While I'm running ProPresenter, OBS and the Atem Control Software on the same computer for this demonstration, I DO NOT recommend doing this in an actual production environment. Run ProP and OBS on separate computers. You'll probably be fine running the ATEM Control Software along side either of those.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Does the Atem Mini Pro change your thoughts on this recommendation? I would like to use a a Mac Mini to run Propresenter 7 to send via HDMI to our Mini Pro which will upstream through an Ethernet internet cable to livestream on our RUclips channel.
Ballast Media In this case you are using one laptop for the ATEM software, propresenter & OBS, using the hdmi, vga & usb output. What if for your presentation laptop, you are already using the only hdmi output on your computer to display on a projector? Can you use an HDMI splitter to send to both the projector AND the ATEM switcher from the same computer? Thanks!
I have one MacBook Pro for Streaming and another for presentation. When I run presentation MacBook into the atem mini, I am getting a buzz in the live stream. Any suggestions
Came here after the audio management video for the atem mini, never thought about overlaying lyrics on top of video, always just switched to an alternate input running powerpoint. Going to give this a try before my next conference. Awesome content man.
Great video! I am helping our church to start a media ministry and your channel has been a huge help to get us there with all the instructional videos you put out. Thank you and God bless you!
Thank you so much for this. As a beginner into all this, I was able to get my hands on one of the firsts ATEM mini pro in Sweden. I have since then spent more time than my kids on youtube trying to learn how to do all this. And still, no one can explain this the way you do it. Thank you so much. And every day I have hoped for the release of the fourth version and today it was there.
Thanks very much for this video! I have been looking for this for ages. This answers my questions. I will be setting this up for my church using Worship Extreme
Hello Mr Steve. I just discovered your channel and what a genius. Your explanation of the Atem Mini is so knowledgeable. Thank you and God bless you for sharing your knowledge
Hi Praise the Lord I am really thankful to you and God for helping us online learning about Black magic switcher in cameras. This is Pastor Akashdeep Sharma from India I need more help I want to start a online TV channel 4 hours everyday for that I am planning to use to black magic 4K and ATEM Mini with overlays logo on prerecorded Sermons, interview and more programs to share Christ. On RUclips and Facebook and latter on broadcast TV if you have made any video about this all please share the link with me it's not please help me. this is Pastor Akashdeep Sharma from India
Hello sir, I really glad that I´ve seen your videos and I knew that God used you for His glory to work with. I thank God so much when I met you here. At our church we would like to do that but we have not so much fund for that. So we pray for that if God give us to do that as soon as possible. Thanks so much.
Last time I watched your video, I was still waiting for my Atem. Now, I got it and already streamed several events. Nice thing! Thank you very much for your videos!
ive decided the best way to do this is to run the atem output through a computer with ProPresenter and let ProP do the streaming. Can either use the atem as a web cam or you can use atems hdmi out into computers hdmi caputure so you can still use the ISO recording on the atem’s usb c port. No keying required. With ProP at the centre of operations you got a lot more power and you dont need to deal with ATEM’s awkward clunkiness. I dont have an atem extreme yet but that is the goal. then i will use Mix Effects to use it’s super source capabilities with ease (came out long after this video was made). Im assuming pro presenter didnt have streaming at the time this video came out.
Can you do a short video about overlay using Powerpoint? I know a lot of small church using PPT and can afford to switch to ProPresenter (cost and re-train staff). Thanks
One snag I ran into was that I couldn't get any input from any PC into the ATEM. I had to go into a windows advanced super nitty gritty display properties menu and then change my output settings to the correct framerate etc to get the feed to show up, per a different tutorial video. Might be worth mentioning.
My ATEM mini is not being recognized by Camtasia 2020 or OBS. the screen looks blank The webcam and Blackmagic show up as options. The 920E works fine, but eh aTem Mimi is blank. I have called Blackmagic they say call OBS or Camtasia Camera Sony Handycam cx455 Nikon D750. Any suggestions?
The Atem Mini does not support NDI, but if you take the video from the Mini in to a computer, then you can use a program like OBS to combine in NDI video.
