5.7 pistol and rant and rave about it. The Ruger is the same size, so I'm sure snobbery has something to do with it.
I just brought my pmr 30 out the closet when I first got it I thought it was a little toy it stayed in my tackle box but now I see it's a good round to back me up when I'm hunting too. Deadly with squirrels,rabbits and to finish off deer I'm thinking of getting another one soon. It's a dang shame that it's so flimsy I keep feeling like I'm gonna break it 😂. And I need a holster for it any good ideas
22 WMR is a bad a/ss round! Sending 30 rounds of this down the hallway will stop anybody. Mine likes all bullet weights... 30 grain, 35 grain, 40 grain, 45 grain, and 50!
I love the Kel-Tec Platform and I have two P17's and the CP33 which I love! I am debating about buying this gun and this is a great review that might convince me!
But you were smiling when firing. They're even sweeter with the MCarbo upgrades if you want to put another $250 in it. 22WMR x even 25 rounds is a self defense weapon in close range. Little fire breathers.
Had my new PMR30 blow up in my hands. Company said they knew of the defect but did no recall. Took months to get my money back from the company. Keltec is synonymous for "JUNK" .
New Yorks New firearm permit scheme. How long before other anti firearm states try the same thing. New York is requiring citizens who want a firearm permit, or renewing a permit to attend a class, qualify with a firearm, submit personal information from social media, relatives. Present and past spouses, psychological evaluation, Then you have to go before a judge. Next you have to go before the officer who signs and gives you the firearm permit. None of the programs mentioned above are in place, and who knows how long before lt begins. Just another tactic to delay, or in the long run make it harder or impossible for citizens to get their constitutional given right to obtain a firearm permit. The question is, Does this include the people who get a quick pass to get their permit because they were a friend of someone influential. Does it include Body gaurds of movie stars and others i can't think of at the moment who got carry permits in New York , Massachusetts and California, when the average everyday legal citizen could not get a firearm permit. Pay close attention and see if they do. Please pass this message on to others.
Bought a new Kel-Tec PMR30. It blew up in my hands due to a manufature fault. They new of this problem and still did not send out a recall or warning to owners. Took me months to get my money back from them. Kel-Tec is synonymous for "JUNK".
Keltec has a lifetime warranty and why is that you ask? Because your going to need it. My pistol was sent back 4 times the 1st 3 times replaced this and that. The 4th time keltec replaced the frame and added an 'A' to the serial number. Only used CCI MaxiMags. Loaded with I Israeli Uplula and tapped the back after every 5th round. One failure was a massive case rupture. With the new frame 2 jams out of 250 rounds. I enjoy shooting 22mag I just purchased the Walther Wmp at 540.00 full retail worth every dime. 400 rounds 1 Jam the first magazine. Perfect since. My local gun shop/range does not stock ANY Keltec because customers come back bitching about problems. Buy the Walther WMP. Thank you!
It's crap, only gun I regret buying. Most powder is not burned of the 22mag. The entrance and exit hole in my hydrostatic shock tests are the same diameter. No shock. Neat? Sure.. crap? Definitely
Yeah......uhhhhh....Because Glocks and other polymers only last a year, and are poor quality. Lmao. I remember back in the 80s my dad raving about how that "new fuel injection crap" will never beat his Holly carb, and is just a phase that will never work.
Хобби
I bought one and have had no issues. I use the recommended ammo and clean after each use. I love this gun!
Thanks!!! This is the best review I have seen since my purchase. Well spoken, well formatted, step by step, excellently presented information.
I searched for videos on this particular pistol and didn't find this one. Today, randomly, it showed up on the YT "homepage". Good review, thanks.
I had a few light strikes when I first got my pmr. I slightly modified the firing pin to allow another 2 thou of protrusion. Has ran great for thousands of rounds since.
Can you give me some more information?
