What video topics would you like to see me cover next?? __ *TIMESTAMPS* 0:00 - Copy and Paste Sketches, Bodies, or Components in Fusion 360 0:43 - Copying a sketch within a sketch 3:30 - Selecting sketch geometry tips 4:43 - Copying one sketch to another sketch 7:50 - Copying a sketch to another design file 10:21 - Copying a body in the same file 11:00 - Copying a component - "Paste" option 12:14 - Copying a component - "Paste New" option 13:00 - Copying a body to another design file 14:27 - Copying a component to another design file 15:00 - Linking components between design files 16:00 - Summary of copying sketches, bodies, components
Next topic: How to deal with F360 file management. It is completely foreign to normal file processing on any kind of computer. I'm a home user and need to figure out how to deal with the new restrictions coming in October. I'd really like for F360 to give me a way to manage workspaces, delete the ones I don't like, rename and move around in folders I create after the file(s) is/are created. F360 doesn't give me good options there.
I am confused by one feature. When I create a body and move it, my sketch no longer matches where the body is located. Is there an easy way to make sure the sketch follows the new body position?
1:40 Right click and select Copy - No, dammit, you can't because that option is not there. "Notice how when you paste it opens the Move/Copy dialog" - No, it doesn't. That would just be too easy. EDIT: You neglected to mention that you are in Edit mode -- note the green check in the top right corner. If this check is not present, you can't copy and paste. For us beginners, it's really important that you tell ALL the steps.
He literally explained that several times. He said you needed to be in the sketch plane (meaning the edit mode) because he said it doesn’t allow you to paste it into floating space, he said you had to be on a sketch plane
I just want to say thank you so much. The copy and past of this program has been so frustrating for me for years. You have the best explanation ever. Thank you thank you thank you.
It is so very helpful to have you calling out the key strokes as you go along! I have so much to learn and you pack it in there perfectly. Every 3 minutes a list of knowledge widgets. THANIKS!
Kevin I did not realize how important it was to understand the nature of sketches and it’s relationship to how it reacts like a word document . That was very helpful . Not sure I remember you explain it in any of the beginners videos ,but seems to be a key point newbies need to understand . I am a little reluctant to give advice as I never want you to think all the other training videos were not appreciated . I know these video take a lot of work and it is very difficult to teach something with so many interdependent concepts plus you may have covered it and I was not focused .
You're exactly right, Dave! It's hard to explain some concepts without telling the student to go learn 5 others first...and then they forget what they were trying to learn :)
Great tutorial. As a newbie in this modeling space, the vagaries of how to do things which are simple in other software (eg copy and paste) can be very frustrating. I appreciate the clear explanations of WHY and how to proceed. Thank you for the content!
Thank you. This video finally allowed me to copy sketches! Here in mid-2022, I think Fusion 360 could've been smarter about it though. As in when pasting without an active layer, it should be smart enough to bring up a dialog informing the user as such. Then provide option to automatically create a new sketch. Example: If user uses CTRL+V without an active sketch, then Fusion 360 brings up a dialog with message "An active sketch is required to paste a sketch. Create a new sketch?" The user then should have the options of OK or CANCEL. Would save sooo much confusion around the world!
I've come to the conclusion that copy/paste doesn't exist in Fusion 360. I have watched every tutorial, I have followed them to the letter. I have still never been able to copy and paste anything, in Fusion.
Thanks for making this excellent video! You have the knack of being able to accurately match what you are saying and doing, in real time, without skipping or missing critical steps. I just now realized how many of your videos I've watched and been able to make real progress in my F360 learning. Subscribed!
Great vid pointing out a difference between components and bodies I don't normally think about - component is the whole package, body is just a body...
the "copy" selection is apparently no longer in the updated version of fusion 360? i've tried looking at evey area in this video, the option isn't there. control c or v does nothing
This is really helpful for newbies I'm sure, and though I've used Fusion a lot I was definitely surprised to see what you can do with pasting sketches after turning off design history. I almost never work with design history off. One of my biggest complaints about Fusion is the inability to link mirrors like you can with component instances/copies. Solidworks allows you to create an "off-hand" mirror which is linked to the original component and updates with any changes to the original. Really wish you could do that with Fusion instead of needing to roll back in time to before you mirrored the part to make changes that update the mirrored version. Copying sketches seems to universally have the same issue.
Hi, Seth IPG. As former SolidWorks user myself, I feel your frustration. There are lots of quirks that Fusion 360 has that will hopefully have new solutions in future updates. I also rarely work with design history off, because it's so critical to be able to go back and edit things. Have a happy holidays and a happy new year! Cheers, Kevin :)
Another great video Kevin. Your videos have actually made me want to use Fusion 360, not dread it! While I am still very much a beginner, at least I understand what I am doing now. One video I would love to see is your version of an explanation of G0, G1 and G2 surface continuity. I spent hours trying to figure out why I kept getting G1 errors when using the loft command before ultimately figuring out that it was actually my mutli-line, not a spline that was the issue.
Hi, Barry. Glad to hear you're enjoying the tutorials. Definitely keep at it... it can be frustrating at times, but I'm always happy to help if you run into roadblocks. Thanks for the video suggestion! I've added that to my video topics list. Surface continuity is definitely something I need to cover more in-depth. If not full on video, at least a portion of a video. Cheers, Kevin :)
I'm finding your videos very helpful! I'm new to Fusion 360 and really learning a lot from this channel. Thank you! Looking forward to more. Subscribed.
I came here to find out why I couldn't copy a sketch (and now I can) and then I also learned a ton more. I could have done without the non-parametric workarounds (who does that anyway?) - but with multiple rewinds I was able to grasp it all. Thanks
Thanks, that saved a lot of time. I'm just learning Fusion during the weekends and it seems my brain has a slow leak so, I have to redo some things I know I have already done. I thought I needed a practical project to help focus, , 'motorise the blinds', just a wheel on a stepper motor to drive a bead chain right? A sale came up, bought a cheap 3D printer, did a quick sketch on a bit of paper, converted to Fusion, two weekends later I found out the sample filament they give you is not enough to complete the job. BUT, it took me almost 3 hours to figure out how to do the 'D' shape hole for the shaft as a push fit and two test prints to get it right. This clip means two things. One I can copy parts from project to project saving time. Two I will be back here to remind me how. Make that three, my wife's reaction to when I install the project.