Great video, I just wish I could find a ATEM Mini. It looks like there might be some online, but I just don't want to buy something and wait two months for it...
hello sir i want to ask how to set atem mini pro and easyworship for live streaming but the live streaming only uses atem mini pro not using obs please help me sir i really need your help sir thank you sir god bless you sir
How do you connect your lyrics and video showing together on obs I thought you used different capture, so how did you mix the two together from your obs or from your ATEM mini ?????
Love your videos man! You explain everything so well! I do have a question regarding the ATEM Mini that I can’t seem to find the answer to anywhere. If we had an ATEM Mini Prowith 2 cameras and our pc using 3 of the inputs, can I use the 4th input to daisy chain an ATEM Mini and add 4 cameras to that? The way I’m thinking....the camera selected on the secondary mini will show on the livestream when the 4th input is selected on the main mini pro. Hope you get what I’m thinking.
Yes, you could do that. It will most likely add a noticeable amount of latency on that input. In other words, from input to output of the Mini will have a certain amount of processing time, so the cameras coming from the sub-mixed Mini would be further behind in time then the cameras coming in directly.
Hello and thank for your very well explained videos. Would you happen to know if this lyric presentation will work with Proclaim? Our church uses Proclaim since it does have the ability to set up volunteer users with ID’s, so they can log in from home to set up each service. Since most of our volunteers are young and dont drive and have to wait for parents or some adults get out work late. I dont know if Propresenter has that feature yet. Thank in advance.
Looking for a low cost camera option for the Atem Mini Pro switcher. Do you have any suggestions? We plan to mount 3 cameras. We don’t have the budget yet to buy a camera that we can control the zoom.
That's what this is for. The presentation software can be used at the same time to display lyrics in the venue as well as generate the overlays. Take a look at the videos earlier in this series on the ATEM Mini for how to live stream from the Mini.
I get down a bit of a rabbit hole when trying to decide a computer to purchase that could do this. I'm not overly tech when it comes to the computer portion. We have the atem mini pro up and running and would like to add lyrics. What are the specs of your laptop?
Hi Steven! Great video as usual! could you please explain the advantaged of the Propresenter over a simple app like keynote or powerpoint to prepare my lower thirds and lyrics? It is not that clear to me why propresenter is better that the other options really available on practically any MAC or PC. Could you explain it a little more? Thank you
Hey Steven. Thanks for the video. Quick question for you. If we're switching between lower thirds and pulling the full projector image (eg, a video being shown to the church, or the pastor using a power point) In the event we don't want it to be in the lower thirds anymore, would we need to set up another 'output' from ProPresenter and have a switch going into the 4th plugin on the Mini? Assuming the other 3 inputs are being used for cameras?
Yes, but that requires 2 inputs, a key and fill signal. That's called a linear key. So if you want to use 2 of your inputs on a 4 input switcher for your key, then yes you can do that.
Is it possible to have lower two third shown on multiple video with only 1 upstream key ? Cam 1 - Video Cam 2 - Video Cam 3 - Video Cam 4 - ProPresenter lower 2/3
Not sure I understand your question? You want to switch between the camera 1-3 while maintaining the lower third from ProPresenter? That's what I demonstrate in the video.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Steven thank you for your video. I got my atem mini and a MacBook pro. What is the best way to record the video utilizing atem mini to my computer without losing resolution? I tried OBS but i lose a lot of resolution compared to when the video is recorded straight into my camera. Your video looks really nice, how did you recorded?
It's the bit rate setting. For streaming we set it between 2500 and 6000, but recording should be more like 12,000-35,000. Your camera probably records at a bit rate between 28 and 50 thousand.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Hi there. I’m using the software called Proclaim. How can I create a graphic with alpha channel and gray to create a linear key out of Proclaim. I’m trying to make a transparent lower third. Is it possible with my computer and software to create a linear key using atem extreme?
