You are a life save on the Preview options was so frustrated, bit knowing how to select program preview. Your video enabled me to change that and do a few things on the Atem Mini Pro ISO. Thank you so much.
I am an audio guy, big time. But I am a video noob and have been forced into the video game with COVID. I got the ATEM Mini and then had to learn how to use it. I have watched this particular video about 3 times but after the third time the light bulb went off and it all just stuck and I now have it "locked and loaded." That tells me that Joseph's tutorial was excellent and I just needed to catch up! Well done and thank you!
Finally!! As primarily a live event tech, who often is running a switcher, with graphics/video sources and camera ops, at a distance. I have been trying to find out about the possible preview abilities of this unit ever since it was released! Felt like I was trying to find the Grail! Concise, Clear and Comprehensive... Thank-you so much 👍😁
Very helpful video! One thing I might add is that in order to get into the ATEM setup settings, you must be connected via USB. Those settings will be greyed out if you're just connected over ethernet. But if you access them with USB, you can then go in there and enable the settings to also be available over ethernet.
I had the solution of my problems in 9:12. Thans!!! Your videos is the one on the internet thar have how to solv this problem with the green button!! Thans again!!!
Thank you Joseph, that was a perfect explanation! We're pretty sure it will work for our needs. Fingers crossed for Multi-View at some point. (if at all possible)
5:31 My use case of direct inputs. When I record my gaming i use hdmi 1 for game hdmi 2 for camera, hdmi 3 and four are connected to the pc, one used as an chat preview, one used as web browser preview. And now i can change my monitor to chat, web, preview monitor and multicam (i have a pro version, but you can do it on streamdeck or whatever)
Mannn got so excited with the first review. While no multi-view in not necessarily a deal breaker it is a feature you normally expect switchers o have. Hope they do add it in a future update.
I think given the price, it's unlikely they will add it (even if the hardware can handle it). It'd destroy their $1,000 switcher market. I think it's pretty legit NOT to have it at this price point, considering the target market (people making self-produced shows).
Thank you for all the great information! I am currently helping my church set up a live stream system due to Covid 19 and we just ordered the Atem Mini. I can't wait to start playing with it when it gets here.
Absolutely loved this. Seriously looking into ATEM Mini and learning all I can to make an educated decision as to if I should buy it, and this video was clear, really well produced, concise and to the point. Many thanks!
Just cancelled my B&H order since its been on backorder for weeks. Ordered from DVE through your link. They say it's available so I have my fingers crossed it will come soon!
Thks for the amazing tutorial , How did you connect your gopro to Atem mini. ? with a capture card or direct from your gopro mini hdmi out to hdmi input ?
Really nice and clear explanation, thanks so much! I am so used to having Multi-view with Vmix and a Decklink Duo that I'm not sure I can live without it.
Yeah once you're used to that it's tough to go without. But remember that this device is really designed for, I'd say, self-broadcasts. No producer, no one doing the switching for you.
PhotoJoseph Yeah, it’s definitely very powerful for the money. Just did a 24 hour live stream using a Roland V-60, and it was fantastic but overpowered for a 3 camera simple show. I wish there was a way to get the Mini for a day of testing before purchasing. Might just take the shot since it is so affordable.
Given the price, it's an easy buy. And you can always return it if it really doesn't work out. I think that DVEStore still has them in stock, if no one else does: geni.us/ATEMmini
The ATEM Mini ISO and Mini Pro both have Multiview, but I can see the regular ATEM Mini does not. Another interesting thing to note, on the Mini Pro and Mini ISO, you can press and hold the PGM button to enable Preview Out on the HDMI output.
GREAT VIDEO, The best I've seen. Perhaps you could shoot a vid on this because there are a lot of us out there: How to use Aten Mini to broadcast PowerPoint over zoom with Picture in Picture of presenter on / beside the slide. At the moment I just use OBS to set up scenes and send the composite video over to Zoom through OBS virtual cam. Perhaps this is the best way and Aten is overkill, or perhaps Aten is a better way.... I don't know. One thing for sure I don't want to clutter my desk with multiple pcs. Ideally I'd like to do everything off my laptop (Zoom, PowerPoint) and maybe just get a small external monitor for previewing the Aten. I'd love to know the best way to do this as a regular Zoom Presenter.