Awesome video super well done thank you :). Just wanted to convey something I came to youtube to get an answer for. maybe someone else can benefit as well. all the sketches you copy pasted here where not fully defined and therefore the pasted geometry was not also. My issue is fully redefining the sketch once its been moved. maybe and additional idea for a future video! Cheers thanks again!
Newbie here. Just a few simple projects under my belt. How do you start with a component? When I start designing in F360, my sketch opens in its own sketches folder, not nested under a component. Also, when I copy and move my sketch, the copied sketch doesn't have it's own sketch file under a folder, it stays associated with the original.
how to bind a sketch to a body you are working with. I understand how to get the sketch to be defined on the face of the body plane, but not lock the sketch to the plane that is actively being sketched on. not sure if that makes sense. Thanks for you vids! i have learned a lot.
I think your vids are very intuitive to your audience and i for one appreciate what you're doing...i had a question though what's the difference between using copy and paste and mirror and which one would you recommend?
Great question! it really depends on the use case. Mirror will literally make things opposite...so if you have threads or certain types of parts that can't truly be mirrored then you'll want to copy and paste
Kevin, your videos have been a GREAT help in learning Fusion 360. I find them useful in making real objects. I am still very much a beginner, but I am using my beginner knowledge, and your RUclips video's to help the students at my school use Fusion 360. I have one question. I find that using the Create Sketch feature you use at 6:35 does not work for me. I follow you exact steps, but I do not see the planes between the axis displayed so I can click on them. Any idea where I went astray? Thanks
Thanks for the tutorials. When I paste New component, the Sketch is still tired with the original. When I try to edit sketch of the new paste component It send me back to the sketch of the original component. What I want to do is position the new paste component with sketch Dimension. Any advice? Thank you.
It seems like when I paste new a component, and move it to the side so it is no longer "on top" of the original -- and then try and MOVE an element in the underlying sketch geometry of either component, the new component body SHIFTS BACK to its original position in the same spot as the copied one. This doesn't happen when I change the size of the sketch geometry, just when I try to move elements. So it still seems like its kind of tied. I saw something online about disabling "capture position" but it looked to be an old version of F360 and I cannot find that same option on the most current version. Any thoughts?
OK, so my brain hurts - but not quite es much as it did! Certainly cleared up some of my confusion even though I try to use project rather than copy/paste. I think once I've watched this a couple more times I should have this more or less nailed (fingers crossed!).
Hi, Andy. I definitely recommend using Project and Intersect when possible over copying sketches. Generally those are much easier to manage and to help keep models predictable. Cheers, Kevin :)
Hi. In the section 'Copying one sketch to another sketch' there's a much simpler way to COPY/PASTE the sketch by selecting the sketch (CTRL+C) followed by a CLICK in an EMPTY SPACE then paste (CTRL+V)
hey... nice video, pretty straight forward... still can't do it. For some reason I don't get the paste option while i'm editting the sketch i'm trying to paste to... weird. I can copy the sketch features in the same sketch environment, but can't do it in a different file. Is it a settings thing??
I have image of my heat block is there a way of getting the heat block into fusion 360? I need to make a mold for a silicone soak can you help me please please 🙏
Hi, nice video! How I can paste a lot of the same sketch form? I need to paste the same circle in a lot of positions in the same sketch and it's not placed in rectangle or circle pattern. Thx!
I would suggest using either equal constraints or symmetry constraints based on the location spacing. It's hard to say exactly without know what you're sketching...but definitely try to use constraints.
Thanks for the tutorials. I have a question about copying a fully defined sketch (ie. constrained and with projections) from one design file to an other. Once you try to introduce the sketch to the second design file sketch, obviously the dimensions are still there but all blue, unconstrained. Now, I thought that logically the sketch was copied all tied together and it was only a matter to link the copied sketch to a known (common) geometry, giving this way an "anchor point" for the copied sketch. But sadly even using the move "point to point" in a fully defined point on the new sketch doesn't anchor the copied sketch and it remains blue... I was doing this to save some time and using the same sketch between different project files. But doesn't seems to work, any suggestion. Thanks
@@ProductDesignOnline I had no clue as I'm rather new to Fusion 360, but I did manage to succeed by copying and pasting the lines of the sketch. Thanks anyway!
The fact that Fusion 360 has been around this long and still can't get a simple, intuitive method of copy and pasting things is pretty sad. Autodesk used to make good products.
does this still work? im in sketch mode and cannot get anything to copy. the only option i get is move/copy, with no notion of the word "copy" anywhere else.
Great Video. I have a question, please help. I've finally been able to copy components from one design to another, but I need the sketches to follow as well so that the copied component can be editable. How do I do that?
Instead of copying, go to the Data Panel and right-click on a design and select "Insert into Current Design". This will place it in the open/active file. You can break the link if desired, but the entire file/component, including the sketch will be placed there.
When I create a sketch, I can get multiple instances of a structure, but then if I try to copy the copy, move/copy only gives me the "move" option. The "Create copy" is grayed out. I have to do the same thing again multiple times. Surely there's a way to make copies of a copy?
Hey Kevin, I'm commenting because I've got a pretty urgent question about 3D printing. If I needed to print three of the same box but as individual parts, would I have to print the design of the box three times; is there a way to put three boxes on one design and hit print just once? Sorry if it's a dumb question haha
Hi, TheGoldenLlama. You can copy your components or bodies in Fusion 360, to make 3 of the same box. Then, when you have the "Export as STL" dialog open you can select the bodies/components, making sure all 3 are selected. The second option would be to copy and paste in your 3D printers slicing software. I use Cura, which is pretty simple. You can simply use the standard CTRL/CMD + C and CTRL/CMD + P to copy and paste the box until you have 3. Cheers, Kevin :)
Hi c P. Those types of textures, which I would consider "Complex Patterns," would have to be done in another piece of software and brought into Fusion 360. Fusion 360's parametric nature doesn't do well with things like that because it would have to re-process the pattern any time you make a change that affects it. Autodesk Mudbox can be used in conjunction with F360 - www.autodesk.com/products/mudbox/overview
@@ProductDesignOnline Thanks. Will check it out. I am creating solid shapes in Fusion for making a pourable mold. I have seen where Fusion Cam capabilities has some applicability but seems very limited.