Hi Stephen, I have a camera connected with an hdmi cable that works only on input 1. But i need it on input 3. the same set up doesn't work on input 2 or 3. 4 is already designated for L3's. The cable length if 40 ft. Thanks
Woww..sir Im looking to buy atem mini pro for live streaming some record programs..it's enough for purposes? And can you please suggest good laptop or laptop spec for connect with atem mini pro
Very informative video. We used our for the first time Sunday. We had issues. Has the audio sync video come out yet?? I noticed Sunday that our video and audio did not line up well at all. We tried syphoning our lyrics from Pro 7. The syphon and audio lined up perfectly, but the video lagged behind. I am not sure how to fix this really. I plan to try NDI tomorrow. If that doesn't work, I will go will the settings mentioned in this video. I also found a few features that could help lessen the workload on our iMac to hopefully help the lag. With that said, our youth ministry uses OBS Streamlabs and the ATEM, and it is synced up well. They do not send lyrics though. Any ideas on what the issue might be? Do you think we overloaded the cpu running pro 7 and obs causing the video to lag? Do you recommend NDI? We have the ATEM mini pro
Any number of things in the chain can cause an audio/video sync issue. You can try and just do a time alignment - there is actually a delay in the ATEM now so you can delay the audio by frames. but I show you how to measure the alignment in this video, but don't make the change in OBS, make the change in the ATEM: ruclips.net/video/UCmr0KwbXxA/видео.html
thanks for this video, which is helpful for the initial selection and set up for the options (luma, chroma and mask). But, during a service, how do you set up for the numerous “slides” for the lyrics? For example, for the opening/welcoming song, there could be a refrain plus three verses. So how to switch from verse 1 to refrain, verse 2 then back to to refrain, etc., while possibly switching camera angles as well? Thanks in advance!
I don't believe there is a way anymore unless you already have the module. And purchasing the module you need would cost more then upgrading. So, upgrade to 7.
Ballast Media thank you! We ended up just using an upstream Luma flying key to display the same image from the house. Not what we want overall, but achieves the feel until we upgrade. Thank you for your videos and for your response! Blessings!
How are you sending your lyrics to the Atem? PP6 doesn't do multiple formatted outputs without a purchased add-on, so you'd have to use something like the stage display to send a black-background with your lyrics to the Atem. (They don't sell the add-on anymore because it cost more then upgrading to PP7)
You can only do multiple outputs with PP6 if you have the multiple output module. If you don't already have that module, you can no longer add it (it cost more then upgrading anyways).
We are using the Chroma Key option, but in Pro Presenter, when you click the clear slide button, the screen will go completely black. You will only see the video underlying, if you have text on your slide. In between songs, the tech clears the slide lyrics, and then all we get is a black video on the feed. Do I need to have the Video Input option turned on, in the Looks panel? I only have the slide option selected.
No, don't use video in the look. It doesn't seem like your chroma settings are correct on the ATEM. Black should be transparent, so if you have no words displayed, it should show everything from your camera, overlaying nothing.
These videos have been so helpful in upgrading our video content on a budget. Thanks for that! Our soundboard, cameras, and media computer are all in the sanctuary, but currently our recording and live stream PCs are in another building. My thought was to get the Atem Mini Pro set up in the sanctuary and have our producer just control the Atem from the other buildign using the software. But as I've found out, the issue here is that the producer doesn't have access to the multiview monitor (since I can't send the HDMI out signal that far). Do you know of any solutions aside from something like a HDMI to fiber converter to send the HDMI out signal a fair distance? Am I just missing something easy within the Atem Mini Pro?
How far is the distance from where the ATEM Mini Pro will be and where the operator will be? If you convert the HDMI out to SDI you can run that up to 300+ feet. Then just convert back to HDMI and connect to a TV.
Not tying to overlay lyrics, I just want to screen mirror. We have a Mac connected to a 2 way splitter. One side to a projector, the other side to a stage monitor. That all works fine. The stage monitor is no longer needed I unplugged the HDMI cable from it and plugged it into Cam 4 slot on the mini pro. This however did not work, any idea why not?
Try it in CAM1 input. Sometimes the Atem Mini does a better job of adjusting to a computer input on input 1. But, that being said, also what resolution and frame rate is your computer output set to?
So I know this may be a dumb question. So we have an atem studio 4k. We run four cameras via sdi in and then run a dedicated out on our mac studio to it as well. I get how to do the lower thirds for lyrics but what about after the worship through music and the pastor has a powerpoint that has been imported into pro presenter how would that get handled.
Usually I run both the "lower third" output from the computer, and the main screen output to the switcher. So, during sermon when they use full screen slides, you can switch to that in your video as well. That is usually the simplest solution short of generating two sets of content.
Hi. I have a question, I’m using chroma key my source is hdmi 4 (PC), hdmi 1,2,3 are cameras, when I turn on Key on the switcher I saw the lyrics but when switch to another camera the Key turn off. Can you help me to identify the problem. Thanks.
