You are doing a wonderful job helping people like me to understand and make it possible for churches to do better work for HIS people. THANKS a lot for all your videos!!! GOD bless you more!!
I have similar setup. You do not need the usb cord, you can connect the computer to the switcher by IP address. That frees up the USB port to plug a storage device so you can use the record function.
@@AJaytheCEO I was unaware that there was any setup you could do from usb that you could not do from ethernet. You just have to select the I intial connection differently. I ended up.using the usb and obs initially because the hardware encoder and Facebook did not play well together. Live was ok but after processing the sound was out of sync. Windows updates messed me up last Sunday's service so I tried the hardware encoder again and Facebook must have fixed it now it is ok. I also decided I wanted the usb to save the service to disk so if the streaming gets interrupted I can upload the service afterwards. I love your videos, Very informative and well presented. Thank you.
Suggestion, you really shouldn't take XLR balanced to unbslanced. out of the Ultramatch with a Stereo XLR Females to male jack to the line in of the ATEM. The Ultramatch is a balanced out and the ATEM is unbalanced in. You have the wrong impedance. You need to use a Di box in the middle. The XLRs coming out of the Ultramatch into the Balanced +4 dbu of the Di box. The Di box Line Level -10 dbV into the line level - 15 dbV input of the ATEM. Do not use an XLR stereo females to jack adapter out of the Di box. Remember your taking professional high impedance equipment and connecting it to a consumer low impedance device. You need to have the two inverse phase and ground pushed into a single phase dual channel. This is the purpose of a Di Box using either active circuitry or passive transformers. The Ultramatch is an Active source, so the Di Box needs to be a Passive Di Box If you have a Passive Source output, than the Di Box needs to be Active. The ART Cleanbox Pro is an example of an Active Di Box. For your situation it may be difficult to find a Passive Box with the inputs you need. In this scenario you may be forced to get the ART Cleanbox Pro. It's better than just having the cable setup you currently have to the ATEM. You will also notice a discernable difference in audio quality while monitoring the ATEMs audio. Currently you have the inverse phase of the balanced signal being predominantly pushed to the left channel of the line level input of the ATEM. This leaves the sound dull, empty and at a lower signal decibal. With the Cleanbox converting down to unbalanced HiFi Line Level, you'll hear the sound filling both channels equally, fully and at full volume. I know you may not be having any issues and may think that it's not worth it. However, Electromagnetic interference inside and outside your church will always fluctuate. You don't want to take a chance a loud or low hum will occur spontaneously during service. Besides, the Cleanbox is cheap. About $80.
a tip for proclaim! if you go to setting> Display and choose the foreground only. it will display the text only on a black background. alternatively, you can make your own custom confidence monitor display that say only shows 2 lines of text and instead of displaying that as a confidence display it as working as your lower 4/3 lyrics! hope that help if you need more info i am happy to help!
Routing the audio directly to the ATEM mini, it doesn't have the lag of the HDMI feeds, so it is slightly early (you're a musician so you must have noticed?). We have routed it through one of our cameras which has XLR input, and then use the audio from that HDMI stream as main audio, or can you insert a delay in the audio processor or mixer? We only have an analog out mixer with reverb, so we had to do it the simple way.
This was so helpful. I've been struggling to really utilize our ATEM and even having some issues with basic functions. I'm so glad I found your tutorial as I now have a much better understanding of both the hardware and software.
Thanks for this video. You have been extremely helpful and have an amazing passion to share God's word through technology. Thanks again for the video, our Atem mini Pro will be arriving soon so can't wait to set it up!
Thanks. It solved one issue, ATEM Mini Pro is more powerful than the ATEM mini. Well, our church issue is that we don't have an Ethernet yet. As it has been neglected sometime ago and because of the lock down. I am thinking of using an i5 computer with an extra monitor, buy an ATEM Mini Pro and a Mevo camera using Zoom as our live streaming platform. We are hesitant for further investment, as if we don't have a working Ethernet connection, we need to use a WIFI hotspot. So if that's the case, we might perhaps use a mobile phone for Zoom Connection and share the video to make the mobile phone a cohost. This will be changed if we can properly invest an i7 computer. Our church desktop for PowerPoint Presentation may be antique. So, we need to consider that. Do you think using an ATEM Mini Pro with an i5 lap top (or i7 desk top) with ethernet will work with Zoom. I have an i7 desktop, but bringing it to church every Sunday will be very funny and exhausted. Thank you and looking forward to hear from you soon.
Thanks so much Ajay. I am having problem with the monitor too. It is not clear how you solved the same problem here. What did you change the frame rate to? I finished setting up my brand new ATEM MINI PRO ISO last night for service today. Except today I get to church and while setting up I think I may have changed a setting on the ATEM SOFTWARE CONTROL (1080p24fps) All of a sudden my monitor stops working and I am unable to use the switcher for service today cause I can’t see any of the inputs/preview/programme on the monitor. I have tried all the different video settings but the Monitor is still saying “NO SIGNAL”. But it was working fine last night. I have tried everything (restart ATEM MINI PRO, COMPUTER, RESTORE ATEM MINI PRO ISO through SOFTWARE CENTER by going to FILE -> RESTORE). Please advise what to do! Obviously a bit down I couldn’t use my ATEM MINI PRO ISO for the first time today.
Hi AJ, can you please do a more comprehensive setup instruction. I feel like you are assuming that I know some of the connections etc. And there is way too much movement compared to how you normally do your videos. Is there away the you can actually show the connections, software, how to set it up etc. Right now it's like you are assuming that I know. Thank you and i look forward to seeing the redo.