WAS recently at the range with my new PMR 30. The only thing that was done prior to shooting was thoroughly cleaning the gun and lubing it. I shot 600 rounds using 4 magazines & various ammo types of different manufacturers. I loaded four magazines with the ludex speedloader and did not condition the ammo during the loading process as per kel-tecs recommendation. The only pause in shooting came from either loading another mag or stopping to reload all the mags which took a bit of time. I had a total of five failures: 4 failed to eject and a single failed to feed for a whopping 0.0083 percent failure rate. YES I'M VERY SATISFIED WITH THE PERFORMANCE OF THIS 22 MAG SEMI AUTO.
I bought mine 7 years ago and love it
Another great video as usual !!! Thank you 😊
I just got mine last week,brought it home took it apart oiled it and the mags and it ran flawless. Very accurate I’m glad I bought it and it’s American made. CMR 30 is next on my list
I love the look of the gun very blade runner Sci fi esque
22 mag is very much capable of self-defense and some more.
If it fires
Sure is better than nothing.
I now have 5 22/22mag handguns and I'm just tired of hearing the word "PLINKER"! First of all I have Not and Never Will call my PMR30 a Plinker but I will call it an Awesome, self defense weapon! I will never enter into a Pointless Debate with those who believe that anything below a 9mm, is not considered a Viable Carry gun! Having said this, I can go back in History and prove my point But I won't waste my time because I'm 79 years old and I'm ready for my Nap! Good Luck All!
5.7 and 22wmr have the exact same pressures and ballistics. Best part is 22wmr is ⅓ the cost and has hunting, target and self defense loads compared to 5.7 that just has high speed $2 a bullet price point.
I have both the PMR30 and CMR30 with 2000 rounds through PMR and 1000 rounds through CMR. Only issue I had was caused by a cracked magazine which failed to feed last round. As to ammo I found 36 Grain VMAX rounds have a tendency to keyhole in my PMR and I have read this is related to early models with fluted barrel. CMR does not have this problem and handles all grain weights without a problem.
These things are fun! Great video. The only downside on these is the mags. Rimlock central.
These are very hit and miss mine I just bought runs super well but I've seen some that are a pain in the ass. Also they make an all in one kit that is awsome
Light tubes may fall out of the sights in first few rounds. Firing pin can break before 500 rounds. Buffer pad will be done before 1000 rounds.... and it's ammo sensitive. But, it's a thrill to shoot!!!!!
Get the uplula loader specifically for those mags and don't forget the rifle that uses the same mags, the CMR-30!!!
Thanks! Love mine! what holster are y'all using? I want carry mine when I'm in the woods.
I love mine!!! I know I've heard people talk crap about the grip size, and how its too big front to back, but the same people purchase a Ruger 5.7 pistol and rant and rave about it. The Ruger is the same size, so I'm sure snobbery has something to do with it.
I got 2 of them my daughter & I both love them and relibel package.
I just brought my pmr 30 out the closet when I first got it I thought it was a little toy it stayed in my tackle box but now I see it's a good round to back me up when I'm hunting too. Deadly with squirrels,rabbits and to finish off deer I'm thinking of getting another one soon. It's a dang shame that it's so flimsy I keep feeling like I'm gonna break it 😂. And I need a holster for it any good ideas
Thanks for your review. I have a PMR30 on order.
what are your thoughts? price?
@@blainesteeves9 I think it's a fantastic value. I love having a high capacity 22 WMR pistol
I know we here for the pew pew a bit bros skincare routine is immaculate.
But over all I love this gun. Like it better than my smith 9mm
never one a round that didn’t go off it’s been pretty reliable for me and for any ammo I put in it
I got one good video sir
🤔 What I wanna know is -Where did you get that shirt? I want one 🤷🏽♂️ and thanks for the this straight forward review 👍🏽
You have to be in tight with the boogaloo boys.
Looks pretty cool, but I'm not a Keltec fan.
Perfect gun. All the negatives are false. You ain’t doing it right
22 WMR is a bad a/ss round! Sending 30 rounds of this down the hallway will stop anybody. Mine likes all bullet weights... 30 grain, 35 grain, 40 grain, 45 grain, and 50!
I love the Kel-Tec Platform and I have two P17's and the CP33 which I love! I am debating about buying this gun and this is a great review that might convince me!