@@photojoseph Because screensharing in Zoom reduces the presenter to a small square in the upper right corner. I've been using OBS to create a PiP with me on a greenscreen transparent beside the slide. That may still be the best way to go... Thanks
Incredibly well explained! Great job responding to that issue. BM should link to this video. A bit of extra work since you need to jump through a lot of hoops to enable pvw/pgm and you need a second monitor but it's definitely capable as you showed. Well done.
This is my first time seeing your channel, I have subscribed after watching this video on atem mini, this is the best video on this product I have watched on RUclips. Great video. I hope other videos on your channel will be great as this one. I gonna check them out!
Thanks I am looking for something to get rid of the awful second delay on my Extron 1608, I think I have found my golden ticket. Thanks. I am going to pull the camera imputs going into the extron into the mini the use one output the mini back to the extron.
Dude thank you for the awesome video. I didn’t think you could preview on this device which put me off. Multi view would be nice but at least I can preview a shot before pushing it live. This feature alone has made me want to buy this again. Thank you
Thank you. This video was very helpful as I had the problem of not being able to switch between preview and program from the device. Could only do it from the laptop/software.
Great information on the device. Do you have a video demonstrating Picture in Picture and how to increase the size of it? Thanks for the videos you have up. I’ve already learned much.
Appreciate your expertise and your complete explanations.. way more useful than many other posts that just discuss features, etc. Guess that “real world” experience really has value ;-)
the atems are based on xilinx zinq fpgas, there may not be enough hardware resources in the particular chip used to add the multiview feature. the format adaptation feature on each input may use up all those resources.
These are excellent videos thanks. My ATEM Mini arrives tomorrow. I have a number of cameras but note that you said that you had linked your GoPro - was that directly plugged into the HDMI port on the ATEM Mini pls?
Mine is still on back order. I have a preorder everywhere lol. I want this thing so bad. Great video man. Thanks for the info. Because of your videos I think the Mini is enough for my needs the pro would be nice but not needed. Would love to see the preview in a update.
Thanks for the great tutorials, the complete tour that you did was great! I do have one question that I can't seem to find an answer for (so the answer is probably no). Can you utilize the preview mode in OBS through the ATEM mini or do you need to feed the preview through the HDMI? Thanks for your time!
Great information. Next time please slow down. I was trying to keep up. However, this was awesome. I am trying to get mine set up very soon for my math classes. I just bought the mini. I am new to it all.
ATEM software doesn’t show video, so, no. In OBS, the only way to get preview would be to set the HDMI to Preview (as is shown in this video), and then feed that into the computer via an HDMI to USB adapter.
Thank Joseph, this is exactly what I was looking for! Very well explained :) I'm in the process of configuring my ATEM mini and got stuck on how to setup preview on the device itself and leave the USB C for webcam output only. It's going to be important not to combine streaming and software control on the same computer via USB. If I do need the software control then I connect an alternate computer via the network. Multiview would be cool for what I need but not essential.
The HDMI Output on my ATEM MINI doesn't work as it should. In the ATEM Software Control, the 'Camera 1 Direct' option works, but none of the others do. I'd like to have the HDMI output as 'Preview' mode, so I can see the camera I am about to switch to. Have tried every available combination of different cameras, different HDMI cables, have tried two different output screens(projector and computer monitor), even tried putting a powered HDMI splitter between the HDMI Output and the screens. I saw on the BM forum that others have experienced this too, but I didn't see a fix - surely they have sorted this out!?! The ATEM Mini Firmware is at 8.6.1 It is the original, most basic ATEM Mini Any ideas would be greatly appreciated, thankyou.
Try a reset of the hardware. Put it in recovery mode by holding down the upper left “ON” button while connecting to power. That puts it into a state where a firmware update is required. Make sure you have latest firmware installed first (you don’t now).
thank you very much. Although I am watching this after 4 years, there is till a lot to learn from this video. Please is there anyway to preview using the Atem software. i.e show the preview on your Macbook?
Thanks for watching. There’s a couple ways you could get the ATEM video on your computer screen. If you are controlling the ATEM over the network, then you can use the USB output to connect to a WebCam software or OBS. That will show you the program. However, if you want the preview or the multiview, then the only way to do that is to use one of the AGEM HDMI outputs and run that into a HDMI to USB converter and then into your computer and again use OBS or something like that to see it.
Thank you for this. that output select on the top menu is just so dumb. Why is that not an option in the software control? Drove me crazy for 2 days and didn't know what was wrong.