Fantastic video: I currently connect my laptop (ProPresenter) to a 3 way HDMI splitter to connect my laptop to the 3 TVs in the church. I will like to replace the 3 way HDMI splitter with a 4 way HDMI splitter so that I can connect the 4th HDMI output in the HDMI splitter to one of HDMI in in the ATEM MINI PRO ISO (installing a multi camera set-up at church for the first time) and want to maintain my current laptop to connect to the ATEM MINI PRO ISO, problem is it only has one HDMI slot. Will this work?
If this set-up doesn’t t work then can someone tell me how to make this work since My problem is I only have one HDMI output on my laptop. So how can I get two HDMI outputs from my laptop to the HDMI splitter as well as the ATEM MINI PRO ISO?
Are you wanting the same signal from the laptop sent to all these destinations? or are you trying to get 2 different display (content) outputs from the laptop?
I am also interested in trying this set-up: I will buy a dongle that has an additional hdmi port, so I will end up with two hdmi output ports. The one that comes built in with the computer and the one that comes with the dongle. I will use one for the 3 TVs (3 hdmi splitter) and one for the ATEM MINI PRO ISO (Lower thirds from ProPresenter 7). This should work right?
In the Atem Setup program there is an option to change that functionality. Not sure why it defaults now to turn off with transitions, but you can change it.
When I'm putting the lyrics in an overlay using either luma or chroma key the lyrics go away every time I switch the cameras. if I hit that camera button again they come back, but this leaves a flash at best. This is annoying because I don't want to be stuck to one camera shot during praise time. Is there a way to get it to leave the lyric overlay up, regardless of what I do with the main cameras until I turn it off? I'm using an ATEM mini Extreme.
If you are using the upstream key, put the second upstream keyer on the preview bus (with the same key source) now when you switch you'll be switching back and forth between the keys, but to the viewer it just looks like the key is staying on.
![BabyChiefDoit - Too Slow (feat. STAR BANDZ) [Official Music Video]](http://i.ytimg.com/vi/zayaxws7RPg/mqdefault.jpg)
While I'm running ProPresenter, OBS and the Atem Control Software on the same computer for this demonstration, I DO NOT recommend doing this in an actual production environment. Run ProP and OBS on separate computers. You'll probably be fine running the ATEM Control Software along side either of those.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Does the Atem Mini Pro change your thoughts on this recommendation? I would like to use a a Mac Mini to run Propresenter 7 to send via HDMI to our Mini Pro which will upstream through an Ethernet internet cable to livestream on our RUclips channel.
@@jonfebus2724 Yes, definitely go with the Pro. It's worth the extra cost to be able to stream without a computer.
Ballast Media In this case you are using one laptop for the ATEM software, propresenter & OBS, using the hdmi, vga & usb output. What if for your presentation laptop, you are already using the only hdmi output on your computer to display on a projector? Can you use an HDMI splitter to send to both the projector AND the ATEM switcher from the same computer? Thanks!
I have one MacBook Pro for Streaming and another for presentation. When I run presentation MacBook into the atem mini, I am getting a buzz in the live stream. Any suggestions
Our church streams are about to be on a whole new level!! Thank you and God bless you!!
this is by the far the best explanation of exactly what i needed on all of youtube
Came here after the audio management video for the atem mini, never thought about overlaying lyrics on top of video, always just switched to an alternate input running powerpoint. Going to give this a try before my next conference.
Awesome content man.
Great video! I am helping our church to start a media ministry and your channel has been a huge help to get us there with all the instructional videos you put out. Thank you and God bless you!
Thank you so much for this. As a beginner into all this, I was able to get my hands on one of the firsts ATEM mini pro in Sweden. I have since then spent more time than my kids on youtube trying to learn how to do all this. And still, no one can explain this the way you do it. Thank you so much. And every day I have hoped for the release of the fourth version and today it was there.
This is awesome, the end of weeks struggling with lyrics on streamyard, thank you!
Thanks very much for this video! I have been looking for this for ages. This answers my questions. I will be setting this up for my church using Worship Extreme
Hello Mr Steve. I just discovered your channel and what a genius. Your explanation of the Atem Mini is so knowledgeable. Thank you and God bless you for sharing your knowledge
Best explanation I’ve seen on RUclips...especially if you are using pro7 like me..thanks
Hi Praise the Lord I am really thankful to you and God for helping us online learning about Black magic switcher in cameras.