Can you do an updated video on this, where you go over setting up an output out of propresenter for full screen lyrics and scriptures using 2 line slides in the congregation and have the same slides display at the bottom of the screen on top of the video on the streaming feed in the atem mini Pro
I have a similar video explaining this setup but you would not be able to do both just with the atem mini pro. You would need something like OBS, vmix or some other additional switcher software to manipulate this type of workflow
I live stream for my church using OBS. I use a separate monitor with a PowerPoint for scripture verses and OBS captures that screen as a source. Can I show or capture these verses in the same way with the Atem mini pro??
Technically you would just send your second screen to the ATEM instead of a physical monitor and then it would work by you selecting that input on the ATEM instead of screen capture.
I am getting ready to order an ATEM mini pro for our church. Was wondering if you have an affiliate link for one. Since we going to buy it anyway why not help you out. Thanks.
This probably isn't the place, but here goes. Do you keep your ATEM Mini plugged in all the time? I had 2 units now that on initial setup work as expected. After leaving everything connected overnight the computer no longer recognizes the ATEM as a webcam via the usb-c out port. I tried connecting it to 3 different PCs and none of them recognized it. The first unit went back to Black Magic support and they were unable to fix it and sent a new one. They are now sending me a third unit. I want to do what I can to keep it functional. It seems like if it was a power surge that more than the usb-c out port would be affected. Any thoughts?
My atem is plugged into a smart switch which kills the power when not in use. So it acts like a power switch. I have not had any issues with it. I've done this same thing even with their bigger switchers since they have no power switch
@@AJaytheCEO Thanks for the reply. I so want this switcher to work as it will make the Zoom experience for our congregation much better. I am completely baffled as to what is happening and that it happened to two units.
@@motownk Sounds like a surge from the computer's USB or power going to the ATEM. You have everything connected to surge protectors right? If not, they should be.
Hey AJ, I have a church setup that is driving me nuts. Not sure if I have a defect in my Atem or it's working as designed. I have two mixers; one for the loft/choir mics and one for the house mics. What I want to do is connect one mixer output (choir) to the mic 2 input on the Atem and the house mic mixer outpout to Mic 1 input on the Atem. What I'm finding is I can't mix the mic inputs. I can hear mic 1 but not mic 2. I know that both inputs are working bc I can move the input from mic 1 to 2 and the audio follows just fine. And it's not a cable issue, I've substituted and still have the problem. HELP?
You are a man of many talents (pianist)! Great job! Thanks for the video. I am helping out a church with their install of their ATEM Mini Pro. This was so helpful! Keep it up bro!
For the DSK, would we need to run another presentation software with a black background if our current presentations uses a video background for the congregation? Or is there a way to use the DSK to allow one presentation with video background to be used for both the congregation as well as livestream? Currently we're doing picture-in-picture mode because our presentations have video backgrounds and we're unsure as to how to use the DSK so the text only shows on stream.
Thank you! - Question: When you connect to the USB-c port to record (via SSD or SD card), how then do you connect to the computer for what BMD calls "webcam out, software control, software updates and panel connection"? Does the hub allow you to both/simultaneously record (SSD or SD) AND connect via the USB3 port to the computer to connect with the Control Panel, etc?
I also use ATEM Mini in my church. There’s a problem tho. Like you, I don’t use Blackmagic cameras to the ATEM Mini and the ATEM software won’t let you do color correction if your cameras aren’t Blackmagic. Without color correction my cameras look bad. I’ve tried using the OBS’ color correction, but the problem is OBS’ color correction read cameras that went through the ATEM as one input, so I can’t put different color correction for each camera. Do you have any suggestion for this issue? Thanks in advance
Thanks for the content! I have an Atem Mini and will be connecting it via my local network. Do I still need the usb connection for streaming software like vmix?
Hey Ajay, My video has stop showing on the TV's in the church. We're using Dell computer, windows 11, 32Gbs ram, GeForce RTX 4060 Ti , Propresenter 7, and the Item mini pro. The PTZ cameras are connected to a 250 watt POE. The is a splitter connected to a the display port in the back of the computer. From the splitter we are running about 100 feet of HDMI cable. Is the splitter stopping the video or is it the length of the HDMI. Do we need an HDMI extender? I do see everything on the computer monitors, but nothing sent from the cameras to the tV's. Help please.
Can I ask a question please We have just had a brand new stem mini pro system installed It refused to accept channels 3 and 4 and if we add a hdmi from the computer it cuts the feed to the screens Any ideas God Bless N
how do I display the program view from the mutilview to the projector screens in the church without the entire multi view showing? I need the multi view for myself in the studio but don't want the congregation to see the mutliview. I 'm using hdmi to connect to the projector screens on the walls
I think I have the answer, but I will ask anyway! I am using Proclaim. If I have the words as you showed on lower third for live stream, is there a way to put it full screen on our screens at church, or do we need proclaim on two different monitors...One for in church and one for online? Thanks!
@@AJaytheCEO Thanks for checking. We have Proclaim Standard On Air License - 1-99, and Proclaim Pro Media - 1-99 If we can, but we would have to upgrade, I would love that insight too! Thanks!
This video is so informative, currently budgeting for the mini pro but our idea is to connect 3 cameras, and type c for webcam and embed the graphics via Easyworship then projection, we intend to record the clean switching without graphics to edit later for our tv program and social media, and the HDMI out to Multicam. What's your opinion on this and what did you use to get the longer hdmi connection?
Question: I have an Atem Mini Pro. I am having an issue where I can't seem to get rid of whats on my camera's LCD screen when it goes through the ATem. Is there a setting I'm missing to get rid of what's on my Sony's LCD screen in the ATEM? I try to do it on my Sony Camera but I can't get rid of everything STB will always remain or battery. Now a capture card works to completely get rid of everything but I was hoping not to have get 3 or 4 capture cards to work the Atem. Is there a setting I'm missing on the Atem that will fix this? Thanks in Advance!
@@AJaytheCEO Thank you! It's a Sony FDR AX 100. Yeah the capture card takes care of it but the Atem doesn't. Clean HDMI output is a new term to me. I will check into it. Thank you!
