Instant "like" because the video started with "tip number one..." and the rest of the video is what the title says. No annoying intros 10 seconds long, no yapping BS, just clear information as described in the title. I'm also commenting mostly for the algo because this is the type of content maker that should be supported. Thank you Austin.
@@Jacob-ol3zbIkr. I really dislike how content creators say "before you watch, leave a like", like, idk what I'm even liking. And "like" suddenly lost it's meaning xD
I wish everyone made YT videos like this. 100% pure and relevant information the whole time. Seems like 99% of people make 10 minute videos that "explain" something that that can be summarized in 20 seconds.
Perfect! I am using F360 over four years now and I agree with all of these recommendations! I would add two more recommendations: 1. Use parameters - move key parameters to variables to change model in the future 2. If you design supposed to be parametric - from time to time go back it timeline and change key parameters to check that it does not ruin anything
If you’re starting out using Fusion, then I’d recommend watching everything on this channel, but particularly this video and applying the 10 rules to everything you model. It’ll save you hours and hours of pain down the track. So good.
Being in design and engineering for 38 years and using from Mylar to NX and Catia you have given the best advice I have ever heard. Thank you for the outstanding advice and demo in fusion I have seen. Keep them coming please!!
Austin, as a guy new to Fusion 360 (and CAD in general) I find your basic instruction stuff terrifically clear and useful. I struggle with what should be simple things, so your basic how-to videos are great for me. i hope you keep them coming. -- Hank
Your tip about “make everything as a component” would be much higher on the list and for me as a long time F360 user, it would be number 1. When I get into trouble it’s because I started out thinking this will be simple so no need for components; bodies will be fine. Then when I try to go back and make my bodies into components, it is often impossible to move the base sketches into the component because some other body is dependent upon the sketch so it has to remain at the top level - and things get only get uglier from there. I have started some fairly complex projects over from scratch because of this mistake. Think components, components, components.
This! I also go into things thinking that they'll be fairly simple but actually getting into the rhythm of setting up a component correctly would have saved me pretty much every time! I need to practise this much more.
This is an amazing video! I hadn't fully realized how important mastering the sketching environment is and I hadn't even thought about layering modelling types and processes into certain levels to follow. The tips here are invaluable regardless of ones skill level with Fusion. Tip #7, #8 & #9 were tips I had learned on my own while working with Fusion, as my former school recommended it, but didn't show any great tutorials on getting started, so I essentially had to learn everything myself and those three tips were some of the things I discovered along the way, but the fact that they're here and made me nod while you explained them, is fantastic, as I now know I made the right call. Tip #10 is probably, imo, the most important of them all, as if you don't have the mindset of an engineer when using CAD, then you're gonna have a tough time. So to sum the mindset up: Problems only exist to be solved and solving them is your joy. Also, look at problems like a you'd look at a jigsaw puzzle. The pile itself is a mess, but every individual piece is simple and easy to grasp. Don't try to solve everything at once. Do it piece by piece.
I had to watch the 3D sketch section about 10 times to follow what you did re the intersection, but I'm glad I did, it really helped me place and dimension cables & tubes properly in my design.
What a great tutorial! music and voice sound levels was good and the tips was fantastic. Been doing fusion 360 for many years and only now am i trying to learn how to use it properly. Thank you for this video
Very nice video, I'm learning fusion so I can make functional parts for 3d printing as a hobby, and keeping an eye on these things will help me a lot along the road. Hey I'm so new to this that I didn't even knew about the loft and sweep tools and many other things. Thank you.
I am very much having to relearn 3D modeling from scratch… To top it off, this is just an offshoot of a hobby, as I switched away from mechanical design, to electronics nearly 20 years ago… So I am jumping into a whole new world in design philosophy with all the development the design programs have gone through. I am learning, slowly shifting my design brain from 2D design space. These kind of videos really show how different current 3D modeling SW is. I spent several years working with 2D CAD, and could burn through a project quickly. I was quite proud that I could work much faster than more experienced guys… I loved the process, and took the time to layout the design space/tools for efficiency. Then I learned early 3D modeling when AutoCAD 2000 was released… Where 3D modeling was heavily derived from the 2D space. But I enjoyed working with the 3D modeling, because I could often times design a part in 3D, and use the automated schematic generator built into AutoCAD to create the 2D drawings… Faster than I could draft it out. But that work was very much focused on hard dimensions, being an extension of the 2D design spaces. I am also very vague on the particulars, as I only used it for about a year, so the techniques were not as hard ingrained as the 2D was. Also learned a bit about new schematic and dimension layouts for CNC work, where critical dimensions are based on a fixed origin point rather than traditional length/height/width measurements… That one was an offshoot of work, where a tech in the field needed to know some dimensions for an adapter plate, as the one they received seemed to be out of spec, as it would not line up… Dug up our design documents, and was confronted with a very different schematic dimension layout than I am used to. Definitely one set up for programming CNC… I’m getting too old for this… heh…
Awesome video. Lots of good reasoning behind each tip. I know this is almost splitting hairs, but I prefer the adage “Form follows function” since it doesn’t place function higher than form, it simply states that form should only come after the function has been established. After that, you can go wild with all the form you want.