You have to understand that this is a miniature version of a much, much bigger product. Sometimes those menus that don't make sense at this scale are a lot more logical when it's bigger. My big ATEM has four of those outputs and it's incredible to be able to separately determine what goes through them.
One question: is "program" always fed though the USB-C? There's no indication but I assume that is the case. It's only the HDMI that can switch between "program" and "preview". Good video!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
You are a great instructor. Thank you!
Thank you Curtis. That means a lot coming from you!
So are you Curtis.
Curtis Judd agreed ! 👏🏻👏🏻👏🏻
@@Vidyograf You too are!
@Curtis Judd
Now THAT is a complement, coming from another great instructor...
Finally found this video that describes the ATEM mini functionality in a comprehensive way.
Incredible good instructions! Thank you! I am brand new to ATEM Mini and just fund your video and all my problems gone!
Thank you! This switcher is crazy powerful. Your walkthrough is the perfect companion to it.
Thank you kindly for saying so!
You are a life save on the Preview options was so frustrated, bit knowing how to select program preview. Your video enabled me to change that and do a few things on the Atem Mini Pro ISO. Thank you so much.
after years using atem mini, i just know that atem mini also can do this. wow, thanks!
great tutorial! helping my church with live streaming and I am using the Atem mini with VMix program. hope I can work this with my setting. Thank you!
You're welcome, Erenia!
Simple explanation that was spot on, well done ❤
Uff, I though my little Atem Mini was not capable of preview, little did i know now I can!! 🙌🏻
Yes you can! 😃
This is an invaluable video! So well done, straight to the point, clearly planned and executed. Many thanks from this newbie!
Thank you 🙏🏻
I am an audio guy, big time. But I am a video noob and have been forced into the video game with COVID. I got the ATEM Mini and then had to learn how to use it. I have watched this particular video about 3 times but after the third time the light bulb went off and it all just stuck and I now have it "locked and loaded." That tells me that Joseph's tutorial was excellent and I just needed to catch up! Well done and thank you!
haha that's awesome. Yep, sometimes it takes a few, but I'm glad you got it in the end!
Finally!! As primarily a live event tech, who often is running a switcher, with graphics/video sources and camera ops, at a distance. I have been trying to find out about the possible preview abilities of this unit ever since it was released! Felt like I was trying to find the Grail! Concise, Clear and Comprehensive... Thank-you so much 👍😁
Very helpful video! One thing I might add is that in order to get into the ATEM setup settings, you must be connected via USB. Those settings will be greyed out if you're just connected over ethernet. But if you access them with USB, you can then go in there and enable the settings to also be available over ethernet.
I had the solution of my problems in 9:12. Thans!!! Your videos is the one on the internet thar have how to solv this problem with the green button!! Thans again!!!
Thank you. I use my ATEM MINI fog live streaming sports. Your videos are a big help.
Right on, I love hearing that!
Your videos are blowing me away! Thank you!! Pure awesomeness! I've learned so much. This was exactly what I needed.
Thank you, that’s kind of you to say
Thank you Joseph, that was a perfect explanation! We're pretty sure it will work for our needs. Fingers crossed for Multi-View at some point. (if at all possible)
Right on! Thanks, and thanks for watching!
Best Atem Mini tutorial I’ve seen. Thank you
Another very helpful video!
Hey you helpt me a lot with these video. Thank you very much!!! Aloha from Switzerland
What an outstanding video. One of the best RUclips tutorials I've ever seen. Really well done sir! 👍
Thank you kindly!
5:31 My use case of direct inputs. When I record my gaming i use hdmi 1 for game hdmi 2 for camera, hdmi 3 and four are connected to the pc, one used as an chat preview, one used as web browser preview. And now i can change my monitor to chat, web, preview monitor and multicam (i have a pro version, but you can do it on streamdeck or whatever)
Excellent video. Just about to get one of these for my church and you answered ALL of my questions.
Sweet! They are hard to find now, but I believe that the DVE Store has them in stock - try here geni.us/ATEMmini
Mannn got so excited with the first review. While no multi-view in not necessarily a deal breaker it is a feature you normally expect switchers o have. Hope they do add it in a future update.
I think given the price, it's unlikely they will add it (even if the hardware can handle it). It'd destroy their $1,000 switcher market. I think it's pretty legit NOT to have it at this price point, considering the target market (people making self-produced shows).
My ATEM Mini just shipped, so I am very excited to start using it. Great tutorial Joseph.
Awesome, and thanks!
