Connect ATEM to Computer, iPad, iPhone, Android, Wireless HDMI, Streaming Bridge - ATEM Mini Tips 08
HTML-код
- Опубликовано: 5 июл 2024
- Want 4+ hours of pure ATEM training?
Watch this: • ATEM Master Class V1 -...
You know you can connect a camera to your ATEM Mini but what else can you easily connect? It turns out a LOT! Learn how to connect and configure a Mac, an iPad, an iPhone, a Chromecast receiver, a wireless HDMI, an ATEM Streaming Bridge, and even a dedicated HDMI video player!
Blackmagic ATEM Mini Complete Tour
Watch Now: • Blackmagic ATEM Mini C...
THE HARDWARE YOU SAW IN THE VIDEO
My favorite USB-C to HDMI cables amzn.to/3s81dXi
Apple USB-C to HDMI adapter geni.us/oUlqe1s
Belkin USB-C to HDMI adapter geni.us/belkin
Apple Lightning to HDMI adapter geni.us/sTrF7Px
MiraScreen Airplay and Chromecast device amzn.to/3s1e8Ky
HDMI 90˚ adapter amzn.to/2Q5F3Yb
AGPTEK HDMI video player (little blue player box) amzn.to/2RnZ6Sx
ATEM Streaming Bridge geni.us/ATEMbridge
Holland Mars 300 Wireless HDMI geni.us/300Pro
NEED AN ATEM MINI? HERE'S THE CURRENT LINE-UP
ATEM Mini geni.us/ATEMmini
ATEM Mini Pro geni.us/ATEMminiPro
ATEM Mini Pro ISO geni.us/ATEMminiProISO
ATEM Mini Extreme geni.us/ATEMminiExtreme
ATEM Mini Extreme ISO geni.us/ATEMminiExtremeISO
ATEM Streaming Bridge geni.us/ATEMbridge
Join the channel!
Check out member benefits at ruclips.net/user/photojosephjoin
Subscribe to the new PhotoJoseph LIVE channel!
ruclips.net/user/PhotoJosephLI...
👇🏼 GO HERE for more ATEM info and more camera goodness! 👇🏼
PhotoJoseph.com/yt/AmT008
00:00 - Introduction
00:32 - Overview of all eight devices
01:52 - Connect ATEM Mini to Computer
03:08 - Configuring a computer (dual or mirrored screen and troubleshooting)
06:45 - PiP (Picture in Picture) over ANY source
07:32 - Connect iPad to ATEM mini
07:48 - Configuring an iPad (dual screen with Keynote!)
10:06 - Connecting and configuring ATEM Mini with an iPhone
10:30 - Connecting Chrome Cast and Airplay receiver to ATEM Mini (for Android, Mac, etc.)
11:40 - Connecting wireless HDMI receiver to ATEM Mini (Hollyland Mars 300)
12:18 - Connecting an ATEM Streaming Bridge
12:56 - Connecting a generic HDMI video player
13:28 - Wrap-up and overview
13:48 - IMPORTANT NOTE for ATEM (non-Mini) users!
When connecting a Mac or PC to your ATEM Mini, the screen should just show up. But if it doesn't, you may need to force the resolution to 1920x1080 and even force the frequency to 60Hz (or whatever is best for your region). You can run a computer in dual screen mode (ideal for Keynote or PowerPoint presentations) or in mirroring mode (ideal for video playback or software demos)! I'll also show you various options for connecting, including HDMI adapters and USB-C to HDMI cables.
You can also connect an iPad or iPhone using a USB-C to HDMI or Lightning to HDMI adapter, but the image won't be full screen when you do. I'll talk about cropping out the empty space and filling the screen with the image or placing it against your video background.
I'll show you the Mirascreen Chromecast and Airplay receiver, making it easy to share nearly any screen, including an Android phone or a single Chrome browser tab!
I'll connect a Hollyland Mars 300 Wireless HDMI receiver for including a remote camera across the room and a Blackmagic ATEM Streaming Bridge for connecting a remote camera across the world!
And finally, I'll look at a tiny little HDMI video player, which is perfect for background video, looping interstitials, and so on!
