Great video! Any tips on how to get a clean cut off the bevel skive? I get inconsitent tears and waves especially with softer leathers on my bell skiver.
Shouldn’t need to if you let the glue fully set before folding the leather over, and make sure you crease the edge as that will also help fix it in place. If you’re worried about it coming apart you can absolutely always through a line of stitches in it. Just be careful not to pull the thread too tight as the leather is super thin and can rip if you stitch it too tightly
Great video! I'm working on getting better at these. How do you feel about double-sided tape for the adhesive contact? It's what I'm using right now only because i wanted to minimize any mess, but the masking tape barrier looked interesting. Also will a roller work just as well on the sealing the back?
Great video Will 👍 One clarifying question: when you say beveled skive, do you mean that is slopes down to 2mm or is it like a cliff where it drops down. Hand skiver over here 😬
Bevel is a term that is used to denote a flat edge at an angle to the original. Think knife blade. The sharp cutting edge is beveled (on one side for Japanese, otherwise both sides) and the bevels join to create the sharp edge. He’s suggesting making the bevel taper from full thickness to 0.2mm at the edge of the leather.
Earlier this year i made a leather jacket our of chrometanned, aniline calfskin, and i also turned the edges. I didnt skive it because the leather was thin (1.0-1.2mm). But after a very short time, the leather began to tear on some parts of the edges. Is there any way to prevent this? i dont have a skiving machine tho.
Thanks for watching, I purchase my filetuse from proatelierplus.com if you’re in the UK. If you’re in the US, I’d recommend www.amblardleatheratelier.com/collections/tools
@@WillHodges Blimey. Not cheap, eh? I’m a Yorkshire lass, I had to go have a lie down! Might have to Cary on with my sub £10 wooden creaser for the time being. Thanks
Now this is how to create art in leatherwork! Excited to try this now. Thanks Will!
Great tutorial. I know how difficult it is to make such great content. Nice work.
Your work is so beautiful, I always wondered how these clean edges were done, happy to subscribe to your channel, thank you for sharing!
Very cool 🤓 Thank you. Can't wait to try this. Hello from Nova Scotia 🐿️
This Helped a lot! Looked great, and I’ll be using this🤘
I just discovered your videos. A lot of very good tips and tricks. If enough time tonight, I will see most of them. Thanks for shearing :)
Very nice work, thank you for taking the time to make videos
Thank you for such an excellent video!
Great video! Any tips on how to get a clean cut off the bevel skive? I get inconsitent tears and waves especially with softer leathers on my bell skiver.
nice video, do you need to stitch it to prevent it from coming apart if it's on a moving/bending area?
Shouldn’t need to if you let the glue fully set before folding the leather over, and make sure you crease the edge as that will also help fix it in place. If you’re worried about it coming apart you can absolutely always through a line of stitches in it. Just be careful not to pull the thread too tight as the leather is super thin and can rip if you stitch it too tightly
Your awesome Will!! Thank you so much for sharing your knowledge!!!
You’re more than welcome, thank you so much for your support
Very beautiful video!
Thank you
Great tutorial! Thanks
Why not using a ruler 1/2 with of glue allocated part to bend faster
Thanks for sharing !
Great video! I'm working on getting better at these. How do you feel about double-sided tape for the adhesive contact? It's what I'm using right now only because i wanted to minimize any mess, but the masking tape barrier looked interesting. Also will a roller work just as well on the sealing the back?
Great video Will 👍
One clarifying question: when you say beveled skive, do you mean that is slopes down to 2mm or is it like a cliff where it drops down. Hand skiver over here 😬
Bevel is a term that is used to denote a flat edge at an angle to the original. Think knife blade. The sharp cutting edge is beveled (on one side for Japanese, otherwise both sides) and the bevels join to create the sharp edge.
He’s suggesting making the bevel taper from full thickness to 0.2mm at the edge of the leather.
Whats the name of that glue? Thanks great video.
Intercom Ecostick 1816b
@@WillHodges Thank you so much,this is what i need as Barge is too strong
Earlier this year i made a leather jacket our of chrometanned, aniline calfskin, and i also turned the edges. I didnt skive it because the leather was thin (1.0-1.2mm).
But after a very short time, the leather began to tear on some parts of the edges. Is there any way to prevent this? i dont have a skiving machine tho.
Thank you so much!
More than welcome Nina
فكرة رائعة
Well done 👍✅
Thanks!
❤
Спасибо, бро! Привет из России!)
Thanks. Do you know if the non electric creaeser is any good? I mean the type that has two claws with a screw to set the distance and a wooden handle.
No worries, yeah a screw crease (the tripe Ruth the two claws) will work you’ll just have to be a little careful
Very nice
Thanks Mike
Is this regular wood glue?
Thanks for the video, Will. Very comprehensively explained.
Where’s a good source to get a fileteuse (sp?) from?
Thanks for watching, I purchase my filetuse from proatelierplus.com if you’re in the UK. If you’re in the US, I’d recommend www.amblardleatheratelier.com/collections/tools
@@WillHodges Blimey. Not cheap, eh? I’m a Yorkshire lass, I had to go have a lie down!
Might have to Cary on with my sub £10 wooden creaser for the time being. Thanks
@@KateMondor no problem, If you’d like me to do a video tutorial on techniques for manual dressers let me know
Nice❤
Thank you!
Do you know the name of the song?👍
How do you turn a edge on a curve
A little more complicated than I can explain here but keep your eyes out for a future video coming very soon
❤