BRILLIANT!! Can you *please* do a corresponding "10 Tricks" version? You know, stuff like performing patterns on things in the timeline, or having parameters that can be zero, or using units in expressions, or even just smartypants expressions themselves (like logic), or anything "cool" you've learned or discovered that gets you out of tricky situations ...
Excellent stuff. I was aware of some - but not all of this. I've absolutely made the error of setting dimensions a lot more than i probably ought to have. Will dive into use of constraints a lot more.
I seriously had to take a few breaks, although it was only 12,5mins, because I became too excited. Pretty much every sentence was packed with information. I really wish youtube would start to implement some kind of "skill meter", not only as in skills in whatever the tutorial is about, but in the tutorial itself as well. Amazing. No nonsense here. Saved and subscribed.
Sometimes changing previous stuff in the timeline will break the timeline, but the easiest thing to do is use "Compute all" sometimes the software takes the easy way out when it comes to computing certain tool. Sometimes forcing the whole model to recompute would fix that problem, it helps with the headache. Or you can go back in the timeline and go forward a few operations at a time.
Thank you so much for your videos Austin, they have helped me learn Fusion 360 and now I can do my own guitars better. There is still a lot to learn but loving the challenges it gives.
Absolutely underated video. The irony is newbies will not appeciate the depth of what you are saying ... While the veterans would be ike "duuuuuddde ... where were you when I deployed !!? LOL
Tip 3 surprised me at first but then clicked perfectly. I've been trying to learn surface modeling and 3D sketching just feels clunky. Using an intersection curve between two orthogonal 2D sketches makes so much sense.
You got a new sub tonight as you brought to light something I didn't even realize was possible! I was nodding my head to #8 and I've been naming my sketches and components for some time but I didn't know you could pick names down in the timeline! This will be a game changer as just like in the browser it will make finding what I need to tweak so much faster. thanks!
Construction planes make excellent parametric references. You can always go back in time and create new construction planes at the start without breaking anything.
Good tips, and i'm glad that i already employ most of them in my usual workflow. But one huge addition is necessary: User Parameters! After learning that Sketches should be my #1 step for every design, i soon after learned that using User Parameters for those Sketches are more like #1.1 than #2 ;-)
great video, problem is im too much of a newbie to understand most the stuff you were doing. maybe in a few months from now I can look back on this video
The Best Fusion 360 video ever !!!!! You should make advanced project based tutorial. Really wished there were website or some sort of resource , which would provide exercises with increasing complexity ; so anyone could start with a cube and after many many exercises late, exit as a pro.
Wow amazing video covering this tool. I had only ever used Solid or Sketch. I didn't even know the Mesh, Surface, Sheet Metal and Utilities were buttons. I hate this new Metro design programmers are going for. I'm sure its great once you know how to use the app but I miss the days when you could find all tools from a drop down menu. In my opinion they are moving backwards with a lot of this stuff. If you don't call out that something is a button people will not know they can click it and most likely never will.
I love how almost mellow the school of thought for Fusion360 is. If you can break it down, you can build it. (Although, I guess that's true for any CAD software. It's just Fusion360 is so fluid/intuitive in it's UX.)
It still depends. I was using creo for a long time and nx for a short time. There your model three is your "time travel", and the model itself is the result. You steps doesn't shape the model, instead your steps are the model. It was strange to first work with inventor/creo, since you are working with a model that is a model as it is, you can check to the past, but the model is fine without it.
Hello Austin, nice work, can you please create a more complex object using the technique of the third part of the video "Don't fall into the 3D sketch trap"?. When I want to make a complex shape I always prefer to use Rhino because it is easier to sketch in 3 dimensions, but I really want to see your technique.
Outstanding video. I enjoyed it so much that I went ahead and subscribed to your channel and I look forward to seeing more of your videos in the future. Thanks for your advice, and I will take it to heart.
Thanks for the video, nice job! Do you have or do you recomend a video for people who starts explaining the use of the components, bodies, sketch etc.. for me is a little bit mess all this. Thanks!
Every and anytime i watch your videos i learn or discover a handful of things i NEED to learn, damn i can endlessly say the knowledge you have put out for my learning process has been mindblowing! Thanks Austin!!!