@AJay, I saw a video where you spoke about Proclaim and the ATEM Mini Pro. My struggle is my live stream is all done in my chrome studio. It’s all green so all my cameras show green. In order to make my streaming work all three cameras need chroma keying. ATEMMini Pro only give one upstream key. There is a program called ATEM Plus Chroma Switcher by atem.satplus.cz , this works great. However it conflicts with my computer. 1. Is it possible for me to add both to the Elgato stream deck XL. If so can you guide me through the process. I have companion down loaded and H2R graphics. 2. As it relates to companion and H2R graphics, I followed your steps and I have my ATEM cameras on my stream deck. How can I add companion and H2R graphics. Is it through the OSC (generic) or can it be done through The Elgato stream deck. Could you please assist. The videos are good yet my challenge is my chroma studio..
Hai bro.. I m a Church pastor..i newly using Atem mini pro.. I dont know how to connect ppt in Atem mini pro..even i dont know direct streaming in atem mini pro .. Can you explain to me
i can t take sound from a mixer where i put the cable on phone? should i search for something like rec out or is working with phone to? i need to install atem mini software and change to line and can i use the phone out from mixer?
@@AJaytheCEO Great video. That was my question too, but it remains unclear for me where the Multiview monitor is then connected id USB is for recording and HDMI for the Projector ans Ethernet is for the livestream.
Great job AJ. Appreciate you. Question. Haven't installed the Atem Mini Pro in our church as yet (waiting for a few more pieces), but if we connect our presenter laptop (presenting EW7), how does that affect what the congregation sees?
Blessings. Is there a way you can setup Atem mini pro automatización? instead of hitting the on button for the sound to come on the live all the time. Just set it up so that it will start recording with sound automatically
Atem Mini , Can you have the HDMI out set to record and split that signal into a monitor and a pc or recording device, will it do both from that port ?? Thanks
Hi. How we can disabled/kill/remove that background sound (noise) when you played the piano there’s a sound like a ground something like that, I have that issue on my church. Thanks.
Hi Ajay So I have a question about the Atem mini pro .so recently we bought an Atem mini pro and a blackmagic studio camera 4k pro so I tried to stream in OBS using Mac mini m2 but when I opened the OBS it turned that the image have dropped all the quality the image was bad so I tried to decrease the quality from (4k to 1080)on the blackmagic studio camera but it didn’t help So I would like your help thank you
Your computer is not fast enough for 4K nor can the atem mini pro accept 4k. Set the camera to 1080p and try to run your stream directly from the atem to see if it is your network or your equipment. if it works then your bottleneck is the mac
Hi AJ, first of all, thank you so much for your videos on Atem Mini & Mini Pro. I actually bought both models as well. I started with using the Atem Mini Pro about 3 weeks ago, love the multiview function, but for some reason, the HDMI output stopped working. It was OK the first 2 weeks, but all of a sudden it stopped working yesterday. I've been using the same setup, same equipment and even the same cables. I noticed around 9:00m, you faced the same issue yourself, but you had it fixed at around 11:24m by switching the video output. I changed mine too, but still doesn't work. What do you the could it possible be ? I read from Blackmagic's forum, a guy actually changed the power adapter from its original 3 amps to 5 amps. Do you think it's advisable ?
We have the ATEM Blackmagic mini connected to our sound system (Sound Craft), but when the organ or any music plays, it sounds garbled. However, the voices come out fine. Can you please help me to correct this problem?
After viewing many youtube videos on live streaming, especially for small churches, what is your perspective on pros & cons of using atem mini with or wihtout Software Video Mixer and Switcher (OBS, vMix, etc...)?
The atem by it self works great and software is not needed. The added software gives more features that are more user friendly or that do not exist with the atem alone like chat pop ups
Hi Ajay, Love your videos very helpful. I have been having an issue with the ATEM mini at my church. I have a PTZ Optics camera connected with a 150 Foot sdi cable connected to a Black Magic Design Bi-Directional Mini Converter. I had picture coming through the sdi converter for 1 service and now it does not show up anymore I have not changed anything at all to the set up after that. Also checked my ATEM mini and OBS by connecting a chromecast to check for video input but it did not show any video at all only audio I unplugged the ATEM Mini from power to reboot it and still nothing. It gets extremely cold in my church up here in CT its over a 100 years old no insulation in the walls. Could this have caused a problem the devices as well? Should I try to get them replaced. Please Advise anything would help thank you God Bless.
@@markcordero8589 Make sure you update the firmware for the converter. Also try to isolate the issue. Can you get video from the HDMI out from the PTZ?
@@AJaytheCEO I have not tried that the camera is mounted upside down. I cam give that a try later today. Through rtmp in vlc I do get a camera feed and it does work. Also the sdi cable is brand new just came in yesterday. I updated the firmware for the mini converter when I got it a few weeks ago and made sure the ATEM Mini is up to date as well.
thanks, but it was a little all over the place for me. I think people with basic live video experience would get it. Luckily I understood most, but still wasn't as concise.
Got the latest update and I can't get any sound to broadcast over live stream. What are some things to help troubleshooting the problem. I'm using a presonus 16.0.2 USB Board. Thx.
Thanks for the video! Do you have any ideas how I can rid of that hissing background sound when I connect my audio mixer directly to the atem mini using rca-3.5 jack cable? Is there any way to do it without a di box? And if not, which one would you recommend? Thanks, brother!
I did. I can hear all mics, piano, guitars ... and hissing noise on the background. In this video you have the same kind of noise when you went to play piano
Hi this was very helpful! I was wondering when you had your computer plugged in via HDMI to the ATEM's input for the lower thirds, what does the ATEM display? Is it acting like another display for the computer or does it just duplicate whats on your main monitor?
I have not done a long stream with the mini pro yet to see if there is still a delay but I am also recording through the mini pro as well so maybe they fixed it for internal recording.