IF I try to use the copy/ paste new for a component into a new design, an error pops up for a brief moment then a copy/move block comes up and asks me to chose what I want copied, basically it fails.
Kevin, Thanks for an awesome Fusion 360 Series that makes learning easy. I would like to see information on making a SVG File like you inserted in your Absolute Beginner Video where you made the 3D stamp with handle. I tried to edit your downloaded SVG file to change the text to fit my use and could not get it to work. Thanks again Kevin
Hi, Gary. Glad to hear you're enjoying my tutorials. I wasn't planning on doing a video on creating an SVG, since that cannot be done within Fusion 360. Scalable Vector Graphics (SVG) can be made in several graphics programs. I use Adobe Illustrator, but a free alternative would be Inkscape. There are many tutorials out there for Inkscape. There are also several SVG creation web apps (some free) if you do a Google search. Cheers, Kevin :)
Okay, thanks for your reply Kevin. I will search for other RUclips Videos on SVG File creation. I use Corel Draw and don't have an issue with creating the graphics portion to the same size as the stamp plate(in Corel Draw), my problem is that when I insert my SVG File into Fusion 360, the scaling is off and my graphic is offset too far and too large to fit the stamp plate. I have looked for scaling controls but haven't found anything that helps yet. Anyway, I am sure that will be covered in the SVG File creation videos. Thanks again Kevin, I am a fan and intend to support and follow you while I improve
@@scabahorn Hi, Gary. Yep, I would recommend that you create the SVG at the size before inserting it into Fusion 360. Since Fusion 360 has limited capabilities with SVGs it will help avoid and errors with trying to scale it. You can, however, click and drag on the corner manipulator icon that is next to your SVG design (While using the Insert SVG feature). That will let you scale the SVG file right in Fusion 360. Cheers, Kevin :)
Hi, Hershal. There's a lot of information to digest... I'm going to add the timestamps (very soon) to make it easier to watch specific parts. Cheers, Kevin :)
Kevin to create a 1 x12 x 1/8" interconnecting steel bar to hold slide rails in place using a series of duplicate top and bottom extruded flanges; should I use the bar as the base and copy and paste in modules of the flanges - or is there a better way ? Thanks Richard Cherry
Hi Richard. When possible, always copy/paste or pattern solid bodies instead of sketches. A good way to think of it... -Copy/Paste or Pattern Bodies = when each object is technically its own individual part -Copy/Paste or Pattern Sketches = when all the sketches make up one single part
@@ProductDesignOnline Kevin - Thank You. You just saved me from going down the wrong path and hours of wasted time. As you indicated, I will create a series of separate Components with Bodies, duplicate some, and assemble them into the finished part. I Love THE DETAIL In Your Videos. I Use The Transcripts Extensively. Very Much Thanks Richard
Thanks a lot! Again another great video! One thing: I noticed that I can copy bodies from one component to another in the same design file. Is there any “danger” in doing so? (Like unwanted dependencies or so)
Hi, Max. Yep, you're correct - the main issue with that is that you'll have a broken timeline if you delete the original sketch or assets (planes, sketches, etc) that contains any relationships to that body.
Product Design Online thanks für the response! So I have been lucky until now! Will avoid it in the future! Again thanks for the great work you’re doing here!
Dummy question Kevin, if you allow me... I want to duplicate a part I designed on Fusion 360 and copy it to a new file and modify the sketches to make some variation based on the original design. Is it something doable ? Or did I miss something on your video ? Thank you for your future reply.
The easiest way is to open the file, then do a "save as" with a new file name. Then you can edit away as you like with no links to the previous file retained.
Hey Kevin. So I have a design which ultimately looks like a bath shape. In sketch mode I can create the rectangle fine. Then after extruding it next step I shell it. Now I have a rectangular bath. Only I want the underside to be curved. Copying that if a bath. How do I go about doing that? Cheers.
Hi, James. There are many routes to make the bottom curved. The simplest would be to apply fillets to the bottom half before you shell it. If you want a more advanced (defined) curve then I would recommend setting up side profiles, resulting in geometry that can be used with the Loft command (instead of Extrude). Cheers, Kevin :)
Thanks for the reply and wish you Merry Xmas Kevin. Ok so I did it. Slightly rudimentary maybe but still. I went about it a different way the next day. What I did was to sketch it out and then do the curve underside first. Then to shell it and not the other way around. Then unside the bath shape I used the press and pull function till I had the floor of it flat. Once achieved I began creating the circles and wxtruding them for my rotary drive unit im copying which is on the table in front of me. Big question. How do I stop fusion flipping my on screen design which happens regularly. Turns it 180 degrees so I have to then readjust it. Very annoying.
@@jamesbarratt593 Hi James. Unfortunately, there is not currently a setting or way to have that flipping issue turned off without turning off the entire "Auto look at sketch" feature. However, if you turn that off entirely then you will have to look at the sketch manually (with the viewcube or display settings) each time. A feature to do so was requested on the idea station a couple of years ago. I remember as this sometimes annoys me as well...but they obviously haven't implemented a solution yet. Wishing you a Merry Xmas and a happy new year! Cheers, Kevin :)
Dude that is a game changer. If I have to endure that repeatedly I am sure it will annoy me so much that I wont want to use it so much. How stupid that it does it. Anyway we shall see. Then say that you have a face you want to press pull to close an edge and you just cant get to it for the sides of a box in your way, is there a solution. Can you click on a side of a box and temporarily hide it like in system analysis so you can fix the place you want to fix?
@@jamesbarratt593 You would want to use the "Section Analysis" from the "Inspect" dropdown menu to essentially temporarily cut away the parts of your model that are in the way. The nice thing about section analysis is you can hide/show it in the Browser, so you can turn that on and off as needed.
Hi Richard. Are you referring to when using the copy function of "Move/Copy" command? If so, here's the reason - knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Create-copy-command-missing-from-the-Move-dialog-within-Fusion-360.html
Any tips to paste constrained sketches so the new pasted version is still constrained? Seems every time I paste a sketch, the lines turn blue. Everything looks the same but if I try to move the sketch around using constraints, everything goes bonkers...
I would suggest copy/paste a component with the desired sketch (if possible). Constraints should copy with, but it's hard to say without seeing it. You will have to constrain the new copy/pasted sketch to the origin point of the new sketch.