Thanks! All of my guitar videos cover fusion 360 techniques that can be applied to any other model. Though I do plan on doing more non-guitar stuff in the future. PC is out of commission right now due to overhauling our garage. Hope to have more videos in the next couple weeks.
Yes this is a really good unspoken one. Often a shell should happen after filleting. This one is easily logical, because it is often the only option. But the trick with two extrudes instead of a loft or sweep is one that is harder to explain and teach. So yes certain feature types should have a preference over others. Another one that helped me a lot was to think about how I would manufacture it. For example, if I have only one plane of access from 2.5D machining or 3D printing, then I would try to limit sketches and features added outside of that plane and base all of my referencing within that plane. Also almost all of those features would be extrudes or revolves. If I am turning a part or designing for someone else turning, I would draw it as a sketch with the intent to revolve (as opposed to drawing axially to extrude) and put operations from one side on one sketch and then operations after flipping on another sketch. This way they remain logically separate and you don't end up doing something that looks cool but can't be fabricated
Hi Austin, I like your videos and tutorials a lot. Thx for sharing your knowledge. The design of your CNC mill looks very interesting, too. Would you share those design files or only the drawings? Cheers, Klaus
I am a complete beginner in 3D. My goal is to learn modeling mainly focused on 3D printing. Small parts and toys right now and all just as a hobby but I do have already a few ideas what I could focus on later to make some money. I started researching different software and Fusion 360 is something that I think would be a good start. Your video caught my eye and that is why I want to ask you a couple things. Hopefully you would not mind helping me. #1 Is Fusion 360 the best way to start? and #2 How should I start learning it on my own without paying somebody else for tutoring? Thank you.
Learning a new skill is always a good thing. 👍🏻 If you are looking for an easy path into 3d modeling, I would suggest Google sketchup (free version). It is a very straightforward software compared to something like fusion, inventor, solidworks etc. Sketchup will give you a basic understanding of how 3d modeling works, and the skills you pick up there will be (mostly) transferrable to other software. But if you want to learn a professional level software like fusion, it's definitely worth the investment of your time. Short of some niche engineering/product design specific features, The free version of Fusion has the same modeling capability as packages WAY higher in price (tens of thousands $$). It's pretty damn hard to beat. As for learning resources, I would suggest RUclips videos to get you started. Look for videos focused on the basics, like sketches, simple extrude/revolves etc. Get used to the interface, and the general workflow (create sketch on "X" plane, turn that sketch into 3d via a feature like extrude, revolve, sweep etc. Once you've got the basics under your belt. Start playing around with the other features, read the tool tips carefully on how yo implement them, and if you run into issues... back to RUclips. There are of course some paid courses online that can guide you through this in a more structured way, if that's the path you'd like to take.
So informative @austin! I love the concept, try to build something you love, you will learn more and stay interested. I am doing Cam on Ambrosia, my design. But NO, I saw your easy belly carve video! LOL Now, I’m thinking she needs some curves out back! Thanks for sharing all that knowledge again, Brother
Good video. Another tip. Know what features in your file's timeline depend on other features. That way, you avoid unwanted results when you need to suppress or delete something.
@@austinshaner It would be good to have some kind of feature in Fusion to identify dependencies like that and maybe group or reorder them. For me I often manually group or deliberately keep references unlinked. But some kind of referencing UI would be nice so you can quickly identify which features are going to cause issues.
I would also say, "Somwtimes you will be better off re-making a design simply to make things cleaner and more organized." During product design, i often have to design iteratively in such a way that creates a great final product, but is messy as hell. In those circumstances, i remake the model knowing what i now know. It helps especially when working with a customer or in a team.
Great video Austin. I've been using Fusion since around 2018 and love it. I've developed some bad habbits with it that I need to stop doing and one is with sketches. Any chance you could do a video on best practices with sketches. I'm always creating sketches on the same face rather than editing the existing one..
When using the mirror tool inside a sketch and mirroring the feature later on instead lead to the same final geometry, which one should be preferred ? I tend to mirror features because it's easier to go back and edit, while i have no idea how to properly edit a validated sketch that includes mirrors and patterns.
@Austin Shaner I’m new-ish to fusion but really respect your approach. I’m looking to design things like exhaust manifold and intake pipes, so your comment on NOT using 3d sketches interests me. I’m too new to even know what to look for as an alternative, any tutorials or terms I should be looking for?
They have improved the 3D sketch engine since this video. A bit. The thing with 3D sketches is that they’re hard to fully constrain and drive parametrically. I think your use case might be one of the exceptions. I tend to use intersection curves (basically define the path of the desired sketch element on two perpendicular planes, do a third sketch and project -> intersection curves). This involves three sketches total for every one 3D sketch but is often easier and more stable to drive parametrically. There are use cases for 3D sketch, definitely. But for me it’s not one of the first tools I reach for.
