Replacing passenger side Axle on 2010 Nissan Murano AWD
HTML-код
- Опубликовано: 20 авг 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#nissan #murano #muranopassangersideaxle #frontaxle #nissanmuranoaxle #nissanmuranoawdaxle #rfaxle #howtoreplacefrontaxleonnissanmurnao #2010muranoawdaxle #2011muranoawdaxle #2012muranoawdaxle #2013muranoawdaxle #nissanmuranofrontaxle #awd #awdaxle #longaxle
Pretty sure that rubber grommet/bumper on the front shaft is just a bump-stop, to keep the bottom of the strut from hitting the axel on a hard impact, but it actually just adds a half inch to the diameter of the axel in that spot, making a bump more likely, so I think aftermarket guys said F it to them. You can get universal bump stops for CVs if you feel you need it though 🤘
Great work and very ez to follow the steps. Praying your health returns 100%. Be well…thanks for sharing!
Thank you!!! I’m much better but it going back and forth on the pain
Are you still making videos? I saw your other video about your health issues. I hope you are doing better. I really enjoy your videos. I am slowly learning how to do stuff my own I have a 2017 Buick encore. Someone tried to take my Cadillac converter and it severely messed up my car. For some reason 3 of my tire sensors all went out. $110 each to replace at mechanic shop. I can’t pay that much so I just have to pray that my tires are OK. I never knew those went out. I just find it odd that all three of them went out. I went to fix one and right after I drove out of t the mechanic shop I noticed now the other sensor wasn’t working. I called the guy back and he said well it’s not really an issue unless it bothers you. 🤦🏼♀️
Yes sensors in tires r not a big deal they r useless they cause failed light when winter and summer come anways yes they run about $115 each. And yeah I’m still making videos I’m recovering and going to doctor 2 times a week and doing less and light work
Wait bro isn’t the long cv axle for front wheel drive?? I have a 2010 sl awd and passenger side is the short head or am I wrong on that? Its what all searches show when buying awd?
Passanger is long drive is short FWD
@@RBTheMechanic interesting so I took my 2010 Murano awd sl the passanger side do axle and it was a short head installed the boot had torn up and leaked, but the thing is I was searching for the part on Amazon and it keeps showing me that the short headed on is the front passanger side? Could the previous person on the car installed the wrong cv axle on the car? Because if you are saying the car you did was 2010 awd same as mine I took it off and it’s deff the short head one that was installed and the “new” one I still can’t get it to fit I tried many tricks for “cv axle” your grease held the ring well but still nothing. So had me do more research and saw you had this video and your cv axle is with a long insert head I appreciate your feedback bro!
@@RBTheMechanic also wanted to know why did you install the long?? If the Murano you said is awd? Wouldn’t that be the wrong part for the awd?
@@Aesthetics622 idk if I said awd or if it’s awd but as u can see part is long and long takes longs place
@@RBTheMechanic Okay, i believe the car you are working on here is FWD for sure. Because i just double checked with Nissan part numbers, and FWD is long on passenger and AWD is short length passenger. But i appreciate your knowledge my friend your videos always provide so much help, specially when i did the belt tensioner last night to take it out from the power steering wheel hole. Cheers keep up the great work!
need you do change the same axel on a 2016 civic
I will if I get one of those to come in for a job
@@RBTheMechanic where are you located!? Maybe I can bring mine in!
Did u grease the splines before pushing in to the CVT?
Did it have a c clip on the replacement?
No grease yes it has the c clip
So pro mr rb , this is not ez job
Yeah
@@RBTheMechanic the one u bought for cutomer is. Oem or after market . Oem. I check is 400$ alxe my toyota. After market 100$. , Labor around 200$. Is it. Fair price?
Do u need wheel alignment?
@@billwTCan I would get but it dosent disturb the toes