This is the best clarification I've seen yet! Thanks!
Thanks!
Wow wow just the right video I needed
Thank you for all the great information! I am currently helping my church set up a live stream system due to Covid 19 and we just ordered the Atem Mini. I can't wait to start playing with it when it gets here.
Sweet! It'll work out great for you; I know this is being used a lot in churches.
Man, you are so good in explaining things, thanks a lot, you just conviced me to buy the device
awesome, thanks!
Thank you so much. This is a very helpful and easy to follow video. I just got the Atem Mini Pro and feel so lost here in the beginning.
Glad it was helpful! Be sure to watch the rest of them, too. Here's the playlist ruclips.net/p/PLRe8DcOhgslpIuaAUC7JqGLOQw2X44DFH
You are a life saver!! Thank you so much, this was exactly what I needed.
Absolutely loved this. Seriously looking into ATEM Mini and learning all I can to make an educated decision as to if I should buy it, and this video was clear, really well produced, concise and to the point. Many thanks!
Thank you! Be sure to catch all the others ATEM videos that I’ve done. Here’s a playlist: ruclips.net/p/PLRe8DcOhgslpIuaAUC7JqGLOQw2X44DFH
@@photojoseph Will definitely watch. Thanks for this! This is what RUclips education is all about 👌🙏
Just cancelled my B&H order since its been on backorder for weeks. Ordered from DVE through your link. They say it's available so I have my fingers crossed it will come soon!
Crazy good quality information! I love RUclips
Glad you enjoy it!
Excellent explanation. Clear, concise, and useful.
Thks for the amazing tutorial , How did you connect your gopro to Atem mini. ? with a capture card or direct from your gopro mini hdmi out to hdmi input ?
Just HDMI out of the GoPro. It was a little finicky and the delay is pretty bad, but it works. I wouldn't recommend it as a primary camera though.
@@photojoseph thk you
Great device This review contains the info that may help me to get one for my church, thanks!
Excellent, glad to help!
Thank you for yours tips they helped me a lot, great job and take care. :)
Glad to hear that!
It would be great if you would do a tutorial on using the Stream deck with the ATEM & OBS
That’s been on my list for a while. I’ve covered it in live events but never in a comprehensive video 🤔
Thank You for this! Cleared a lot of things and I am probably gonna buy the device now. :D
Really nice and clear explanation, thanks so much! I am so used to having Multi-view with Vmix and a Decklink Duo that I'm not sure I can live without it.
Yeah once you're used to that it's tough to go without. But remember that this device is really designed for, I'd say, self-broadcasts. No producer, no one doing the switching for you.
PhotoJoseph Yeah, it’s definitely very powerful for the money. Just did a 24 hour live stream using a Roland V-60, and it was fantastic but overpowered for a 3 camera simple show. I wish there was a way to get the Mini for a day of testing before purchasing. Might just take the shot since it is so affordable.
Given the price, it's an easy buy. And you can always return it if it really doesn't work out. I think that DVEStore still has them in stock, if no one else does: geni.us/ATEMmini
The ATEM Mini ISO and Mini Pro both have Multiview, but I can see the regular ATEM Mini does not. Another interesting thing to note, on the Mini Pro and Mini ISO, you can press and hold the PGM button to enable Preview Out on the HDMI output.
Can you make a video to explain please
Perfect! Nice explain and helpful tutorial. Thank you, Joseph.
very helpful, thanks a lot. Also for extreme iso 👍
Thanks, this was the feature I needed more info on. Just purchased the atem mini!
Sweet!
Awesome tutorial Joseph! Thank you very much!
My pleasure!
Hahahah Thank you Very Much this is the ATEM mini that im waiting Kudos !! To you Sir. I just checked out my order at amazon
You're welcome, and enjoy!
GREAT VIDEO, The best I've seen. Perhaps you could shoot a vid on this because there are a lot of us out there: How to use Aten Mini to broadcast PowerPoint over zoom with Picture in Picture of presenter on / beside the slide. At the moment I just use OBS to set up scenes and send the composite video over to Zoom through OBS virtual cam. Perhaps this is the best way and Aten is overkill, or perhaps Aten is a better way.... I don't know. One thing for sure I don't want to clutter my desk with multiple pcs. Ideally I'd like to do everything off my laptop (Zoom, PowerPoint) and maybe just get a small external monitor for previewing the Aten. I'd love to know the best way to do this as a regular Zoom Presenter.
