TORQ Locker Subaru VA2 & Wilderness Detailed Install Video
HTML-код
- Опубликовано: 7 июн 2023
- Check out our TORQ Locker Subaru VA2 & Wilderness Detailed Install Video. We will walk you through all the steps to install a TORQ Locker into a VA2 and Wilderness rear differential.
Авто/Мото
Great video, humbled me into knowing that it's an upgrade I don't have the means to do myself before I tried lol 😅
Nice 🤘🤘
Thanks Guys!
Great video! Wondering do you guys do installs?
@calfolkionized we do not do installs at our shop, but any 4x4 shop should be able to install our style of locker.
I have your locker in my Forester Sport its great off road and good om road.
just a comment you may have to use the Subaru tool to open the axiales.
Thanks a lot for this video.
Thanks for sharing! Here is our install video showing how to open up a 1 Bolt Subaru differential without the Subaru tool. ruclips.net/video/sVIpCBFyMdQ/видео.html
I agree. No matter how much tapping I did, it wouldn’t budge.
I was looking to add this to my 06 WRX. Instead of a LSD. I understand it's noisy, but not really worried about that. My biggest concern is street driveability. This car is a daily
Most of the 06 WRX's have a viscous limited slip rear differential - our lockers won't work with that case. You would need to swap in a used 5 Bolt style R-160 with matching gear ratio to run our locker. Our lockers are designed for on and off road use, most of our customers install in daily drivers.
I have a 2012 Forester; my instructions did not say to use the red thread locker; did I screw this up somehow?
In the video we show best practices, it's ok if you didn't use thread locker, as long as your torqued the ring gear bolts properly.
Like the product do you hear the clicking when daily tarmac driving?
Any audible clicking varies by vehicle. Our Wilderness is nearly silent. TORQ Lockers in Subaru's are generally very quiet.
@@TorqMastersIndustries done. 👍👍
Whats the torque spec on the ring gear 17mm bolts
Needs to be angle torqued.
how much would it cost me if i have it install by someone else ?
Depending on the condition of the vehicle and any corrosion, install on a Subaru should take about 2 to 3 hours. Any 4x4 shop should be able to install the locker.
What's the average cost to have someone do this for you?
The average time is 2.5 to 3 hours for install - so times that by your local shop rate
Where are you located sir.
Western NY
I’m assuming this may affect your stability control system or antilock brakes or traction control especially if the vehicle is equipped with brake actuated limited slip I could be totally wrong just figured I’d ask the question
No, the locker does not affect any of these systems. There is never a rear slipping wheel, so none of these systems engage regarding the rear driveline.
@@tractiontogoanywhere660 - thanks for the reply, this was my question as well.