@@ProductDesignOnline seriously, there are many people on RUclips with fusion videos and many are good, but yours are so clear, to the point, and you still manage to explain the details. Superb
Great video! One thing I've noticed when I copy items is that the number of items selected increases as you copy/paste. See 6:48 mark. You have a square and three circles, but it has copied 62 items. Why does it do that?
Great question, Ted. I should've talked about that more in the video...but that is because you're not just selecting and copying the square and circles, but ALL of the sketch constraints and sketch entities as well. That means any sketch point, constraint, or anything else selected will be copy and pasted. By the way, thanks again for the coffee :) Cheers, Kevin
I want to be able to duplicate a component and then be able to modify the underlying sketch without affecting previous components that also used that sketch.. how do I do that? ie. tell the new component to make a copy of the sketch that I can edit. When I created a new "paste new" component, there is no history or any sketch associated with it. Seems to just be "base feature"
There should be a sketch as long as the Sketch is nested underneath that component before you copy it. Can you double-check that the sketch is in the correct place?
@@ProductDesignOnline no... no sketch "underneath" - if you mean below or inside it in tree - i have main tree base then separate branches for Sketches, Bodies - I'm not sure if this is correct or not, but that's where F360 seems to put things by default. The component I am trying to copy is an extruded sketch, which then gets further shaped by another extruded body from another sketch (using Cut method). I then I think used "make component from body" on finished piece to separate it out on tree and make it possible to save as STL separately. The entire history of making it is basically throughout the Timeline history. Anyway I gave up trying to copy/modify it - just ended up having to rebuild the new version of component by starting from beginning again.... copied the two underlying sketches and modified to new shapes, then extruded and cut them again. Very slow having to do all again, just to make slight modification to shape of original component 😞
I select a body, hit 'M'; I'm offered a move/copy box. Sometimes the 'create copy' box is available to check, sometimes it's greyed out. Why? Other functions seem to appear/perform randomly!?!
I understand that it can feel random, but there is a method to the madness... There are just a lot of variables at play. Most importantly is whether or not your component is active and whether or not the bodies are grouped underneath the components. Second, the timeline marker needs to be all the way at the end of the timeline because of parametric modeling.
@@ProductDesignOnline But I hit 'M' once, & the box is grey, I hit it again, (or for the umpteenth time!) & it's available - or not! I cannot see what I'm doing differently. Other things seem similarly random, & for no apparent reason, (e.g. rotate; + or - angle?)
I dont understand why they don't implement "paste as new sketch" = just copy with no relation to previsou. same as I can do it manualy by creating new sketch and copy everything inside of previous.
Hi, Paul. Thanks for the suggestion. I do have it on my video topics list to cover the best ways to Move/re-orient bodies/components...so I will definitely try to do that at some point! Cheers, Kevin :)
How do you copy a body and keep all its history. So for example I can change an extrude I made on the original body but on the new one not the original.
@@ProductDesignOnline so if I create a component from body then copy the component and paste new it will retain all parametric timelines that apply to it and copy that timeline over as well so I can individually change the history only affecting that part?
Hi Mike. You can project a Sphere to a sketch if you switch the Project command to "bodies." In the project dialog, you will need to select "bodies" for the "Selection Filter". It defaults to the "specified entities" option. Cheers, Kevin :)
What video topics would you like to see me cover next??
__
*TIMESTAMPS*
0:00 - Copy and Paste Sketches, Bodies, or Components in Fusion 360
0:43 - Copying a sketch within a sketch
3:30 - Selecting sketch geometry tips
4:43 - Copying one sketch to another sketch
7:50 - Copying a sketch to another design file
10:21 - Copying a body in the same file
11:00 - Copying a component - "Paste" option
12:14 - Copying a component - "Paste New" option
13:00 - Copying a body to another design file
14:27 - Copying a component to another design file
15:00 - Linking components between design files
16:00 - Summary of copying sketches, bodies, components
Hi Kevin, thanks for the great tutorials! just wanting to know is there a way to copy a form then scultpt edit the copied form? (T-Spline), thanks
Next topic: How to deal with F360 file management. It is completely foreign to normal file processing on any kind of computer. I'm a home user and need to figure out how to deal with the new restrictions coming in October.
I'd really like for F360 to give me a way to manage workspaces, delete the ones I don't like, rename and move around in folders I create after the file(s) is/are created. F360 doesn't give me good options there.
I am confused by one feature. When I create a body and move it, my sketch no longer matches where the body is located. Is there an easy way to make sure the sketch follows the new body position?
1:40 Right click and select Copy - No, dammit, you can't because that option is not there. "Notice how when you paste it opens the Move/Copy dialog" - No, it doesn't. That would just be too easy.
EDIT: You neglected to mention that you are in Edit mode -- note the green check in the top right corner. If this check is not present, you can't copy and paste. For us beginners, it's really important that you tell ALL the steps.
damn tom, lol.
Yes, this took me about 20 minutes to figure this out. Thank you Tom, no thanks to the guy who made this video... Please explain ALL the steps, GEEZ
He literally explained that several times. He said you needed to be in the sketch plane (meaning the edit mode) because he said it doesn’t allow you to paste it into floating space, he said you had to be on a sketch plane
I just want to say thank you so much. The copy and past of this program has been so frustrating for me for years. You have the best explanation ever. Thank you thank you thank you.
Glad to hear that, Timothy! Cheers :)
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
dang dude, slow speaking, clear and concise explanation, time stamps in the description? This is amazing
If only all RUclips tutorials were like this ;) lol
finally!!! a video explanation that actually works!
Can't believe they made Copy-Paste option so obscure and difficult.
Yea... this is one of the few videos I was hoping would be 'dated' quickly... by them making the process better :D
Man, you and lars are my go-to for clearing up any confusion I have in this goddamn program. Clear and accurate, unlike the autodesk forums...
I won't comment on the Autodesk forums ;) Glad to hear that though!
It is so very helpful to have you calling out the key strokes as you go along! I have so much to learn and you pack it in there perfectly. Every 3 minutes a list of knowledge widgets.
THANIKS!
This series is a gold mine to me, no matter how many times I watched.
Thanks, Sun Peter! Glad to see you're still learning with them :)
Finally found the info I needed around the 10:00 mark. I was copying a sketch and was unable to edit it. Thank you!
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
2021 - This content is still amazing and valuable, especially to complete beginners like me.