If you’re using Zoom, why not just share your screen and put slides there? Use the tools Zoom has for presenting slides?
@@photojoseph Because screensharing in Zoom reduces the presenter to a small square in the upper right corner. I've been using OBS to create a PiP with me on a greenscreen transparent beside the slide. That may still be the best way to go... Thanks
@@HowardOlsen got it. I’m doing a live show tonight; I may try to demo it there.
@@photojoseph knock em alive!
@@HowardOlsen were you on the show? I covered this.
Awesome video. Been looking for this..thanks a lot.
Incredibly well explained! Great job responding to that issue. BM should link to this video. A bit of extra work since you need to jump through a lot of hoops to enable pvw/pgm and you need a second monitor but it's definitely capable as you showed. Well done.
Thanks!
This was what we needed. Very helpful and time saving.
Thanks!
This was wonderful, thanks for showing the process
You are so welcome!
This is my first time seeing your channel, I have subscribed after watching this video on atem mini, this is the best video on this product I have watched on RUclips. Great video. I hope other videos on your channel will be great as this one. I gonna check them out!
Thanks, I appreciate that! I have more of these coming on the ATEM Mini ;-)
Amazing stuff on your channel ! Thanks
Thank you!
Very clear presentation! Thanks for the definitions and examples.
thank you and you're welcome!
Really great video, man. Thank you. Keep up the good work
Thanks I am looking for something to get rid of the awful second delay on my Extron 1608, I think I have found my golden ticket. Thanks. I am going to pull the camera imputs going into the extron into the mini the use one output the mini back to the extron.
Now THAT'S a review! Great work! thanks
Thanks!
Wow like Curtis is right great your an amazing Instructor thank you :)
aw, thank you!
Thaks a lot, didn`t figured it out in months
This is an outstanding explanation of these features. Thank you!
Dude thank you for the awesome video. I didn’t think you could preview on this device which put me off. Multi view would be nice but at least I can preview a shot before pushing it live. This feature alone has made me want to buy this again. Thank you
Awesome to hear! DVE Store emailed me on Christmas Eve to say they got 50 more in stock… go get it! geni.us/ATEMmini
Thank you. This video was very helpful as I had the problem of not being able to switch between preview and program from the device. Could only do it from the laptop/software.
Awesome! Yeah it's kind of hidden… not sure why it's in the setup app and not the main app!
Saved/Made my day!! Thank you!
nice!
Very helpful and informative.Thank you for the video.
Thank you for your huge help. Google meet inverts screen and you are right people See screen properly only I See inverted picture in preview
Yeah, a lot of them do that. I wish they had a toggle to turn it off!
This was very helpful, thank you!
my pleasure!
This is a great tutorial. Thank you!!!
Great video it will help me. What was the small preview monitor you were using?
It's in the description
Solid video! Very helpful. Thank you!
Brilliant work! Thank you.
thanks!
Great information on the device. Do you have a video demonstrating Picture in Picture and how to increase the size of it? Thanks for the videos you have up. I’ve already learned much.
Tip #7 ruclips.net/p/PLRe8DcOhgslpSQkH8ycUW9xCmNg2I4b0y
Appreciate your expertise and your complete explanations.. way more useful than many other posts that just discuss features, etc. Guess that “real world” experience really has value ;-)
Hehe thank you, and yes, it does 😁
You are made to do this buddy!
the atems are based on xilinx zinq fpgas, there may not be enough hardware resources in the particular chip used to add the multiview feature. the format adaptation feature on each input may use up all those resources.
Fair enough. I’m trying to put together an hacked-up multiview solution for those who want to put in the effort and not spend the money ;-)
Yeah if you’re gonna go with that many adapters… just get a bigger ATEM or alternative. It’s silly to piecemeal this too much, I think.
@@photojoseph indeed, the atem tvs HD is pretty competitive at about $800
Nice
Thank you much needed info on the Item mini
You're welcome!
These are excellent videos thanks. My ATEM Mini arrives tomorrow. I have a number of cameras but note that you said that you had linked your GoPro - was that directly plugged into the HDMI port on the ATEM Mini pls?
I have a go pro 8 and bought the media mod case to get the HDMI output. it works but you'll need to spend some time tweaking the colours
You are a life saver, thank you!
you're welcome, Robert!
Thank you so much! A brilliant video!!!
Thanks, that's very much appreciated!