The “ATEM (mini) Tips” collection is an ongoing series of small tips for your @Blackmagic Design ATEM hardware - no matter which model you use. Offering answers and solutions to common questions and problems, these tips are bite-sized videos to help you get the most from your investment.
Check out the Playlist:
• ATEM Mini Tips Series
⚠️ DISCLAIMER ⚠️ I am a professional content creator, a photographer, RUclipsr, filmmaker, and ALSO a Panasonic LUMIX Ambassador. This means I am SPONSORED by Panasonic and therefore am naturally biased towards their gear. I regularly state this in my videos, but it's still true if I don't say it. Thanks for watching!
► AFFILIATE DISCLAIMER : This channel is an affiliate, partner, or associate with many participating retailers and companies, including Amazon, B&H, Adorama, and others. As an Amazon Associate, I earn from qualifying purchases, as I do from other affiliate links.
I use Genius for affiliate links - it's awesome, check it out at geni.us/sign-up
- PhotoJoseph
#atemmini #atemminipro #blackmagicdesign
.
.
.
Keywords:
connect atem to computer
atem mini tips
connect atem mini to computer
connect ipad to atem mini
connect your atem mini to a network
atem mini
blackmagic atem mini
atem network setup
blackmagic design atem mini
atem mini setup
blackmagic atem
atem mini tutorial
atem mini extreme
atem mini pro 
Кино
UPDATE: Mac users; set the display color profile to SMPTE 431-2-2007 DCI (P3) for best color from the Mac screen on the ATEM! // This tip is a result of YOUR poll results! I hope you like it, and if you do be sure to subscribe! ruclips.net/user/photojoseph
Million thanks! Straight to the point and above all you bring the lab studio to us. I love these series! 👍👌
Thank you!
Great information! I appreciate the way you troubleshoot each connected device.
Thank you Kevin!
Thank you for having such an informative channel without the RUclipsr cringe factor! It’s very much appreciated! Thank you for all you do!
Dude your channel is so legit. You make the most useful searchable videos. Every time I search for something ATEM related your channel pops up and your vids always help. Thank you!!
This is awesome, loving your Atem quick tip videos!!! Thanks for taking time to create excellent content.
Thank you for watching!
Great video! Love that we can use so many more devices w/ the atem mini extreme.
My goodness gracious! You Sir are Da Man!
THANK YOU SO MUCH for your videos (this one is GREAT!)
Amazing! you make everything look and sound very easy and simple for a dummy like me. Now I need to practice what I have learned from this video. Thanks.
Haha thanks!
Excellent video, as always.
This is bloody brilliant, Joseph! Thanks so much!
Thank you, and you’re welcome!
Thanks for sharing, especially the bridge and miracast.
As someone who is looking to move into getting a switcher like this, this is so good!
Also, I teach a high school video production class and this is a great way to see the possibilities for my students!
Thanks!
Awesome Brian, and yeah, these are so great in education. Even if you’re not streaming; think about projecting multiple camera angles on the wall or on a big TV for things like science experiments in the classroom!
Wonderful presentation!!!
To the point, clear and such valuable information! I can’t believe black magic has not scooped you up and have you do their product tutorials if they haven’t already. You are amazing keep up the good work!
Haha thanks man. No Sponsorhip but I don’t think they do that for anyone :-)
1) extremely helpful video, thank you!
2) I have one on the way to upgrade my RUclips livestreams
3) beard is on point man! Looks great
Excellent work! Love these ATEM videos! This has been by far the most useful series on RUclips. I would love to see a series of videos using the ATEM & the Hyperdeck mini for: video play back in PiP, motion graphics, executing 2 of these at a time & preferably a set up to execute these via Stream Deck if possible.There are currently no videos addressing these issues.
I will add this to the list!
Packing this much information without other stuff is extremely rare. Great planning, and execution of a great production. Super quality. I like the ATEM mini, but I have to wonder if I also want the multi source monitor and additional inputs, but price rises rapidly from the smallest unit. Thanks!