Kevin
I did not realize how important it was to understand the nature of sketches and it’s relationship to how it reacts like a word document . That was very helpful . Not sure I remember you explain it in any of the beginners videos ,but seems to be a key point newbies need to understand . I am a little reluctant to give advice as I never want you to think all the other training videos were not appreciated . I know these video take a lot of work and it is very difficult to teach something with so many interdependent concepts plus you may have covered it and I was not focused .
You're exactly right, Dave! It's hard to explain some concepts without telling the student to go learn 5 others first...and then they forget what they were trying to learn :)
Great tutorial. As a newbie in this modeling space, the vagaries of how to do things which are simple in other software (eg copy and paste) can be very frustrating. I appreciate the clear explanations of WHY and how to proceed. Thank you for the content!
Thank you. This video finally allowed me to copy sketches! Here in mid-2022, I think Fusion 360 could've been smarter about it though.
As in when pasting without an active layer, it should be smart enough to bring up a dialog informing the user as such. Then provide option to automatically create a new sketch.
Example: If user uses CTRL+V without an active sketch, then Fusion 360 brings up a dialog with message "An active sketch is required to paste a sketch. Create a new sketch?" The user then should have the options of OK or CANCEL. Would save sooo much confusion around the world!
I've come to the conclusion that copy/paste doesn't exist in Fusion 360. I have watched every tutorial, I have followed them to the letter. I have still never been able to copy and paste anything, in Fusion.
Thanks for making this excellent video! You have the knack of being able to accurately match what you are saying and doing, in real time, without skipping or missing critical steps. I just now realized how many of your videos I've watched and been able to make real progress in my F360 learning. Subscribed!
Thanks, Greg! Glad to hear you're learning a lot :)
Great vid pointing out a difference between components and bodies I don't normally think about - component is the whole package, body is just a body...
the "copy" selection is apparently no longer in the updated version of fusion 360? i've tried looking at evey area in this video, the option isn't there. control c or v does nothing
THANK YOU!!!!! the trying to paste into space without selecting a plane was killing me for 40 min.
gee I am glad I watched this, Saved me a bit of head scratching
...you have a gift... The gift of teaching :-)
thanks for the kind words, Andrea! :)
thanks . that exactly what i was searching for . i wish u the best m8
Thanks, Habeeb! Glad that you'll make great use of this. Cheers, Kevin :)
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
Well explained. Thank you for sharing!
Another great tutorial! You are a great teacher! Too bad I cannot hit the Like button multiple times!
Thanks, Sun Peter! Glad to hear you're still learning lots! As always, I appreciate you watching my videos. Cheers, Kevin :)
This is really helpful for newbies I'm sure, and though I've used Fusion a lot I was definitely surprised to see what you can do with pasting sketches after turning off design history. I almost never work with design history off. One of my biggest complaints about Fusion is the inability to link mirrors like you can with component instances/copies. Solidworks allows you to create an "off-hand" mirror which is linked to the original component and updates with any changes to the original. Really wish you could do that with Fusion instead of needing to roll back in time to before you mirrored the part to make changes that update the mirrored version. Copying sketches seems to universally have the same issue.
Hi, Seth IPG. As former SolidWorks user myself, I feel your frustration. There are lots of quirks that Fusion 360 has that will hopefully have new solutions in future updates. I also rarely work with design history off, because it's so critical to be able to go back and edit things.
Have a happy holidays and a happy new year! Cheers, Kevin :)
Another great video Kevin. Your videos have actually made me want to use Fusion 360, not dread it! While I am still very much a beginner, at least I understand what I am doing now. One video I would love to see is your version of an explanation of G0, G1 and G2 surface continuity. I spent hours trying to figure out why I kept getting G1 errors when using the loft command before ultimately figuring out that it was actually my mutli-line, not a spline that was the issue.
Hi, Barry. Glad to hear you're enjoying the tutorials. Definitely keep at it... it can be frustrating at times, but I'm always happy to help if you run into roadblocks.
Thanks for the video suggestion! I've added that to my video topics list. Surface continuity is definitely something I need to cover more in-depth. If not full on video, at least a portion of a video. Cheers, Kevin :)
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
Love your style of teaching. Thank you so much.
Thanks, Kevin! :)
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
thank you for your videos they help tremendously
Ok none of that helped for me, I still can't copy and paste the sketch I want from one file to another :(
Old post but you can use the 'insert derive' and pick off any of the sketches you need from other models into another model.
Must have skipped a step. Everything needs to be in sketch mode.
I'm finding your videos very helpful! I'm new to Fusion 360 and really learning a lot from this channel. Thank you! Looking forward to more. Subscribed.
Thanks, JMoto84! I appreciate you and glad to hear you're learning a lot :)
I came here to find out why I couldn't copy a sketch (and now I can) and then I also learned a ton more. I could have done without the non-parametric workarounds (who does that anyway?) - but with multiple rewinds I was able to grasp it all. Thanks
Glad it was helpful!
A fair amount of folks work in Direct Modeling mode (particularly those who plan to export to other programs for Games, etc).
Thanks, that saved a lot of time.
I'm just learning Fusion during the weekends and it seems my brain has a slow leak so, I have to redo some things I know I have already done.
I thought I needed a practical project to help focus, , 'motorise the blinds', just a wheel on a stepper motor to drive a bead chain right?
A sale came up, bought a cheap 3D printer, did a quick sketch on a bit of paper, converted to Fusion, two weekends later I found out the sample filament they give you is not enough to complete the job.
BUT, it took me almost 3 hours to figure out how to do the 'D' shape hole for the shaft as a push fit and two test prints to get it right.
This clip means two things.
One I can copy parts from project to project saving time.
Two I will be back here to remind me how.
Make that three, my wife's reaction to when I install the project.
Glad to hear that, Kevin! Best of luck with your projects :)
Fantastic tutorial! Thank you
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
very very helpful. Thanks for the info
another great video, you definitely hit a few points that frustrated me greatly!
Hi, Adam. I feel ya... there are a lot of quirks and different workflows to keep track of.
Thanks for watching! Cheers, Kevin :)
Thanks for the tutorial , It is great.
excelent video, clear, precise, and to the point.
Thanks a lot
Awesome video super well done thank you :). Just wanted to convey something I came to youtube to get an answer for. maybe someone else can benefit as well. all the sketches you copy pasted here where not fully defined and therefore the pasted geometry was not also. My issue is fully redefining the sketch once its been moved. maybe and additional idea for a future video! Cheers thanks again!