AJaytheCEO I always take audio from the board to a camera with xlr inputs... then take audio from that hdmi on the mini.. that way audio and video are in sync. You have to be sure your camera inputs can handle line level, and you want to make sure your camera isn’t clipping the signal.. but it solves the sync issue!
I have just purchased a Atem mini pro for our church. We have only a Wi-Fi nest system available to use at the location of our equipment. How can I use this with our mini pro?
USB out to OBS, with OBS connected to your desired display, HDMI out from the atem to your other desired display, get a streaming bridge and you can stream to it for another display but it will only display the exact same thing coming out of the USB. Anything other than that it will not work with this device.
Hi AJ I just got an atem mini extreme I got it set up but I cannot stream to youtube. I have my stream key put in got video in pgm, and I hit the stream button and my switcher does not appear to connect to youtube even though the switcher says it is streaming at about 4.6Mb/s. my servise is 100 down 10 upload. did I miss some thing ?
Zoom would see the USB connected ATEM as the video and audio but there isn't a way to connect a network cameras to the ATEM they all need to be physically connected in some way
You are doing a wonderful job helping people like me to understand and make it possible for churches to do better work for HIS people. THANKS a lot for all your videos!!! GOD bless you more!!
Very helpful information. Please add Easyworship setup? Just brought the ATEM mini pro. Thanks
Hahaha, that is exactly the set-up i’m going to be using lol. I don’t think it’ll be too hard haha
I have similar setup. You do not need the usb cord, you can connect the computer to the switcher by IP address. That frees up the USB port to plug a storage device so you can use the record function.
I normally hook it up initially to make hardware changes that can't be done via ethernet
@@AJaytheCEO I was unaware that there was any setup you could do from usb that you could not do from ethernet. You just have to select the I intial connection differently. I ended up.using the usb and obs initially because the hardware encoder and Facebook did not play well together. Live was ok but after processing the sound was out of sync. Windows updates messed me up last Sunday's service so I tried the hardware encoder again and Facebook must have fixed it now it is ok. I also decided I wanted the usb to save the service to disk so if the streaming gets interrupted I can upload the service afterwards. I love your videos, Very informative and well presented. Thank you.
Suggestion, you really shouldn't take XLR balanced to unbslanced. out of the Ultramatch with a Stereo XLR Females to male jack to the line in of the ATEM.
The Ultramatch is a balanced out and the ATEM is unbalanced in. You have the wrong impedance.
You need to use a Di box in the middle. The XLRs coming out of the Ultramatch into the Balanced +4 dbu of the Di box. The Di box Line Level -10 dbV into the line level - 15 dbV input of the ATEM. Do not use an XLR stereo females to jack adapter out of the Di box.
Remember your taking professional high impedance equipment and connecting it to a consumer low impedance device. You need to have the two inverse phase and ground pushed into a single phase dual channel. This is the purpose of a Di Box using either active circuitry or passive transformers.
The Ultramatch is an Active source, so the Di Box needs to be a Passive Di Box
If you have a Passive Source output, than the Di Box needs to be Active. The ART Cleanbox Pro is an example of an Active Di Box.
For your situation it may be difficult to find a Passive Box with the inputs you need. In this scenario you may be forced to get the ART Cleanbox Pro. It's better than just having the cable setup you currently have to the ATEM.
You will also notice a discernable difference in audio quality while monitoring the ATEMs audio. Currently you have the inverse phase of the balanced signal being predominantly pushed to the left channel of the line level input of the ATEM. This leaves the sound dull, empty and at a lower signal decibal. With the Cleanbox converting down to unbalanced HiFi Line Level, you'll hear the sound filling both channels equally, fully and at full volume.
I know you may not be having any issues and may think that it's not worth it. However, Electromagnetic interference inside and outside your church will always fluctuate. You don't want to take a chance a loud or low hum will occur spontaneously during service.
Besides, the Cleanbox is cheap. About $80.
Thanks for that. That makes a lot of sense. I will look to add something like this at my church next week hopefully.
Any link to your suggestion? I see so many of these and don't yet understand the difference. Thank you!
I moved to an xlr to stereo cable
@@AJaytheCEO So now you are using a Dual XLR to 3.5mm Stereo?
Yes i am
AJay- you're a godsend man. We need more AJay's in the world today!
Thank you
a tip for proclaim! if you go to setting> Display and choose the foreground only. it will display the text only on a black background. alternatively, you can make your own custom confidence monitor display that say only shows 2 lines of text and instead of displaying that as a confidence display it as working as your lower 4/3 lyrics! hope that help if you need more info i am happy to help!
Thanks for that
@@AJaytheCEO no problem!
23:00 Now you’re just showing off😂😂. Thank you very much for an educative video
Not at all. I originally was one of the musicians and choir directors there
Routing the audio directly to the ATEM mini, it doesn't have the lag of the HDMI feeds, so it is slightly early (you're a musician so you must have noticed?). We have routed it through one of our cameras which has XLR input, and then use the audio from that HDMI stream as main audio, or can you insert a delay in the audio processor or mixer? We only have an analog out mixer with reverb, so we had to do it the simple way.
I love the way you explain every single detail. You do it with passion, patience and very clearly. Thank you for your videos.
Thank you very much!
This was so helpful. I've been struggling to really utilize our ATEM and even having some issues with basic functions. I'm so glad I found your tutorial as I now have a much better understanding of both the hardware and software.
Glad it was helpful!
HDMI Port 1 is specifically made for GAMING device for lowest latency and only has YUV Colors. 🙂
So helpful! Thank you so much! jay i love the thing you do for the lord god bless you
Glad it was helpful
Thanks for this video. You have been extremely helpful and have an amazing passion to share God's word through technology. Thanks again for the video, our Atem mini Pro will be arriving soon so can't wait to set it up!
Glad it was helpful!
Is there no end to your talents? Beautiful piano work Ajay!!!