Amazing video...Thank you. Learned so much from all your videos. How did you get a single-window "Program Mode" in OBS?
@tj vangarden all good. I figured it out. Thanks for the reply
Thank you so much for this video, it helped me a lot. Appreciated!
Mine is still on back order. I have a preorder everywhere lol. I want this thing so bad. Great video man. Thanks for the info. Because of your videos I think the Mini is enough for my needs the pro would be nice but not needed. Would love to see the preview in a update.
Thanks for the great tutorials, the complete tour that you did was great! I do have one question that I can't seem to find an answer for (so the answer is probably no). Can you utilize the preview mode in OBS through the ATEM mini or do you need to feed the preview through the HDMI? Thanks for your time!
BRAVOOO! very useful and...love your style! 👏👏👏
Thanks Oscar!
I appreciate your Video where I am trying to do
Great information. Next time please slow down. I was trying to keep up. However, this was awesome. I am trying to get mine set up very soon for my math classes. I just bought the mini. I am new to it all.
Woow ! Thanks so much ! Do you know if there is a way to get the preview in the ATEM software or in OBS ?
ATEM software doesn’t show video, so, no. In OBS, the only way to get preview would be to set the HDMI to Preview (as is shown in this video), and then feed that into the computer via an HDMI to USB adapter.
Seeing a lag on the GoPro feed when you are switching Previews and Program. Is that normal? Referring from 10:11 onwards....
Yeah, the GoPro has serious lag
You're awesome coach.. Thank you!
I've just found your channel, and I am loving your content. Your style is down to earth and to the point, which is a great combo - thank you. Subbed!
Thank you kindly!
LIVE saver. Thank you
You're welcome!
Very Helpful. Thank you
Ho,thank for this food lesson,please,any chance to lower the latency?thank you
boa tarde, os botões da minha ATEM MINE não ficam verde, ja mudei para preview e nada, o que pode ser?
Thank Joseph, this is exactly what I was looking for! Very well explained :) I'm in the process of configuring my ATEM mini and got stuck on how to setup preview on the device itself and leave the USB C for webcam output only. It's going to be important not to combine streaming and software control on the same computer via USB. If I do need the software control then I connect an alternate computer via the network. Multiview would be cool for what I need but not essential.
Glad this video could hep!
Or use a simple multiview HDMI hub (OREI for $90) to view all streams on any cheapo HDMI monitor and HDMI splitter running each feed into the ATEM.
Or buy the ATEM Mini Pro that has Multiview :-)
The HDMI Output on my ATEM MINI doesn't work as it should.
In the ATEM Software Control, the 'Camera 1 Direct' option works, but none of the others do. I'd like to have the HDMI output as 'Preview' mode, so I can see the camera I am about to switch to.
Have tried every available combination of different cameras, different HDMI cables, have tried two different output screens(projector and computer monitor), even tried putting a powered HDMI splitter between the HDMI Output and the screens.
I saw on the BM forum that others have experienced this too, but I didn't see a fix - surely they have sorted this out!?!
The ATEM Mini Firmware is at 8.6.1
It is the original, most basic ATEM Mini
Any ideas would be greatly appreciated, thankyou.
Try a reset of the hardware. Put it in recovery mode by holding down the upper left “ON” button while connecting to power. That puts it into a state where a firmware update is required. Make sure you have latest firmware installed first (you don’t now).
thank you very much. Although I am watching this after 4 years, there is till a lot to learn from this video. Please is there anyway to preview using the Atem software. i.e show the preview on your Macbook?
Thanks for watching. There’s a couple ways you could get the ATEM video on your computer screen. If you are controlling the ATEM over the network, then you can use the USB output to connect to a WebCam software or OBS. That will show you the program. However, if you want the preview or the multiview, then the only way to do that is to use one of the AGEM HDMI outputs and run that into a HDMI to USB converter and then into your computer and again use OBS or something like that to see it.
Thank you for this. that output select on the top menu is just so dumb. Why is that not an option in the software control? Drove me crazy for 2 days and didn't know what was wrong.
You have to understand that this is a miniature version of a much, much bigger product. Sometimes those menus that don't make sense at this scale are a lot more logical when it's bigger. My big ATEM has four of those outputs and it's incredible to be able to separately determine what goes through them.
One question: is "program" always fed though the USB-C? There's no indication but I assume that is the case. It's only the HDMI that can switch between "program" and "preview". Good video!
That’s right, John. USB-C (webcam) is always Program.