Newbie here. Just a few simple projects under my belt. How do you start with a component? When I start designing in F360, my sketch opens in its own sketches folder, not nested under a component. Also, when I copy and move my sketch, the copied sketch doesn't have it's own sketch file under a folder, it stays associated with the original.
how to bind a sketch to a body you are working with. I understand how to get the sketch to be defined on the face of the body plane, but not lock the sketch to the plane that is actively being sketched on. not sure if that makes sense. Thanks for you vids! i have learned a lot.
I think your vids are very intuitive to your audience and i for one appreciate what you're doing...i had a question though what's the difference between using copy and paste and mirror and which one would you recommend?
Great question! it really depends on the use case. Mirror will literally make things opposite...so if you have threads or certain types of parts that can't truly be mirrored then you'll want to copy and paste
Great tutorial! Thanks for sharing.
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
I LOVE THE INFORMATIVE CONTENT, KEVIN!!
(but I only fall asleep to often because of the monotonous and boring voice ... )
Speed on 1.75 and its watchable, without that, takes WAY too long to actually give the info. But the info is there, so thanks!
Good video thanks Kevin
Thanks, Henry! Glad to hear you enjoyed it and I appreciate you watching and commenting. Cheers, Kevin :)
Great video, thanks Kevin.
Thanks, TheMoviesfable! As always, I appreciate the support. Wishing you a happy holidays and a happy new year! Cheers, Kevin :)
Kevin, your videos have been a GREAT help in learning Fusion 360. I find them useful in making real objects. I am still very much a beginner, but I am using my beginner knowledge, and your RUclips video's to help the students at my school use Fusion 360. I have one question. I find that using the Create Sketch feature you use at 6:35 does not work for me. I follow you exact steps, but I do not see the planes between the axis displayed so I can click on them. Any idea where I went astray? Thanks
Thanks for the tutorials. When I paste New component, the Sketch is still tired with the original. When I try to edit sketch of the new paste component It send me back to the sketch of the original component. What I want to do is position the new paste component with sketch Dimension. Any advice? Thank you.
It seems like when I paste new a component, and move it to the side so it is no longer "on top" of the original -- and then try and MOVE an element in the underlying sketch geometry of either component, the new component body SHIFTS BACK to its original position in the same spot as the copied one.
This doesn't happen when I change the size of the sketch geometry, just when I try to move elements. So it still seems like its kind of tied. I saw something online about disabling "capture position" but it looked to be an old version of F360 and I cannot find that same option on the most current version. Any thoughts?
OK, so my brain hurts - but not quite es much as it did!
Certainly cleared up some of my confusion even though I try to use project rather than copy/paste.
I think once I've watched this a couple more times I should have this more or less nailed (fingers crossed!).
Hi, Andy. I definitely recommend using Project and Intersect when possible over copying sketches. Generally those are much easier to manage and to help keep models predictable. Cheers, Kevin :)
Gracias son muy buenos tus videos, saludos desde La Paz-
Bolivia
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
Hi. In the section 'Copying one sketch to another sketch' there's a much simpler way to COPY/PASTE the sketch by selecting the sketch (CTRL+C) followed by a CLICK in an EMPTY SPACE then paste (CTRL+V)
Move / Copy Sketch Autodesk Fusion 360 (Works 100%) - Mover / Copiar Sketch (Funciona 100%) ruclips.net/video/hpF06IgYiD0/видео.html
perfect thanks
A nice complimentary video to this one would be on the relatively new derive feature.
Thanks for the suggestion, Jim. I've added that to my video topics list. Cheers, Kevin :)
Thank you.
Thanks!
very useful. Thanks!
hey... nice video, pretty straight forward... still can't do it. For some reason I don't get the paste option while i'm editting the sketch i'm trying to paste to... weird. I can copy the sketch features in the same sketch environment, but can't do it in a different file. Is it a settings thing??
When I try to create copy instead of move, the create copy option is grayed out. I don't understand why.
thank you
I have image of my heat block is there a way of getting the heat block into fusion 360? I need to make a mold for a silicone soak can you help me please please 🙏
Hi, nice video! How I can paste a lot of the same sketch form? I need to paste the same circle in a lot of positions in the same sketch and it's not placed in rectangle or circle pattern. Thx!
I would suggest using either equal constraints or symmetry constraints based on the location spacing. It's hard to say exactly without know what you're sketching...but definitely try to use constraints.
Great video sir.
Please make tutorial for split bodie and mirror
Thanks for the suggsetion, venko sha. I've added that to my video to-do list. Cheers, Kevin :)
@@ProductDesignOnline thanks for reply.i am wanting for your video sir
Thanks for the tutorials.
I have a question about copying a fully defined sketch (ie. constrained and with projections) from one design file to an other. Once you try to introduce the sketch to the second design file sketch, obviously the dimensions are still there but all blue, unconstrained. Now, I thought that logically the sketch was copied all tied together and it was only a matter to link the copied sketch to a known (common) geometry, giving this way an "anchor point" for the copied sketch. But sadly even using the move "point to point" in a fully defined point on the new sketch doesn't anchor the copied sketch and it remains blue... I was doing this to save some time and using the same sketch between different project files. But doesn't seems to work, any suggestion. Thanks
I can Copy, but whenever I right click anywhere else, there's no "Paste" option in the list. Any idea why?
Are you in an active sketch when you try to paste?
@@ProductDesignOnline I had no clue as I'm rather new to Fusion 360, but I did manage to succeed by copying and pasting the lines of the sketch. Thanks anyway!
Clear. No bs. Suscribed.
The fact that Fusion 360 has been around this long and still can't get a simple, intuitive method of copy and pasting things is pretty sad. Autodesk used to make good products.
does this still work? im in sketch mode and cannot get anything to copy. the only option i get is move/copy, with no notion of the word "copy" anywhere else.
Great Video. I have a question, please help.
I've finally been able to copy components from one design to another, but I need the sketches to follow as well so that the copied component can be editable.
How do I do that?
Instead of copying, go to the Data Panel and right-click on a design and select "Insert into Current Design". This will place it in the open/active file. You can break the link if desired, but the entire file/component, including the sketch will be placed there.