The lords work!!
This was a blessing and a major help with implementing needed change. Thank you
Thanks. Glad it was of help
Thanks. It solved one issue, ATEM Mini Pro is more powerful than the ATEM mini.
Well, our church issue is that we don't have an Ethernet yet. As it has been neglected sometime ago and because of the lock down. I am thinking of using an i5 computer with an extra monitor, buy an ATEM Mini Pro and a Mevo camera using Zoom as our live streaming platform. We are hesitant for further investment, as if we don't have a working Ethernet connection, we need to use a WIFI hotspot. So if that's the case, we might perhaps use a mobile phone for Zoom Connection and share the video to make the mobile phone a cohost. This will be changed if we can properly invest an i7 computer. Our church desktop for PowerPoint Presentation may be antique. So, we need to consider that. Do you think using an ATEM Mini Pro with an i5 lap top (or i7 desk top) with ethernet will work with Zoom. I have an i7 desktop, but bringing it to church every Sunday will be very funny and exhausted. Thank you and looking forward to hear from you soon.
It would be very useful if you drew connections on a white board
Agree.
I am in shock that this guy can play the piano. I have been a subscribe for while and now know that he can play the piano. Mind blown
LOL thanks. I've been a minister of music for almost 25 years. Media has just been something I've been doing for the last 9 years
@@AJaytheCEO That is amazing
@AJaytheCEO so dropping a track soon..?😜
Thanks so much Ajay. I am having problem with the monitor too. It is not clear how you solved the same problem here. What did you change the frame rate to?
I finished setting up my brand new ATEM
MINI PRO ISO last night for service today. Except today I get to church and while setting up I think I may have changed a setting on the ATEM SOFTWARE CONTROL (1080p24fps) All of a sudden my monitor stops working and I am unable to use the switcher for service today cause I can’t see any of the inputs/preview/programme on the monitor. I have tried all the different video settings but the Monitor is still saying “NO SIGNAL”. But it was working fine last night. I have tried everything (restart ATEM MINI PRO, COMPUTER, RESTORE ATEM MINI PRO ISO through SOFTWARE CENTER by going to FILE -> RESTORE). Please advise what to do! Obviously a bit down I couldn’t use my ATEM MINI PRO ISO for the first time today.
What monitor are you using again with your atem?
Hi AJ, can you please do a more comprehensive setup instruction. I feel like you are assuming that I know some of the connections etc. And there is way too much movement compared to how you normally do your videos. Is there away the you can actually show the connections, software, how to set it up etc. Right now it's like you are assuming that I know. Thank you and i look forward to seeing the redo.
I would invite you to visit this series of videos as this one does do some assuming
ruclips.net/p/PLfNVqWlknkogGVVQ14_5SVrwrvjiyxJA5
Can you do an updated video on this, where you go over setting up an output out of propresenter for full screen lyrics and scriptures using 2 line slides in the congregation and have the same slides display at the bottom of the screen on top of the video on the streaming feed in the atem mini Pro
I have a similar video explaining this setup but you would not be able to do both just with the atem mini pro. You would need something like OBS, vmix or some other additional switcher software to manipulate this type of workflow
I live stream for my church using OBS. I use a separate monitor with a PowerPoint for scripture verses and OBS captures that screen as a source. Can I show or capture these verses in the same way with the Atem mini pro??
Technically you would just send your second screen to the ATEM instead of a physical monitor and then it would work by you selecting that input on the ATEM instead of screen capture.
I am getting ready to order an ATEM mini pro for our church. Was wondering if you have an affiliate link for one. Since we going to buy it anyway why not help you out. Thanks.
Here you are and thank you
amzn.to/3xup8pa
So helpful! Thank you so much!
Glad it was helpful!
This probably isn't the place, but here goes. Do you keep your ATEM Mini plugged in all the time? I had 2 units now that on initial setup work as expected. After leaving everything connected overnight the computer no longer recognizes the ATEM as a webcam via the usb-c out port. I tried connecting it to 3 different PCs and none of them recognized it. The first unit went back to Black Magic support and they were unable to fix it and sent a new one. They are now sending me a third unit. I want to do what I can to keep it functional. It seems like if it was a power surge that more than the usb-c out port would be affected. Any thoughts?
My atem is plugged into a smart switch which kills the power when not in use. So it acts like a power switch. I have not had any issues with it. I've done this same thing even with their bigger switchers since they have no power switch
@@AJaytheCEO Thanks for the reply. I so want this switcher to work as it will make the Zoom experience for our congregation much better. I am completely baffled as to what is happening and that it happened to two units.
@@motownk Sounds like a surge from the computer's USB or power going to the ATEM. You have everything connected to surge protectors right? If not, they should be.
@@AJaytheCEO yes two laptops, an hdmi splitter, a video camera, the ATEM mini pro and an external monitor are all plugged into a surge strip.
Good Job AJ. Thanks for the tips for DSK Powerpoint.
You are welcome
You mentioned DSLR cameras, but DSLR cameras show the boxes and icons within your recorded stream.
You need to have a DSLR that offers clean HDMI output
Dude this was the video that I was looking for. Thanks so much!
Glad I could help!
Using ATEM mini will eliminate the need of a mini recorder? Sorry for my ignorance! I’m still learning here. TIA!
I possible could but it all depends on your setup
Hey AJ, I have a church setup that is driving me nuts. Not sure if I have a defect in my Atem or it's working as designed. I have two mixers; one for the loft/choir mics and one for the house mics. What I want to do is connect one mixer output (choir) to the mic 2 input on the Atem and the house mic mixer outpout to Mic 1 input on the Atem. What I'm finding is I can't mix the mic inputs. I can hear mic 1 but not mic 2. I know that both inputs are working bc I can move the input from mic 1 to 2 and the audio follows just fine. And it's not a cable issue, I've substituted and still have the problem. HELP?