Thank you, and you're welcome. If it makes you feel any better, prices go all the way up to $10K so you're not doing bad at $1,000! haha
Impressive! Learned a lot but more info at one session then my feeble brains can retain. I’ll Definitely have to watch a few more times.
haha I'll take those views, thanks! ;-)
You're an excellent trainer! Thanks so much for this video; very helpful! Sub'd :)
Wow!!! Awesome information!!!
Bundle the interfaces w/ cabling,
and shoot us a price! I'm really motivated, after watching your presentation! Thank you so much!!!
Just noticed, some are having problems getting their computers to find the ATEM, during the initial setup process., What are the specs needed, for them to both "see" each other? Briefly...what are the main differences between the different models of the ATEM MINI? Not to buy "overkill" equipment, just a decent (well capable) setup, that gets the job done, "nicely"...without hiccups., Thank you for your time, and great expertise of knowledge!
讲解的太好了，尤其是这个中文字幕，非常完美
Awesome Job Dude. Love your videos
Thanks!
Thanks for that video! 🙏
Ordered that external media player to try to get a looping animated background 😊
great! It's simple but it works!
Have you given OBS a lookover for that? Looking to integrate it more with the workflow here.
Awesome episode. Thanks
Awesome tutorial 👍
Thank you very much!
This is exactly what I needed
Glad to hear that, Trevor!
Love these vids, thanks mate
Thank you for watching!
Bravo!!!! 🔥 thank you. Nice work.
Thanks!
Fantastic tips, many thanks
and many you're welcomes, Jeremy! ;-)
Super helpful. I’d love to see what you did in the macros for cropping and scaling the iPad and iPhone.
It's just crop and scale… do you think that's worth a unique tip?
@@photojoseph I think it would be. I'd be keen at least!
Great video!
Thanks!
great info . . . thank you sir!
Nice overview!
Thanks Thomas!
What I would have love to have seen is the iPhone in widescreen mode connected to ATEM. Great video. 👍🏾
Just rotate the phone!
Thanks for that video!
Thanks for watching!
These are SOOO good.
Thank you!
Great video. Thank you.
Waiting for my Mini Extreme to do a full day webinar for a client.
Questions:
1: I will have a hard drive connected for a recorded backup - does the hard drive NEED to be an SSD?
2: Is it necessary for me to use the Ethernet connection with the ATEM if I’m going to connect to a computer anyway? I will be using ZOOM for the webinar.
THank you.
Hi Joseph, thanks so much for such an awesome tutorial, fingers crossed you could have just helped me with a workaround to zoom crashing when I screen share. I hadn’t realised I could directly connect my computer to display the screen to play slides.
I only have the basic atem mini, but should still work right?
Thanks so much from a non techie sewing teacher in london streaming classes via atem mini 🙏
Great video tips
I have the atem mini pro, I was wondering if it is possible to stream to RUclips on the atem and then use obs on the computer to stream to Facebook as long as I have the uploaded speed.
Thanks for the well packed piece of information.Amazing!
Does the Apple Lightning to HDMI adapter send the audio too to the ATEM Mini Pro/ISO Although, it is not ideal, it's good to know it if it does it.
yes it does!
Wow! Another great presentation. I have a vague memory of being able to join you via a paid monthly subscription, how do I check the best way of doing this?
We all need to support your efforts of this means of remote learning.
Thanks Carl
Thanks, I really appreciate that, Carl! I have a few support options. You can join the RUclips channel itself at ruclips.net/user/photojosephjoin or you can join as a member at my own website, where you get additional benefits including being able to watch these videos at higher quality and ad-free photojoseph.com/member
Excellent!
Thanks!
Very nice overview and informative video. You are really fast...!
I've been using similar setup for a customer last year with a ATEM Extreme ISO 4 BMDs, 2 iPads, 2 Computers hooked up, but also a Samsung Flip2 in Background, which I managed to use a second ATEM Mini Pro ISO for choosing the content to be visible in the background on the Flip, for explaining stuff on screen as a presenter.
Some questions:
1. What is the longest cable you find to work for connecting an iPad to the ATEM inputs? In Meters..
2. Have you tried/managed to send a live feed from iPad, iPhone to the MiraScreen too?
3. How many concurrent WIFI connected MiraScreen with iPads or phones as mobile cameras do you think will work flawlessly?
