How to Fix Samsung Washer Dryer Washing Machine Drying Issues or Faults

Поделиться
HTML-код
  • Опубликовано: 28 окт 2024

Комментарии • 35

  • @AnnaSitek
    @AnnaSitek Год назад +2

    You're the best! I bought my washer dryer combo five years ago and it never dried my clothes well. After watching your video I decided to try - and I've just taken out nicely dry and warm clothes. It helps a lot to have working dryer when you're working single mother :-) Thank you, thank you thank you!
    All the best from Poland!

    • @askmrwashywashy
      @askmrwashywashy  Год назад

      You're so welcome glad you worked it out and it helped

  • @Luke-gk8lg
    @Luke-gk8lg Месяц назад

    Thank you, flicking the switch helped get my dryer working again!

  • @abshahid284
    @abshahid284 3 года назад +3

    Extremely helpful thank you for your hard work

  • @lucylooandtegantoo
    @lucylooandtegantoo 3 года назад +1

    Thank you for your video. Really helpful. I'm going to have a go!

    • @askmrwashywashy
      @askmrwashywashy  3 года назад

      Welcome. Give it a go and let me know how you go.

    • @lucylooandtegantoo
      @lucylooandtegantoo 3 года назад

      @@askmrwashywashy it was that little teeny tiny button and some lint build up. Thanks for the video. Saved me a fortune to get an engineer out 😁⭐

    • @askmrwashywashy
      @askmrwashywashy  3 года назад +1

      @@lucylooandtegantoo Awesome glad I could help out

  • @EndyMX
    @EndyMX 2 года назад

    Hello! This video is great. I have a similar model and my drying issue is that it takes longer to dry than before and when it does "end" and you open it, vapor comes out. Like it's not being able to remove the evaporated water. I checked for lint clogs in the back tube but nothing seems clogged there. Any ideas?

    • @EndyMX
      @EndyMX 2 года назад

      What are the tubes at the bottom for? Could those be clogged?

    • @askmrwashywashy
      @askmrwashywashy  2 года назад

      Hi there. The problem is water is constantly being injected into the washer. Disconnect the cold water valve that is connected to the dryer. It has a black pipe going to the plastic tube behind the dryer

    • @EndyMX
      @EndyMX 2 года назад

      @@askmrwashywashy Thanks. I'll try that. But isn't that necessary for washing? My model is WD15F5K5ASG/AX.

  • @Deephe4t
    @Deephe4t 3 года назад +1

    Quality video! many thanks

  • @baihaqiabdulghani8502
    @baihaqiabdulghani8502 9 месяцев назад

    i have samsung wr24m9940kv. my problem is showing HOT on display panel even im not running it for a day.

  • @Salomea369
    @Salomea369 4 месяца назад

    I have info on my washer dryer screen “ clean the filter” but filter is clean.Ive done washing was ok then put for drying and washer started beeping to clean the filter so I’m so stuck now 😭

  • @4kHDR.DAQUAN
    @4kHDR.DAQUAN 2 года назад

    The white button has been pressed, but the measured resistance number is still 0 ohms. I heated it with hot air, and the resistance value of the thermistor has not changed. It is still 0 ohms. I think it can be damaged. It should be disconnected and connected. the role of pass,

  • @YARDMANMX
    @YARDMANMX 2 года назад

    I just bought a used one in very nice condition it works well at times but it has some issues like is has smell ,it does not take the liquid soap and softener automatic and every now and then error messages C4 ,C5 and recently HC and it does not dry the clothe properly
    i often pause and stop or check drainage or water supply but i think it need service the previous owner had it for four years

    • @askmrwashywashy
      @askmrwashywashy  2 года назад

      Hi . The auto soap dispenser has to be cleaned as it clogs up after a few years especially if you leave it on there too long. You can remove it and clean it by. Opening the drawer and press a tab usually in the middle while pulling out the drawer

    • @askmrwashywashy
      @askmrwashywashy  2 года назад

      You need to cleaning the condensation/drying chamber too

  • @carlvinjosephs4774
    @carlvinjosephs4774 Год назад

    My Samsung WD870 washer dryer started tripping the breaker when it was put on to wash.

  • @elgranreset3344
    @elgranreset3344 3 года назад

    Hello please maybe you can helpme with an issue, y have a similar combo machine (washer dryer) if i set only washing cycles works flawless, but if i set on drying cycle starts ok but when is spraying cold water on the condenser never stops till 5E (overfill with water) jumps... washing cycle as i say allways finishes and drain perfect... but driying is a mess.

    • @askmrwashywashy
      @askmrwashywashy  3 года назад +1

      Hi I think the water inlet valve for the drying part is faulty you need to replace that. If you open the top lid you will see it is the one with a pipe going into the dryer part of the washer or you can feel to see which one is putting water in constantly

    • @elgranreset3344
      @elgranreset3344 3 года назад

      @@askmrwashywashy thank you, i replace the whole valve set, has 3 inlets... the problem remains, i disassembly and clean all the machine, hoses, presure valve, passages, rubers etc. Thermostats i dont know if i have set it right does´nt seem to be OEM but rates 125 ºC.
      Im clueless-...

    • @askmrwashywashy
      @askmrwashywashy  3 года назад

      @@elgranreset3344 Hi what is your model number ?

    • @elgranreset3344
      @elgranreset3344 3 года назад

      @@askmrwashywashy its a WD0894W8N

    • @askmrwashywashy
      @askmrwashywashy  3 года назад

      @@elgranreset3344 thanks for that.Try to remove the electrical connector to the valve that goes to the condensor. Run a dry cycle and see how that goes. If that works might be a faulty board that is not shutting off that valve

  • @s20tya
    @s20tya 11 месяцев назад

    My Samsung washer dryer stops in the drying cycle 15 minutes into the cycle, any idea? No heat at all

    • @askmrwashywashy
      @askmrwashywashy  11 месяцев назад

      Hi stops as in done with drying ? Or error code comes up? Might need to clean some sensors in the dryer part

  • @fablan3308
    @fablan3308 3 года назад

    Is there a lint filter on that machine you are dead do that you would void the warranty
    Would you

    • @askmrwashywashy
      @askmrwashywashy  3 года назад

      no lint filter and yes opening it yourself would void the warranty

  • @fablan3308
    @fablan3308 3 года назад

    I have one of these and I have a bad burning smell coming from it sometimes

    • @askmrwashywashy
      @askmrwashywashy  3 года назад

      you need to check lint build up in the dryer part and also check your power plug on the wall socket

  • @zmzmzn2000
    @zmzmzn2000 3 года назад

    Samsung should stick to TV's, their washers and dryers their washer and
    dryers are terrible they are VERY SLOW they use VERY MUCH energy and are
    not efficient at all, stay away from their washers and dryers you'll be
    glad you did.