Please email me questions@ajayholmes.com
thank you so much AJ
You are very welcome
I want to ensure I understand correctly. Could I purchase this instead of buying an individual capture card?
Yes that is correct as this will show up as a capture device to your computer
brilliant job! thx
Glad you liked it!
What's the name of the portable monitor please
Hello, Congratulations. Cool 👍
Thank you! Cheers!
Great job, thanks for the time and effort in this. Helpful!
You are a man of many talents (pianist)! Great job! Thanks for the video. I am helping out a church with their install of their ATEM Mini Pro. This was so helpful! Keep it up bro!
Thank you. Glad to be of help
Can I use usb type C to output feed to various TV's around the church ?
Great video! Can we livestream RUclips & Facebook at the same time from ATEM mini pro?
With restream or with a computer using the USB output
For the DSK, would we need to run another presentation software with a black background if our current presentations uses a video background for the congregation? Or is there a way to use the DSK to allow one presentation with video background to be used for both the congregation as well as livestream? Currently we're doing picture-in-picture mode because our presentations have video backgrounds and we're unsure as to how to use the DSK so the text only shows on stream.
What presentation software are you using? Propresenter 7 allows you to run 2 separate outputs with different formatting that would work
@@AJaytheCEO Currently Easy Worship.
Great Demo!!!
Thanks
Thank you! - Question: When you connect to the USB-c port to record (via SSD or SD card), how then do you connect to the computer for what BMD calls "webcam out, software control, software updates and panel connection"? Does the hub allow you to both/simultaneously record (SSD or SD) AND connect via the USB3 port to the computer to connect with the Control Panel, etc?
No you can't do both
I also use ATEM Mini in my church. There’s a problem tho. Like you, I don’t use Blackmagic cameras to the ATEM Mini and the ATEM software won’t let you do color correction if your cameras aren’t Blackmagic. Without color correction my cameras look bad. I’ve tried using the OBS’ color correction, but the problem is OBS’ color correction read cameras that went through the ATEM as one input, so I can’t put different color correction for each camera. Do you have any suggestion for this issue? Thanks in advance
Not exactly sure about a work around for this
@@AJaytheCEO thank you for your response :)
Thanks for the content! I have an Atem Mini and will be connecting it via my local network. Do I still need the usb connection for streaming software like vmix?
If you are using vmix yes but if not, it is good to keep as some settings require a USB connection
Hey Ajay, My video has stop showing on the TV's in the church. We're using Dell computer, windows 11, 32Gbs ram, GeForce RTX 4060 Ti , Propresenter 7, and the Item mini pro. The PTZ cameras are connected to a 250 watt POE. The is a splitter connected to a the display port in the back of the computer. From the splitter we are running about 100 feet of HDMI cable. Is the splitter stopping the video or is it the length of the HDMI. Do we need an HDMI extender? I do see everything on the computer monitors, but nothing sent from the cameras to the tV's. Help please.
I'm not sure but if the cables are the issue I would buy 1 fiber optic HDMI just to test it out
@AJaytheCEO Are there issues with long lenght hdmi cables.
Fiber can go 300ft without any issues
@AJaytheCEO Thank you. Next week have an hdmi coming from the video out of the Atem Mini Pro to a n hdmi splitter. Should we have that?
@Editor1206 yes
Hi Ajay, thanks for your video how do I get a live picture on big screen? As live
Thank you sir... Please where did get the output that links to the Atem mini please? Did you get the output directly from the mixer? God bless you sir
My setup was a bit different in our main sanctuary but you can come out from the mixer directly
Very helpful...unfortunately, the HDMI out on the Atem doesn’t work with my current monitor... Any ideas ??
It is most likely the frame rate. Change that in your ATEM software to see what is supported
@@AJaytheCEO Thank you sooooo much, it worked
Can I ask a question please
We have just had a brand new stem mini pro system installed
It refused to accept channels 3 and 4 and if we add a hdmi from the computer it cuts the feed to the screens
Any ideas
God Bless
N
how do I display the program view from the mutilview to the projector screens in the church without the entire multi view showing? I need the multi view for myself in the studio but don't want the congregation to see the mutliview. I 'm using hdmi to connect to the projector screens on the walls
I think I have the answer, but I will ask anyway!
I am using Proclaim. If I have the words as you showed on lower third for live stream, is there a way to put it full screen on our screens at church, or do we need proclaim on two different monitors...One for in church and one for online?
Thanks!
I'm not sure. Which version are you using
@@AJaytheCEO Thanks for checking. We have Proclaim Standard On Air License - 1-99, and Proclaim Pro Media - 1-99
If we can, but we would have to upgrade, I would love that insight too! Thanks!
This video is so informative, currently budgeting for the mini pro but our idea is to connect 3 cameras, and type c for webcam and embed the graphics via Easyworship then projection, we intend to record the clean switching without graphics to edit later for our tv program and social media, and the HDMI out to Multicam. What's your opinion on this and what did you use to get the longer hdmi connection?
Question: I have an Atem Mini Pro. I am having an issue where I can't seem to get rid of whats on my camera's LCD screen when it goes through the ATem. Is there a setting I'm missing to get rid of what's on my Sony's LCD screen in the ATEM? I try to do it on my Sony Camera but I can't get rid of everything STB will always remain or battery. Now a capture card works to completely get rid of everything but I was hoping not to have get 3 or 4 capture cards to work the Atem. Is there a setting I'm missing on the Atem that will fix this? Thanks in Advance!
This will be done all in your cameras. What type of Sony are you using? Sounds like a clean HDMI output setting needs to be turned on
@@AJaytheCEO Thank you! It's a Sony FDR AX 100. Yeah the capture card takes care of it but the Atem doesn't. Clean HDMI output is a new term to me. I will check into it. Thank you!
What brand/model is the monitor you are suing for the multiview? Are you going HDMI to USB C?