Thinking of a cheap solutions for schools to utilize existing iPads as cameras for studio setup and beware from cables hindering creativity.
Looking forward to your comments here.
Keep going.
Nice video, but I figured out one think. can you try to do stinger transition with agptek hd media player?
I love this!
Thank you!
More of this contents for newbies like me @photojoseph but I still watch your live vids
I'm trying to balance between newbies and oldies… lots of viewers to satisfy ;-)
Your videos are always so helpful : ) Is it possible to get the sound from the iphone to play while connected to the atem. I do social media training videos and want to be able to hear the sound that is playing on the phone while i'm sharing the screen. Thank you so much!
You’re sharing how, lightning to HDMI? The audio should be there; make sure the audio input for the phone is enabled!
Great video, were there any issues connecting the mirascreen wireless receiver? I have been trying to connect a windows wireless display adaptor but the mini does not show the display.
Thank you for this video @PhotoJoseph. Is there a difference which input to use for connecting laptop? I heard that some inputs operate in YUV vs RGB. What are tour thoughts on this?
I have never heard that. afaik The only difference between inputs is that input 1 has a lower latency mode designed for gaming
Really like your Mini series on the ATEM. If you've not done any detailed info yet, can you try to show your HDMI video player? I'd like to try to introduce that into my ATEM Mini for a Livestream intro.
There isn’t much to show. It’s cheap and shitty but it does the job.
Any tips on connecting a few usb webcams to the atem mini? What adapters to use
Sorry, no such thing. If USB cameras are your jam, watch this ruclips.net/video/yMEGC4eJ7SM/видео.html
Hi - I came across this video yesterday as I was looking for an option to use an Ipad with Blackmagic ATEM mini extreme at my church. To get the full screen, you said you had to scale it up a little and created a macro for this. I'm assuming that you did the scaling through the ATEM mini extreme, right? Does this also require the use of a downstream key? I want to use Powerpoint presentions in this way. Thank you.
Awesome video... thanks! Subscribed! One question: I’ve heard the the HDMI plugs can fail over time from plugging / unplugging inputs (weakening the connection of the port to the ATEM motherboard). So I’m looking for something like a backplane or even pigtail hdmi plugs that could be plugged into the ATEM once and from then on, you just plug into the ‘pigtails’ but I haven’t been able to find anything like this. Ideas?
I've never heard of that happening, and I hear from a LOT of ATEM users. But, that doesn't mean it can't happen. I'd say this - HDMI is designed to be plugged and unplugged many man times. If ports are falling apart, it's probably user abuse more than product failure. That said, to answer your question, I use these L-brackets for various uses, and this would do what you want: amzn.to/2Q5F3Yb
Hi Joseph, I use the basic atem mini to teach inside zoom. Currently I use the audio from my go pro, as my main camera has no audio. I bought a rode mini, which I want to use but believe there’s an issue with time lag when plugged into atem? Do you have any resources on how I can do this? Or a suggestion for a better mic to connect with my atem? I live near a fire station and the audio picks up too many sirens. Thanks for your ace content 🙏
Thanks! What is the name/type of videoplayer you use?
Are you asking about the little blue box? It's listed in the description: AGPTEK HDMI video player (little blue player box) amzn.to/2RnZ6Sx
Thank you very much for this video! I Would have a question: Can one flip the picture 90 degrees clockwise or counterclockwise in Atem Mini?
I thought you could but I just checked the ATEM Mini Pro ISO and the ATEM Mini Extreme, and rotation of the upstream key is NOT available. I also own a much higher end ATEM 2 M/E, and on that one, you can rotate the USK. Sorry!
@@photojoseph Ok - thank You for your answer! There is this problem with Osmo pocket and iPhone connection that would solve by rotating the picture in Atem Mini but I try to find a new solution. Thank you again! 😊
Can you do a video on how you can have your laptop connected and still be able to record all the feeds and the program on the ISO ATEM
You mean laptop connected over USB? You can’t unless you have an Extreme model with dual USB. You’re a channel member (thank you!) so join the private discord (instructions in benefits description) and raise the topic. Lots of solutions, depending on what you’re doing.