This is Pastor Akashdeep Sharma from India
I need more help I want to start a online TV channel 4 hours everyday for that I am planning to use to black magic 4K and ATEM Mini with overlays logo on prerecorded Sermons, interview and more programs to share Christ. On RUclips and Facebook and latter on broadcast TV if you have made any video about this all please share the link with me it's not please help me. this is Pastor Akashdeep Sharma from India
Hello sir,
I really glad that I´ve seen your videos and I knew that God used you for His glory to work with. I thank God so much when I met you here. At our church we would like to do that but we have not so much fund for that. So we pray for that if God give us to do that as soon as possible. Thanks so much.
Last time I watched your video, I was still waiting for my Atem. Now, I got it and already streamed several events. Nice thing!
Thank you very much for your videos!
how much did you purchased it please?
He has returned
very helpful, I appreciate you taking the time to make the video :)
I could hug you! This is awesome
Best tutorial and explanation on RUclips. Really helpful video to mastering the Keying in ATEM Mini. Thank you very much!
You do an outstanding job explaining what is needed. Thank you so much.
Thx again Steven! ❤️ I‘ve learned a lot again. Greets from Germany, Philipp
The information in this video is appreciated. Thank you kindly
You just changed the game for me. Thank you !
Clear & concise. Thank you for sharing! Keep up the great work. You are a blessing!
Thank you Steven for your time and dedication! Great teaching. God bless!
Great video Stephen, always learn a lot from your content
New subscriber- thank you for being so concise and thorough when explaining! You are awesome!
Purely awesome tutorial and explanation!
Awesome content! Thank you for all that you do! Blessings!
A very clear description. Thanks.
great how to video , thank you so much
I appreciate your Video where I am trying to do
ive decided the best way to do this is to run the atem output through a computer with ProPresenter and let ProP do the streaming. Can either use the atem as a web cam or you can use atems hdmi out into computers hdmi caputure so you can still use the ISO recording on the atem’s usb c port. No keying required. With ProP at the centre of operations you got a lot more power and you dont need to deal with ATEM’s awkward clunkiness. I dont have an atem extreme yet but that is the goal. then i will use Mix Effects to use it’s super source capabilities with ease (came out long after this video was made). Im assuming pro presenter didnt have streaming at the time this video came out.
Much appreciate the effort you put in! Thanks!
Thank you for this tutorial. Very insightful!
Great video! So helpful. Thanks for putting this together!
Actually understood that that! Thank you so much 😊
Can you do a short video about overlay using Powerpoint? I know a lot of small church using PPT and can afford to switch to ProPresenter (cost and re-train staff). Thanks
Best explanation! Thanks.
Thank you so much!
Great work in your videos. You are very good.
thanks . Great video
Great video! Thanks for your hard work.
And now the ATEM Mini Pro has programmable audio delay on the mic inputs! Yey!
One snag I ran into was that I couldn't get any input from any PC into the ATEM. I had to go into a windows advanced super nitty gritty display properties menu and then change my output settings to the correct framerate etc to get the feed to show up, per a different tutorial video. Might be worth mentioning.
Very good! Thank you!
Thank you.
Super helpful, thanks!
can you add multiple mask in that video switcher?
Great thanks
Great job! thanks a lot!
My ATEM mini is not being recognized by Camtasia 2020 or OBS. the screen looks blank
The webcam and Blackmagic show up as options.
The 920E works fine, but eh aTem Mimi is blank.
I have called Blackmagic they say call OBS or Camtasia
Camera
Sony
Handycam cx455
Nikon D750.
Any suggestions?
So appreciate your videos! They are a big help for us setting up our livestreaming in church.
is it possible to this using NDI instead of HDMI port?
The Atem Mini does not support NDI, but if you take the video from the Mini in to a computer, then you can use a program like OBS to combine in NDI video.
thanks a lot
Thank's for sharing
Awesome Video✌🏽✌🏽✌🏽✌🏽🙏🏼
Thank you for this video,
I wanted to know if you can recommend a camera that works well with low lighting and also good for long distances.
Great video, I just wish I could find a ATEM Mini. It looks like there might be some online, but I just don't want to buy something and wait two months for it...