I love how anything not a .50 bmg is a "plinker"
I have a CMR and PMR 30, and will never buy another KelTec product. Going to trade both for a good quality AR rifle.
But you were smiling when firing. They're even sweeter with the MCarbo upgrades if you want to put another $250 in it. 22WMR x even 25 rounds is a self defense weapon in close range. Little fire breathers.
I have a speed loader
But the loading tool.
I am guessing you meant the easy loader. KELTEC sells them, they work great.
I THOUGHT U WEREN'T SUPPOSED TO DRY FIRE THE PMR30???
Y
Great video. Too bad California won't allow scary things
I sent you $1,000 to your Zimbabwe account
Had my new PMR30 blow up in my hands. Company said they knew of the defect but did no recall. Took months to get my money back from the company. Keltec is synonymous for "JUNK" .
New Yorks New firearm permit scheme.
How long before other anti firearm states try the same thing.
New York is requiring citizens who want a firearm permit, or renewing a permit to attend a class, qualify with a firearm, submit personal information from social media, relatives. Present and past spouses, psychological evaluation,
Then you have to go before a judge.
Next you have to go before the officer who signs and gives you the firearm permit.
None of the programs mentioned above are in place, and who knows how long before lt begins.
Just another tactic to delay, or in the long run make it harder or impossible for citizens to get their constitutional given right to obtain a firearm permit.
The question is, Does this include the people who get a quick pass to get their permit because they were a friend of someone influential.
Does it include Body gaurds of movie stars and others i can't think of at the moment who got carry permits in New York , Massachusetts and California, when the average everyday legal citizen could not get a firearm permit.
Pay close attention and see if they do.
Please pass this message on to others.
Only problem with it is ammo price. It cost as much as 9mm.
Plinker huh? Some guys deer hunt with 22wmr.
And hog hunt 🐗
Great Video, Sir
Thanks .
Masonry Plus
Florida DeSantis Strong
Bought a new Kel-Tec PMR30. It blew up in my hands due to a manufature fault. They new of this problem and still did not send out a recall or warning to owners. Took me months to get my money back from them. Kel-Tec is synonymous for "JUNK".
I don’t know what your talking about mine has been no issue, use proper Ammo and it’s going 3 years strong now
"They 'new' of this problem?'" All credibility lost!
he lubed it up and filled it with 9mm
Keltec has a lifetime warranty and why is that you ask? Because your going to need it. My pistol was sent back 4 times the 1st 3 times replaced this and that. The 4th time keltec replaced the frame and added an 'A' to the serial number. Only used CCI MaxiMags. Loaded with I Israeli Uplula and tapped the back after every 5th round. One failure was a massive case rupture. With the new frame 2 jams out of 250 rounds. I enjoy shooting 22mag I just purchased the Walther Wmp at 540.00 full retail worth every dime. 400 rounds 1 Jam the first magazine. Perfect since. My local gun shop/range does not stock ANY Keltec because customers come back bitching about problems. Buy the Walther WMP.
Thank you!
Only got your money back??🤔🤨
"Blew up in hand"
Should have asked for more than just money back. 😆
God No!!!
45 feet? Really? Lol u sure
It's crap, only gun I regret buying. Most powder is not burned of the 22mag. The entrance and exit hole in my hydrostatic shock tests are the same diameter. No shock.
Neat? Sure.. crap? Definitely
Ahh its beyond a range gun...and casings 45ft away..hahaa...that soumds a little far fetched
Shit plastic guns. All metal if you want a premium gun that will last for generations.
This is not a SW52-2. It’s a 30 round rimfire pistol, made for range shooting and fun. Of course, even the sw52-1 had problems loading ammo.
Some people don't get to live Generations! This is a great gun for this Generation to have fun with and will give you years of pleasure!
Yeah......uhhhhh....Because Glocks and other polymers only last a year, and are poor quality. Lmao.
I remember back in the 80s my dad raving about how that "new fuel injection crap" will never beat his Holly carb, and is just a phase that will never work.
Never knew kel tec made a normal looking gun