AGPtEK Mini 1080P Full HD Digital Media Player, worked great on ATEM Mini Pro, but distorted audio over HDMI on ATEM Mini Pro Extreme.
Has anyone else had audio issues with the player on the Extreme?
Thanks for the videos.
Great video thanks! If I connect a laptop through the Atem via hdmi and play a video will the audio come through too?
Yep! You’ll see HDMI as an audio option on the computer.
@@photojoseph cheers thanks for that. I had a little play around and found where to do it from.. thanks bud for replying 👍
Hi Joseph, if you play a 16:9 video on the iPad, would it then display the 16:9 video with no black bars?
Yep!
I set up a Mac Mini (one just before the M1) in an ATEM Mini Pro Iso setup. We went through a Seetec Quad monitor and was trying to feed the video from the computer through the Seetec to the ATEM.. Copyright protection stoped us and we had to spend $360 on a Decimator to get the Copyright protection off of it due to having the one extra stop through the screen . We are using the ATEM Mini Pro Iso HDMI out for the visual playback due to needing to clone the output (its also streaming to a RUclips)to an audience outside of the church (Covid Protocol in California) so we could not use that output for the multi display. And our third monitor is being sent via a third Decimator (our second sends the video to the outside screens) to the sanctuary stage screens. (ProPresenter) Its a fun little set up with 3 PTZ optic cameras.
Awesome.And vey weird about the copy protection. Connecting the Mac to the ATEM directly works fine, but passing it through the SEETEC _adds_ protection? That doesn't really make sense… so strange!
@@photojoseph Thats what was told to me by a guy who sets these up ALL the time. NO matter what resolution or frequency we tried it would show up on the Quad but not on the ATEM.. There is supposedly protection already on the Mac called DHCP And you are supposed to be able to bypass it via an HDMI Splitter also (too bad I heard about that after the fact :) those are cheaper but thats what the Decimator also does but at a very hefty price tag.
@@HalWhite weird. But I’m glad it worked!!
Nice.
Thank you :-)
How do I properly connect my ATEM Mini Extreme ISO to my RODEcaster Pro2 to my computer TY
Hi, I was checking in the MiraScreen and I found many options. Could you share the exact brand/model you are using ? Thanks.
There’s a link in the description. If it’s not available anymore then just try any one that supports what you want (i.e. Airplay)
Hey Joseph, I’m evaluating iPad screen recording options. Do you suggest the hdmi out? Is AirPlay pretty unusable? Or should I consider another method? Excited to teach resolve on iPad.
That is going to be so cool!!! For recorded content I use the built in screen record. Make sure audio is on so you can sync it. If you use Airplay then you can capture to the computer or to a recorder but stability can definitely be an issue. Screenflow is another great option; it’ll record a tethered device. I don’t use it much because I want the iOS device wireless on camera, but it works well. I don’t recall the resolution you get from that so it’s worth looking at again. Do you use slates when you record? Text me sometime today and I can walk you through some peculiarities of it.
@@photojoseph screenflow teathered seems like it might be best for pre-recorded tutorials so I can use the screenflow tools I'm use to from my desktop screens. I keep looking for an excuse to buy an atem mini pro though, haha. No slates, but I do use a mic splitter to send my voice into the computer and camera at the same time for sync.
See what kind of resolution you get from it, but yeah if you're already using Screenflow then that's probably the best way. ATEM Mini would force it down to 1080p and actually lower, with black bars. Sharing to 4K Apple TV will give you a 4K output but it's unclear where it's scaled. I'd just take the direct internal screen capture, or the Screenflow capture.
Hello! Thanks for the great video! I have a question: I have several live streamings for weddings in May. I'm considering buying the Atem Mini Extreme and two Mars 400s Pro, in a 3-camera setup, the third being the wide angle on a tripod. Is this a good setup for weddings? Thanks in advance!
Sure, just keep in mind that the Mars cameras will be delayed from realtime, so they are best used for wide shots and rear shots where you can't see that they are not in sync with any dialog.
@@photojoseph Oh, ok! Thanks a lot sir!
Good luck!
Will this process work with an ATEM mini, and ATEM Pro?