Thanks
hello sir i want to ask how to set atem mini pro and easyworship for live streaming but the live streaming only uses atem mini pro not using obs please help me sir i really need your help sir thank you sir god bless you sir
Can we see a tutorial on using the atem mini with wire cast one software
This is super helpful. Thank you! Assuming this same technique works with the Atem TV HD?
Yes, all ATEMs have pretty much the same keying capabilities. Bigger ATEM models have more keyers, but they all operate the same.
How do you connect your lyrics and video showing together on obs I thought you used different capture, so how did you mix the two together from your obs or from your ATEM mini ?????
Love your videos man! You explain everything so well! I do have a question regarding the ATEM Mini that I can’t seem to find the answer to anywhere.
If we had an ATEM Mini Prowith 2 cameras and our pc using 3 of the inputs, can I use the 4th input to daisy chain an ATEM Mini and add 4 cameras to that? The way I’m thinking....the camera selected on the secondary mini will show on the livestream when the 4th input is selected on the main mini pro. Hope you get what I’m thinking.
Yes, you could do that. It will most likely add a noticeable amount of latency on that input. In other words, from input to output of the Mini will have a certain amount of processing time, so the cameras coming from the sub-mixed Mini would be further behind in time then the cameras coming in directly.
Hello and thank for your very well explained videos. Would you happen to know if this lyric presentation will work with Proclaim?
Our church uses Proclaim since it does have the ability to set up volunteer users with ID’s, so they can log in from home to set up each service. Since most of our volunteers are young and dont drive and have to wait for parents or some adults get out work late. I dont know if Propresenter has that feature yet.
Thank in advance.
Yes, proclaim has multiple screen outputs that you can configure for lower thirds.
How does it work for animated graphics like title of message or intro logo?
Options without propresenter?
Looking for a low cost camera option for the Atem Mini Pro switcher. Do you have any suggestions? We plan to mount 3 cameras. We don’t have the budget yet to buy a camera that we can control the zoom.
Thanks for this video. Just to be clear, this is only for production at the venue. If you wanted to live stream all of this, what would you do?
That's what this is for. The presentation software can be used at the same time to display lyrics in the venue as well as generate the overlays. Take a look at the videos earlier in this series on the ATEM Mini for how to live stream from the Mini.
I get down a bit of a rabbit hole when trying to decide a computer to purchase that could do this. I'm not overly tech when it comes to the computer portion. We have the atem mini pro up and running and would like to add lyrics. What are the specs of your laptop?
Hi Steven! Great video as usual! could you please explain the advantaged of the Propresenter over a simple app like keynote or powerpoint to prepare my lower thirds and lyrics? It is not that clear to me why propresenter is better that the other options really available on practically any MAC or PC. Could you explain it a little more? Thank you
Hey Steven. Thanks for the video. Quick question for you. If we're switching between lower thirds and pulling the full projector image (eg, a video being shown to the church, or the pastor using a power point) In the event we don't want it to be in the lower thirds anymore, would we need to set up another 'output' from ProPresenter and have a switch going into the 4th plugin on the Mini? Assuming the other 3 inputs are being used for cameras?
When I do the Chroma Key, the hardware buttons do not change the cameras, it just switches lyrics between preview and live/onair.
Sir Ji this product is not avilabel above amazon inside india. can you couriered this product inside our india. what in ple
can we run with alpha key?
Yes, but that requires 2 inputs, a key and fill signal. That's called a linear key. So if you want to use 2 of your inputs on a 4 input switcher for your key, then yes you can do that.
Is it possible to have lower two third shown on multiple video with only 1 upstream key ?
Cam 1 - Video
Cam 2 - Video
Cam 3 - Video
Cam 4 - ProPresenter lower 2/3
Not sure I understand your question? You want to switch between the camera 1-3 while maintaining the lower third from ProPresenter? That's what I demonstrate in the video.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
Is it Blackmagic ATEM mini support for 4k camera...
Steven thank you for your video. I got my atem mini and a MacBook pro. What is the best way to record the video utilizing atem mini to my computer without losing resolution? I tried OBS but i lose a lot of resolution compared to when the video is recorded straight into my camera. Your video looks really nice, how did you recorded?