I am using a Samsung 24inch pc monitor and the model isS22F350FH and I am not sure about HDMI to USB c
@AJay, I saw a video where you spoke about Proclaim and the ATEM Mini Pro. My struggle is my live stream is all done in my chrome studio. It’s all green so all my cameras show green. In order to make my streaming work all three cameras need chroma keying. ATEMMini Pro only give one upstream key. There is a program called ATEM Plus Chroma Switcher by atem.satplus.cz , this works great. However it conflicts with my computer.
1. Is it possible for me to add both to the Elgato stream deck XL. If so can you guide me through the process. I have companion down loaded and H2R graphics.
2. As it relates to companion and H2R graphics, I followed your steps and I have my ATEM cameras on my stream deck. How can I add companion and H2R graphics. Is it through the OSC (generic) or can it be done through The Elgato stream deck. Could you please assist. The videos are good yet my challenge is my chroma studio..
Any advice on removing the "white noise" during the portion where you were playing the piano?
That was because of the computer audio being unmuted. We always get that because of the rca cable going into the sound system
Looking for that video you were going to tag about setting up the vimeo stream
Haven't made it yet
Please make an EQ and Dynamics video next.
I'll work on that
The USB-C was connected to the live stream computer? Was it usb-c to usb-c?
That depends on the computer if it has a USB c connection. I have used both
God bless you
Hai bro.. I m a Church pastor..i newly using Atem mini pro.. I dont know how to connect ppt in Atem mini pro..even i dont know direct streaming in atem mini pro .. Can you explain to me
can you turn on dsk on the atem? or only on software?
Not on the atem mini pro. It is only available directly on the mini extreme
i can t take sound from a mixer where i put the cable on phone? should i search for something like rec out or is working with phone to? i need to install atem mini software and change to line and can i use the phone out from mixer?
Well done! Thank you!!!
This was great, thanks!
Do you have any issues with latency? If so, how do you recommend getting rid of it?
I do not but what type are you experiencing?
how do you get around not having multiview for any cameras, just having the ability to output the main video from the HDMI?
Is the mini pro able to live stream and use the usb out to connect a projector in live set up? New sub here
Yes but you would connect via the HDMI to connect to your projector and the the mini pro can stream out by itself
@@AJaytheCEO Great video. That was my question too, but it remains unclear for me where the Multiview monitor is then connected id USB is for recording and HDMI for the Projector ans Ethernet is for the livestream.
@ajaytheceo Did you give out a personal vimeo streamkey?
It expired when I ended the stream.
Great job AJ. Appreciate you. Question. Haven't installed the Atem Mini Pro in our church as yet (waiting for a few more pieces), but if we connect our presenter laptop (presenting EW7), how does that affect what the congregation sees?
If connected to ATEM Mini, they will see exactly what your live stream will see
Blessings. Is there a way you can setup Atem mini pro automatización? instead of hitting the on button for the sound to come on the live all the time. Just set it up so that it will start recording with sound automatically
Please. I would appreciate it
You can't reprogram those buttons but you can make a macro to do that
Atem Mini , Can you have the HDMI out set to record and split that signal into a monitor and a pc or recording device, will it do both from that port ?? Thanks
Sadly no it cannot.... natively. I have a work around for that. Video coming soon
Hi. How we can disabled/kill/remove that background sound (noise) when you played the piano there’s a sound like a ground something like that, I have that issue on my church. Thanks.
That sounds like a grounding issue. What type of cables are you using?
Use a passive di box with the ground lift switch set to lift
Hi Ajay
So I have a question about the Atem mini pro .so recently we bought an Atem mini pro and a blackmagic studio camera 4k pro so I tried to stream in OBS using Mac mini m2 but when I opened the OBS it turned that the image have dropped all the quality the image was bad so I tried to decrease the quality from (4k to 1080)on the blackmagic studio camera but it didn’t help
So I would like your help thank you
Your computer is not fast enough for 4K nor can the atem mini pro accept 4k. Set the camera to 1080p and try to run your stream directly from the atem to see if it is your network or your equipment. if it works then your bottleneck is the mac
@@AJaytheCEOso I tried to get it to 1080p but it still the same bad image and I changed the cable but nothing happened
Hi AJ, first of all, thank you so much for your videos on Atem Mini & Mini Pro. I actually bought both models as well. I started with using the Atem Mini Pro about 3 weeks ago, love the multiview function, but for some reason, the HDMI output stopped working. It was OK the first 2 weeks, but all of a sudden it stopped working yesterday. I've been using the same setup, same equipment and even the same cables. I noticed around 9:00m, you faced the same issue yourself, but you had it fixed at around 11:24m by switching the video output. I changed mine too, but still doesn't work. What do you the could it possible be ? I read from Blackmagic's forum, a guy actually changed the power adapter from its original 3 amps to 5 amps. Do you think it's advisable ?
Can the ATEM pro stream to multiple social sites at the same time, ie..Facebook/RUclips?
Only through a service like restream, split stream, castr, etc
Thanks
Were you able to split the usb-c signal? Im looking to use my sandisk and livestream via my computer at the same time?
Sorry no you can’t do that
We have the ATEM Blackmagic mini connected to our sound system (Sound Craft), but when the organ or any music plays, it sounds garbled. However, the voices come out fine. Can you please help me to correct this problem?
Do you have a sample video of this?
@@AJaytheCEO Yes. Here's a link to one of our videos: ruclips.net/video/khwWKQw3nZs/видео.html
Thank you!
You probably have your mic set on mic and it needs to be changed to line in settings. That’s what the recording sounds like
After viewing many youtube videos on live streaming, especially for small churches, what is your perspective on pros & cons of using atem mini with or wihtout Software Video Mixer and Switcher (OBS, vMix, etc...)?