For inputing HDMI from Computer- would something like a Decimator MD-HX help convert for the ATEM when you are receiving feed from a strange computer? Or help if you have to split the HDMI feed with a live projector?
Absolutely. A decimator makes all things right. If you can afford it, it’s the best tool to have on hand.
What camera would you recommend for the Hollyland Mars? I'd like to get a camera shot of the congregation at church. I'd be mounting it to the front wall behind the Pastor on stage. If we can find a PTZ that will work there to be able to move the shot around. The distance from the stage wall to the back wall is around 75 ft, about 85 ft to the video room upstairs. TIA.
Hi James; any camera with clean HDMI out will work with the Hollyland Mars.
Very cool 😎
But I have a question sir?
Can I stream with the phone also directly into the atem and switch from a real camera to a phone camera ?
Yes; when the phone is connected as shown here, you should be able to open the camera and see it on the ATEM. However the camera’s UI will show up here, as it’s just screen mirroring, and there may be an additional delay. I think Filmic Pro added a clean UI feature to the app; worth looking into if you want to use it this way.
@@photojoseph thanks so much
Great help
God bless you
@14:14 when you show that chart, i've noticed that 4K resolution isn't there. Does that mean that the ATEM cannot downscale from 4K to 1080p? Reason for asking is that my only current camera that has clean HDMI (but isn't my iPhone) is being used as my webcam on the ATEM mini. I often have to change the settings to 1080p but i want to record in 4K when I take it off the "webcam mode" and bring it out with me (but often forget to change it to 4K).
That is correct. You can not scale down a 4K input. Some cameras (like the LUMIX cameras) will record 4K but output 1080p, which is very handy for situations like this.
Thanks for your video! and excuse my bad English... I'm French . I have understand all about your différent device connection, but on my iPhone (11 Pro )I can't see the similar setting to your iPad settings !
“display& brightness “ title exist, but I have no settings like you for set “allow display mode“. everything gone right when I plugged the hdmi wire direct on my Asus screen, but the fps settings must be wrong for the Atem tv studio hd. an idea to fix that please? thank you
Those settings are iPad only. The output from iPad and iPhone is always 1080p59.94 so for it to work on the ATEM TV Studio, you’d have to have it set to that resolution and frequency. Only the ATEM Mini line has built-in scalers.
Hello.how to change video standard on atem sdi extreme ISO?
My camera is 1080i but on atem is 1080p.i cant change because is grey.but on my old atem 1 can switch to 1080i. Can you explain?
great video - I have a question - we are currently using the mini pro to go play movies and switch between holding images. the process is iMac - mini pro - monitor - LED processor vx6s - LED video wall 8m x 4m
the problem we had was latency, whilst watching the movie on the video wall every 30 seconds or so the movie would lag as such like slow motion for 1-2 seconds - we did process of elimination and found it was the mini pro
any tips how we can rectify this
Weird. What do you mean by “lag”… every 30 seconds it “lags” 1-2 seconds… for that time it is skipping frames, playing the same video but slower, so the playback is actually longer than the video? It could be a framerate mismatch. Make sure the ATEM is set to the same framerate as your content, and video wall. They all have to match (23.98, 25, 28.97, etc)
What would I need to display iso view on television?
When would you want or need to use something like the Decimator MD HX for frame rate or aspect ratio conversion ?
Lots of hardware doesn’t have built in scalers, so you may need to scale with a decimator. I’ve used them to flip images to turn a monitor into a mirrored teleprompter. I have one the scales up to 4K. Lots of uses for them. One of those indispensable tools.
@@photojoseph Do the ATEM Minis and Constellations have built in scalers ? I ask because I thought I saw someone on YT talking about using a Decimator with an ATEM.
Yes. The mini versions were the first to have scalers. Then came the Constellations; they all do. None of the HD models can bring in a 4K image and scale it down however. My ATEM is an older 4K (pre-Constellations) and I have to bring in precisely the resolution and frequency it’s set to.
Hey man! Great video! I do have a question though. So i have the mini extreme too.. but hdmi out from our iMac into the switcher sends HORRIBLE color.. i contacted BMD and they said the switcher receives YUV color profile not RGB color profile
Any issues you’ve had with this?