When I time travel on a large timeline, I set my position in the timeline just past the feature I'm about to change. Many times I can advance through the features catching the little errors and fix them before the whole timeline eats itself.
Good tip. Go methodically through the timeline to understand how dependency affects the stability of it. Once you get a good understanding of it you start to model your early features in anticipation of what your late features are going to need. This way you can adjust the "sensitivity" of your early features to what you may need later and not break your model as much!
I watched this 5 months ago and realised that I had given a thumbs down then. Now that I rewatch it today I have no idea why I did that and to be honest I think I 100% agree with you. Sorry for this!
Good video thanks for the tips. May I ask how do you learn? Is there a great manual or website of guides out there? When I get stuck I goto youtube which can be great or very hard to pin down my issue and take hours to find a video that has what I need. I love youtube for tutorials but is something more efficient for help?
Hey Austin! Love your content and it's great to see a Fusion 360 wizard out there! I'm hosting another 3D CAD speedmodeling tournament this year, and qualifications run throughout June. Feel free to take a look a LMK if you have any questions - I bet a wizard like you could go pretty far, and it'd be cool to see F360 win it this year (An Onshape user won last year, Inventor 2 years ago, and a SW user the year before that).
Hey Toby, sounds fun! Though my schedule is pretty chaotic this summer so I don't know if I'd be able to commit to certain dates. I'll be watching it for sure though!
@Austin Shaner, Excellent video!! Thanks!. One question please. Is there a way to change/brighten/darken the colors of the various tools showing up esply during selecting/sketching? For example I find it near impossible to see the small square that shows up when the mouse pointer goes over a point. There are many other areas where I struggle, his is just an example. nb: I have partial color blindness (the usual red/green effect that many men have, thanks to women who carry it to next generation boys).
im getting better at sketching. new to the program. but man do i feel WAY more comfortable working in 3D vs trying to sus out wtf im trying to do to warp some 2D lines into a 3D object. i wish i had a VR environment where i could mold with clay or something. but i also come from metal and wood working so i really like.. NEED that 3D space to prototype and just feel out what im doing. im not as good in the software space as i am with even just a welder and plasma cutter or router table - much less some bridgeports
I got fusion 360 recently. I somehow missed the new component button and made this one toy I wanted to try and model in various pieces among various projects. Is there a way to try and assemble them together. I'm glad I found out about components before trying to give it moving parts but I also worry that I should dont understand the limits of 3d printers.
At the bottom of the screen where you change your display settings, under environment, there is a new one. I think it's called blue river or something to that effect. I'm not at my pc right now to double check. It's a great environment because it still keeps the model textures nice and bright, and the color scheme for lines/dimensions isn't difficult to see.
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Instant "like" because the video started with "tip number one..." and the rest of the video is what the title says. No annoying intros 10 seconds long, no yapping BS, just clear information as described in the title. I'm also commenting mostly for the algo because this is the type of content maker that should be supported. Thank you Austin.
Normally I’d say that liking a video before you’ve finished watching it is bad but I fully support/agree with what you’re saying.
Agreed!!
Same here 👍👍👍
@@Jacob-ol3zbIkr. I really dislike how content creators say "before you watch, leave a like", like, idk what I'm even liking.
And "like" suddenly lost it's meaning xD
Hahahha facts! Straight to it. No 20 min intro explaining that You can Design things on it
I wish everyone made YT videos like this. 100% pure and relevant information the whole time. Seems like 99% of people make 10 minute videos that "explain" something that that can be summarized in 20 seconds.
indeed
Perfect! I am using F360 over four years now and I agree with all of these recommendations! I would add two more recommendations:
1. Use parameters - move key parameters to variables to change model in the future
2. If you design supposed to be parametric - from time to time go back it timeline and change key parameters to check that it does not ruin anything
I especially like the "Only dimension what you need" part... 😀 😀
thank you for teaching a skill that is boosting my engineering career
If you’re starting out using Fusion, then I’d recommend watching everything on this channel, but particularly this video and applying the 10 rules to everything you model. It’ll save you hours and hours of pain down the track. So good.
Being in design and engineering for 38 years and using from Mylar to NX and Catia you have given the best advice I have ever heard. Thank you for the outstanding advice and demo in fusion I have seen. Keep them coming please!!
Thank you for a no-nonsense high quality tutorial
Austin, as a guy new to Fusion 360 (and CAD in general) I find your basic instruction stuff terrifically clear and useful. I struggle with what should be simple things, so your basic how-to videos are great for me. i hope you keep them coming. -- Hank
SO MUCH HELP IN ONLY 12 MINUTES, love the quality of excplanation in every way !
this is great. I work on guitar repairs, setups, and rebuilds. Looking to CNC'ing my first guitar neck. This inspired me!!!!!!!