The atem by it self works great and software is not needed. The added software gives more features that are more user friendly or that do not exist with the atem alone like chat pop ups
Is there a way through easy worship, to have presented to the church as a full screen and lower thirds presented to the live stream using Atem?
I am not sure. What version of EW are you using?
@@AJaytheCEO ew7
Thank you. Do you use 2 separate pro-presenters one for in person and one for online (lower thirds)?
No I do not. Only one
You can set up PP7 to do one screen for in chapel and one to do lower thirds. I think they call it “looks”
How did you add Vimeo as a custom Platform? I only have Facebook, RUclips, & Twitch as options.
Here you go: ruclips.net/video/fZaTGwIBExk/видео.html
Perfect. Thank you.
Hi Ajay, Love your videos very helpful. I have been having an issue with the ATEM mini at my church. I have a PTZ Optics camera connected with a 150 Foot sdi cable connected to a Black Magic Design Bi-Directional Mini Converter. I had picture coming through the sdi converter for 1 service and now it does not show up anymore I have not changed anything at all to the set up after that. Also checked my ATEM mini and OBS by connecting a chromecast to check for video input but it did not show any video at all only audio I unplugged the ATEM Mini from power to reboot it and still nothing. It gets extremely cold in my church up here in CT its over a 100 years old no insulation in the walls. Could this have caused a problem the devices as well? Should I try to get them replaced. Please Advise anything would help thank you God Bless.
Honestly, cold helps electronics normally but are you able to get video if you connect the converted hdmi into a tv?
@@AJaytheCEO No I do not get any video even if I plug it into the TVs we use in the sanctuary
@@markcordero8589 Make sure you update the firmware for the converter. Also try to isolate the issue. Can you get video from the HDMI out from the PTZ?
@@AJaytheCEO I have not tried that the camera is mounted upside down. I cam give that a try later today. Through rtmp in vlc I do get a camera feed and it does work. Also the sdi cable is brand new just came in yesterday. I updated the firmware for the mini converter when I got it a few weeks ago and made sure the ATEM Mini is up to date as well.
@@markcordero8589 hmm not sure about that then. Did you ever get an image over sdi?
thanks, but it was a little all over the place for me. I think people with basic live video experience would get it. Luckily I understood most, but still wasn't as concise.
Ok
Got the latest update and I can't get any sound to broadcast over live stream. What are some things to help troubleshooting the problem. I'm using a presonus 16.0.2 USB Board. Thx.
Confirm audio is routed to the output used to connect the cable to the ATEM. If you hear audio then confirm the ATEM is set to line and is on
Thanks for the video! Do you have any ideas how I can rid of that hissing background sound when I connect my audio mixer directly to the atem mini using rca-3.5 jack cable? Is there any way to do it without a di box? And if not, which one would you recommend? Thanks, brother!
you need to change the input on the ATEM to line instead of mic
I did. I can hear all mics, piano, guitars ... and hissing noise on the background. In this video you have the same kind of noise when you went to play piano
@@denisiunusov969 Then that is something from your mixer. Do you still hear the hiss through headphones coming from the mixer?
Hi this was very helpful! I was wondering when you had your computer plugged in via HDMI to the ATEM's input for the lower thirds, what does the ATEM display? Is it acting like another display for the computer or does it just duplicate whats on your main monitor?
It acts as another monitor
@@AJaytheCEO Thank you!
Hi Ajay, how's your sound from the Mixer perfectly synced to the video from the AtemMiniPro? I didn't see you adding any delay.
I have not done a long stream with the mini pro yet to see if there is still a delay but I am also recording through the mini pro as well so maybe they fixed it for internal recording.
AJaytheCEO I always take audio from the board to a camera with xlr inputs... then take audio from that hdmi on the mini.. that way audio and video are in sync. You have to be sure your camera inputs can handle line level, and you want to make sure your camera isn’t clipping the signal.. but it solves the sync issue!
Can we use the ATEM mini with easy worship for live streaming?
Yes
I have just purchased a Atem mini pro for our church. We have only a Wi-Fi nest system available to use at the location of our equipment. How can I use this with our mini pro?
You need an Ethernet to wifi adapter: amzn.to/3qcZODo
@@AJaytheCEO Thank you I will probably have more questions as we go forward with our streaming plan
Can you do the control over network
yes just plug it into ethernet. make sure that the ip address is different
from your computer tho or it will not work
Yes you can. I was controlling it that way in this video.
Hi AJ,
Any work around to generate 2 output without costing too much?
USB out to OBS, with OBS connected to your desired display, HDMI out from the atem to your other desired display, get a streaming bridge and you can stream to it for another display but it will only display the exact same thing coming out of the USB. Anything other than that it will not work with this device.
@@AJaytheCEO thank you. I was looking to get two separate displays.
Do you need a mouse/keyboard for the preview monitor that’s connected to the Atem?
no you do not
Hi Ajay, Can we use a standard Dell laptop with ATEM Mini Pro for live streaming?
Yes you can but the Mini Pro will do all of the live streaming for you so the laptop will not be needed to actually live stream.
Hi AJ I just got an atem mini extreme I got it set up but I cannot stream to youtube. I have my stream key put in got video in pgm, and I hit the stream button and my switcher does not appear to connect to youtube even though the switcher says it is streaming at about 4.6Mb/s. my servise is 100 down 10 upload. did I miss some thing ?
Does anything show in RUclips studio?
@@AJaytheCEO youtube studio keeps circling trying to connect.
It really is
Hey hru ajay how do I go about getting in contact with you? I had a email and never could get it to work. Please advise thanks
Email me at questions@ajayholmes.com
How would I set up if I wanted to use Zoom and a network connected ATEM MINI Pro and an Iphone as the Camera feed?
Zoom would see the USB connected ATEM as the video and audio but there isn't a way to connect a network cameras to the ATEM they all need to be physically connected in some way
What device is needed for projector/screen show with this mini atem pro
What do you mean by projector/screen show?