Oh crap I should have included that in this!! Argh, I knew I forgot something. OK, in the Display settings, on the Display that's the BMD, set the color profile to SMPTE 431-2-2007 DCI (P3). That'll fix the color. Arghghg!! Now I'm mad at myself.
@@photojoseph THANK U!!! the gear is at church so I’ll have to wait until Wednesday but thank u for the quick reply!!! Hopefully it works on ours too!!
Just subscribed! Thanks for the info again!!
Sure thing. I’m going to have to release an update video. At least this one will truly be a “mini” tip!
@@photojoseph I’m definitely impressed with your response time haha thank you again!!
☺️
Can i connect canon 5D mark iii & use it with vmix
So I have an HDMI cord coming out of both my Mac Book Pro & HP Laptops for video, my question is how do I get the audio along with it to play through Zoom?
Set the audio output in your computer to play out the HDMI port. Once a device is connected, it should show up there as an option.
Do you know if there is a way to use an iPad as a monitor for the ATEM?
Not really. I did see someone routed a DJI Raveneye through to an iPad, but that isn't exactly normal or economical for just monitoring.
I have an Atem mini, but I can't project the output on an EPSON W32 +, do you have any idea why?
I already tried HDMI cables of different quality and it only flashes and nothing is seen, in all televisions yes
with all that gear, your focus is blurry. First things first ? Nice collection of gear though! Especially the Chromecast / Airplay receiver idea is a good one. I shall use that on my setup. Thanks for sharing.
Blurry? What are you talking about
Hey Joe, I have 4 Logic pro webcams. can I connect them to the ATEM?
Do you mean Logitech? If it’s a USB webcam, then no. If it has HDMI out, then sure. Has to be HDMI.
I know is is backwards but can I connect a webcam to the hdmi input on the atem.
How do you do a macro for crop the black bars. The macro can be turn on and off when you want? I mean, imagine i want to cut the screen in the middle, on the left i want the image from the CAM1 (prepared to only take the center of the image) and on the right i want an image from cam2, which is a computer. Is it possible to set that in some moments, and in others go back to normal ? I have an atem mini pro.
I have several videos on making macros. Search RUclips for “PhotoJoseph ATEM macros”.
o my quesions:
Many thanks for your programs. I am a beginner and start to understand about connection of an Android mobile, as an input camera, to aAtem Mini but have yet not understand so clealy 🙂 Would you please advice me in this area? My questions:
1. If I will use several Android mobiles as different input cameras to a Atem Mini, do I need one extrnal hardware for each mobile or one hardware for all of them?
Which hardware will be best? A chrome cast or a Mirascreen or what other hardware?
Or I just need some USB C HDMI adapter for connecting USB C to the mobile and HDMI to the Atem Mini?
Please note that I will preferably use the mobile camera wireless!
2. What do I need as software/app in this area? which app?
Does the Black magic's software itself, offer some possibilities/functions for this need?
Many thanks in advance!
Thanks for watching! You need a connector for each phone. Hardwire is always best (and cheapest) but you can do wireless too. And the software is only the blackmagic ATEM app.
I been having so much trouble with my Atem Mini Pro connecting to my MacBook Pro. 1. It doesn't automatically come up. 2. I downloaded the software and nothing happens. 3. I tried to change the resolution and it only gives one option. 4. The Gather Windows option doesn't work and scaled shows nothing at all. PLEASE HELP!!!
I just bought an ATEM Mini Extreme ISO. I am having issues cutting to cameras. I cannot get it off the Preview option. Any tips?
Open the setup app - you must have set it to preview mode!
Joseph, where can I find the macros for the IPad? To fill in the black space?
You mean to zoom in? You have to make your own. Just scale the shot and create a macro. If you’ve never made one, search youtube for “PhotoJoseph ATEM macros”. I have several videos on it.
@@photojoseph thank you and great work. I'm going to follow you and perhaps join your group.
I have an Atem Mini Pro Iso. There is only one USB C extension. If I connect this one to my laptop, is it possible to record from Atem this way (thru laptop)? And how?