It's the bit rate setting. For streaming we set it between 2500 and 6000, but recording should be more like 12,000-35,000. Your camera probably records at a bit rate between 28 and 50 thousand.
Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands
can this be done in version 6?
Hi there. I’m using the software called Proclaim. How can I create a graphic with alpha channel and gray to create a linear key out of Proclaim. I’m trying to make a transparent lower third. Is it possible with my computer and software to create a linear key using atem extreme?
Hi Stephen, I have a camera connected with an hdmi cable that works only on input 1. But i need it on input 3. the same set up doesn't work on input 2 or 3. 4 is already designated for L3's. The cable length if 40 ft. Thanks
Hello sir, do you think it would be possible for me to stream a simple audio visualizer instead of lyrics using the luma keying option?
Can i use this to our system to broadcast on cable system of ys
Woww..sir Im looking to buy atem mini pro for live streaming some record programs..it's enough for purposes? And can you please suggest good laptop or laptop spec for connect with atem mini pro
Very informative video. We used our for the first time Sunday. We had issues. Has the audio sync video come out yet?? I noticed Sunday that our video and audio did not line up well at all. We tried syphoning our lyrics from Pro 7. The syphon and audio lined up perfectly, but the video lagged behind. I am not sure how to fix this really. I plan to try NDI tomorrow. If that doesn't work, I will go will the settings mentioned in this video. I also found a few features that could help lessen the workload on our iMac to hopefully help the lag. With that said, our youth ministry uses OBS Streamlabs and the ATEM, and it is synced up well. They do not send lyrics though. Any ideas on what the issue might be? Do you think we overloaded the cpu running pro 7 and obs causing the video to lag? Do you recommend NDI? We have the ATEM mini pro
Any number of things in the chain can cause an audio/video sync issue. You can try and just do a time alignment - there is actually a delay in the ATEM now so you can delay the audio by frames. but I show you how to measure the alignment in this video, but don't make the change in OBS, make the change in the ATEM: ruclips.net/video/UCmr0KwbXxA/видео.html
thanks for this video, which is helpful for the initial selection and set up for the options (luma, chroma and mask). But, during a service, how do you set up for the numerous “slides” for the lyrics? For example, for the opening/welcoming song, there could be a refrain plus three verses. So how to switch from verse 1 to refrain, verse 2 then back to to refrain, etc., while possibly switching camera angles as well? Thanks in advance!
The computer with the worship software is usually run by a different person then the person running video.
Thank you for all of your informative videos! What would you recommend to do this with Pro6?
I don't believe there is a way anymore unless you already have the module. And purchasing the module you need would cost more then upgrading. So, upgrade to 7.
Ballast Media thank you! We ended up just using an upstream Luma flying key to display the same image from the house. Not what we want overall, but achieves the feel until we upgrade. Thank you for your videos and for your response! Blessings!
My pro presenter doesn’t recognize my ATEM mini any ideas?
Any help... We have Atem television studio (not the HD) and Pro Presenteter 6 and doesn't work for us, are we doing something wrong? Thank you
How are you sending your lyrics to the Atem? PP6 doesn't do multiple formatted outputs without a purchased add-on, so you'd have to use something like the stage display to send a black-background with your lyrics to the Atem. (They don't sell the add-on anymore because it cost more then upgrading to PP7)
Hello, is this tutorial valid also for propresnter V6? Tahnks!
You can only do multiple outputs with PP6 if you have the multiple output module. If you don't already have that module, you can no longer add it (it cost more then upgrading anyways).
We are using the Chroma Key option, but in Pro Presenter, when you click the clear slide button, the screen will go completely black. You will only see the video underlying, if you have text on your slide. In between songs, the tech clears the slide lyrics, and then all we get is a black video on the feed. Do I need to have the Video Input option turned on, in the Looks panel? I only have the slide option selected.
No, don't use video in the look. It doesn't seem like your chroma settings are correct on the ATEM. Black should be transparent, so if you have no words displayed, it should show everything from your camera, overlaying nothing.
These videos have been so helpful in upgrading our video content on a budget. Thanks for that!
Our soundboard, cameras, and media computer are all in the sanctuary, but currently our recording and live stream PCs are in another building. My thought was to get the Atem Mini Pro set up in the sanctuary and have our producer just control the Atem from the other buildign using the software. But as I've found out, the issue here is that the producer doesn't have access to the multiview monitor (since I can't send the HDMI out signal that far).