Your tip about “make everything as a component” would be much higher on the list and for me as a long time F360 user, it would be number 1. When I get into trouble it’s because I started out thinking this will be simple so no need for components; bodies will be fine. Then when I try to go back and make my bodies into components, it is often impossible to move the base sketches into the component because some other body is dependent upon the sketch so it has to remain at the top level - and things get only get uglier from there. I have started some fairly complex projects over from scratch because of this mistake. Think components, components, components.
This! I also go into things thinking that they'll be fairly simple but actually getting into the rhythm of setting up a component correctly would have saved me pretty much every time! I need to practise this much more.
This is an amazing video! I hadn't fully realized how important mastering the sketching environment is and I hadn't even thought about layering modelling types and processes into certain levels to follow. The tips here are invaluable regardless of ones skill level with Fusion. Tip #7, #8 & #9 were tips I had learned on my own while working with Fusion, as my former school recommended it, but didn't show any great tutorials on getting started, so I essentially had to learn everything myself and those three tips were some of the things I discovered along the way, but the fact that they're here and made me nod while you explained them, is fantastic, as I now know I made the right call. Tip #10 is probably, imo, the most important of them all, as if you don't have the mindset of an engineer when using CAD, then you're gonna have a tough time. So to sum the mindset up: Problems only exist to be solved and solving them is your joy. Also, look at problems like a you'd look at a jigsaw puzzle. The pile itself is a mess, but every individual piece is simple and easy to grasp. Don't try to solve everything at once. Do it piece by piece.
I had to watch the 3D sketch section about 10 times to follow what you did re the intersection, but I'm glad I did, it really helped me place and dimension cables & tubes properly in my design.
this definitely need more views! Working with Fusion for 4 years now and still learned some tweaks. keep up the great work and cheers from germany
came back to watch this again when returning to the program. this is a great way to reorient to best practices.
I love how the body flows into the neck on the underside of that guitar! looks so comfortable
What a great tutorial! music and voice sound levels was good and the tips was fantastic. Been doing fusion 360 for many years and only now am i trying to learn how to use it properly. Thank you for this video
Very nice video, I'm learning fusion so I can make functional parts for 3d printing as a hobby, and keeping an eye on these things will help me a lot along the road. Hey I'm so new to this that I didn't even knew about the loft and sweep tools and many other things. Thank you.
I am very much having to relearn 3D modeling from scratch…
To top it off, this is just an offshoot of a hobby, as I switched away from mechanical design, to electronics nearly 20 years ago… So I am jumping into a whole new world in design philosophy with all the development the design programs have gone through.
I am learning, slowly shifting my design brain from 2D design space.
These kind of videos really show how different current 3D modeling SW is.
I spent several years working with 2D CAD, and could burn through a project quickly. I was quite proud that I could work much faster than more experienced guys… I loved the process, and took the time to layout the design space/tools for efficiency.
Then I learned early 3D modeling when AutoCAD 2000 was released… Where 3D modeling was heavily derived from the 2D space. But I enjoyed working with the 3D modeling, because I could often times design a part in 3D, and use the automated schematic generator built into AutoCAD to create the 2D drawings… Faster than I could draft it out.
But that work was very much focused on hard dimensions, being an extension of the 2D design spaces. I am also very vague on the particulars, as I only used it for about a year, so the techniques were not as hard ingrained as the 2D was.
Also learned a bit about new schematic and dimension layouts for CNC work, where critical dimensions are based on a fixed origin point rather than traditional length/height/width measurements… That one was an offshoot of work, where a tech in the field needed to know some dimensions for an adapter plate, as the one they received seemed to be out of spec, as it would not line up… Dug up our design documents, and was confronted with a very different schematic dimension layout than I am used to. Definitely one set up for programming CNC…
I’m getting too old for this… heh…
Awesome video. Lots of good reasoning behind each tip.
I know this is almost splitting hairs, but I prefer the adage “Form follows function” since it doesn’t place function higher than form, it simply states that form should only come after the function has been established. After that, you can go wild with all the form you want.
BRILLIANT!! Can you *please* do a corresponding "10 Tricks" version? You know, stuff like performing patterns on things in the timeline, or having parameters that can be zero, or using units in expressions, or even just smartypants expressions themselves (like logic), or anything "cool" you've learned or discovered that gets you out of tricky situations ...
Excellent video, great presentation, concise explanation. What a breath of fresh air! Thank you!
What a brilliang tutorial!! Straight to the point. You are hammering that knowledge straight into our brains!