You could use OBS to record, but that might interrupt whatever else you’re using the USB connection for. The Extreme models have two USB ports for this reason.
Great tutorial. I keep having low quality computer screen. I followed all the videos but the colors (mainly red) is not good. Do you know why?
I’m quite sure the answer is in your first sentence, amigo!
@@photojoseph i might have written in the wrong way. I have a new mac m1 and 4K monitor. I meant the video coming out of atem is in low color quality but only the screen share.
Ahh that makes more sense. Watch this video and let me know if this helps: ruclips.net/video/J8OBaN-_-Jc/видео.html
What about the audio? what kind of mic are you using? how did you connected to the ATEM? any delay?
Audio can be routed though a camera or into the 3.5mm inputs. Audio is real-time; video is delayed. That’s why it’s easier to route audio through the camera to keep everything in sync. Or you can program the appropriate delay in the ATEM audio inputs. Watch this older video to learn how: ATEM Mini / Pro Update for Audio Sync Delay!
ruclips.net/video/H07ZW72CSD0/видео.html
@@photojoseph Thank you for answering my question, I have lavalier microphone connected to the camera but Im recording on my computer with Rolan VRCapture and the audio has a delay, also if I don't hit the record bottom on the camera the audio is not recorded on the computer, I try to make it faster and simplify by recording straight to the computer, the other option that I'm considering is to put a mic straight to the computer and see if it works, what mic do you recommend to connect straight to the computer with a USB if you don't mind me asking you ?
my bad yes the video is delayed.
I don't have a USB mic recommendation but I wouldn't try using a USB mic with the ATEM. The routing will not be together and you could experience drift.
Hi. Thanks for the video. I researched a bit and some people say that an ATEM Mini Pro can directly hook up an Android phone (without your or a similar streaming setup). Any thoughts on this? Why can't an ATEM Mini do this? And by directly hook up I mean via USB-C to HDMI.
To share the phone’s screen? Possibly. I did this video a while ago but didn’t I show a USB-C to HDMI cable for the iPad?
@@photojoseph you did, but an iPhone works completely different to an Android device. Also I want to use it as a webcam (still screensharing though). I think I'll just give it a try later today.
Yeah I have no idea, sorry. I barley use android.
What about audio from the hdmi devices, do all send audio?
They all CAN send audio; it just depends if you want to use that audio or not. Ever HDMI input has audio support, and you can turn on whichever audio inputs you want.
I have a Mac 27 and Atem Mini Pro, Is there any way to connect a Logiteck 4K usb camera to my Atem Mini Pro?
nope, sorry. HDMI cameras only.
SOS. Thanks for the tutorial. I can't broadcast live using my cell's internet. I can't broadcast my friends' soccer games. Please I need your help, what should I do? I have an ATEM Mini Extreme Pro. Thank you
I can’t help you without details, man. Does your phone have a tethering plan on it? It could be as simple as that.
Hola JP!! Necesito una respuesta URGENTE!! Tengo un Atem Mini Pro y necesito hacer un Livestream. Utilizo como cámaras la Sony A7iii y Lumix G7 pero mis cable micro HDMI a HDMI son de 5 metros de distancia (no consigo más largos). El problema es que debo estar a 15 metros de distancia para no interrumpir pero no sé que cables debo usar. ¿Podrías ayudarme, necesito un consejo?
You don't need special cables - just longer ones. Wherever you can order from fastest, you'll need to simply buy longer cables!
tip for ipad: shifscreen is awesome and let you use fullscreen monitor
What does it do that macOS extended desktop does not?
I’m still trying to get a simple solution. I use a two iPhones and a GoPro. I’m trying to route all through my ATEM Mini Pro. Then I need to connect to my MacBook Pro to the studio software for streaming. What am I not getting all devices to transmit.
you're gonna have to tell me how you're trying to connect them, and what is or isn't working. I can't tell you what you're doing wrong without knowing what you're doing ;-) You may want to schedule some 1:1 time with me…PhotoJoseph.com/1to11
how do we sort out mirroring of my mac mini to atem mini to zoom mirrored???
Answered elsewhere
How to send video signal from ptz cameras to atem via ethernet ndi?
HDMI or SDI - no different than any other camera.