Do you know of any solutions aside from something like a HDMI to fiber converter to send the HDMI out signal a fair distance? Am I just missing something easy within the Atem Mini Pro?
How far is the distance from where the ATEM Mini Pro will be and where the operator will be? If you convert the HDMI out to SDI you can run that up to 300+ feet. Then just convert back to HDMI and connect to a TV.
@@BallastMedia I'll have to measure that out, but if I had to guess, it'd be closer to a couple hundred yards.
Can you use the upstream and down stream simultaneously for a logo and lower third?
Yes!!
Not tying to overlay lyrics, I just want to screen mirror. We have a Mac connected to a 2 way splitter. One side to a projector, the other side to a stage monitor. That all works fine. The stage monitor is no longer needed I unplugged the HDMI cable from it and plugged it into Cam 4 slot on the mini pro. This however did not work, any idea why not?
Try it in CAM1 input. Sometimes the Atem Mini does a better job of adjusting to a computer input on input 1. But, that being said, also what resolution and frame rate is your computer output set to?
So I know this may be a dumb question. So we have an atem studio 4k. We run four cameras via sdi in and then run a dedicated out on our mac studio to it as well. I get how to do the lower thirds for lyrics but what about after the worship through music and the pastor has a powerpoint that has been imported into pro presenter how would that get handled.
Usually I run both the "lower third" output from the computer, and the main screen output to the switcher. So, during sermon when they use full screen slides, you can switch to that in your video as well. That is usually the simplest solution short of generating two sets of content.
Thanks for sharing Brother Steven. What are your thoughts on the Yolo box vs the Atem Mini? Are there advantages with one over the other?
So far I'd say go with the Atem Mini, cost/performance is better with the Mini Pro.
@@BallastMedia thank you
Hi. I have a question, I’m using chroma key my source is hdmi 4 (PC), hdmi 1,2,3 are cameras, when I turn on Key on the switcher I saw the lyrics but when switch to another camera the Key turn off. Can you help me to identify the problem. Thanks.
In the Atem Setup program there is a setting that will change this behavior so it will stay on.
Fantastic video: I currently connect my laptop (ProPresenter) to a 3 way HDMI splitter to connect my laptop to the 3 TVs in the church. I will like to replace the 3 way HDMI splitter with a 4 way HDMI splitter so that I can connect the 4th HDMI output in the HDMI splitter to one of HDMI in in the ATEM MINI PRO ISO (installing a multi camera set-up at church for the first time) and want to maintain my current laptop to connect to the ATEM MINI PRO ISO, problem is it only has one HDMI slot. Will this work?
anyone please comment!
If this set-up doesn’t t work then can someone tell me how to make this work since My problem is I only have one HDMI output on my laptop. So how can I get two HDMI outputs from my laptop to the HDMI splitter as well as the ATEM MINI PRO ISO?
Are you wanting the same signal from the laptop sent to all these destinations? or are you trying to get 2 different display (content) outputs from the laptop?
@@BallastMedia 2 different displays. one display for the 3 TVs in the church and a second display (lower thirds) to ATEM MINI PRO ISO
I am also interested in trying this set-up: I will buy a dongle that has an additional hdmi port, so I will end up with two hdmi output ports. The one that comes built in with the computer and the one that comes with the dongle. I will use one for the 3 TVs (3 hdmi splitter) and one for the ATEM MINI PRO ISO (Lower thirds from ProPresenter 7). This should work right?
When running lyrics from pro presenter and switching between cameras, the lyrics disappear as soon as I switch, how can I fix that?
In the Atem Setup program there is an option to change that functionality. Not sure why it defaults now to turn off with transitions, but you can change it.
When I'm putting the lyrics in an overlay using either luma or chroma key the lyrics go away every time I switch the cameras. if I hit that camera button again they come back, but this leaves a flash at best. This is annoying because I don't want to be stuck to one camera shot during praise time. Is there a way to get it to leave the lyric overlay up, regardless of what I do with the main cameras until I turn it off? I'm using an ATEM mini Extreme.
If you are using the upstream key, put the second upstream keyer on the preview bus (with the same key source) now when you switch you'll be switching back and forth between the keys, but to the viewer it just looks like the key is staying on.