Excellent stuff. I was aware of some - but not all of this. I've absolutely made the error of setting dimensions a lot more than i probably ought to have.
Will dive into use of constraints a lot more.
I seriously had to take a few breaks, although it was only 12,5mins, because I became too excited. Pretty much every sentence was packed with information. I really wish youtube would start to implement some kind of "skill meter", not only as in skills in whatever the tutorial is about, but in the tutorial itself as well. Amazing. No nonsense here. Saved and subscribed.
Sometimes changing previous stuff in the timeline will break the timeline, but the easiest thing to do is use "Compute all" sometimes the software takes the easy way out when it comes to computing certain tool. Sometimes forcing the whole model to recompute would fix that problem, it helps with the headache. Or you can go back in the timeline and go forward a few operations at a time.
Thank you so much for your videos Austin, they have helped me learn Fusion 360 and now I can do my own guitars better. There is still a lot to learn but loving the challenges it gives.
I couldn't agree more. A component for each new part you need is sciential
Absolutely underated video.
The irony is newbies will not appeciate the depth of what you are saying ...
While the veterans would be ike "duuuuuddde ... where were you when I deployed !!? LOL
Tip 3 surprised me at first but then clicked perfectly. I've been trying to learn surface modeling and 3D sketching just feels clunky. Using an intersection curve between two orthogonal 2D sketches makes so much sense.
You got a new sub tonight as you brought to light something I didn't even realize was possible! I was nodding my head to #8 and I've been naming my sketches and components for some time but I didn't know you could pick names down in the timeline! This will be a game changer as just like in the browser it will make finding what I need to tweak so much faster. thanks!
Construction planes make excellent parametric references. You can always go back in time and create new construction planes at the start without breaking anything.
Wait... a video tutorial that starts right away, without any bs introduction, strait to the point??? How could this be real in 2023???
Awesome!
Hey, I haven't started using this software, but this is exactly the video I was looking for. Thank you.
Good video. Been using CAD in one form or another since 2002, and I agree with every fusion360 tip outlined here.
I appreciate your thinking and strategy, the presentation is clear and helpful, thank you!
Austin you’re putting out a lot of value. Thank you!!
Good tips, and i'm glad that i already employ most of them in my usual workflow. But one huge addition is necessary: User Parameters!
After learning that Sketches should be my #1 step for every design, i soon after learned that using User Parameters for those Sketches are more like #1.1 than #2 ;-)
great video, problem is im too much of a newbie to understand most the stuff you were doing. maybe in a few months from now I can look back on this video
I'm a beginner at fusion but I'd like to learn to design guitars too! The wood grain guitar was pretty sweet looking!
you deserve at least half a million subs! this is pure gold. Please keep on creating valuable content, a lot of us need you! :)
Brilliant no bs content. Much appreciated
Great video! Especially function first, had not seen anyone else name there sketch's, will put that into practice on my next design.
I love all the guitar models. We used fusion 360 in high school specifically to design electric guitars lol.
Dude this video is top notch. 10/10, we need more of that
The Best Fusion 360 video ever !!!!! You should make advanced project based tutorial. Really wished there were website or some sort of resource , which would provide exercises with increasing complexity ; so anyone could start with a cube and after many many exercises late, exit as a pro.
Wow amazing video covering this tool. I had only ever used Solid or Sketch. I didn't even know the Mesh, Surface, Sheet Metal and Utilities were buttons. I hate this new Metro design programmers are going for. I'm sure its great once you know how to use the app but I miss the days when you could find all tools from a drop down menu. In my opinion they are moving backwards with a lot of this stuff. If you don't call out that something is a button people will not know they can click it and most likely never will.
Well, i wish this existed 2 yeats ago. I had to learn most of this myslef to get my certification. Good video with great points.
I would pay for a full fledge fusion360 course by this guy.
I love how almost mellow the school of thought for Fusion360 is. If you can break it down, you can build it.
(Although, I guess that's true for any CAD software. It's just Fusion360 is so fluid/intuitive in it's UX.)
It still depends. I was using creo for a long time and nx for a short time. There your model three is your "time travel", and the model itself is the result. You steps doesn't shape the model, instead your steps are the model.
It was strange to first work with inventor/creo, since you are working with a model that is a model as it is, you can check to the past, but the model is fine without it.
Amazing delivery, thank you!
Thank you for making this video.
I just found your channel and look forward to learning more about fusion 360 from it.
wow, just crisp and very very helpful. Thanks a lot.
Excellent video Austin, with an understanding like this you should be a part of the Fusion team!
Hello Austin, nice work, can you please create a more complex object using the technique of the third part of the video "Don't fall into the 3D sketch trap"?. When I want to make a complex shape I always prefer to use Rhino because it is easier to sketch in 3 dimensions, but I really want to see your technique.