I have been trying to copy and paste an object to a new file, but the option for paste doesn't show. @ 8:15
What if there's no option to paste the sketch or create a copy?
When I create a sketch, I can get multiple instances of a structure, but then if I try to copy the copy, move/copy only gives me the "move" option. The "Create copy" is grayed out. I have to do the same thing again multiple times. Surely there's a way to make copies of a copy?
Hey Kevin, I'm commenting because I've got a pretty urgent question about 3D printing. If I needed to print three of the same box but as individual parts, would I have to print the design of the box three times; is there a way to put three boxes on one design and hit print just once? Sorry if it's a dumb question haha
Hi, TheGoldenLlama. You can copy your components or bodies in Fusion 360, to make 3 of the same box. Then, when you have the "Export as STL" dialog open you can select the bodies/components, making sure all 3 are selected.
The second option would be to copy and paste in your 3D printers slicing software. I use Cura, which is pretty simple. You can simply use the standard CTRL/CMD + C and CTRL/CMD + P to copy and paste the box until you have 3. Cheers, Kevin :)
Good stuff Kevin. Can you show how to create textures on solid objects? Say ribs on snake? Or scales on fish mold?
Hi c P. Those types of textures, which I would consider "Complex Patterns," would have to be done in another piece of software and brought into Fusion 360. Fusion 360's parametric nature doesn't do well with things like that because it would have to re-process the pattern any time you make a change that affects it. Autodesk Mudbox can be used in conjunction with F360 - www.autodesk.com/products/mudbox/overview
@@ProductDesignOnline Thanks. Will check it out. I am creating solid shapes in Fusion for making a pourable mold. I have seen where Fusion Cam capabilities has some applicability but seems very limited.
IF I try to use the copy/ paste new for a component into a new design, an error pops up for a brief moment then a copy/move block comes up and asks me to chose what I want copied, basically it fails.
Kevin, Thanks for an awesome Fusion 360 Series that makes learning easy. I would like to see information on making a SVG File like you inserted in your Absolute Beginner Video where you made the 3D stamp with handle. I tried to edit your downloaded SVG file to change the text to fit my use and could not get it to work. Thanks again Kevin
Hi, Gary. Glad to hear you're enjoying my tutorials. I wasn't planning on doing a video on creating an SVG, since that cannot be done within Fusion 360. Scalable Vector Graphics (SVG) can be made in several graphics programs. I use Adobe Illustrator, but a free alternative would be Inkscape. There are many tutorials out there for Inkscape. There are also several SVG creation web apps (some free) if you do a Google search. Cheers, Kevin :)
Okay, thanks for your reply Kevin. I will search for other RUclips Videos on SVG File creation. I use Corel Draw and don't have an issue with creating the graphics portion to the same size as the stamp plate(in Corel Draw), my problem is that when I insert my SVG File into Fusion 360, the scaling is off and my graphic is offset too far and too large to fit the stamp plate. I have looked for scaling controls but haven't found anything that helps yet. Anyway, I am sure that will be covered in the SVG File creation videos. Thanks again Kevin, I am a fan and intend to support and follow you while I improve
@@scabahorn Hi, Gary. Yep, I would recommend that you create the SVG at the size before inserting it into Fusion 360. Since Fusion 360 has limited capabilities with SVGs it will help avoid and errors with trying to scale it. You can, however, click and drag on the corner manipulator icon that is next to your SVG design (While using the Insert SVG feature). That will let you scale the SVG file right in Fusion 360. Cheers, Kevin :)
thanks a lot, great vidio
okay, that was confusing, I'll have to watch it in a different frame of mind,lol.
Hi, Hershal. There's a lot of information to digest... I'm going to add the timestamps (very soon) to make it easier to watch specific parts. Cheers, Kevin :)
Kevin to create a 1 x12 x 1/8" interconnecting steel bar to hold slide rails in place using a series of duplicate top and bottom extruded flanges; should I use the bar as the base and copy and paste in modules of the flanges - or is there a better way ? Thanks Richard Cherry
Hi Richard. When possible, always copy/paste or pattern solid bodies instead of sketches. A good way to think of it...
-Copy/Paste or Pattern Bodies = when each object is technically its own individual part
-Copy/Paste or Pattern Sketches = when all the sketches make up one single part
@@ProductDesignOnline Kevin - Thank You. You just saved me from going down the wrong path and hours of wasted time. As you indicated, I will create a series of separate Components with Bodies, duplicate some, and assemble them into the finished part. I Love THE DETAIL In Your Videos. I Use The Transcripts Extensively. Very Much Thanks Richard
Thanks a lot! Again another great video!
One thing:
I noticed that I can copy bodies from one component to another in the same design file.
Is there any “danger” in doing so? (Like unwanted dependencies or so)
Hi, Max. Yep, you're correct - the main issue with that is that you'll have a broken timeline if you delete the original sketch or assets (planes, sketches, etc) that contains any relationships to that body.
Product Design Online thanks für the response! So I have been lucky until now!
Will avoid it in the future!
Again thanks for the great work you’re doing here!
OK. So if I copy a sketch into another sketch/file, that sketch can no longer be edited?
so clear. It is sad I cannot add more than one thumb up.
haha. Thanks for your support - much appreciated! :)
Dummy question Kevin, if you allow me... I want to duplicate a part I designed on Fusion 360 and copy it to a new file and modify the sketches to make some variation based on the original design. Is it something doable ? Or did I miss something on your video ? Thank you for your future reply.
The easiest way is to open the file, then do a "save as" with a new file name. Then you can edit away as you like with no links to the previous file retained.
Hey Kevin. So I have a design which ultimately looks like a bath shape. In sketch mode I can create the rectangle fine. Then after extruding it next step I shell it. Now I have a rectangular bath. Only I want the underside to be curved. Copying that if a bath. How do I go about doing that? Cheers.
Hi, James. There are many routes to make the bottom curved. The simplest would be to apply fillets to the bottom half before you shell it. If you want a more advanced (defined) curve then I would recommend setting up side profiles, resulting in geometry that can be used with the Loft command (instead of Extrude). Cheers, Kevin :)
Thanks for the reply and wish you Merry Xmas Kevin. Ok so I did it. Slightly rudimentary maybe but still. I went about it a different way the next day. What I did was to sketch it out and then do the curve underside first. Then to shell it and not the other way around. Then unside the bath shape I used the press and pull function till I had the floor of it flat. Once achieved I began creating the circles and wxtruding them for my rotary drive unit im copying which is on the table in front of me.