Outstanding video. I enjoyed it so much that I went ahead and subscribed to your channel and I look forward to seeing more of your videos in the future. Thanks for your advice, and I will take it to heart.
Thanks for the video, nice job! Do you have or do you recomend a video for people who starts explaining the use of the components, bodies, sketch etc.. for me is a little bit mess all this. Thanks!
Glad I stumbled across your channel, this is going to be a great resource for improving my Fusion360 workflow. Great Video!
Every and anytime i watch your videos i learn or discover a handful of things i NEED to learn, damn i can endlessly say the knowledge you have put out for my learning process has been mindblowing!
Thanks Austin!!!
Great video and I Subbed 🤘🤘 Do you have plans for Tutorials or is that basically what you do in your guitar videos?
Thanks! All of my guitar videos cover fusion 360 techniques that can be applied to any other model. Though I do plan on doing more non-guitar stuff in the future. PC is out of commission right now due to overhauling our garage. Hope to have more videos in the next couple weeks.
What a fantastic video, congrats and thank you!
Would love to see a video on how you'd do the 3d stuff you made in the "3d sketch" section without using 3d sketches!
Great video; I have never thought about tool hierarchies where you should try and use one tool before others.
Yes this is a really good unspoken one. Often a shell should happen after filleting. This one is easily logical, because it is often the only option. But the trick with two extrudes instead of a loft or sweep is one that is harder to explain and teach. So yes certain feature types should have a preference over others.
Another one that helped me a lot was to think about how I would manufacture it. For example, if I have only one plane of access from 2.5D machining or 3D printing, then I would try to limit sketches and features added outside of that plane and base all of my referencing within that plane. Also almost all of those features would be extrudes or revolves.
If I am turning a part or designing for someone else turning, I would draw it as a sketch with the intent to revolve (as opposed to drawing axially to extrude) and put operations from one side on one sketch and then operations after flipping on another sketch. This way they remain logically separate and you don't end up doing something that looks cool but can't be fabricated
Hi Austin, I like your videos and tutorials a lot. Thx for sharing your knowledge. The design of your CNC mill looks very interesting, too. Would you share those design files or only the drawings? Cheers, Klaus
Thanks for this just battling with assembly. All these tips will help alot. Cheers
Thanks for the video! Good information!
I am a complete beginner in 3D. My goal is to learn modeling mainly focused on 3D printing. Small parts and toys right now and all just as a hobby but I do have already a few ideas what I could focus on later to make some money. I started researching different software and Fusion 360 is something that I think would be a good start. Your video caught my eye and that is why I want to ask you a couple things. Hopefully you would not mind helping me. #1 Is Fusion 360 the best way to start? and #2 How should I start learning it on my own without paying somebody else for tutoring? Thank you.
Learning a new skill is always a good thing. 👍🏻 If you are looking for an easy path into 3d modeling, I would suggest Google sketchup (free version). It is a very straightforward software compared to something like fusion, inventor, solidworks etc. Sketchup will give you a basic understanding of how 3d modeling works, and the skills you pick up there will be (mostly) transferrable to other software. But if you want to learn a professional level software like fusion, it's definitely worth the investment of your time. Short of some niche engineering/product design specific features, The free version of Fusion has the same modeling capability as packages WAY higher in price (tens of thousands $$). It's pretty damn hard to beat.
As for learning resources, I would suggest RUclips videos to get you started. Look for videos focused on the basics, like sketches, simple extrude/revolves etc. Get used to the interface, and the general workflow (create sketch on "X" plane, turn that sketch into 3d via a feature like extrude, revolve, sweep etc.
Once you've got the basics under your belt. Start playing around with the other features, read the tool tips carefully on how yo implement them, and if you run into issues... back to RUclips.
There are of course some paid courses online that can guide you through this in a more structured way, if that's the path you'd like to take.
Such a great video, thanks for these tips!
So informative @austin! I love the concept, try to build something you love, you will learn more and stay interested. I am doing Cam on Ambrosia, my design. But NO, I saw your easy belly carve video! LOL
Now, I’m thinking she needs some curves out back! Thanks for sharing all that knowledge again, Brother
Quality. Thank you for no "hey guys, blah, blah, blah."
Good video. Another tip. Know what features in your file's timeline depend on other features. That way, you avoid unwanted results when you need to suppress or delete something.
Absolutely, though that does take a lot of experience to understand intuitively.
@@austinshaner It would be good to have some kind of feature in Fusion to identify dependencies like that and maybe group or reorder them. For me I often manually group or deliberately keep references unlinked. But some kind of referencing UI would be nice so you can quickly identify which features are going to cause issues.
What an amazing video thank you.