Big question. How do I stop fusion flipping my on screen design which happens regularly. Turns it 180 degrees so I have to then readjust it. Very annoying.
@@jamesbarratt593 Hi James. Unfortunately, there is not currently a setting or way to have that flipping issue turned off without turning off the entire "Auto look at sketch" feature. However, if you turn that off entirely then you will have to look at the sketch manually (with the viewcube or display settings) each time.
A feature to do so was requested on the idea station a couple of years ago. I remember as this sometimes annoys me as well...but they obviously haven't implemented a solution yet.
Wishing you a Merry Xmas and a happy new year! Cheers, Kevin :)
Dude that is a game changer. If I have to endure that repeatedly I am sure it will annoy me so much that I wont want to use it so much. How stupid that it does it.
Anyway we shall see.
Then say that you have a face you want to press pull to close an edge and you just cant get to it for the sides of a box in your way, is there a solution. Can you click on a side of a box and temporarily hide it like in system analysis so you can fix the place you want to fix?
@@jamesbarratt593 You would want to use the "Section Analysis" from the "Inspect" dropdown menu to essentially temporarily cut away the parts of your model that are in the way. The nice thing about section analysis is you can hide/show it in the Browser, so you can turn that on and off as needed.
How do you copy text to display on front and back ?
why is the 'copy box' often greyed out or simply missing?
Hi Richard. Are you referring to when using the copy function of "Move/Copy" command? If so, here's the reason - knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/Create-copy-command-missing-from-the-Move-dialog-within-Fusion-360.html
Any tips to paste constrained sketches so the new pasted version is still constrained? Seems every time I paste a sketch, the lines turn blue. Everything looks the same but if I try to move the sketch around using constraints, everything goes bonkers...
I would suggest copy/paste a component with the desired sketch (if possible). Constraints should copy with, but it's hard to say without seeing it. You will have to constrain the new copy/pasted sketch to the origin point of the new sketch.
@@ProductDesignOnline Thank you!
Me, “Why would you need 17 min video ON how to do Copy and Paste?” (After 17 min) sh!t, 17 min isn’t enough. Tell me more! TEACH ME MOREEEEEEEEEEEEEE!
Copy and pasting in Fusion 360 confuses A LOT of people :')
me too
You are very good
Thanks, Alessio! Cheers :)
@@ProductDesignOnline seriously, there are many people on RUclips with fusion videos and many are good, but yours are so clear, to the point, and you still manage to explain the details. Superb
I followed some instruction and made public my file, so lets see if it worked.
Great video! One thing I've noticed when I copy items is that the number of items selected increases as you copy/paste. See 6:48 mark. You have a square and three circles, but it has copied 62 items. Why does it do that?
Great question, Ted. I should've talked about that more in the video...but that is because you're not just selecting and copying the square and circles, but ALL of the sketch constraints and sketch entities as well. That means any sketch point, constraint, or anything else selected will be copy and pasted.
By the way, thanks again for the coffee :)
Cheers, Kevin
@@ProductDesignOnline Just saw this, thanks and keep up the great work!
I want to be able to duplicate a component and then be able to modify the underlying sketch without affecting previous components that also used that sketch.. how do I do that? ie. tell the new component to make a copy of the sketch that I can edit. When I created a new "paste new" component, there is no history or any sketch associated with it. Seems to just be "base feature"
There should be a sketch as long as the Sketch is nested underneath that component before you copy it. Can you double-check that the sketch is in the correct place?
@@ProductDesignOnline no... no sketch "underneath" - if you mean below or inside it in tree - i have main tree base then separate branches for Sketches, Bodies - I'm not sure if this is correct or not, but that's where F360 seems to put things by default. The component I am trying to copy is an extruded sketch, which then gets further shaped by another extruded body from another sketch (using Cut method). I then I think used "make component from body" on finished piece to separate it out on tree and make it possible to save as STL separately. The entire history of making it is basically throughout the Timeline history. Anyway I gave up trying to copy/modify it - just ended up having to rebuild the new version of component by starting from beginning again.... copied the two underlying sketches and modified to new shapes, then extruded and cut them again. Very slow having to do all again, just to make slight modification to shape of original component 😞
GREATTTTT
I select a body, hit 'M'; I'm offered a move/copy box. Sometimes the 'create copy' box is available to check, sometimes it's greyed out. Why?
Other functions seem to appear/perform randomly!?!
I understand that it can feel random, but there is a method to the madness... There are just a lot of variables at play. Most importantly is whether or not your component is active and whether or not the bodies are grouped underneath the components. Second, the timeline marker needs to be all the way at the end of the timeline because of parametric modeling.
@@ProductDesignOnline But I hit 'M' once, & the box is grey, I hit it again, (or for the umpteenth time!) & it's available - or not! I cannot see what I'm doing differently.
Other things seem similarly random, & for no apparent reason, (e.g. rotate; + or - angle?)
I dont understand why they don't implement "paste as new sketch" = just copy with no relation to previsou. same as I can do it manualy by creating new sketch and copy everything inside of previous.
Hey Kevin, does copying and pasting need a 17 minute video? tighten it up homes
Please make another video explaining 3:08 Move Type.
Hi, Paul. Thanks for the suggestion. I do have it on my video topics list to cover the best ways to Move/re-orient bodies/components...so I will definitely try to do that at some point! Cheers, Kevin :)
How do you copy a body and keep all its history. So for example I can change an extrude I made on the original body but on the new one not the original.
You can't do that with bodies, only Components. You would need to use the "Paste New" option when copy/pasting a Component.
@@ProductDesignOnline so if I create a component from body then copy the component and paste new it will retain all parametric timelines that apply to it and copy that timeline over as well so I can individually change the history only affecting that part?
at 6:45 why is the pasted sketch upside down?
Is there an option to copy components with mates like in solidworks?
Unfortunately, not at the moment. You can however use/copy subassemblies that have joints... Just not individual components.
I use project sketch. I did find one issue, I cannot project a sphere to a sketch.
Hi Mike. You can project a Sphere to a sketch if you switch the Project command to "bodies." In the project dialog, you will need to select "bodies" for the "Selection Filter". It defaults to the "specified entities" option. Cheers, Kevin :)