Great video, thanks 👍
I would also say,
"Somwtimes you will be better off re-making a design simply to make things cleaner and more organized."
During product design, i often have to design iteratively in such a way that creates a great final product, but is messy as hell.
In those circumstances, i remake the model knowing what i now know. It helps especially when working with a customer or in a team.
you should make a mini course this was awesome
excellent content. thanks!
"the past informs the future, the future informs the past"
brilliant
Yeah, this is beautiful
Very good video, thank you
Great video! How do I change my workspace from white to how yours looks?
Ty, amazing video !
Thanks very useful video😊
Great video Austin. I've been using Fusion since around 2018 and love it. I've developed some bad habbits with it that I need to stop doing and one is with sketches. Any chance you could do a video on best practices with sketches. I'm always creating sketches on the same face rather than editing the existing one..
Good vid! I picked up some tricks!
Thinking like an engineer is such a good tip.
When using the mirror tool inside a sketch and mirroring the feature later on instead lead to the same final geometry, which one should be preferred ?
I tend to mirror features because it's easier to go back and edit, while i have no idea how to properly edit a validated sketch that includes mirrors and patterns.
Number 9 all the way!
@Austin Shaner I’m new-ish to fusion but really respect your approach. I’m looking to design things like exhaust manifold and intake pipes, so your comment on NOT using 3d sketches interests me. I’m too new to even know what to look for as an alternative, any tutorials or terms I should be looking for?
They have improved the 3D sketch engine since this video. A bit. The thing with 3D sketches is that they’re hard to fully constrain and drive parametrically. I think your use case might be one of the exceptions. I tend to use intersection curves (basically define the path of the desired sketch element on two perpendicular planes, do a third sketch and project -> intersection curves). This involves three sketches total for every one 3D sketch but is often easier and more stable to drive parametrically.
There are use cases for 3D sketch, definitely. But for me it’s not one of the first tools I reach for.
When I time travel on a large timeline, I set my position in the timeline just past the feature I'm about to change. Many times I can advance through the features catching the little errors and fix them before the whole timeline eats itself.
^ this. I should have mentioned that. Thanks for commenting.
Good tip. Go methodically through the timeline to understand how dependency affects the stability of it. Once you get a good understanding of it you start to model your early features in anticipation of what your late features are going to need.
This way you can adjust the "sensitivity" of your early features to what you may need later and not break your model as much!
I watched this 5 months ago and realised that I had given a thumbs down then. Now that I rewatch it today I have no idea why I did that and to be honest I think I 100% agree with you. Sorry for this!
Excellent
Good video thanks for the tips. May I ask how do you learn? Is there a great manual or website of guides out there? When I get stuck I goto youtube which can be great or very hard to pin down my issue and take hours to find a video that has what I need. I love youtube for tutorials but is something more efficient for help?
Hey Austin! Love your content and it's great to see a Fusion 360 wizard out there!
I'm hosting another 3D CAD speedmodeling tournament this year, and qualifications run throughout June. Feel free to take a look a LMK if you have any questions - I bet a wizard like you could go pretty far, and it'd be cool to see F360 win it this year (An Onshape user won last year, Inventor 2 years ago, and a SW user the year before that).
Hey Toby, sounds fun! Though my schedule is pretty chaotic this summer so I don't know if I'd be able to commit to certain dates. I'll be watching it for sure though!
So great!
@Austin Shaner, Excellent video!! Thanks!. One question please.
Is there a way to change/brighten/darken the colors of the various tools showing up esply during selecting/sketching? For example I find it near impossible to see the small square that shows up when the mouse pointer goes over a point. There are many other areas where I struggle, his is just an example.
nb: I have partial color blindness (the usual red/green effect that many men have, thanks to women who carry it to next generation boys).
im getting better at sketching. new to the program. but man do i feel WAY more comfortable working in 3D vs trying to sus out wtf im trying to do to warp some 2D lines into a 3D object. i wish i had a VR environment where i could mold with clay or something. but i also come from metal and wood working so i really like.. NEED that 3D space to prototype and just feel out what im doing. im not as good in the software space as i am with even just a welder and plasma cutter or router table - much less some bridgeports
I got fusion 360 recently. I somehow missed the new component button and made this one toy I wanted to try and model in various pieces among various projects. Is there a way to try and assemble them together. I'm glad I found out about components before trying to give it moving parts but I also worry that I should dont understand the limits of 3d printers.
Subscribed, but also what setting for that nice blue background
At the bottom of the screen where you change your display settings, under environment, there is a new one. I think it's called blue river or something to that effect. I'm not at my pc right now to double check. It's a great environment because it still keeps the model textures nice and bright, and the color scheme for lines/dimensions isn't difficult to see.